From: Mischa Jonker <Mischa.Jonker@synopsys.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v4 06/12] arc: add gcc for ARC
Date: Thu, 2 May 2013 21:51:27 +0200 [thread overview]
Message-ID: <1367524293-32081-7-git-send-email-mjonker@synopsys.com> (raw)
In-Reply-To: <1367524293-32081-1-git-send-email-mjonker@synopsys.com>
ARC needs a specific GCC for now, while we wait for ARC support to get
upstreamed.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
---
.../gcc/4.4.7-arc/fix_branch_out_of_range.patch | 30 ++++++++++++++++++++
toolchain/gcc/Config.in | 22 +++++++++-----
toolchain/gcc/gcc-uclibc-4.x.mk | 2 +
3 files changed, 46 insertions(+), 8 deletions(-)
create mode 100644 toolchain/gcc/4.4.7-arc/fix_branch_out_of_range.patch
diff --git a/toolchain/gcc/4.4.7-arc/fix_branch_out_of_range.patch b/toolchain/gcc/4.4.7-arc/fix_branch_out_of_range.patch
new file mode 100644
index 0000000..e39b1cc
--- /dev/null
+++ b/toolchain/gcc/4.4.7-arc/fix_branch_out_of_range.patch
@@ -0,0 +1,30 @@
+arc: Fix operand-out-of-range errors
+
+brcc_s instructions can generate operand-out-of-range errors. While a
+better solution is being discussed by the compiler team, this workaround
+ensures that the chances of running into this issue are low.
+
+Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
+
+diff --git a/gcc/config/arc/arc.c b/gcc/config/arc/arc.c
+index ff602c0..b3ca4c4 100644
+--- a/gcc/config/arc/arc.c
++++ b/gcc/config/arc/arc.c
+@@ -6565,7 +6565,7 @@ estimate required size increase).
+ rtx *ccp = &XEXP (XVECEXP (pat, 0, 1), 0);
+
+ offset = branch_dest (insn) - INSN_ADDRESSES (INSN_UID (insn));
+- if ((offset >= -140 && offset < 140)
++ if ((offset >= -120 && offset < 120)
+ && rtx_equal_p (XEXP (op, 1), const0_rtx)
+ && compact_register_operand (XEXP (op, 0), VOIDmode)
+ && equality_comparison_operator (op, VOIDmode))
+@@ -6687,7 +6687,7 @@ estimate required size increase).
+
+ if (op0 != cmp0)
+ cc_clob_rtx = gen_rtx_REG (CC_ZNmode, CC_REG);
+- else if ((offset >= -140 && offset < 140)
++ else if ((offset >= -120 && offset < 120)
+ && rtx_equal_p (op1, const0_rtx)
+ && compact_register_operand (op0, VOIDmode)
+ && (GET_CODE (op) == EQ
diff --git a/toolchain/gcc/Config.in b/toolchain/gcc/Config.in
index aae422c..f297e73 100644
--- a/toolchain/gcc/Config.in
+++ b/toolchain/gcc/Config.in
@@ -9,44 +9,49 @@ choice
prompt "GCC compiler Version"
default BR2_GCC_VERSION_4_4_X if BR2_sparc_sparchfleon || BR2_sparc_sparchfleonv8 || BR2_sparc_sparcsfleon || BR2_sparc_sparcsfleonv8
default BR2_GCC_VERSION_4_2_2_AVR32_2_1_5 if BR2_avr32
+ default BR2_GCC_VERSION_4_4_7_ARC if BR2_arc
default BR2_GCC_VERSION_4_7_X
help
Select the version of gcc you wish to use.
+ config BR2_GCC_VERSION_4_4_7_ARC
+ depends on BR2_arc
+ bool "gcc 4.4.7-arc"
+
config BR2_GCC_VERSION_4_2_2_AVR32_2_1_5
depends on BR2_avr32
bool "gcc 4.2.2-avr32-2.1.5"
config BR2_GCC_VERSION_4_3_X
- depends on !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_cortex_a5 && !BR2_cortex_a8 && !BR2_cortex_a9 && !BR2_cortex_a15 && !BR2_x86_atom && !BR2_powerpc_e300c2 && !BR2_powerpc_e300c3 && !BR2_powerpc_e500mc && !BR2_powerpc_464 && !BR2_powerpc_464fp && !BR2_powerpc_476 && !BR2_powerpc_476fp && !BR2_fa526 && !BR2_pj4
+ depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_cortex_a5 && !BR2_cortex_a8 && !BR2_cortex_a9 && !BR2_cortex_a15 && !BR2_x86_atom && !BR2_powerpc_e300c2 && !BR2_powerpc_e300c3 && !BR2_powerpc_e500mc && !BR2_powerpc_464 && !BR2_powerpc_464fp && !BR2_powerpc_476 && !BR2_powerpc_476fp && !BR2_fa526 && !BR2_pj4
bool "gcc 4.3.x"
config BR2_GCC_VERSION_4_4_X
- depends on !BR2_avr32 && !BR2_cortex_a5 && !BR2_cortex_a15 && !BR2_x86_atom && !BR2_powerpc_476 && !BR2_powerpc_476fp && !BR2_fa526 && !BR2_pj4
+ depends on !BR2_arc && !BR2_avr32 && !BR2_cortex_a5 && !BR2_cortex_a15 && !BR2_x86_atom && !BR2_powerpc_476 && !BR2_powerpc_476fp && !BR2_fa526 && !BR2_pj4
bool "gcc 4.4.x"
config BR2_GCC_VERSION_4_5_X
- depends on !BR2_avr32 && !BR2_cortex_a15 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_fa526 && !BR2_pj4
+ depends on !BR2_arc && !BR2_avr32 && !BR2_cortex_a15 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_fa526 && !BR2_pj4
select BR2_GCC_NEEDS_MPC
bool "gcc 4.5.x"
config BR2_GCC_VERSION_4_6_X
- depends on !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4
+ depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4
select BR2_GCC_NEEDS_MPC
bool "gcc 4.6.x"
config BR2_GCC_VERSION_4_7_X
- depends on !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4
+ depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4
select BR2_GCC_NEEDS_MPC
bool "gcc 4.7.x"
config BR2_GCC_VERSION_4_8_X
- depends on !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8
+ depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8
select BR2_GCC_NEEDS_MPC
bool "gcc 4.8.x"
config BR2_GCC_VERSION_SNAP
- depends on !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8
+ depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8
select BR2_GCC_NEEDS_MPC
bool "gcc snapshot"
endchoice
@@ -74,6 +79,7 @@ config BR2_GCC_VERSION
default "4.2.2-avr32-2.1.5" if BR2_GCC_VERSION_4_2_2_AVR32_2_1_5
default "4.3.6" if BR2_GCC_VERSION_4_3_X
default "4.4.7" if BR2_GCC_VERSION_4_4_X
+ default "4.4.7-arc" if BR2_GCC_VERSION_4_4_7_ARC
default "4.5.4" if BR2_GCC_VERSION_4_5_X
default "4.6.4" if BR2_GCC_VERSION_4_6_X
default "4.7.3" if BR2_GCC_VERSION_4_7_X
@@ -119,6 +125,6 @@ config BR2_GCC_ENABLE_TLS
config BR2_GCC_ENABLE_OPENMP
bool "Enable compiler OpenMP support"
- depends on !BR2_PTHREADS_NONE && !BR2_avr32
+ depends on !BR2_PTHREADS_NONE && !BR2_avr32 && !BR2_arc
help
Enable OpenMP support for the compiler
diff --git a/toolchain/gcc/gcc-uclibc-4.x.mk b/toolchain/gcc/gcc-uclibc-4.x.mk
index 0a96211..2993697 100644
--- a/toolchain/gcc/gcc-uclibc-4.x.mk
+++ b/toolchain/gcc/gcc-uclibc-4.x.mk
@@ -29,6 +29,8 @@ ifneq ($(GCC_SNAP_DATE),)
GCC_SITE:=ftp://gcc.gnu.org/pub/gcc/snapshots/$(GCC_SNAP_DATE)/
else ifeq ($(findstring avr32,$(GCC_VERSION)),avr32)
GCC_SITE:=ftp://www.at91.com/pub/buildroot/
+else ifeq ($(findstring arc,$(GCC_VERSION)),arc)
+ GCC_SITE:=$(BR2_ARC_SITE)
else
GCC_SITE:=$(BR2_GNU_MIRROR:/=)/gcc/gcc-$(GCC_VERSION)
endif
--
1.7.0.4
next prev parent reply other threads:[~2013-05-02 19:51 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-02 19:51 [Buildroot] [PATCH v4 00/12] ARC port Mischa Jonker
2013-05-02 19:51 ` [Buildroot] [PATCH v4 01/12] toolchain/gcc: Add host-{flex, bison} dependencies for GCC 4.2, 4.3, 4.4 Mischa Jonker
2013-05-04 20:58 ` Peter Korsgaard
2013-05-07 7:54 ` Thomas Petazzoni
2013-05-02 19:51 ` [Buildroot] [PATCH v4 02/12] arc: Add ARC and ARC BE architecture Mischa Jonker
2013-05-04 21:02 ` Peter Korsgaard
2013-05-02 19:51 ` [Buildroot] [PATCH v4 03/12] arc: Add option for ARC-specific download site Mischa Jonker
2013-05-04 21:04 ` Peter Korsgaard
2013-05-02 19:51 ` [Buildroot] [PATCH v4 04/12] arc: Add support for ARC-specific binutils Mischa Jonker
2013-05-04 21:08 ` Peter Korsgaard
2013-05-02 19:51 ` [Buildroot] [PATCH v4 05/12] arc: disable Crosstool-NG for ARC Mischa Jonker
2013-05-04 21:09 ` Peter Korsgaard
2013-05-02 19:51 ` Mischa Jonker [this message]
2013-05-04 21:11 ` [Buildroot] [PATCH v4 06/12] arc: add gcc " Peter Korsgaard
2013-05-02 19:51 ` [Buildroot] [PATCH v4 07/12] arc: Add support for ARC-specific uClibc Mischa Jonker
2013-05-04 21:21 ` Peter Korsgaard
2013-05-02 19:51 ` [Buildroot] [PATCH v4 08/12] arc: Make sure that libgcc doesn't get included when it doesn't exist yet Mischa Jonker
2013-05-04 21:22 ` Peter Korsgaard
2013-05-02 19:51 ` [Buildroot] [PATCH v4 09/12] toolchain/gcc: Only enable --with-float when it makes sense Mischa Jonker
2013-05-04 21:22 ` Peter Korsgaard
2013-05-02 19:51 ` [Buildroot] [PATCH v4 10/12] toolchain/toolchain-buildroot: Disable NPTL for ARC Mischa Jonker
2013-05-04 21:23 ` Peter Korsgaard
2013-05-02 19:51 ` [Buildroot] [PATCH v4 11/12] arc: Add arc, arcbe to gnuconfig Mischa Jonker
2013-05-04 21:23 ` Peter Korsgaard
2013-05-02 19:51 ` [Buildroot] [PATCH v4 12/12] kernel-headers: Add support for ARC kernel headers Mischa Jonker
2013-05-04 21:24 ` Peter Korsgaard
2013-05-03 18:41 ` [Buildroot] [PATCH v4 00/12] ARC port Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1367524293-32081-7-git-send-email-mjonker@synopsys.com \
--to=mischa.jonker@synopsys.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox