From: Denis OSTERLAND <denis.osterland@diehl.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] u-boot: add option to generate env image from default env
Date: Tue, 9 Oct 2018 07:07:36 +0000 [thread overview]
Message-ID: <1539068855.6269.16.camel@diehl.com> (raw)
In-Reply-To: <16db145d-edf3-787d-bb3c-3a50c340eb1c@mind.be>
Hi Arnout,
thanks for the review.
Am Montag, den 08.10.2018, 19:33 +0200 schrieb Arnout Vandecappelle:
> > ?
> > +choice
> > + prompt "source"
> ?It's not immediately obvious that this is the source of the envimage, so better
> "Source for environment".
clear
>
> >
> > +
> > +config BR2_TARGET_UBOOT_ENVIMAGE_TEXTFILE
> ?I would call this BR2_TARGET_UBOOT_ENVIMAGE_CUSTOM to be consistent with the
> other uses of custom config files. However, see below.
>
> >
> > + bool "text file"
> ?Here as well: "custom".
okay
>
> >
> > +
> > +config BR2_TARGET_UBOOT_ENVIMAGE_BUIILTIN
> ?and here _DEFAULT
>
> >
> > + bool "compiled in"
> ?and "default".
okay
>
> >
> > + help
> > + ??Use the default env from u-boot image.
> > + ??requires >= v2018.03
> > +
> > +endchoice # source
> > +
> > ?config BR2_TARGET_UBOOT_ENVIMAGE_SOURCE
> > ? string "Source files for environment"
> > + depends on BR2_TARGET_UBOOT_ENVIMAGE_TEXTFILE
> ?However, I think it would be simpler to just allow this option to be empty. In
> other words, remove the choice, and add something like the following at the end
> of the help text:
>
> ??For U-Boot >= v2018.03, it is possible to leave this empty. In that
> ??case, the default environment for the target configuration will be
> ??used.
>
> ?This is just an idea, if you don't like it, feel free to keep the current solution.
Well, I thought about it.
contra:
?- adds additional configuration switches
pro:
?- clear on first look (not required to read help first)
?- easier to extend (add other sources in future)
?- keeps current behavior (failed to build, if only BR2_TARGET_UBOOT_ENVIMAGE is selected)
I think it is not very likely that other sources were implemented.
Maybe it would be nice to just tick BR2_TARGET_UBOOT_ENVIMAGE and
empty default of SOURCE will lead to default env.
What do you think?
>
>
> >
> > ? help
> > ? ??Text files describing the environment. Files should have
> > ? ??lines of the form var=value, one per line. Blank lines and
> > diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk
> > index c5abc125f3..ae9e38c8c2 100644
> > --- a/boot/uboot/uboot.mk
> > +++ b/boot/uboot/uboot.mk
> > @@ -263,7 +263,9 @@ endef
> > ?
> > ?ifneq ($(BR2_TARGET_UBOOT_ENVIMAGE),)
> > ?define UBOOT_GENERATE_ENV_IMAGE
> > - cat $(call qstrip,$(BR2_TARGET_UBOOT_ENVIMAGE_SOURCE)) \
> > + $(if $(BR2_TARGET_UBOOT_ENVIMAGE_BUIILTIN), \
> ?With the choice removed, this test could be:
>
> $(if $(call qstrip,$(BR2_TARGET_UBOOT_ENVIMAGE_SOURCE)),
>
> but then it is better to factor it out in a separate variable, e.g.
> UBOOT_GENERATE_ENV_FILE, that is protected by an ifdef.
indeed
>
> >
> > + CROSS_COMPILE="$(TARGET_CROSS)" $(@D)/scripts/get_default_envs.sh $(@D), \
> > + cat $(call qstrip,$(BR2_TARGET_UBOOT_ENVIMAGE_SOURCE))) \
> > ? >$(@D)/buildroot-env.txt
> > ? $(HOST_DIR)/bin/mkenvimage -s $(BR2_TARGET_UBOOT_ENVIMAGE_SIZE) \
> > ? $(if $(BR2_TARGET_UBOOT_ENVIMAGE_REDUNDANT),-r) \
> > @@ -376,9 +378,11 @@ endef
> > ?
> > ?ifeq ($(BR2_TARGET_UBOOT_ENVIMAGE),y)
> > ?ifeq ($(BR_BUILDING),y)
> > +ifeq ($(BR2_TARGET_UBOOT_ENVIMAGE_TEXTFILE),y)
> > ?ifeq ($(call qstrip,$(BR2_TARGET_UBOOT_ENVIMAGE_SOURCE)),)
> > ?$(error Please define a source file for Uboot environment (BR2_TARGET_UBOOT_ENVIMAGE_SOURCE setting))
> > ?endif
> > +endif
> ?With the choice removed, this entire condition+error would just be removed.
remove code is always nice ;-)
>
> ?Regards,
> ?Arnout
Regards Denis
Diehl Connectivity Solutions GmbH
Gesch?ftsf?hrung: Horst Leonberger
Sitz der Gesellschaft: N?rnberg - Registergericht: Amtsgericht
N?rnberg: HRB 32315
___________________________________________________________________________________________________
Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht.
Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung und/oder Publikation dieser E-Mail ist strengstens untersagt.
The contents of the above mentioned e-mail is not legally binding. This e-mail contains confidential and/or legally protected information. Please inform us if you have received this e-mail by
mistake and delete it in such a case. Each unauthorized reproduction, disclosure, alteration, distribution and/or publication of this e-mail is strictly prohibited.
next prev parent reply other threads:[~2018-10-09 7:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-02 5:38 [Buildroot] [PATCH] u-boot: add option to generate env image from default env Denis OSTERLAND
2018-10-08 17:33 ` Arnout Vandecappelle
2018-10-09 7:07 ` Denis OSTERLAND [this message]
2018-10-09 8:01 ` Arnout Vandecappelle
2018-10-09 9:20 ` Denis OSTERLAND
2019-01-14 15:28 ` [Buildroot] [PATCH v2] " Denis OSTERLAND
2018-12-04 12:55 ` Denis OSTERLAND
2019-08-01 10:32 ` Arnout Vandecappelle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539068855.6269.16.camel@diehl.com \
--to=denis.osterland@diehl.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox