From: Gary Bisson <gary.bisson@boundarydevices.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.2
Date: Sat, 30 Jan 2016 12:45:48 +0100 [thread overview]
Message-ID: <1454154357-31625-2-git-send-email-gary.bisson@boundarydevices.com> (raw)
In-Reply-To: <1454154357-31625-1-git-send-email-gary.bisson@boundarydevices.com>
Use a different versioning schema based on package versioning
instead of BSP version. This way, if a new BSP version does
not bump this package, we can keep this package unchanged as well.
VPU firmware upgraded to v3.1.1_r46067
- Low Latency fixes for H.264 encoder
- Wrong frame number fix for H.264 decoder
- Decode failure fix for H.264 decoder with multi-SPS/PPS headers
The package adds the EPDC waveforms and the needed changes to properly
install those were done in the firmware-imx.inc file.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/d869826
https://github.com/Freescale/meta-fsl-arm/commit/075a5b1
This package has been implicitely tested through gstreamer as the
plugins rely on them for vpu decoding for instance:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
package/freescale-imx/firmware-imx/firmware-imx.hash | 2 +-
package/freescale-imx/firmware-imx/firmware-imx.mk | 9 ++++++---
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/package/freescale-imx/firmware-imx/firmware-imx.hash b/package/freescale-imx/firmware-imx/firmware-imx.hash
index 0b89c4b..06d5a54 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.hash
+++ b/package/freescale-imx/firmware-imx/firmware-imx.hash
@@ -1,2 +1,2 @@
# locally computed
-sha256 1f09acd4d605efc78a0672068a658cb16274811d2f444cf3ae7aaa075266746f firmware-imx-3.14.28-1.0.0.bin
+sha256 8cc2df128c0e2d2f5224d73389fbe6e4d6fa9ede76f8c0a9adaf7ec0986d0f1f firmware-imx-5.2.bin
diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
index 9cab5c2..51c428f 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.mk
+++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
@@ -4,7 +4,7 @@
#
################################################################################
-FIRMWARE_IMX_VERSION = $(FREESCALE_IMX_VERSION)
+FIRMWARE_IMX_VERSION = 5.2
FIRMWARE_IMX_SITE = $(FREESCALE_IMX_SITE)
FIRMWARE_IMX_SOURCE = firmware-imx-$(FIRMWARE_IMX_VERSION).bin
@@ -13,17 +13,20 @@ FIRMWARE_IMX_LICENSE = Freescale Semiconductor Software License Agreement, \
FIRMWARE_IMX_LICENSE_FILES = EULA COPYING
FIRMWARE_IMX_REDISTRIBUTE = NO
-FIRMWARE_IMX_BLOBS = ath6k sdma vpu
+FIRMWARE_IMX_BLOBS = sdma vpu
define FIRMWARE_IMX_EXTRACT_CMDS
$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(FIRMWARE_IMX_SOURCE))
endef
define FIRMWARE_IMX_INSTALL_TARGET_CMDS
- mkdir -p $(TARGET_DIR)/lib/firmware
+ mkdir -p $(TARGET_DIR)/lib/firmware/imx
for blobdir in $(FIRMWARE_IMX_BLOBS); do \
cp -r $(@D)/firmware/$${blobdir} $(TARGET_DIR)/lib/firmware; \
done
+ cp -r $(@D)/firmware/epdc $(TARGET_DIR)/lib/firmware/imx; \
+ mv $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw.nonrestricted \
+ $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw;
endef
$(eval $(generic-package))
--
2.6.4
next prev parent reply other threads:[~2016-01-30 11:45 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-30 11:45 [Buildroot] [PATCH 00/10] Update most Freescale packages Gary Bisson
2016-01-30 11:45 ` Gary Bisson [this message]
2016-02-01 20:39 ` [Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.2 Thomas Petazzoni
2016-02-01 20:56 ` Gary Bisson
2016-01-30 11:45 ` [Buildroot] [PATCH 02/10] imx-kobs: bump to version 5.1 Gary Bisson
2016-02-01 20:39 ` Thomas Petazzoni
2016-01-30 11:45 ` [Buildroot] [PATCH 03/10] imx-lib: " Gary Bisson
2016-02-01 20:39 ` Thomas Petazzoni
2016-01-30 11:45 ` [Buildroot] [PATCH 04/10] freescale-imx: remove FREESCALE_IMX_VERSION Gary Bisson
2016-02-01 20:39 ` Thomas Petazzoni
2016-01-30 11:45 ` [Buildroot] [PATCH 05/10] libfslcodec: bump to version 4.0.7 Gary Bisson
2016-02-01 20:39 ` Thomas Petazzoni
2016-01-30 11:45 ` [Buildroot] [PATCH 06/10] libfslparser: " Gary Bisson
2016-02-01 20:39 ` Thomas Petazzoni
2016-01-30 11:45 ` [Buildroot] [PATCH 07/10] libfslvpuwrap: bump to version 1.0.61 Gary Bisson
2016-02-01 20:39 ` Thomas Petazzoni
2016-01-30 11:45 ` [Buildroot] [PATCH 08/10] libimxvpuapi: add new package Gary Bisson
2016-02-01 20:42 ` Thomas Petazzoni
2016-02-01 21:07 ` Gary Bisson
2016-02-01 21:17 ` Thomas Petazzoni
2016-01-30 11:45 ` [Buildroot] [PATCH 09/10] gst1-plugins-bad: add install to staging directory Gary Bisson
2016-02-01 20:42 ` Thomas Petazzoni
2016-01-30 11:45 ` [Buildroot] [PATCH 10/10] gst1-imx: bump to version 0.12.0 Gary Bisson
2016-02-01 20:44 ` Thomas Petazzoni
2016-02-01 21:20 ` Gary Bisson
2016-02-01 22:27 ` Thomas Petazzoni
2016-02-01 22:49 ` Gary Bisson
2016-02-02 8:56 ` Arnout Vandecappelle
2016-02-02 9:07 ` Gary Bisson
2016-02-02 8:51 ` Arnout Vandecappelle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454154357-31625-2-git-send-email-gary.bisson@boundarydevices.com \
--to=gary.bisson@boundarydevices.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox