[Buildroot] [PATCH 1/4] wandboard: Use ext4 rootfs type

[Buildroot] [PATCH 1/4] wandboard: Use ext4 rootfs type

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@nxp.com>

Use ext4 rootfs type instead of ext2, as it is more reliable.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 board/wandboard/genimage.cfg | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/wandboard/genimage.cfg b/board/wandboard/genimage.cfg
index f5df1ff..745cec3 100644
--- a/board/wandboard/genimage.cfg
+++ b/board/wandboard/genimage.cfg
@@ -2,7 +2,7 @@
 #
 # The SD card must have at least 1 MB free at the beginning.
 # U-Boot and its environment are dumped as is.
-# A single root filesystem partition is required (Ext2 in this case).
+# A single root filesystem partition is required (Ext4 in this case).
 #
 # For details about the layout, see:
 # http://wiki.wandboard.org/index.php/Boot-process
@@ -32,7 +32,7 @@ image sdcard.img {
 
   partition rootfs {
     partition-type = 0x83
-    image = "rootfs.ext2"
+    image = "rootfs.ext4"
     size = 512M
   }
 }
-- 
2.7.4

[Buildroot] [PATCH 2/4] wandboard: Use kernel version 4.7.3

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@nxp.com>

Wandboard is well supported in the mainline kernel, so let's switch
from the 3.14 vendor kernel to 4.7.3 mainline kernel version.

As mainline use more dts files to support both B1 and C1 versions of the
board, adjust the dts entries accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 configs/wandboard_defconfig | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig
index cd06f40..33b7f0d 100644
--- a/configs/wandboard_defconfig
+++ b/configs/wandboard_defconfig
@@ -1,7 +1,7 @@
 BR2_arm=y
 BR2_cortex_a9=y
-# Linux headers same as kernel, a 3.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/wandboard/post-image.sh"
@@ -21,9 +21,9 @@ BR2_TARGET_UBOOT_ENVIMAGE_SOURCE="board/wandboard/uboot-env.txt"
 BR2_TARGET_UBOOT_ENVIMAGE_SIZE="0x2000"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/wandboard-org/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="e2213f9a98dd7413ee5a9ca40cf60e8cb8292f4a"
-BR2_LINUX_KERNEL_DEFCONFIG="wandboard"
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7.3"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-wandboard imx6dl-wandboard"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-wandboard imx6dl-wandboard imx6q-wandboard-revb1 imx6dl-wandboard-revb1"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-- 
2.7.4

[Buildroot] [PATCH 2/4] wandboard: Use kernel version 4.7.3

[Thomas Petazzoni]

Hello,

On Sun, 11 Sep 2016 16:42:04 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> Wandboard is well supported in the mainline kernel, so let's switch
> from the 3.14 vendor kernel to 4.7.3 mainline kernel version.
> 
> As mainline use more dts files to support both B1 and C1 versions of the
> board, adjust the dts entries accordingly.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  configs/wandboard_defconfig | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)

Applied to master, thanks.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH 3/4] wandboard: Use U-Boot 2016.07

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@nxp.com>

Upgrade U-Boot version to 2016.07 and make proper use of U-Boot
distro configuration features.

Provide a boot.scr binary script that is one of the standard ways to
pass a U-Boot script with distro features enabled.

With this method the uboot-env.txt file is no longer needed, so it is
removed.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 board/wandboard/boot.scr.txt  |  7 +++++++
 board/wandboard/genimage.cfg  |  7 -------
 board/wandboard/post-build.sh |  8 ++++++++
 board/wandboard/uboot-env.txt | 28 ----------------------------
 configs/wandboard_defconfig   | 10 +++-------
 5 files changed, 18 insertions(+), 42 deletions(-)
 create mode 100644 board/wandboard/boot.scr.txt
 create mode 100755 board/wandboard/post-build.sh
 delete mode 100644 board/wandboard/uboot-env.txt

diff --git a/board/wandboard/boot.scr.txt b/board/wandboard/boot.scr.txt
new file mode 100644
index 0000000..7a8aa4b
--- /dev/null
+++ b/board/wandboard/boot.scr.txt
@@ -0,0 +1,7 @@
+setenv finduuid "part uuid mmc 0:1 uuid"
+run finduuid
+run findfdt
+setenv bootargs "console=ttymxc0,115200 root=PARTUUID=${uuid} rootwait rootfstype=ext4"
+load mmc 0:1 ${fdt_addr} boot/${fdtfile}
+load mmc 0:1 ${loadaddr} boot/zImage
+bootz ${loadaddr} - ${fdt_addr}
diff --git a/board/wandboard/genimage.cfg b/board/wandboard/genimage.cfg
index 745cec3..b23a91b 100644
--- a/board/wandboard/genimage.cfg
+++ b/board/wandboard/genimage.cfg
@@ -23,13 +23,6 @@ image sdcard.img {
     offset = 70656
   }
 
-  partition u-boot-env {
-    in-partition-table = "no"
-    image = "uboot-env.bin"
-    offset = 393216
-    size = 8192
-  }
-
   partition rootfs {
     partition-type = 0x83
     image = "rootfs.ext4"
diff --git a/board/wandboard/post-build.sh b/board/wandboard/post-build.sh
new file mode 100755
index 0000000..07c480e
--- /dev/null
+++ b/board/wandboard/post-build.sh
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+$HOST_DIR/usr/bin/mkimage -A arm -O linux -T script -C none  \
+-n "boot script" -d $BOARD_DIR/boot.scr.txt $BOARD_DIR/boot.scr
+
+install -m 0644 -D $BOARD_DIR/boot.scr $TARGET_DIR/boot/boot.scr
diff --git a/board/wandboard/uboot-env.txt b/board/wandboard/uboot-env.txt
deleted file mode 100644
index f8c4fc1..0000000
--- a/board/wandboard/uboot-env.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-baudrate=115200
-boot_fdt=try
-bootcmd=run findfdt; mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi
-bootdelay=3
-bootscript=echo Running bootscript from mmc ...; source
-console=ttymxc0
-ethact=FEC
-ethaddr=00:1f:7b:b2:05:ee
-ethprime=FEC
-loadaddr=0x12000000
-fdt_addr=0x18000000
-fdt_high=0xffffffff
-fdtfile=undefined
-findfdt=if test $board_rev = MX6Q ; then setenv fdtfile imx6q-wandboard.dtb; fi; if test $board_rev = MX6DL ; then setenv fdtfile imx6dl-wandboard.dtb; fi; if test $fdtfile = undefined; then echo WARNING: Could not determine dtb to use; fi;
-loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/${fdtfile}
-loadbootscript=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};
-loadimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
-mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}; run videoargs
-videoargs=setenv nextcon 0; if hdmidet; then setenv bootargs ${bootargs} video=mxcfb${nextcon}:dev=hdmi,1280x720M at 60,if=RGB24; setenv fbmen fbmem=28M; setexpr nextcon ${nextcon} + 1; else echo - no HDMI monitor;fi; i2c dev 1; if i2c probe 0x10; then setenv bootargs ${bootargs} video=mxcfb${nextcon}:dev=lcd,800x480 at 60,if=RGB666,bpp=32; if test 0 -eq ${nextcon}; then setenv fbmem fbmem=10M; else setenv fbmem ${fbmem},10M; fi; setexpr nextcon ${nextcon} + 1; else echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';fi; setenv bootargs ${bootargs} ${fbmem}
-mmcboot=echo Booting from mmc ...; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
-mmcdev=0
-mmcpart=1
-mmcroot=/dev/mmcblk2p1 rootwait rw
-netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
-netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${image}; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} /boot/${fdtfile}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
-script=boot/boot.scr
-image=boot/zImage
-splashpos=m,m
diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig
index 33b7f0d..4795b12 100644
--- a/configs/wandboard_defconfig
+++ b/configs/wandboard_defconfig
@@ -4,21 +4,17 @@ BR2_cortex_a9=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/wandboard/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/wandboard/post-image.sh"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_USE_DEFCONFIG=y
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="wandboard"
+BR2_TARGET_UBOOT_BOARDNAME="wandboard"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.07"
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_TARGET_UBOOT_ENVIMAGE=y
-BR2_TARGET_UBOOT_ENVIMAGE_SOURCE="board/wandboard/uboot-env.txt"
-BR2_TARGET_UBOOT_ENVIMAGE_SIZE="0x2000"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-- 
2.7.4

[Buildroot] [PATCH 3/4] wandboard: Use U-Boot 2016.07

[Thomas Petazzoni]

Hello,

On Sun, 11 Sep 2016 16:42:05 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> Upgrade U-Boot version to 2016.07 and make proper use of U-Boot
> distro configuration features.
> 
> Provide a boot.scr binary script that is one of the standard ways to
> pass a U-Boot script with distro features enabled.
> 
> With this method the uboot-env.txt file is no longer needed, so it is
> removed.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  board/wandboard/boot.scr.txt  |  7 +++++++
>  board/wandboard/genimage.cfg  |  7 -------
>  board/wandboard/post-build.sh |  8 ++++++++
>  board/wandboard/uboot-env.txt | 28 ----------------------------
>  configs/wandboard_defconfig   | 10 +++-------
>  5 files changed, 18 insertions(+), 42 deletions(-)
>  create mode 100644 board/wandboard/boot.scr.txt
>  create mode 100755 board/wandboard/post-build.sh
>  delete mode 100644 board/wandboard/uboot-env.txt

Applied to master, thanks.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH 4/4] wandboard: Select required host tools for SD card generation

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@nxp.com>

Select the required host tools for proper SD card generation.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 configs/wandboard_defconfig | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig
index 4795b12..67041a6 100644
--- a/configs/wandboard_defconfig
+++ b/configs/wandboard_defconfig
@@ -3,7 +3,6 @@ BR2_cortex_a9=y
 # Linux headers same as kernel, a 4.7 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/wandboard/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/wandboard/post-image.sh"
 BR2_TARGET_ROOTFS_EXT2=y
@@ -23,3 +22,8 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-wandboard imx6dl-wandboard imx6q-wandboard-revb1 imx6dl-wandboard-revb1"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
+# required tools to create the SD card image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-- 
2.7.4

[Buildroot] [PATCH 4/4] wandboard: Select required host tools for SD card generation

[Thomas Petazzoni]

Hello,

On Sun, 11 Sep 2016 16:42:06 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> Select the required host tools for proper SD card generation.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  configs/wandboard_defconfig | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)

Applied to master, thanks.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH 1/4] wandboard: Use ext4 rootfs type

[Thomas Petazzoni]

Hello,

On Sun, 11 Sep 2016 16:42:03 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> Use ext4 rootfs type instead of ext2, as it is more reliable.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

This commit log is incorrect: the ext4 filesystem is already used.
Indeed, the ext4 image is a symlink to the ext2 image, and the ext2
image is in fact an ext4 image:

-rw-r--r-- 1 thomas thomas 3763200 sept. 11 21:54 rootfs.ext2
lrwxrwxrwx 1 thomas thomas      11 sept. 11 21:54 rootfs.ext4 -> rootfs.ext2

So, using the .ext4 image is probably a good idea, but the commit log
should reflect that.

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com