[Buildroot] Web Server

[Buildroot] Web Server

[Dan Pattison]

Hello List:

We are using buildroot v2009.02 on a Fedora 10 linux distro. Our 
architecture is for Atmel AT91SAM9G20-EK development board. We want a 
more robust web server than the BOA or Busybox HTTPD. Our main 
requirement is to have the web server make a web browser (IE6, IE7, 
Firefox etc.) display a login/password box. It seems the two mentioned 
web servers do not support this.

Apache seems overkill for our needs, so we wanted to try 
Cherokee-0.98.1:  http://www.cherokee-project.com/

Using /buildroot/scripts/add_new_package.wizard we are able to make our 
package show up in the make menuconfig configurator utility. When we do 
a make from the top level directory we can see Cherokee gets downloaded 
and starts to compile, but it errors out with these errors below:

spawn-fcgi.o: In function 
`fcgi_spawn_connection':                                                                           

spawn-fcgi.c:(.text+0x340): undefined reference to `rpl_malloc'                                                             
collect2: ld returned 1 exit status                                                                                          

make[3]: *** [spawn-fcgi] Error 1                                                                                            

make[3]: Leaving directory 
`/home/ethertek/rms200/buildroot/build_arm/cherokee-0.98.1/contrib'                               

make[2]: *** [all-recursive] Error 1                                                                                         

make[2]: Leaving directory 
`/home/ethertek/rms200/buildroot/build_arm/cherokee-0.98.1'                                       

make[1]: *** [all] Error 2                                                                                                   

make[1]: Leaving directory 
`/home/ethertek/rms200/buildroot/build_arm/cherokee-0.98.1'                                       

make: *** 
[/home/ethertek/rms200/buildroot/build_arm/cherokee-0.98.1/.stamp_built] 
Error 2 

We can see the error: undefined reference to `rpl_malloc', but being new 
to cross compiling, we do not know how to fix it.

Can someone please help us get cherokee to compile for our architecture?

Also, when using the add_new_package.wizard, how do you know when to 
select "Does autoreconf need to be run first?". It did not seem to 
matter in the case of cross compiling Cherokee-0.98.1

Lastly, does anyone know of a different web server for Buildroot that 
will make the most common web browsers (IE6, IE7, Firefox etc) pop up 
the username/password box?

Thank you, and Best Regards,
Dan Pattison


------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.0.233 / Virus Database: 270.10.17/1934 - Release Date: 01/29/09 17:57:00

[Buildroot] Web Server

[Peter Korsgaard]

>>>>> "Dan" == Dan Pattison <dan.pattison@ethertek.ca> writes:

 Dan> Hello List:
 Dan> We are using buildroot v2009.02 on a Fedora 10 linux distro. Our
 Dan> architecture is for Atmel AT91SAM9G20-EK development board. We want a
 Dan> more robust web server than the BOA or Busybox HTTPD. Our main
 Dan> requirement is to have the web server make a web browser (IE6, IE7,
 Dan> Firefox etc.) display a login/password box. It seems the two mentioned
 Dan> web servers do not support this.

Standard http auth? Both busybox httpd and boa supports that.

 Dan> Apache seems overkill for our needs, so we wanted to try
 Dan> Cherokee-0.98.1:  http://www.cherokee-project.com/

We also have lighttpd in busybox, maybe take a look at that.

 Dan> Using /buildroot/scripts/add_new_package.wizard we are able to make
 Dan> our package show up in the make menuconfig configurator utility. When
 Dan> we do a make from the top level directory we can see Cherokee gets
 Dan> downloaded and starts to compile, but it errors out with these errors
 Dan> below:

 Dan> spawn-fcgi.o: In function `fcgi_spawn_connection':                                                                           

 Dan> spawn-fcgi.c:(.text+0x340): undefined reference to `rpl_malloc'
 Dan> collect2: ld returned 1 exit status                                                                                          

Check config.log, you normally have to set a *_cv_func_malloc_* (don't
remember the exact name offhand) variable to not get it to use this
malloc wrapper.

-- 
Bye, Peter Korsgaard

[Buildroot] at91rm9200 toolchain

[Sandeep Kumar]

Hi everybody

I am new to at91rm9200 and i want to know that from where can i get the
toolchain, rootfile system, busybox and kernel + patches for the same.

I will be verythankful to you.

Thanks and regards
Sandeep

[Buildroot] at91rm9200 toolchain

[Peter Korsgaard]

>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:

 Sandeep> Hi everybody

 Sandeep> I am new to at91rm9200 and i want to know that from where
 Sandeep> can i get the toolchain, rootfile system, busybox and kernel
 Sandeep> + patches for the same.

Here I guess? We have an AT91RM9200 target (at91rm9200df_defconfig).

-- 
Bye, Peter Korsgaard

[Buildroot] Urgent : at91rm9200 root file system

[Sandeep Kumar]

Hi

Can antbody tell me from where can i get the root file system (rootfs)
for my AT91RM9200 board. Its very urgent.

Thanks and Regards
Sandeep

[Buildroot] Urgent : at91rm9200 root file system

[Peter Korsgaard]

>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:

 Sandeep> Hi
 Sandeep> Can antbody tell me from where can i get the root file system (rootfs)
 Sandeep> for my AT91RM9200 board. Its very urgent.

Just build it.

make at91rm9200df_defconfig; make

-- 
Bye, Peter Korsgaard

[Buildroot] Urgent : at91rm9200 root file system

[Sandeep Kumar]

Hi Peter,

Thanks once again for your response.

Sorry!!!, I have not understood your reply. I am some what new to this
platform. I am working on a linux machine and i do not have the source
code for the root file system to make it. From where can i get the
source code to build it for at91rm9200. Where should i execute the
command sent by you (make at91rm9200df_defconfig; make) without having
the source code. And if i am making some mistake can you please explain
me in a little bit detail. I will be very thankful to you.

Regards
Sandeep


On Fri, 2009-02-06 at 13:47 +0100, Peter Korsgaard wrote:
> >>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:
> 
>  Sandeep> Hi peter
>  Sandeep> Thanks for reply.
> 
>  Sandeep> For this I want the root file system source code which i
>  Sandeep> dont have. from where can i get it.
> 
> Buildroot will download the sources and build the rootfs for you when
> you run make.
> 

[Buildroot] Urgent : at91rm9200 root file system

[Dan Pattison]

Sandeep:

On the command line; navigate to the folder where you want your build 
environment installed.
Type out this command:   

svn co svn://uclibc.org/trunk/buildroot

It will download the current Buildroot files. Then type out:

make at91rm9200df_defconfig

Then type out:

make

Try that. Also the docs are here

http://buildroot.uclibc.org/buildroot.html

Best Regards,
Dan Pattison


Sandeep Kumar wrote:
> Hi Peter,
>
> Thanks once again for your response.
>
> Sorry!!!, I have not understood your reply. I am some what new to this
> platform. I am working on a linux machine and i do not have the source
> code for the root file system to make it. From where can i get the
> source code to build it for at91rm9200. Where should i execute the
> command sent by you (make at91rm9200df_defconfig; make) without having
> the source code. And if i am making some mistake can you please explain
> me in a little bit detail. I will be very thankful to you.
>
> Regards
> Sandeep
>
>
> On Fri, 2009-02-06 at 13:47 +0100, Peter Korsgaard wrote:
>   
>>>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:
>>>>>>>               
>>  Sandeep> Hi peter
>>  Sandeep> Thanks for reply.
>>
>>  Sandeep> For this I want the root file system source code which i
>>  Sandeep> dont have. from where can i get it.
>>
>> Buildroot will download the sources and build the rootfs for you when
>> you run make.
>>
>>     
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.233 / Virus Database: 270.10.18/1936 - Release Date: 01/29/09 17:57:00
>
>   

[Buildroot] Urgent : at91rm9200 root file system

[Sandeep Kumar]

Hi Pattison

Thanks for reply
I have tried with the commands sent by you but i am getting the
following error:

svn: Can't connect to host 'uclibc.org': Connection refused

Can there be some authorization issue or so.
I am able to access the website uclibc.org from internet. Is there
anyway to download the package from there.

Thanks and regards
Sandeep



On Fri, 2009-02-06 at 07:21 -0800, Dan Pattison wrote:
> Sandeep:
> 
> On the command line; navigate to the folder where you want your build 
> environment installed.
> Type out this command:   
> 
> svn co svn://uclibc.org/trunk/buildroot
> 
> It will download the current Buildroot files. Then type out:
> 
> make at91rm9200df_defconfig
> 
> Then type out:
> 
> make
> 
> Try that. Also the docs are here
> 
> http://buildroot.uclibc.org/buildroot.html
> 
> Best Regards,
> Dan Pattison
> 
> 
> Sandeep Kumar wrote:
> > Hi Peter,
> >
> > Thanks once again for your response.
> >
> > Sorry!!!, I have not understood your reply. I am some what new to this
> > platform. I am working on a linux machine and i do not have the source
> > code for the root file system to make it. From where can i get the
> > source code to build it for at91rm9200. Where should i execute the
> > command sent by you (make at91rm9200df_defconfig; make) without having
> > the source code. And if i am making some mistake can you please explain
> > me in a little bit detail. I will be very thankful to you.
> >
> > Regards
> > Sandeep
> >
> >
> > On Fri, 2009-02-06 at 13:47 +0100, Peter Korsgaard wrote:
> >   
> >>>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:
> >>>>>>>               
> >>  Sandeep> Hi peter
> >>  Sandeep> Thanks for reply.
> >>
> >>  Sandeep> For this I want the root file system source code which i
> >>  Sandeep> dont have. from where can i get it.
> >>
> >> Buildroot will download the sources and build the rootfs for you when
> >> you run make.
> >>
> >>     
> >
> > _______________________________________________
> > buildroot mailing list
> > buildroot at busybox.net
> > http://lists.busybox.net/mailman/listinfo/buildroot
> >   
> > ------------------------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com 
> > Version: 8.0.233 / Virus Database: 270.10.18/1936 - Release Date: 01/29/09 17:57:00
> >
> >   
> 
> 

[Buildroot] Urgent : at91rm9200 root file system

[Dan Pattison]

Hello Sandeep:

The command works on my internet connection/linux computer. Make sure 
you did not make any spelling mistakes. Copy paste the command from the 
docs. Yes you can download the Buildroot package from here: 
http://buildroot.uclibc.org/downloads/snapshots/buildroot-snapshot.tar.bz2

This is all explained in the docs found here:  
http://buildroot.uclibc.org/buildroot.html

Best Regards,
Dan Pattison


Sandeep Kumar wrote:
> Hi Pattison
>
> Thanks for reply
> I have tried with the commands sent by you but i am getting the
> following error:
>
> svn: Can't connect to host 'uclibc.org': Connection refused
>
> Can there be some authorization issue or so.
> I am able to access the website uclibc.org from internet. Is there
> anyway to download the package from there.
>
> Thanks and regards
> Sandeep
>
>
>
> On Fri, 2009-02-06 at 07:21 -0800, Dan Pattison wrote:
>   
>> Sandeep:
>>
>> On the command line; navigate to the folder where you want your build 
>> environment installed.
>> Type out this command:   
>>
>> svn co svn://uclibc.org/trunk/buildroot
>>
>> It will download the current Buildroot files. Then type out:
>>
>> make at91rm9200df_defconfig
>>
>> Then type out:
>>
>> make
>>
>> Try that. Also the docs are here
>>
>> http://buildroot.uclibc.org/buildroot.html
>>
>> Best Regards,
>> Dan Pattison
>>
>>
>> Sandeep Kumar wrote:
>>     
>>> Hi Peter,
>>>
>>> Thanks once again for your response.
>>>
>>> Sorry!!!, I have not understood your reply. I am some what new to this
>>> platform. I am working on a linux machine and i do not have the source
>>> code for the root file system to make it. From where can i get the
>>> source code to build it for at91rm9200. Where should i execute the
>>> command sent by you (make at91rm9200df_defconfig; make) without having
>>> the source code. And if i am making some mistake can you please explain
>>> me in a little bit detail. I will be very thankful to you.
>>>
>>> Regards
>>> Sandeep
>>>
>>>
>>> On Fri, 2009-02-06 at 13:47 +0100, Peter Korsgaard wrote:
>>>   
>>>       
>>>>>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:
>>>>>>>>>               
>>>>>>>>>                   
>>>>  Sandeep> Hi peter
>>>>  Sandeep> Thanks for reply.
>>>>
>>>>  Sandeep> For this I want the root file system source code which i
>>>>  Sandeep> dont have. from where can i get it.
>>>>
>>>> Buildroot will download the sources and build the rootfs for you when
>>>> you run make.
>>>>
>>>>     
>>>>         
>>> _______________________________________________
>>> buildroot mailing list
>>> buildroot at busybox.net
>>> http://lists.busybox.net/mailman/listinfo/buildroot
>>>   
>>> ------------------------------------------------------------------------
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com 
>>> Version: 8.0.233 / Virus Database: 270.10.18/1936 - Release Date: 01/29/09 17:57:00
>>>
>>>   
>>>       
>>     
>
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.233 / Virus Database: 270.10.18/1937 - Release Date: 01/29/09 17:57:00
>
>   

[Buildroot] Urgent : at91rm9200 root file system

[Sandeep Kumar]

Hi Pattison,

I am able to download the source from the link sent by you i.e.
http://buildroot.uclibc.org/downloads/snapshots/buildroot-snapshot.tar.bz2

After giving the "make at91rm9200df_defconfig" command configuration for
my device was successful but after giving the "make" command it is
downloading "linux-2.6.28.3.tar.bz2" which i have already downloaded.

Is there any method to bypass this step and give the path of the
downloaded "linux-2.6.28.3.tar.bz2".

Thanks and Regards
Sandeep


On Fri, 2009-02-06 at 08:02 -0800, Dan Pattison wrote:
> Hello Sandeep:
> 
> The command works on my internet connection/linux computer. Make sure 
> you did not make any spelling mistakes. Copy paste the command from the 
> docs. Yes you can download the Buildroot package from here: 
> http://buildroot.uclibc.org/downloads/snapshots/buildroot-snapshot.tar.bz2
> 
> This is all explained in the docs found here:  
> http://buildroot.uclibc.org/buildroot.html
> 
> Best Regards,
> Dan Pattison
> 
> 
> Sandeep Kumar wrote:
> > Hi Pattison
> >
> > Thanks for reply
> > I have tried with the commands sent by you but i am getting the
> > following error:
> >
> > svn: Can't connect to host 'uclibc.org': Connection refused
> >
> > Can there be some authorization issue or so.
> > I am able to access the website uclibc.org from internet. Is there
> > anyway to download the package from there.
> >
> > Thanks and regards
> > Sandeep
> >
> >
> >
> > On Fri, 2009-02-06 at 07:21 -0800, Dan Pattison wrote:
> >   
> >> Sandeep:
> >>
> >> On the command line; navigate to the folder where you want your build 
> >> environment installed.
> >> Type out this command:   
> >>
> >> svn co svn://uclibc.org/trunk/buildroot
> >>
> >> It will download the current Buildroot files. Then type out:
> >>
> >> make at91rm9200df_defconfig
> >>
> >> Then type out:
> >>
> >> make
> >>
> >> Try that. Also the docs are here
> >>
> >> http://buildroot.uclibc.org/buildroot.html
> >>
> >> Best Regards,
> >> Dan Pattison
> >>
> >>
> >> Sandeep Kumar wrote:
> >>     
> >>> Hi Peter,
> >>>
> >>> Thanks once again for your response.
> >>>
> >>> Sorry!!!, I have not understood your reply. I am some what new to this
> >>> platform. I am working on a linux machine and i do not have the source
> >>> code for the root file system to make it. From where can i get the
> >>> source code to build it for at91rm9200. Where should i execute the
> >>> command sent by you (make at91rm9200df_defconfig; make) without having
> >>> the source code. And if i am making some mistake can you please explain
> >>> me in a little bit detail. I will be very thankful to you.
> >>>
> >>> Regards
> >>> Sandeep
> >>>
> >>>
> >>> On Fri, 2009-02-06 at 13:47 +0100, Peter Korsgaard wrote:
> >>>   
> >>>       
> >>>>>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:
> >>>>>>>>>               
> >>>>>>>>>                   
> >>>>  Sandeep> Hi peter
> >>>>  Sandeep> Thanks for reply.
> >>>>
> >>>>  Sandeep> For this I want the root file system source code which i
> >>>>  Sandeep> dont have. from where can i get it.
> >>>>
> >>>> Buildroot will download the sources and build the rootfs for you when
> >>>> you run make.
> >>>>
> >>>>     
> >>>>         
> >>> _______________________________________________
> >>> buildroot mailing list
> >>> buildroot at busybox.net
> >>> http://lists.busybox.net/mailman/listinfo/buildroot
> >>>   
> >>> ------------------------------------------------------------------------
> >>>
> >>>
> >>> No virus found in this incoming message.
> >>> Checked by AVG - www.avg.com 
> >>> Version: 8.0.233 / Virus Database: 270.10.18/1936 - Release Date: 01/29/09 17:57:00
> >>>
> >>>   
> >>>       
> >>     
> >
> >   
> > ------------------------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com 
> > Version: 8.0.233 / Virus Database: 270.10.18/1937 - Release Date: 01/29/09 17:57:00
> >
> >   
> 
> 

[Buildroot] Urgent : at91rm9200 root file system

[Dan Pattison]

Hello Sandeep:

To skip the file downloading, copy the linux-2.6.28.3.tar.bz2 file into 
the buildroot/dl folder.

Regards,
Dan Pattison

Sandeep Kumar wrote:
> Hi Pattison,
>
> I am able to download the source from the link sent by you i.e.
> http://buildroot.uclibc.org/downloads/snapshots/buildroot-snapshot.tar.bz2
>
> After giving the "make at91rm9200df_defconfig" command configuration for
> my device was successful but after giving the "make" command it is
> downloading "linux-2.6.28.3.tar.bz2" which i have already downloaded.
>
> Is there any method to bypass this step and give the path of the
> downloaded "linux-2.6.28.3.tar.bz2".
>
> Thanks and Regards
> Sandeep
>
>
> On Fri, 2009-02-06 at 08:02 -0800, Dan Pattison wrote:
>   
>> Hello Sandeep:
>>
>> The command works on my internet connection/linux computer. Make sure 
>> you did not make any spelling mistakes. Copy paste the command from the 
>> docs. Yes you can download the Buildroot package from here: 
>> http://buildroot.uclibc.org/downloads/snapshots/buildroot-snapshot.tar.bz2
>>
>> This is all explained in the docs found here:  
>> http://buildroot.uclibc.org/buildroot.html
>>
>> Best Regards,
>> Dan Pattison
>>
>>
>> Sandeep Kumar wrote:
>>     
>>> Hi Pattison
>>>
>>> Thanks for reply
>>> I have tried with the commands sent by you but i am getting the
>>> following error:
>>>
>>> svn: Can't connect to host 'uclibc.org': Connection refused
>>>
>>> Can there be some authorization issue or so.
>>> I am able to access the website uclibc.org from internet. Is there
>>> anyway to download the package from there.
>>>
>>> Thanks and regards
>>> Sandeep
>>>
>>>
>>>
>>> On Fri, 2009-02-06 at 07:21 -0800, Dan Pattison wrote:
>>>   
>>>       
>>>> Sandeep:
>>>>
>>>> On the command line; navigate to the folder where you want your build 
>>>> environment installed.
>>>> Type out this command:   
>>>>
>>>> svn co svn://uclibc.org/trunk/buildroot
>>>>
>>>> It will download the current Buildroot files. Then type out:
>>>>
>>>> make at91rm9200df_defconfig
>>>>
>>>> Then type out:
>>>>
>>>> make
>>>>
>>>> Try that. Also the docs are here
>>>>
>>>> http://buildroot.uclibc.org/buildroot.html
>>>>
>>>> Best Regards,
>>>> Dan Pattison
>>>>
>>>>
>>>> Sandeep Kumar wrote:
>>>>     
>>>>         
>>>>> Hi Peter,
>>>>>
>>>>> Thanks once again for your response.
>>>>>
>>>>> Sorry!!!, I have not understood your reply. I am some what new to this
>>>>> platform. I am working on a linux machine and i do not have the source
>>>>> code for the root file system to make it. From where can i get the
>>>>> source code to build it for at91rm9200. Where should i execute the
>>>>> command sent by you (make at91rm9200df_defconfig; make) without having
>>>>> the source code. And if i am making some mistake can you please explain
>>>>> me in a little bit detail. I will be very thankful to you.
>>>>>
>>>>> Regards
>>>>> Sandeep
>>>>>
>>>>>
>>>>> On Fri, 2009-02-06 at 13:47 +0100, Peter Korsgaard wrote:
>>>>>   
>>>>>       
>>>>>           
>>>>>>>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:
>>>>>>>>>>>               
>>>>>>>>>>>                   
>>>>>>>>>>>                       
>>>>>>  Sandeep> Hi peter
>>>>>>  Sandeep> Thanks for reply.
>>>>>>
>>>>>>  Sandeep> For this I want the root file system source code which i
>>>>>>  Sandeep> dont have. from where can i get it.
>>>>>>
>>>>>> Buildroot will download the sources and build the rootfs for you when
>>>>>> you run make.
>>>>>>
>>>>>>     
>>>>>>         
>>>>>>             
>>>>> _______________________________________________
>>>>> buildroot mailing list
>>>>> buildroot at busybox.net
>>>>> http://lists.busybox.net/mailman/listinfo/buildroot
>>>>>   
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>>
>>>>> No virus found in this incoming message.
>>>>> Checked by AVG - www.avg.com 
>>>>> Version: 8.0.233 / Virus Database: 270.10.18/1936 - Release Date: 01/29/09 17:57:00
>>>>>
>>>>>   
>>>>>       
>>>>>           
>>>>     
>>>>         
>>>   
>>> ------------------------------------------------------------------------
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com 
>>> Version: 8.0.233 / Virus Database: 270.10.18/1937 - Release Date: 01/29/09 17:57:00
>>>
>>>   
>>>       
>>     
>
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.233 / Virus Database: 270.10.18/1937 - Release Date: 01/29/09 17:57:00
>
>   

[Buildroot] Urgent : at91rm9200 root file system

[Sandeep Kumar]

Hi Pattison

I have downloaded buildroot package configured it for at91rm9200 and in
the make i am getting an error which i was unable to fix. Can you please
help me in fixing this bug. One more thing i want to know is that if i
want to build a separate bootloader where i have to make the board
specific changes like ram size, Flash size, boot configuration etc. The
log is as follows:

rm -f include-fixed/README
cp /home/sandeepk/Desktop/buildroot/toolchain_build_arm/gcc-4.3.2/gcc/../fixincludes/README-fixinc include-fixed/README
chmod a+r include-fixed/README
echo timestamp > stmp-int-hdrs
make[2]: Leaving directory
`/home/sandeepk/Desktop/buildroot/toolchain_build_arm/gcc-4.3.2-initial/gcc'
Checking multilib configuration for libgcc...
mkdir -p -- arm-linux-uclibc/libgcc
Configuring in arm-linux-uclibc/libgcc
configure: creating cache ./config.cache
checking for --enable-version-specific-runtime-libs... no
checking for a BSD-compatible install... /usr/bin/install -c
checking for gawk... gawk
checking build system type... x86_64-pc-linux-gnu
checking host system type... arm-unknown-linux-uclibc
checking for
arm-linux-uclibc-ar... /home/sandeepk/Desktop/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-ar
checking for arm-linux-uclibc-lipo... arm-linux-uclibc-lipo
checking for
arm-linux-uclibc-nm... /home/sandeepk/Desktop/buildroot/toolchain_build_arm/gcc-4.3.2-initial/./gcc/nm
checking for
arm-linux-uclibc-ranlib... /home/sandeepk/Desktop/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-ranlib
checking for
arm-linux-uclibc-strip... /home/sandeepk/Desktop/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-strip
checking whether ln -s works... yes
checking for
arm-linux-uclibc-gcc...  /home/sandeepk/Desktop/buildroot/toolchain_build_arm/gcc-4.3.2-initial/./gcc/xgcc -B/home/sandeepk/Desktop/buildroot/toolchain_build_arm/gcc-4.3.2-initial/./gcc/ -B/home/sandeepk/Desktop/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/bin/ -B/home/sandeepk/Desktop/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/ -isystem /home/sandeepk/Desktop/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/include -isystem /home/sandeepk/Desktop/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/sys-include
checking for suffix of object files... configure: error: cannot compute
suffix of object files: cannot compile
See `config.log' for more details.
make[1]: *** [configure-target-libgcc] Error 1
make[1]: Leaving directory
`/home/sandeepk/Desktop/buildroot/toolchain_build_arm/gcc-4.3.2-initial'
make: ***
[/home/sandeepk/Desktop/buildroot/toolchain_build_arm/gcc-4.3.2-initial/.compiled] Error 2


Thanks and Regards
Sandeep


On Fri, 2009-02-06 at 08:02 -0800, Dan Pattison wrote:
> Hello Sandeep:
> 
> The command works on my internet connection/linux computer. Make sure 
> you did not make any spelling mistakes. Copy paste the command from the 
> docs. Yes you can download the Buildroot package from here: 
> http://buildroot.uclibc.org/downloads/snapshots/buildroot-snapshot.tar.bz2
> 
> This is all explained in the docs found here:  
> http://buildroot.uclibc.org/buildroot.html
> 
> Best Regards,
> Dan Pattison
> 
> 
> Sandeep Kumar wrote:
> > Hi Pattison
> >
> > Thanks for reply
> > I have tried with the commands sent by you but i am getting the
> > following error:
> >
> > svn: Can't connect to host 'uclibc.org': Connection refused
> >
> > Can there be some authorization issue or so.
> > I am able to access the website uclibc.org from internet. Is there
> > anyway to download the package from there.
> >
> > Thanks and regards
> > Sandeep
> >
> >
> >
> > On Fri, 2009-02-06 at 07:21 -0800, Dan Pattison wrote:
> >   
> >> Sandeep:
> >>
> >> On the command line; navigate to the folder where you want your build 
> >> environment installed.
> >> Type out this command:   
> >>
> >> svn co svn://uclibc.org/trunk/buildroot
> >>
> >> It will download the current Buildroot files. Then type out:
> >>
> >> make at91rm9200df_defconfig
> >>
> >> Then type out:
> >>
> >> make
> >>
> >> Try that. Also the docs are here
> >>
> >> http://buildroot.uclibc.org/buildroot.html
> >>
> >> Best Regards,
> >> Dan Pattison
> >>
> >>
> >> Sandeep Kumar wrote:
> >>     
> >>> Hi Peter,
> >>>
> >>> Thanks once again for your response.
> >>>
> >>> Sorry!!!, I have not understood your reply. I am some what new to this
> >>> platform. I am working on a linux machine and i do not have the source
> >>> code for the root file system to make it. From where can i get the
> >>> source code to build it for at91rm9200. Where should i execute the
> >>> command sent by you (make at91rm9200df_defconfig; make) without having
> >>> the source code. And if i am making some mistake can you please explain
> >>> me in a little bit detail. I will be very thankful to you.
> >>>
> >>> Regards
> >>> Sandeep
> >>>
> >>>
> >>> On Fri, 2009-02-06 at 13:47 +0100, Peter Korsgaard wrote:
> >>>   
> >>>       
> >>>>>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:
> >>>>>>>>>               
> >>>>>>>>>                   
> >>>>  Sandeep> Hi peter
> >>>>  Sandeep> Thanks for reply.
> >>>>
> >>>>  Sandeep> For this I want the root file system source code which i
> >>>>  Sandeep> dont have. from where can i get it.
> >>>>
> >>>> Buildroot will download the sources and build the rootfs for you when
> >>>> you run make.
> >>>>
> >>>>     
> >>>>         
> >>> _______________________________________________
> >>> buildroot mailing list
> >>> buildroot at busybox.net
> >>> http://lists.busybox.net/mailman/listinfo/buildroot
> >>>   
> >>> ------------------------------------------------------------------------
> >>>
> >>>
> >>> No virus found in this incoming message.
> >>> Checked by AVG - www.avg.com 
> >>> Version: 8.0.233 / Virus Database: 270.10.18/1936 - Release Date: 01/29/09 17:57:00
> >>>
> >>>   
> >>>       
> >>     
> >
> >   
> > ------------------------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com 
> > Version: 8.0.233 / Virus Database: 270.10.18/1937 - Release Date: 01/29/09 17:57:00
> >
> >   
> 
> 

[Buildroot] Urgent : at91rm9200 root file system

[Peter Korsgaard]

>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:

 Sandeep> Hi Pattison I have downloaded buildroot package configured
 Sandeep> it for at91rm9200 and in the make i am getting an error
 Sandeep> which i was unable to fix. Can you please

 Sandeep> checking for suffix of object files... configure: error: cannot compute
 Sandeep> suffix of object files: cannot compile
 Sandeep> See `config.log' for more details.
 Sandeep> make[1]: *** [configure-target-libgcc] Error 1

You're using Ubuntu and don't have mpfr/gmpc installed on the host,
right? I'm looking into the problem right now.

-- 
Bye, Peter Korsgaard

[Buildroot] Urgent : at91rm9200 root file system

[Sandeep Kumar]

Hi pattison,

I am using opensuse 10.2

Thanks and Regards
Sandeep







On Mon, 2009-02-09 at 10:26 +0100, Peter Korsgaard wrote:
> >>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:
> 
>  Sandeep> Hi Pattison I have downloaded buildroot package configured
>  Sandeep> it for at91rm9200 and in the make i am getting an error
>  Sandeep> which i was unable to fix. Can you please
> 
>  Sandeep> checking for suffix of object files... configure: error: cannot compute
>  Sandeep> suffix of object files: cannot compile
>  Sandeep> See `config.log' for more details.
>  Sandeep> make[1]: *** [configure-target-libgcc] Error 1
> 
> You're using Ubuntu and don't have mpfr/gmpc installed on the host,
> right? I'm looking into the problem right now.
> 

[Buildroot] Urgent : at91rm9200 root file system

[Peter Korsgaard]

>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:

 Sandeep> Hi pattison,
 Sandeep> I am using opensuse 10.2

It should be fixed now - Could you update to latest subversion version
(atleast r25269) and try again? (type rm -rf *build_*; make)

-- 
Bye, Peter Korsgaard

[Buildroot] Urgent : at91rm9200 root file system

[Sandeep Kumar]

Hi

How can i update to latest subversion version as "svn" is not working on
my pc (though the internet connection is working fine). Is there any
other way to update the sub verson.

Thanks and regards
Sandeep



On Mon, 2009-02-09 at 14:05 +0100, Peter Korsgaard wrote:
> >>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:
> 
>  Sandeep> Hi pattison,
>  Sandeep> I am using opensuse 10.2
> 
> It should be fixed now - Could you update to latest subversion version
> (atleast r25269) and try again? (type rm -rf *build_*; make)
> 

[Buildroot] Urgent : at91rm9200 root file system

[Peter Korsgaard]

>>>>> "Sandeep" == Sandeep Kumar <sandeepk@verismonetworks.com> writes:

 Sandeep> Hi
 Sandeep> How can i update to latest subversion version as "svn" is not working on
 Sandeep> my pc (though the internet connection is working fine). Is there any
 Sandeep> other way to update the sub verson.

Just download the 2009.02-rc4 release or the latest svn tarball from
the buildroot site.

-- 
Bye, Peter Korsgaard

[Buildroot] Web Server

[Dan Pattison]

Hello List:

I have got a little further with making Cherokee work with Buildroot. 
Using Peter's suggestion of   export ac_cv_func_malloc_0_nonnull=yes   
solved the error  undefined reference to `rpl_malloc' .

The cherokee.mk file now looks like this
#############################################################
# cherokee
#############################################################
CHEROKEE_VERSION = 0.98.1
CHEROKEE_SOURCE = cherokee-$(CHEROKEE_VERSION).tar.gz
CHEROKEE_SITE = http://www.cherokee-project.com/download/0.98/0.98.1
CHEROKEE_AUTORECONF = NO
CHEROKEE_INSTALL_STAGING = YES
CHEROKEE_INSTALL_TARGET = YES

CHEROKEE_CONF_OPT = export ac_cv_func_malloc_0_nonnull=yes

CHEROKEE_DEPENDENCIES = uclibc

$(eval $(call AUTOTARGETS,package,cherokee))


I am now getting a different error;   unrecognized command line option 
"-m32"
Can anyone suggest a work around for this error?

Best Regards,
Dan Pattison





Hello Peter:

Thanks for your reply. I think the stock BOA does not support Basic HTTP 
auth, see:  http://en.wikipedia.org/wiki/Boa_(web_server)
Please correct me if I am wrong. I cannot find where to set the password 
file in boa.conf. The docs for the boa conf file do not mention how to 
set the password.

I've googled around and there are some patches against boa 0.94 
mentioned that add basic auth functionality. Axis Communications (ARCH 
cris - Etrax) have added this to boa in their linux SDK.

I will check out the busybox httpd to see if it supports it, and will 
have a look at lighttpd.

I would still like to get Cherokee running if possible. Any chance 
someone more knowledgeable than me can download it and figure out to 
make it compile for buildroot? http://www.cherokee-project.com/

Thanks,
Dan Pattison

Peter Korsgaard wrote:
>>>>>> "Dan" == Dan Pattison <dan.pattison@ethertek.ca> writes:
>>>>>>             
>
>  Dan> Hello List:
>  Dan> We are using buildroot v2009.02 on a Fedora 10 linux distro. Our
>  Dan> architecture is for Atmel AT91SAM9G20-EK development board. We want a
>  Dan> more robust web server than the BOA or Busybox HTTPD. Our main
>  Dan> requirement is to have the web server make a web browser (IE6, IE7,
>  Dan> Firefox etc.) display a login/password box. It seems the two mentioned
>  Dan> web servers do not support this.
>
> Standard http auth? Both busybox httpd and boa supports that.
>
>  Dan> Apache seems overkill for our needs, so we wanted to try
>  Dan> Cherokee-0.98.1:  http://www.cherokee-project.com/
>
> We also have lighttpd in busybox, maybe take a look at that.
>
>  Dan> Using /buildroot/scripts/add_new_package.wizard we are able to make
>  Dan> our package show up in the make menuconfig configurator utility. When
>  Dan> we do a make from the top level directory we can see Cherokee gets
>  Dan> downloaded and starts to compile, but it errors out with these errors
>  Dan> below:
>
>  Dan> spawn-fcgi.o: In function `fcgi_spawn_connection':                                                                           
>
>  Dan> spawn-fcgi.c:(.text+0x340): undefined reference to `rpl_malloc'
>  Dan> collect2: ld returned 1 exit status                                                                                          
>
> Check config.log, you normally have to set a *_cv_func_malloc_* (don't
> remember the exact name offhand) variable to not get it to use this
> malloc wrapper.
>
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.233 / Virus Database: 270.10.17/1934 - Release Date: 01/29/09 17:57:00
>
>