[Buildroot] [PATCH 1/2] imx8mqevk: readme: Put switch configuration for SD card boot

[Buildroot] [PATCH 1/2] imx8mqevk: readme: Put switch configuration for SD card boot

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@nxp.com>

Improve the documentation by adding the configuration of SW801 and SW802
switches for SD card boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 board/freescale/imx8mqevk/readme.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/board/freescale/imx8mqevk/readme.txt b/board/freescale/imx8mqevk/readme.txt
index d50dd6e..cb7e1dc 100644
--- a/board/freescale/imx8mqevk/readme.txt
+++ b/board/freescale/imx8mqevk/readme.txt
@@ -63,6 +63,9 @@ Boot the i.MX8mq EVK board
 
 To boot your newly created system:
 - insert the SD card in the SD slot of the board;
+- Configure the switches as follows:
+SW801:	ON	ON	OFF	OFF
+SW802:	ON	OFF
 - put a micro USB cable into the Debug USB Port and connect using a terminal
   emulator at 115200 bps, 8n1;
 - power on the board.
-- 
2.7.4

[Buildroot] [PATCH 2/2] imx8mqevk: readme: Write the SoC name in capital letters

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@nxp.com>

Use "i.MX8MQ" (in capital letters) for the SoC name for better
readability.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 board/freescale/imx8mqevk/readme.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/board/freescale/imx8mqevk/readme.txt b/board/freescale/imx8mqevk/readme.txt
index cb7e1dc..1840290 100644
--- a/board/freescale/imx8mqevk/readme.txt
+++ b/board/freescale/imx8mqevk/readme.txt
@@ -1,8 +1,8 @@
 ***************************
-Freescale i.MX8mq EVK board
+Freescale i.MX8MQ EVK board
 ***************************
 
-This file documents the Buildroot support for the Freescale i.MX8mq
+This file documents the Buildroot support for the Freescale i.MX8MQ
 EVK board.
 
 Hardware support
@@ -14,7 +14,7 @@ support for GPU, VPU and other HW features.
 Build
 =====
 
-First, configure Buildroot for the i.MX8mq EVK board:
+First, configure Buildroot for the i.MX8MQ EVK board:
 
   make freescale_imx8mqevk_defconfig
 
@@ -58,7 +58,7 @@ command as root:
 For details about the medium image layout, see the definition in
 board/freescale/common/imx/genimage.cfg.template_imx8.
 
-Boot the i.MX8mq EVK board
+Boot the i.MX8MQ EVK board
 ==========================
 
 To boot your newly created system:
-- 
2.7.4

[Buildroot] [PATCH 1/2] imx8mqevk: readme: Put switch configuration for SD card boot

[Thomas Petazzoni]

Hello,

On Tue, 15 May 2018 21:24:11 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> Improve the documentation by adding the configuration of SW801 and SW802
> switches for SD card boot.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  board/freescale/imx8mqevk/readme.txt | 3 +++
>  1 file changed, 3 insertions(+)

Both applied to master, thanks.

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com