* [Buildroot] [PATCH v2 4/4] configs/mx6sx_udoo_neo: Bump to kernel 4.10
2017-02-20 11:57 [Buildroot] [PATCH v2 1/4] linux: bump default to version 4.10 Fabio Estevam
2017-02-20 11:57 ` [Buildroot] [PATCH v2 2/4] toolchain: add 4.10.x choice for headers Fabio Estevam
2017-02-20 11:57 ` [Buildroot] [PATCH v2 3/4] linux-headers: bump to 4.10 kernel version Fabio Estevam
@ 2017-02-20 11:57 ` Fabio Estevam
2017-02-20 20:58 ` [Buildroot] [PATCH v2 1/4] linux: bump default to version 4.10 Thomas Petazzoni
3 siblings, 0 replies; 5+ messages in thread
From: Fabio Estevam @ 2017-02-20 11:57 UTC (permalink / raw)
To: buildroot
The imx6sx-udoo-neo dts patches have been upstreamed in kernel 4.10,
so bump to this version and remove the local patches.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10 (Baruch)
.../neo/patches/linux/0001-udoo_neo_support.patch | 560 ---------------------
configs/mx6sx_udoo_neo_defconfig | 7 +-
2 files changed, 3 insertions(+), 564 deletions(-)
delete mode 100644 board/udoo/neo/patches/linux/0001-udoo_neo_support.patch
diff --git a/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch b/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch
deleted file mode 100644
index 2e8cea5..0000000
--- a/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch
+++ /dev/null
@@ -1,560 +0,0 @@
-From 76e691fc7653b85d390e58710e5c7db73ca49367 Mon Sep 17 00:00:00 2001
-From: Andreas F?rber <afaerber@suse.de>
-Date: Sun, 16 Oct 2016 16:44:23 +0200
-Subject: ARM: dts: imx6sx: Add UDOO Neo support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add initial device trees for UDOO Neo Basic, Extended and Full boards:
-* Serial console is enabled, other serial ports are prepared.
-* I2C based PMIC is enabled.
-* Ethernet is enabled for Basic and Full.
-* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator.
-* Both user LEDs are enabled, with the orange one reserved for the M4
- and with the SD card as default trigger for the red LED.
-
-The decision on a board compatible string is deferred to later.
-
-Cc: Ettore Chimenti <ettore.chimenti@udoo.org>
-Signed-off-by: Andreas F?rber <afaerber@suse.de>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/Makefile | 5 +-
- arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 69 ++++++
- arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 54 +++++
- arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 69 ++++++
- arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 293 +++++++++++++++++++++++++
- 5 files changed, 489 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
- create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
- create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
- create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 019976b..da0197d 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -417,7 +417,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
- imx6sx-sabreauto.dtb \
- imx6sx-sdb-reva.dtb \
- imx6sx-sdb-sai.dtb \
-- imx6sx-sdb.dtb
-+ imx6sx-sdb.dtb \
-+ imx6sx-udoo-neo-basic.dtb \
-+ imx6sx-udoo-neo-extended.dtb \
-+ imx6sx-udoo-neo-full.dtb
- dtb-$(CONFIG_SOC_IMX6UL) += \
- imx6ul-14x14-evk.dtb \
- imx6ul-geam-kit.dtb \
-diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
-new file mode 100644
-index 0000000..0b88878
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
-@@ -0,0 +1,69 @@
-+/*
-+ * Copyright (c) 2016 Andreas F?rber
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This library is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This library is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6sx-udoo-neo.dtsi"
-+
-+/ {
-+ model = "UDOO Neo Basic";
-+ compatible = "fsl,imx6sx";
-+
-+ memory {
-+ reg = <0x80000000 0x20000000>;
-+ };
-+};
-+
-+&fec1 {
-+ phy-handle = <ðphy1>;
-+ status = "okay";
-+
-+ mdio {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ethphy1: ethernet-phy at 0 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <0>;
-+ };
-+ };
-+};
-diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
-new file mode 100644
-index 0000000..d6fdd17
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
-@@ -0,0 +1,54 @@
-+/*
-+ * Copyright (c) 2016 Andreas F?rber
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This library is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This library is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6sx-udoo-neo.dtsi"
-+
-+/ {
-+ model = "UDOO Neo Extended";
-+ compatible = "fsl,imx6sx";
-+
-+ memory {
-+ reg = <0x80000000 0x40000000>;
-+ };
-+};
-diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
-new file mode 100644
-index 0000000..d8c3577
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
-@@ -0,0 +1,69 @@
-+/*
-+ * Copyright (c) 2016 Andreas F?rber
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This library is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This library is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6sx-udoo-neo.dtsi"
-+
-+/ {
-+ model = "UDOO Neo Full";
-+ compatible = "fsl,imx6sx";
-+
-+ memory {
-+ reg = <0x80000000 0x40000000>;
-+ };
-+};
-+
-+&fec1 {
-+ phy-handle = <ðphy1>;
-+ status = "okay";
-+
-+ mdio {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ethphy1: ethernet-phy at 0 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <0>;
-+ };
-+ };
-+};
-diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
-new file mode 100644
-index 0000000..2b65d26
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
-@@ -0,0 +1,293 @@
-+/*
-+ * Copyright (c) 2016 Andreas F?rber
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This library is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This library is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "imx6sx.dtsi"
-+
-+/ {
-+ compatible = "fsl,imx6sx";
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ red {
-+ label = "udoo-neo:red:mmc";
-+ gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
-+ default-state = "off";
-+ linux,default-trigger = "mmc0";
-+ };
-+
-+ orange {
-+ label = "udoo-neo:orange:user";
-+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+ };
-+
-+ reg_sdio_pwr: regulator-sdio-pwr {
-+ compatible = "regulator-fixed";
-+ gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ regulator-name = "SDIO_PWR";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ };
-+};
-+
-+&cpu0 {
-+ arm-supply = <&sw1a_reg>;
-+ soc-supply = <&sw1c_reg>;
-+};
-+
-+&fec1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet1>;
-+ phy-mode = "rmii";
-+ phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ clock-frequency = <100000>;
-+ status = "okay";
-+
-+ pmic: pmic at 08 {
-+ compatible = "fsl,pfuze3000";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1a {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1475000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1b {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1475000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1850000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3 {
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <1650000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vldo1 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen2_reg: vldo2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vccsd {
-+ regulator-min-microvolt = <2850000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen4_reg: v33 {
-+ regulator-min-microvolt = <2850000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vldo4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl_enet1: enet1grp {
-+ fsl,pins =
-+ <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>,
-+ <MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1>,
-+ <MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1>,
-+ <MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1>,
-+ <MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1>,
-+ <MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1>,
-+
-+ <MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x3081>,
-+ <MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x3081>,
-+ <MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081>,
-+ <MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081>,
-+ <MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081>,
-+ <MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x3081>,
-+
-+ <MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91>;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins =
-+ <MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1>,
-+ <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins =
-+ <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>,
-+ <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins =
-+ <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>,
-+ <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins =
-+ <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>,
-+ <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>;
-+ };
-+
-+ pinctrl_uart6: uart6grp {
-+ fsl,pins =
-+ <MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x1b0b1>,
-+ <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>,
-+ <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>,
-+ <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>,
-+ <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>,
-+ <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>,
-+ <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>,
-+ <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>;
-+ };
-+
-+ pinctrl_usdhc2: usdhc2grp {
-+ fsl,pins =
-+ <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>,
-+ <MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059>,
-+ <MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059>,
-+ <MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059>,
-+ <MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059>,
-+ <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>,
-+ <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */
-+ };
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+/* Cortex-M4 serial */
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "disabled";
-+};
-+
-+/* Arduino serial */
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "disabled";
-+};
-+
-+&uart6 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart6>;
-+ uart-has-rtscts;
-+ status = "disabled";
-+};
-+
-+&usdhc2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc2>;
-+ vmmc-supply = <®_sdio_pwr>;
-+ bus-width = <4>;
-+ cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
-+ no-1-8-v;
-+ keep-power-in-suspend;
-+ wakeup-source;
-+ status = "okay";
-+};
---
-cgit v0.12
diff --git a/configs/mx6sx_udoo_neo_defconfig b/configs/mx6sx_udoo_neo_defconfig
index a465eb9..53f0ee8 100644
--- a/configs/mx6sx_udoo_neo_defconfig
+++ b/configs/mx6sx_udoo_neo_defconfig
@@ -3,11 +3,10 @@ BR2_cortex_a9=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_FPU_VFPV3=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.10 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10=y
BR2_ROOTFS_POST_BUILD_SCRIPT="board/udoo/neo/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/udoo/neo/post-image.sh"
-BR2_GLOBAL_PATCH_DIR="board/udoo/neo/patches"
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_UBOOT=y
@@ -19,7 +18,7 @@ BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="SPL"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.10"
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-udoo-neo-basic imx6sx-udoo-neo-full imx6sx-udoo-neo-extended"
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread