From: Fabio Estevam <festevam@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/2] imx8mqevk: readme: Put switch configuration for SD card boot
Date: Tue, 15 May 2018 21:24:11 -0300 [thread overview]
Message-ID: <1526430252-28624-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam@nxp.com>
Improve the documentation by adding the configuration of SW801 and SW802
switches for SD card boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
board/freescale/imx8mqevk/readme.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/board/freescale/imx8mqevk/readme.txt b/board/freescale/imx8mqevk/readme.txt
index d50dd6e..cb7e1dc 100644
--- a/board/freescale/imx8mqevk/readme.txt
+++ b/board/freescale/imx8mqevk/readme.txt
@@ -63,6 +63,9 @@ Boot the i.MX8mq EVK board
To boot your newly created system:
- insert the SD card in the SD slot of the board;
+- Configure the switches as follows:
+SW801: ON ON OFF OFF
+SW802: ON OFF
- put a micro USB cable into the Debug USB Port and connect using a terminal
emulator at 115200 bps, 8n1;
- power on the board.
--
2.7.4
next reply other threads:[~2018-05-16 0:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-16 0:24 Fabio Estevam [this message]
2018-05-16 0:24 ` [Buildroot] [PATCH 2/2] imx8mqevk: readme: Write the SoC name in capital letters Fabio Estevam
2018-05-17 20:21 ` [Buildroot] [PATCH 1/2] imx8mqevk: readme: Put switch configuration for SD card boot Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526430252-28624-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox