* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
@ 2009-03-26 9:10 Jean-Christian de Rivaz
2009-04-22 12:48 ` Steffen Schulz
0 siblings, 1 reply; 12+ messages in thread
From: Jean-Christian de Rivaz @ 2009-03-26 9:10 UTC (permalink / raw)
To: buildroot
Hello,
I need the small patch below to successfully buils the dbus-glib. This was tested on a board that is almost like the AT91SAM9261EK, although I don't think it matter for this kind of problem. Without the patch the error was:
(cd /home/xxx/buildroot/build_arm/dbus-glib-0.80-host; [...]
[...]
checking pkg-config is at least version 0.9.0... yes
checking for DBUS... yes
checking for DBUS_GLIB... no
checking for DBUS_GLIB_THREADS... no
configure: error: GLib development libraries not found
make: *** [/home/xxx/buildroot/build_arm/dbus-glib-0.80-host/.configured] Error 1
Index: package/dbus-glib/dbus-glib.mk
===================================================================
--- package/dbus-glib/dbus-glib.mk (r?vision 25823)
+++ package/dbus-glib/dbus-glib.mk (copie de travail)
@@ -23,7 +23,7 @@
--disable-doxygen-docs \
--enable-asserts=yes
-DBUS_GLIB_DEPENDENCIES = uclibc host-pkgconfig dbus host-dbus host-dbus-glib libglib2
+DBUS_GLIB_DEPENDENCIES = uclibc host-pkgconfig dbus host-dbus host-libglib2 host-dbus-glib libglib2
$(eval $(call AUTOTARGETS,package,dbus-glib))
Best Regards,
--
Jean-Christian de Rivaz
^ permalink raw reply [flat|nested] 12+ messages in thread* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
2009-03-26 9:10 [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib Jean-Christian de Rivaz
@ 2009-04-22 12:48 ` Steffen Schulz
2009-04-22 12:52 ` Sven Neumann
0 siblings, 1 reply; 12+ messages in thread
From: Steffen Schulz @ 2009-04-22 12:48 UTC (permalink / raw)
To: buildroot
Hi,
I just had the same problem when trying to compile trunk for i686.
However, after applying the fix I got an error about missing '-lexpat'.
Adding expat to the dependencies fixed that.
On 090326 at 09:15, Jean-Christian de Rivaz wrote:
> I need the small patch below to successfully buils the dbus-glib. This was tested on a board that is almost like the AT91SAM9261EK, although I don't think it matter for this kind of problem. Without the patch the error was:
>
> (cd /home/xxx/buildroot/build_arm/dbus-glib-0.80-host; [...]
> [...]
> checking pkg-config is at least version 0.9.0... yes
> checking for DBUS... yes
> checking for DBUS_GLIB... no
> checking for DBUS_GLIB_THREADS... no
> configure: error: GLib development libraries not found
> make: *** [/home/xxx/buildroot/build_arm/dbus-glib-0.80-host/.configured] Error 1
>
> Index: package/dbus-glib/dbus-glib.mk
> ===================================================================
> --- package/dbus-glib/dbus-glib.mk (r?vision 25823)
> +++ package/dbus-glib/dbus-glib.mk (copie de travail)
> @@ -23,7 +23,7 @@
> --disable-doxygen-docs \
> --enable-asserts=yes
>
> -DBUS_GLIB_DEPENDENCIES = uclibc host-pkgconfig dbus host-dbus host-dbus-glib libglib2
> +DBUS_GLIB_DEPENDENCIES = uclibc host-pkgconfig dbus host-dbus host-libglib2 host-dbus-glib libglib2
>
> $(eval $(call AUTOTARGETS,package,dbus-glib))
>
>
> Best Regards,
--
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
2009-04-22 12:48 ` Steffen Schulz
@ 2009-04-22 12:52 ` Sven Neumann
2009-04-22 13:17 ` Steffen Schulz
2009-04-22 14:15 ` Jean-Christian de Rivaz
0 siblings, 2 replies; 12+ messages in thread
From: Sven Neumann @ 2009-04-22 12:52 UTC (permalink / raw)
To: buildroot
Hi,
On Wed, 2009-04-22 at 14:48 +0200, Steffen Schulz wrote:
> I just had the same problem when trying to compile trunk for i686.
> However, after applying the fix I got an error about missing '-lexpat'.
> Adding expat to the dependencies fixed that.
There is expat in the dependencies already:
ifeq ($(BR2_DBUS_EXPAT),y)
DBUS_CONF_OPT += --with-xml=expat
DBUS_DEPENDENCIES += expat
else
DBUS_CONF_OPT += --with-xml=libxml
DBUS_DEPENDENCIES += libxml2
endif
We are using libxml2, so I can't tell for sure if compiling dbus with
expat is working or not. But it looks as if the dependencies are
correct.
Sven
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
2009-04-22 12:52 ` Sven Neumann
@ 2009-04-22 13:17 ` Steffen Schulz
2009-04-22 13:58 ` Sven Neumann
2009-04-22 14:15 ` Jean-Christian de Rivaz
1 sibling, 1 reply; 12+ messages in thread
From: Steffen Schulz @ 2009-04-22 13:17 UTC (permalink / raw)
To: buildroot
On 090422 at 15:00, Sven Neumann wrote:
> On Wed, 2009-04-22 at 14:48 +0200, Steffen Schulz wrote:
>
> > I just had the same problem when trying to compile trunk for i686.
> > However, after applying the fix I got an error about missing '-lexpat'.
> > Adding expat to the dependencies fixed that.
>
> There is expat in the dependencies already:
>
> ifeq ($(BR2_DBUS_EXPAT),y)
> DBUS_CONF_OPT += --with-xml=expat
> DBUS_DEPENDENCIES += expat
> else
> DBUS_CONF_OPT += --with-xml=libxml
> DBUS_DEPENDENCIES += libxml2
> endif
Ah...but this is in dbus.mk, not dbus-glib.mk which gives the error.
Anyway, hal also fails to compile so I will skip the dbus stuff..
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
2009-04-22 13:17 ` Steffen Schulz
@ 2009-04-22 13:58 ` Sven Neumann
0 siblings, 0 replies; 12+ messages in thread
From: Sven Neumann @ 2009-04-22 13:58 UTC (permalink / raw)
To: buildroot
Hi,
On Wed, 2009-04-22 at 15:17 +0200, Steffen Schulz wrote:
> > There is expat in the dependencies already:
> >
> > ifeq ($(BR2_DBUS_EXPAT),y)
> > DBUS_CONF_OPT += --with-xml=expat
> > DBUS_DEPENDENCIES += expat
> > else
> > DBUS_CONF_OPT += --with-xml=libxml
> > DBUS_DEPENDENCIES += libxml2
> > endif
>
> Ah...but this is in dbus.mk, not dbus-glib.mk which gives the error.
Ah, but shouldn't dbus-glib depend on dbus already? Perhaps dbus-glib is
picking up wrong linker flags. I guess it might help to port dbus-glib
to Makefile.autotools.in.
Sven
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
2009-04-22 12:52 ` Sven Neumann
2009-04-22 13:17 ` Steffen Schulz
@ 2009-04-22 14:15 ` Jean-Christian de Rivaz
2009-04-22 14:27 ` Sven Neumann
2009-04-22 14:34 ` Peter Korsgaard
1 sibling, 2 replies; 12+ messages in thread
From: Jean-Christian de Rivaz @ 2009-04-22 14:15 UTC (permalink / raw)
To: buildroot
Sven Neumann a ?crit :
> Hi,
>
> On Wed, 2009-04-22 at 14:48 +0200, Steffen Schulz wrote:
>
>> I just had the same problem when trying to compile trunk for i686.
>> However, after applying the fix I got an error about missing '-lexpat'.
>> Adding expat to the dependencies fixed that.
>
> There is expat in the dependencies already:
>
> ifeq ($(BR2_DBUS_EXPAT),y)
> DBUS_CONF_OPT += --with-xml=expat
> DBUS_DEPENDENCIES += expat
> else
> DBUS_CONF_OPT += --with-xml=libxml
> DBUS_DEPENDENCIES += libxml2
> endif
>
> We are using libxml2, so I can't tell for sure if compiling dbus with
> expat is working or not. But it looks as if the dependencies are
> correct.
Interesting. On ARM I can only build dbus with expat.
BR2_PACKAGE_DBUS=y
BR2_DBUS_EXPAT=y
# BR2_DBUS_LIBXML2 is not set
BR2_PACKAGE_DBUS_GLIB=y
Jean-Christian de Rivaz
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
2009-04-22 14:15 ` Jean-Christian de Rivaz
@ 2009-04-22 14:27 ` Sven Neumann
2009-04-22 14:34 ` Peter Korsgaard
1 sibling, 0 replies; 12+ messages in thread
From: Sven Neumann @ 2009-04-22 14:27 UTC (permalink / raw)
To: buildroot
Hi,
On Wed, 2009-04-22 at 16:15 +0200, Jean-Christian de Rivaz wrote:
> Interesting. On ARM I can only build dbus with expat.
>
> BR2_PACKAGE_DBUS=y
> BR2_DBUS_EXPAT=y
> # BR2_DBUS_LIBXML2 is not set
> BR2_PACKAGE_DBUS_GLIB=y
This works for us:
BR2_iwmmxt=y
BR2_ARM_TYPE="ARM_IWMMXT"
# BR2_ARM_OABI is not set
BR2_ARM_EABI=y
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="iwmmxt"
BR2_GCC_TARGET_ARCH="iwmmxt"
BR2_GCC_TARGET_ABI="aapcs-linux"
BR2_PACKAGE_DBUS=y
# BR2_DBUS_EXPAT is not set
BR2_DBUS_LIBXML2=y
BR2_PACKAGE_DBUS_GLIB=y
Sven
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
2009-04-22 14:15 ` Jean-Christian de Rivaz
2009-04-22 14:27 ` Sven Neumann
@ 2009-04-22 14:34 ` Peter Korsgaard
2009-04-22 15:32 ` [Buildroot] How to incorporate linux kernel patch correctly Will Moore
2009-04-23 8:24 ` [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib Jean-Christian de Rivaz
1 sibling, 2 replies; 12+ messages in thread
From: Peter Korsgaard @ 2009-04-22 14:34 UTC (permalink / raw)
To: buildroot
>>>>> "Jean-Christian" == Jean-Christian de Rivaz <jc@eclis.ch> writes:
>> We are using libxml2, so I can't tell for sure if compiling dbus with
>> expat is working or not. But it looks as if the dependencies are
>> correct.
Jean-Christian> Interesting. On ARM I can only build dbus with expat.
Jean-Christian> BR2_PACKAGE_DBUS=y
Jean-Christian> BR2_DBUS_EXPAT=y
Jean-Christian> # BR2_DBUS_LIBXML2 is not set
Jean-Christian> BR2_PACKAGE_DBUS_GLIB=y
What happens when you try building it with libxml2? I fixed a build
issue with libxml2 in February.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] How to incorporate linux kernel patch correctly
2009-04-22 14:34 ` Peter Korsgaard
@ 2009-04-22 15:32 ` Will Moore
2009-04-23 8:24 ` [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib Jean-Christian de Rivaz
1 sibling, 0 replies; 12+ messages in thread
From: Will Moore @ 2009-04-22 15:32 UTC (permalink / raw)
To: buildroot
Is there a buildroot user mail list where I might get assistance but not
disturb the developers? I looked but could not find so, apologies ...
I am using buildroot 2009.02 release and have successfully produced a linux
kernel, rootfs and cross tool kit for a 486 SX PC104 PC104 CPU. I need to
apply a patch to the 2.6.24 kernel and have initially used a kernel .config
provided by the PC104 manufacturer which I did by manually applying the
patch in project_build_486/uclibc/linux-2.6.24 and copying the kernel
.config there too. I can see that there is support in the buildroot menu
Kernel->Patches for Additional patch to apply (from $(DL_DIR)) but when I
put the kernel patch file in /dl and entered the filename in the menu
configuration buildroot complained:
Make: *** No rule to make target 'patch-2.4.6-DMP', needed by
'../project_build_i486/uclibc/linux-2.6.24/.patched'. Stop.
Your assistance to better understand how to get buildroot to automatically
apply a kernel patch would be appreciated.
Regards
Will
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
2009-04-22 14:34 ` Peter Korsgaard
2009-04-22 15:32 ` [Buildroot] How to incorporate linux kernel patch correctly Will Moore
@ 2009-04-23 8:24 ` Jean-Christian de Rivaz
2009-04-23 8:40 ` Peter Korsgaard
1 sibling, 1 reply; 12+ messages in thread
From: Jean-Christian de Rivaz @ 2009-04-23 8:24 UTC (permalink / raw)
To: buildroot
Peter Korsgaard a ?crit :
>>>>>> "Jean-Christian" == Jean-Christian de Rivaz <jc@eclis.ch> writes:
>
> >> We are using libxml2, so I can't tell for sure if compiling dbus with
> >> expat is working or not. But it looks as if the dependencies are
> >> correct.
>
> Jean-Christian> Interesting. On ARM I can only build dbus with expat.
>
> Jean-Christian> BR2_PACKAGE_DBUS=y
> Jean-Christian> BR2_DBUS_EXPAT=y
> Jean-Christian> # BR2_DBUS_LIBXML2 is not set
> Jean-Christian> BR2_PACKAGE_DBUS_GLIB=y
>
> What happens when you try building it with libxml2? I fixed a build
> issue with libxml2 in February.
>
Well, it take me some time to do the test because my original buildroot
folder was not clean enough. I have checked out the revision 26186 from
the buildroot SVN and I have copied it into 4 folders in order to test
without and with the patch and using expat or libxml2. The short answer
is that for my configuration only the folder with the patch and using
expat do the build successfully.
Without the patch, using expat or libxml2, let the build fail with this
error into the make of dbus-1.2.12-host:
[...]
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for XML_ParserCreate_MM in -lexpat... yes
checking expat.h usability... yes
checking expat.h presence... yes
checking for expat.h... yes
checking pkg-config is at least version 0.9.0... yes
checking for DBUS... yes
checking for DBUS_GLIB... no
checking for DBUS_GLIB_THREADS... no
configure: error: GLib development libraries not found
make: *** [/home/jcdr/try/buildroot-svn-expat/build_arm/stamps/host_dbusglib_configured] Erreur 1
It worth noticed that even if libxml2 is used, the dbus-1.2.12-host
configure log the same messages about expat and no one about libxml2.
The two others folders have this patch applyed:
------------------------------------------------
Index: package/dbus-glib/dbus-glib.mk
===================================================================
--- package/dbus-glib/dbus-glib.mk (r?vision 26188)
+++ package/dbus-glib/dbus-glib.mk (copie de travail)
@@ -23,7 +23,7 @@
--disable-doxygen-docs \
--enable-asserts=yes
-DBUS_GLIB_DEPENDENCIES = uclibc host-pkgconfig dbus host-dbus host-dbus-glib libglib2
+DBUS_GLIB_DEPENDENCIES = uclibc host-pkgconfig dbus host-dbus host-libglib2 host-dbus-glib libglib2
$(eval $(call AUTOTARGETS,package,dbus-glib))
------------------------------------------------
Now using libxml2 let the build fail with this error into the make of
dbus-glib:
[...]
checking for ngettext in -lintl... yes
checking for dgettext in -lintl... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for XML_ParserCreate_MM in -lexpat... no
configure: error: expat library not found, check config.log for failed attempts
make: *** [/home/jcdr/try/buildroot-svn-dep-libxml2/build_arm/dbus-glib-0.80/.stamp_configured] Erreur 1
Jean-Christian de Rivaz
^ permalink raw reply [flat|nested] 12+ messages in thread* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
2009-04-23 8:24 ` [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib Jean-Christian de Rivaz
@ 2009-04-23 8:40 ` Peter Korsgaard
2009-04-23 8:57 ` Jean-Christian de Rivaz
0 siblings, 1 reply; 12+ messages in thread
From: Peter Korsgaard @ 2009-04-23 8:40 UTC (permalink / raw)
To: buildroot
>>>>> "Jean-Christian" == Jean-Christian de Rivaz <jc@eclis.ch> writes:
Hi,
Jean-Christian> Without the patch, using expat or libxml2, let the
Jean-Christian> build fail with this error into the make of
Jean-Christian> dbus-1.2.12-host:
I take it you mean dbus-glib-host from the below.
Jean-Christian> [...]
Jean-Christian> checking for gmsgfmt... /usr/bin/msgfmt
Jean-Christian> checking for xgettext... /usr/bin/xgettext
Jean-Christian> checking for XML_ParserCreate_MM in -lexpat... yes
Jean-Christian> checking expat.h usability... yes
Jean-Christian> checking expat.h presence... yes
Jean-Christian> checking for expat.h... yes
Jean-Christian> checking pkg-config is at least version 0.9.0... yes
Jean-Christian> checking for DBUS... yes
Jean-Christian> checking for DBUS_GLIB... no
Jean-Christian> checking for DBUS_GLIB_THREADS... no
Jean-Christian> configure: error: GLib development libraries not found
Jean-Christian> make: *** [/home/jcdr/try/buildroot-svn-expat/build_arm/stamps/host_dbusglib_configured] Erreur 1
Ahh, I thought you had a problem building dbus for the target, not
dbus-glib for the host. I see the missing dependency on host-glib and
will fix shortly.
Jean-Christian> It worth noticed that even if libxml2 is used, the
Jean-Christian> dbus-1.2.12-host configure log the same messages
Jean-Christian> about expat and no one about libxml2.
Yes, we always build the host dbus version with expat support for
simplicity.
Jean-Christian> The two others folders have this patch applyed:
Jean-Christian> ------------------------------------------------
Jean-Christian> Index: package/dbus-glib/dbus-glib.mk
Jean-Christian> ===================================================================
Jean-Christian> --- package/dbus-glib/dbus-glib.mk (r?vision 26188)
Jean-Christian> +++ package/dbus-glib/dbus-glib.mk (copie de travail)
Jean-Christian> @@ -23,7 +23,7 @@
Jean-Christian> --disable-doxygen-docs \
Jean-Christian> --enable-asserts=yes
Jean-Christian> -DBUS_GLIB_DEPENDENCIES = uclibc host-pkgconfig dbus host-dbus host-dbus-glib libglib2
Jean-Christian> +DBUS_GLIB_DEPENDENCIES = uclibc host-pkgconfig dbus host-dbus host-libglib2 host-dbus-glib libglib2
That's wrong, it's the host-dbus-glib which needs the host-glib, not
the target dbus-glib (but it'll work as well). I'll fix it in svn.
Jean-Christian> Now using libxml2 let the build fail with this error
Jean-Christian> into the make of dbus-glib:
Jean-Christian> [...]
Jean-Christian> checking for ngettext in -lintl... yes
Jean-Christian> checking for dgettext in -lintl... yes
Jean-Christian> checking for bind_textdomain_codeset... yes
Jean-Christian> checking for msgfmt... /usr/bin/msgfmt
Jean-Christian> checking for dcgettext... yes
Jean-Christian> checking if msgfmt accepts -c... yes
Jean-Christian> checking for gmsgfmt... /usr/bin/msgfmt
Jean-Christian> checking for xgettext... /usr/bin/xgettext
Jean-Christian> checking for XML_ParserCreate_MM in -lexpat... no
Jean-Christian> configure: error: expat library not found, check config.log for failed attempts
Jean-Christian> make: *** [/home/jcdr/try/buildroot-svn-dep-libxml2/build_arm/dbus-glib-0.80/.stamp_configured] Erreur 1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib
2009-04-23 8:40 ` Peter Korsgaard
@ 2009-04-23 8:57 ` Jean-Christian de Rivaz
0 siblings, 0 replies; 12+ messages in thread
From: Jean-Christian de Rivaz @ 2009-04-23 8:57 UTC (permalink / raw)
To: buildroot
Peter Korsgaard a ?crit :
>>>>>> "Jean-Christian" == Jean-Christian de Rivaz <jc@eclis.ch> writes:
Hi,
> Jean-Christian> Without the patch, using expat or libxml2, let the
> Jean-Christian> build fail with this error into the make of
> Jean-Christian> dbus-1.2.12-host:
>
> I take it you mean dbus-glib-host from the below.
Yes. I was confused by a early make message, sorry.
> Jean-Christian> configure: error: GLib development libraries not found
> Jean-Christian> make: *** [/home/jcdr/try/buildroot-svn-expat/build_arm/stamps/host_dbusglib_configured] Erreur 1
>
> Ahh, I thought you had a problem building dbus for the target, not
> dbus-glib for the host. I see the missing dependency on host-glib and
> will fix shortly.
Thanks.
> Jean-Christian> It worth noticed that even if libxml2 is used, the
> Jean-Christian> dbus-1.2.12-host configure log the same messages
> Jean-Christian> about expat and no one about libxml2.
>
> Yes, we always build the host dbus version with expat support for
> simplicity.
Ok.
> Jean-Christian> The two others folders have this patch applyed:
> Jean-Christian> ------------------------------------------------
> Jean-Christian> Index: package/dbus-glib/dbus-glib.mk
> Jean-Christian> ===================================================================
> Jean-Christian> --- package/dbus-glib/dbus-glib.mk (r?vision 26188)
> Jean-Christian> +++ package/dbus-glib/dbus-glib.mk (copie de travail)
> Jean-Christian> @@ -23,7 +23,7 @@
> Jean-Christian> --disable-doxygen-docs \
> Jean-Christian> --enable-asserts=yes
>
> Jean-Christian> -DBUS_GLIB_DEPENDENCIES = uclibc host-pkgconfig dbus host-dbus host-dbus-glib libglib2
> Jean-Christian> +DBUS_GLIB_DEPENDENCIES = uclibc host-pkgconfig dbus host-dbus host-libglib2 host-dbus-glib libglib2
>
> That's wrong, it's the host-dbus-glib which needs the host-glib, not
> the target dbus-glib (but it'll work as well). I'll fix it in svn.
I agree with you, but I did not know how to make a better fix.
> Jean-Christian> checking for XML_ParserCreate_MM in -lexpat... no
> Jean-Christian> configure: error: expat library not found, check config.log for failed attempts
> Jean-Christian> make: *** [/home/jcdr/try/buildroot-svn-dep-libxml2/build_arm/dbus-glib-0.80/.stamp_configured] Erreur 1
>
> From looking at configure.ac it seems like you cannot build dbus-glib
> with libxml support, but that it REQUIRES expat (upstream is not
> really interested in libxml support anymore).
>
> I'll fix the Kconfig dependencies in svn.
Good idea. Thanks.
--
Jean-Christian de Rivaz
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2009-04-23 8:57 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-26 9:10 [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib Jean-Christian de Rivaz
2009-04-22 12:48 ` Steffen Schulz
2009-04-22 12:52 ` Sven Neumann
2009-04-22 13:17 ` Steffen Schulz
2009-04-22 13:58 ` Sven Neumann
2009-04-22 14:15 ` Jean-Christian de Rivaz
2009-04-22 14:27 ` Sven Neumann
2009-04-22 14:34 ` Peter Korsgaard
2009-04-22 15:32 ` [Buildroot] How to incorporate linux kernel patch correctly Will Moore
2009-04-23 8:24 ` [Buildroot] [PATCH] Add host-libglib2 dependencie to dbus-glib Jean-Christian de Rivaz
2009-04-23 8:40 ` Peter Korsgaard
2009-04-23 8:57 ` Jean-Christian de Rivaz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox