[Buildroot] EABI toolchains do not free init in busybox

[Buildroot] EABI toolchains do not free init in busybox

[Brian Austin]

Hello,

I have been building gcc-4.1.1, 4.1.2, 4.2 toolchains for ARM9 EABI with
2.6.20.4 kernel headers from buildroot. I am using daily snapshots of
uClibc as well.

I have tried busybox 1.2.0, 1.4.1, and 1.5.0,  same results.

the files are built in EABI format as well

they build fine and compile all lf my code and generate a ramdisk.

kernel boots, but init does not let go and bring me to a shell.

Has anyone had any success with building EABI toolchains for ARM9 from
buildroot?

I can post my uclibc and buildroot configs if needed.

Thanks,

Brian

[Buildroot] EABI toolchains do not free init in busybox

[Brian Austin]

I get nothing.

freeing init.........

I can pass init=busybox and get the busybox help output, and I can make
a hello world app say hello world,  but it doesnt give me a shell.

I traced it to setting the consoles in busybox init, it seems to die
with snprintf.






On Tue, 2007-05-15 at 14:03 -0500, Christopher Reder wrote:
> I had an issue with something similar where I didn't have console defined
> under dev in my fs.  Probably not what you have, but thought I'd pass it
> along as I had an issue where everything would boot, it would find init, but
> I didn't get anything on the console.  
> 
> What are you seeing as output?
> 
> -----Original Message-----
> From: buildroot-bounces at uclibc.org [mailto:buildroot-bounces at uclibc.org] On
> Behalf Of Brian Austin
> Sent: Tuesday, May 15, 2007 6:16 AM
> To: buildroot at uclibc.org
> Subject: [Buildroot] EABI toolchains do not free init in busybox
> 
> Hello,
> 
> I have been building gcc-4.1.1, 4.1.2, 4.2 toolchains for ARM9 EABI with
> 2.6.20.4 kernel headers from buildroot. I am using daily snapshots of
> uClibc as well.
> 
> I have tried busybox 1.2.0, 1.4.1, and 1.5.0,  same results.
> 
> the files are built in EABI format as well
> 
> they build fine and compile all lf my code and generate a ramdisk.
> 
> kernel boots, but init does not let go and bring me to a shell.
> 
> Has anyone had any success with building EABI toolchains for ARM9 from
> buildroot?
> 
> I can post my uclibc and buildroot configs if needed.
> 
> Thanks,
> 
> Brian
> 
> 
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
> 
> 

[Buildroot] EABI toolchains do not free init in busybox

[Konstantin Kletschke]

Am 2007-05-15 06:15 -0500 schrieb Brian Austin:

> Has anyone had any success with building EABI toolchains for ARM9 from
> buildroot?

Yes. Does your Kernel handle EABI binaries?

Konsti

-- 
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E  A080 1E69 3FDA EF62 FCEF

[Buildroot] EABI toolchains do not free init in busybox

[Brian Austin]

Yea, that was the problem.  I have been building this in an automated
system and I was initially building an OABI kernel, then an EABI kernel,
and the wrong one was being placed in the tftp directory.

my bad.

Thanks



On Wed, 2007-05-16 at 09:35 +0200, Konstantin Kletschke wrote: