From: sjhill at uclibc.org <sjhill@uclibc.org>
To: buildroot@busybox.net
Subject: [Buildroot] svn commit: trunk/buildroot/toolchain/binutils/2.17.50.0.17
Date: Sun, 24 Feb 2008 16:25:03 -0800 (PST) [thread overview]
Message-ID: <20080225002503.6253D12C6E8@busybox.net> (raw)
Author: sjhill
Date: 2008-02-24 16:25:02 -0800 (Sun, 24 Feb 2008)
New Revision: 21110
Log:
Copy patch needed for dynamic loader strings and config targets.
Added:
trunk/buildroot/toolchain/binutils/2.17.50.0.17/100-uclibc-conf.patch
Changeset:
Copied: trunk/buildroot/toolchain/binutils/2.17.50.0.17/100-uclibc-conf.patch (from rev 21109, trunk/buildroot/toolchain/binutils/2.17.50.0.16/100-uclibc-conf.patch)
===================================================================
--- trunk/buildroot/toolchain/binutils/2.17.50.0.17/100-uclibc-conf.patch (rev 0)
+++ trunk/buildroot/toolchain/binutils/2.17.50.0.17/100-uclibc-conf.patch 2008-02-25 00:25:02 UTC (rev 21110)
@@ -0,0 +1,139 @@
+--- binutils-2.16.91.0.7/bfd/configure
++++ binutils-2.16.91.0.7/bfd/configure
+@@ -3576,7 +3576,7 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+--- binutils-2.16.91.0.7/binutils/configure
++++ binutils-2.16.91.0.7/binutils/configure
+@@ -3411,7 +3411,7 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+--- binutils-2.16.91.0.7/configure
++++ binutils-2.16.91.0.7/configure
+@@ -1270,7 +1270,7 @@
+ am33_2.0-*-linux*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ ;;
+- sh-*-linux*)
++ sh*-*-linux*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ ;;
+ sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+@@ -1578,7 +1578,7 @@
+ romp-*-*)
+ noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
+ ;;
+- sh-*-* | sh64-*-*)
++ sh*-*-* | sh64-*-*)
+ case "${host}" in
+ i[3456789]86-*-vsta) ;; # don't add gprof back in
+ i[3456789]86-*-go32*) ;; # don't add gprof back in
+--- binutils-2.16.91.0.7/configure.ac
++++ binutils-2.16.91.0.7/configure.ac
+@@ -468,7 +468,7 @@
+ am33_2.0-*-linux*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ ;;
+- sh-*-linux*)
++ sh*-*-linux*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ ;;
+ sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+@@ -776,7 +776,7 @@
+ romp-*-*)
+ noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
+ ;;
+- sh-*-* | sh64-*-*)
++ sh*-*-* | sh64-*-*)
+ case "${host}" in
+ i[[3456789]]86-*-vsta) ;; # don't add gprof back in
+ i[[3456789]]86-*-go32*) ;; # don't add gprof back in
+--- binutils-2.16.91.0.7/gas/configure
++++ binutils-2.16.91.0.7/gas/configure
+@@ -3411,7 +3411,7 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+--- binutils-2.16.91.0.7/gprof/configure
++++ binutils-2.16.91.0.7/gprof/configure
+@@ -3419,6 +3419,11 @@
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
++linux-uclibc*)
++ lt_cv_deplibs_check_method=pass_all
++ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
++ ;;
++
+ netbsd* | knetbsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+--- binutils-2.16.91.0.7/ld/configure
++++ binutils-2.16.91.0.7/ld/configure
+@@ -3413,7 +3413,7 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+--- binutils-2.16.91.0.7/libtool.m4
++++ binutils-2.16.91.0.7/libtool.m4
+@@ -739,7 +739,7 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+--- binutils-2.16.91.0.7/ltconfig
++++ binutils-2.16.91.0.7/ltconfig
+@@ -602,6 +602,7 @@
+
+ # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+ case $host_os in
++linux-uclibc*) ;;
+ linux-gnu*) ;;
+ linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+ esac
+@@ -1247,7 +1248,7 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+--- binutils-2.16.91.0.7/opcodes/configure
++++ binutils-2.16.91.0.7/opcodes/configure
+@@ -3579,7 +3579,7 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
next reply other threads:[~2008-02-25 0:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-25 0:25 sjhill at uclibc.org [this message]
2008-02-25 5:50 ` [Buildroot] svn commit:trunk/buildroot/toolchain/binutils/2.17.50.0.17 Ulf Samuelsson
-- strict thread matches above, loose matches on Subject: below --
2007-06-25 10:40 [Buildroot] svn commit: trunk/buildroot/toolchain/binutils/2.17.50.0.17 aldot at uclibc.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080225002503.6253D12C6E8@busybox.net \
--to=sjhill@uclibc.org \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox