* [Buildroot] [PATCH 1/1] package/openocd: select libusb when selecting libusb-compat
@ 2016-01-01 16:01 Romain Naour
2016-01-01 16:07 ` Yann E. MORIN
2016-01-01 18:56 ` Peter Korsgaard
0 siblings, 2 replies; 3+ messages in thread
From: Romain Naour @ 2016-01-01 16:01 UTC (permalink / raw)
To: buildroot
libusb-compat depends on libusb package, so we need to select
libusb package at the same time as libusb-compat to avoid an
unmet dependency.
Since 28f67899e54f15c6e48484ea2976c3e431756bcb, the build
stop if a package build is trigged at Makefile level without
being selected at Config.in level.
This is the case here with BR2_PACKAGE_OPENOCD_USBPROG which
select BR2_PACKAGE_LIBUSB_COMPAT without selecting
BR2_PACKAGE_LIBUSB.
Fixes:
http://autobuild.buildroot.net/results/b4a/b4a8c54eed6bf75ab8ade0653953d19792155727/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
---
package/openocd/Config.in | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/package/openocd/Config.in b/package/openocd/Config.in
index d84aac1..a35bd27 100644
--- a/package/openocd/Config.in
+++ b/package/openocd/Config.in
@@ -84,6 +84,7 @@ config BR2_PACKAGE_OPENOCD_AICE
config BR2_PACKAGE_OPENOCD_VSLLINK
bool "Versaloon-Link JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
help
@@ -92,6 +93,7 @@ config BR2_PACKAGE_OPENOCD_VSLLINK
config BR2_PACKAGE_OPENOCD_USBPROG
bool "USBProg JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
help
@@ -100,6 +102,7 @@ config BR2_PACKAGE_OPENOCD_USBPROG
config BR2_PACKAGE_OPENOCD_RLINK
bool "Raisonance RLink JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
help
@@ -108,6 +111,7 @@ config BR2_PACKAGE_OPENOCD_RLINK
config BR2_PACKAGE_OPENOCD_ARMEW
bool "Olimex ARM-JTAG-EW Programmer"
+ select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
help
@@ -186,6 +190,7 @@ config BR2_PACKAGE_OPENOCD_PRESTO
config BR2_PACKAGE_OPENOCD_OPENJTAG
bool "OpenJTAG Programmer"
select BR2_PACKAGE_LIBFTDI1
+ select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT # needs usb.h
depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
depends on BR2_ARCH_HAS_ATOMICS
--
2.4.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH 1/1] package/openocd: select libusb when selecting libusb-compat
2016-01-01 16:01 [Buildroot] [PATCH 1/1] package/openocd: select libusb when selecting libusb-compat Romain Naour
@ 2016-01-01 16:07 ` Yann E. MORIN
2016-01-01 18:56 ` Peter Korsgaard
1 sibling, 0 replies; 3+ messages in thread
From: Yann E. MORIN @ 2016-01-01 16:07 UTC (permalink / raw)
To: buildroot
Romain, All,
On 2016-01-01 17:01 +0100, Romain Naour spake thusly:
> libusb-compat depends on libusb package, so we need to select
> libusb package at the same time as libusb-compat to avoid an
> unmet dependency.
>
> Since 28f67899e54f15c6e48484ea2976c3e431756bcb, the build
> stop if a package build is trigged at Makefile level without
> being selected at Config.in level.
>
> This is the case here with BR2_PACKAGE_OPENOCD_USBPROG which
> select BR2_PACKAGE_LIBUSB_COMPAT without selecting
> BR2_PACKAGE_LIBUSB.
>
> Fixes:
> http://autobuild.buildroot.net/results/b4a/b4a8c54eed6bf75ab8ade0653953d19792155727/
>
> Signed-off-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
> ---
> package/openocd/Config.in | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/package/openocd/Config.in b/package/openocd/Config.in
> index d84aac1..a35bd27 100644
> --- a/package/openocd/Config.in
> +++ b/package/openocd/Config.in
> @@ -84,6 +84,7 @@ config BR2_PACKAGE_OPENOCD_AICE
>
> config BR2_PACKAGE_OPENOCD_VSLLINK
> bool "Versaloon-Link JTAG Programmer"
> + select BR2_PACKAGE_LIBUSB
> select BR2_PACKAGE_LIBUSB_COMPAT
> depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
> help
> @@ -92,6 +93,7 @@ config BR2_PACKAGE_OPENOCD_VSLLINK
>
> config BR2_PACKAGE_OPENOCD_USBPROG
> bool "USBProg JTAG Programmer"
> + select BR2_PACKAGE_LIBUSB
> select BR2_PACKAGE_LIBUSB_COMPAT
> depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
> help
> @@ -100,6 +102,7 @@ config BR2_PACKAGE_OPENOCD_USBPROG
>
> config BR2_PACKAGE_OPENOCD_RLINK
> bool "Raisonance RLink JTAG Programmer"
> + select BR2_PACKAGE_LIBUSB
> select BR2_PACKAGE_LIBUSB_COMPAT
> depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
> help
> @@ -108,6 +111,7 @@ config BR2_PACKAGE_OPENOCD_RLINK
>
> config BR2_PACKAGE_OPENOCD_ARMEW
> bool "Olimex ARM-JTAG-EW Programmer"
> + select BR2_PACKAGE_LIBUSB
> select BR2_PACKAGE_LIBUSB_COMPAT
> depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
> help
> @@ -186,6 +190,7 @@ config BR2_PACKAGE_OPENOCD_PRESTO
> config BR2_PACKAGE_OPENOCD_OPENJTAG
> bool "OpenJTAG Programmer"
> select BR2_PACKAGE_LIBFTDI1
> + select BR2_PACKAGE_LIBUSB
> select BR2_PACKAGE_LIBUSB_COMPAT # needs usb.h
> depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
> depends on BR2_ARCH_HAS_ATOMICS
> --
> 2.4.3
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH 1/1] package/openocd: select libusb when selecting libusb-compat
2016-01-01 16:01 [Buildroot] [PATCH 1/1] package/openocd: select libusb when selecting libusb-compat Romain Naour
2016-01-01 16:07 ` Yann E. MORIN
@ 2016-01-01 18:56 ` Peter Korsgaard
1 sibling, 0 replies; 3+ messages in thread
From: Peter Korsgaard @ 2016-01-01 18:56 UTC (permalink / raw)
To: buildroot
>>>>> "Romain" == Romain Naour <romain.naour@gmail.com> writes:
> libusb-compat depends on libusb package, so we need to select
> libusb package at the same time as libusb-compat to avoid an
> unmet dependency.
> Since 28f67899e54f15c6e48484ea2976c3e431756bcb, the build
> stop if a package build is trigged at Makefile level without
> being selected at Config.in level.
> This is the case here with BR2_PACKAGE_OPENOCD_USBPROG which
> select BR2_PACKAGE_LIBUSB_COMPAT without selecting
> BR2_PACKAGE_LIBUSB.
> Fixes:
> http://autobuild.buildroot.net/results/b4a/b4a8c54eed6bf75ab8ade0653953d19792155727/
> Signed-off-by: Romain Naour <romain.naour@gmail.com>
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-01-01 18:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-01 16:01 [Buildroot] [PATCH 1/1] package/openocd: select libusb when selecting libusb-compat Romain Naour
2016-01-01 16:07 ` Yann E. MORIN
2016-01-01 18:56 ` Peter Korsgaard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox