[Buildroot] svn commit: trunk/buildroot/target

Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-01-30 17:38 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-01-30 17:38 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-01-30 09:38:41 -0800 (Tue, 30 Jan 2007)
New Revision: 17675

Log:
- honor the given kernel format and fallback to zImage if none was specified


Modified:
   trunk/buildroot/target/linux26.mk


Changeset:
Modified: trunk/buildroot/target/linux26.mk
===================================================================
--- trunk/buildroot/target/linux26.mk	2007-01-30 17:37:35 UTC (rev 17674)
+++ trunk/buildroot/target/linux26.mk	2007-01-30 17:38:41 UTC (rev 17675)
@@ -22,7 +22,12 @@
 
 #LINUX26_FORMAT=vmlinux
 #LINUX26_BINLOC=$(LINUX26_FORMAT)
-LINUX26_FORMAT=bzImage
+
+# Has to be set by the target/device
+# LINUX26_FORMAT=bzImage
+ifndef LINUX26_FORMAT
+LINUX26_FORMAT=zImage
+endif
 LINUX26_BINLOC=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
 
 # Linux kernel configuration file
@@ -72,6 +77,11 @@
 
 $(LINUX26_DIR)/.configured:  $(LINUX26_DIR)/.patched  $(LINUX26_KCONFIG)
 	-cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
+	$(SED) 's,^CONFIG_EABI.*,# CONFIG_EABI is not set,g' \
+		$(LINUX26_DIR)/.config
+ifeq ($(BR2_ARM_EABI),y)
+	echo "CONFIG_EABI=y" >> $(LINUX26_DIR)/.config
+endif
 	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
 	touch $(LINUX26_DIR)/.configured
 
@@ -80,7 +90,7 @@
 	touch $(LINUX26_DIR)/.depend_done
 
 $(LINUX26_KERNEL): $(LINUX26_DIR)/.depend_done
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(LINUX26_FORMAT) bzImage
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(LINUX26_FORMAT)
 	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
 	cp -fa $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
 	touch -c $(LINUX26_KERNEL)

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-02-04 16:30 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-02-04 16:30 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-02-04 08:30:07 -0800 (Sun, 04 Feb 2007)
New Revision: 17762

Log:
- propagate BR2_ARM_EABI setting down to LINUX26_KCONFIG


Modified:
   trunk/buildroot/target/linux26.mk


Changeset:
Modified: trunk/buildroot/target/linux26.mk
===================================================================
--- trunk/buildroot/target/linux26.mk	2007-02-04 16:11:51 UTC (rev 17761)
+++ trunk/buildroot/target/linux26.mk	2007-02-04 16:30:07 UTC (rev 17762)
@@ -67,38 +67,40 @@
 	# Rename the dir from the downloaded version to the AFTER patch version
 	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(BUILD_DIR)/linux-$(LINUX26_VERSION)
 endif
-	touch $(LINUX26_DIR)/.unpacked
+	touch $@
 
 $(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked
 	toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR)
-	touch $(LINUX26_DIR)/.patched
-
+	touch $@
 endif # ($(LINUX26_VERSION),$(LINUX_HEADERS_VERSION))
 
 $(LINUX26_DIR)/.configured:  $(LINUX26_DIR)/.patched  $(LINUX26_KCONFIG)
-	-cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-	$(SED) 's,^CONFIG_EABI.*,# CONFIG_EABI is not set,g' \
-		$(LINUX26_DIR)/.config
+	cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
+	$(SED) '/CONFIG_AEABI/d' $(LINUX26_DIR)/.config
 ifeq ($(BR2_ARM_EABI),y)
-	echo "CONFIG_EABI=y" >> $(LINUX26_DIR)/.config
+	echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
+	$(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
+	echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config
+else
+	echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config
 endif
 	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
-	touch $(LINUX26_DIR)/.configured
+	touch $@
 
 $(LINUX26_DIR)/.depend_done:  $(LINUX26_DIR)/.configured
 	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
-	touch $(LINUX26_DIR)/.depend_done
+	touch $@
 
 $(LINUX26_KERNEL): $(LINUX26_DIR)/.depend_done
 	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(LINUX26_FORMAT)
 	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
-	cp -fa $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
-	touch -c $(LINUX26_KERNEL)
+	cp -dpf $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
+	touch -c $@
 
 $(TARGET_DIR)/boot/$(LINUX26_BINLOC): $(LINUX26_KERNEL)
 	[ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot
 	cp -a $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_DIR)/System.map $(TARGET_DIR)/boot/
-	touch -c $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
+	touch -c $@
 
 $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_KERNEL)
 	rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
@@ -107,7 +109,7 @@
 		DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \
 		INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
 	rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build
-	touch -c $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
+	touch -c $@
 
 linux26-menuconfig: $(LINUX26_DIR)/.patched
 	[ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-03-19 10:49 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-03-19 10:49 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-03-19 03:49:11 -0700 (Mon, 19 Mar 2007)
New Revision: 18157

Log:
- pin LINUX_VERSION. Closes #1277


Modified:
   trunk/buildroot/target/linux26.mk


Changeset:
Modified: trunk/buildroot/target/linux26.mk
===================================================================
--- trunk/buildroot/target/linux26.mk	2007-03-19 09:59:50 UTC (rev 18156)
+++ trunk/buildroot/target/linux26.mk	2007-03-19 10:49:11 UTC (rev 18157)
@@ -41,7 +41,7 @@
 LINUX26_DIR=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
 
 # for packages that need it
-LINUX_VERSION=$(LINUX_VERSION)
+LINUX_VERSION:=$(LINUX_VERSION)
 LINUX_DIR=$(LINUX26_DIR)
 LINUX_KERNEL=$(LINUX26_KERNEL)
 

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-03-22 18:14 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-03-22 18:14 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-03-22 11:14:23 -0700 (Thu, 22 Mar 2007)
New Revision: 18205

Log:
- add a question for andersee


Modified:
   trunk/buildroot/target/linux26.mk


Changeset:
Modified: trunk/buildroot/target/linux26.mk
===================================================================
--- trunk/buildroot/target/linux26.mk	2007-03-22 17:21:18 UTC (rev 18204)
+++ trunk/buildroot/target/linux26.mk	2007-03-22 18:14:23 UTC (rev 18205)
@@ -8,6 +8,7 @@
 
 ifeq ($(LINUX_HEADERS_VERSION),)
 # Version of Linux to download and then apply patches to
+# XXX: andersee, i do not understand why we need this (BF)
 DOWNLOAD_LINUX26_VERSION=2.6.19.2
 # Version of Linux after applying any patches
 LINUX26_VERSION=2.6.19.2
@@ -70,7 +71,7 @@
 	$(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
 ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
 	# Rename the dir from the downloaded version to the AFTER patch version
-	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(BUILD_DIR)/linux-$(LINUX26_VERSION)
+	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
 endif
 	touch $@
 

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-04-17 17:30 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-04-17 17:30 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-04-17 10:30:12 -0700 (Tue, 17 Apr 2007)
New Revision: 18481

Log:
- strip eventual quotes


Modified:
   trunk/buildroot/target/Makefile.in


Changeset:
Modified: trunk/buildroot/target/Makefile.in
===================================================================
--- trunk/buildroot/target/Makefile.in	2007-04-17 17:24:29 UTC (rev 18480)
+++ trunk/buildroot/target/Makefile.in	2007-04-17 17:30:12 UTC (rev 18481)
@@ -1,3 +1,8 @@
+BR2_PACKAGE_LINUX_FORMAT:=$(strip $(subst ",,$(BR2_PACKAGE_LINUX_FORMAT)))
+#"))
+BR2_PACKAGE_LINUX_KCONFIG:=$(strip $(subst ",,$(BR2_PACKAGE_LINUX_KCONFIG)))
+#"))
+
 # make sure to put everything that is board-specific before the tarroot targets
 include target/generic/Makefile.in
 

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-06-06 19:59 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-06-06 19:59 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-06-06 12:59:01 -0700 (Wed, 06 Jun 2007)
New Revision: 18762

Log:
- fix typo which led to a superfluous cp invocation


Modified:
   trunk/buildroot/target/linux26.mk


Changeset:
Modified: trunk/buildroot/target/linux26.mk
===================================================================
--- trunk/buildroot/target/linux26.mk	2007-06-06 19:50:05 UTC (rev 18761)
+++ trunk/buildroot/target/linux26.mk	2007-06-06 19:59:01 UTC (rev 18762)
@@ -103,7 +103,7 @@
 	cp -dpf $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
 	touch -c $@
 
-$(TARGET_DIR)/boot/$(LINUX26_BINLOC): $(LINUX26_KERNEL)
+$(TARGET_DIR)/boot/$(LINUX26_FORMAT): $(LINUX26_KERNEL)
 	[ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot
 	cp -a $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_DIR)/System.map $(TARGET_DIR)/boot/
 	touch -c $@
@@ -122,7 +122,7 @@
 	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
 	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
 
-linux26: cross-depmod26 $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
+linux26: cross-depmod26 $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep $(TARGET_DIR)/boot/$(LINUX26_FORMAT)
 
 linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
 

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-06-26 16:36 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-06-26 16:36 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-06-26 09:36:31 -0700 (Tue, 26 Jun 2007)
New Revision: 18945

Log:
- filter out eventual -fPIC -fpic -DPIC flags from the target cflags
  Honor the .config setting for KCONFIG and FORMAT iff not imposed by the target/device. If they are not set in the config, the defaults (zImage etc) still apply.


Modified:
   trunk/buildroot/target/linux26.mk


Changeset:
Modified: trunk/buildroot/target/linux26.mk
===================================================================
--- trunk/buildroot/target/linux26.mk	2007-06-26 16:35:07 UTC (rev 18944)
+++ trunk/buildroot/target/linux26.mk	2007-06-26 16:36:31 UTC (rev 18945)
@@ -24,7 +24,26 @@
 #LINUX26_FORMAT=vmlinux
 #LINUX26_BINLOC=$(LINUX26_FORMAT)
 
+# Linux kernel configuration file
 # Has to be set by the target/device
+# If it is not set by the target/device, then pick the one from .config
+# LINUX26_KCONFIG=$(BR2_BOARD_PATH)/linux26.config
+ifndef LINUX26_KCONFIG
+ifneq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_KCONFIG))),)
+LINUX26_KCONFIG=$(strip $(subst ",,$(BR2_PACKAGE_LINUX_KCONFIG)))
+#"))
+#"))
+endif
+endif
+ifndef LINUX26_FORMAT
+ifneq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_FORMAT))),)
+LINUX26_FORMAT=$(strip $(subst ",,$(BR2_PACKAGE_LINUX_FORMAT)))
+#"))
+#"))
+endif
+endif
+
+# Has to be set by the target/device
 # LINUX26_FORMAT=bzImage
 ifndef LINUX26_FORMAT
 LINUX26_FORMAT=zImage
@@ -35,10 +54,6 @@
 LINUX26_BINLOC=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
 endif
 
-# Linux kernel configuration file
-# Has to be set by the target/device
-# LINUX26_KCONFIG=$(BR2_BOARD_PATH)/linux26.config
-
 # File name for the Linux kernel binary
 LINUX26_KERNEL=linux-kernel-$(LINUX26_VERSION)-$(KERNEL_ARCH)
 
@@ -52,10 +67,10 @@
 
 # kernel patches
 LINUX26_PATCH_DIR=$(BR2_BOARD_PATH)/kernel-patches/
-
+__LINUX26_NO_PIC=-fPIC -fpic -DPIC
 LINUX26_MAKE_FLAGS = HOSTCC="$(HOSTCC)" HOSTCFLAGS=$(HOSTCFLAGS) \
 	ARCH=$(KERNEL_ARCH) \
-	CFLAGS_KERNEL="$(TARGET_CFLAGS)" \
+	CFLAGS_KERNEL="$(filter-out $(__LINUX26_NO_PIC),$(TARGET_CFLAGS))" \
 	INSTALL_MOD_PATH=$(TARGET_DIR) \
 	CROSS_COMPILE=$(KERNEL_CROSS)
 

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-07-08 19:23 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-07-08 19:23 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-07-08 12:22:58 -0700 (Sun, 08 Jul 2007)
New Revision: 19046

Log:
- apply settings for initramfs


Modified:
   trunk/buildroot/target/linux26.mk


Changeset:
Modified: trunk/buildroot/target/linux26.mk
===================================================================
--- trunk/buildroot/target/linux26.mk	2007-07-08 19:22:18 UTC (rev 19045)
+++ trunk/buildroot/target/linux26.mk	2007-07-08 19:22:58 UTC (rev 19046)
@@ -101,7 +101,7 @@
 	touch $@
 endif # ($(LINUX26_VERSION),$(LINUX_HEADERS_VERSION))
 
-$(LINUX26_DIR)/.configured:  $(LINUX26_DIR)/.patched  $(LINUX26_KCONFIG)
+$(LINUX26_DIR)/.configured:  $(LINUX26_DIR)/.patched  $(LINUX26_KCONFIG) $(INITRAMFS_TARGET)
 	cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
 	$(SED) '/CONFIG_AEABI/d' $(LINUX26_DIR)/.config
 ifeq ($(BR2_ARM_EABI),y)
@@ -111,6 +111,14 @@
 else
 	echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config
 endif
+ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
+	$(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
+	echo "CONFIG_INITRAMFS_SOURCE=\"$(INITRAMFS_TARGET)\"" >> \
+		$(LINUX26_DIR)/.config
+	$(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
+	echo "INITRAMFS_ROOT_UID=\"0\"" >> $(LINUX26_DIR)/.config
+	echo "INITRAMFS_ROOT_GID=\"0\"" >> $(LINUX26_DIR)/.config
+endif
 	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
 	touch $@
 

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-07-20 12:03 ulf at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: ulf at uclibc.org @ 2007-07-20 12:03 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2007-07-20 05:03:54 -0700 (Fri, 20 Jul 2007)
New Revision: 19181

Log:
Fix Linux build if BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG is not defined

Modified:
   trunk/buildroot/target/Makefile.in


Changeset:
Modified: trunk/buildroot/target/Makefile.in
===================================================================
--- trunk/buildroot/target/Makefile.in	2007-07-20 11:36:52 UTC (rev 19180)
+++ trunk/buildroot/target/Makefile.in	2007-07-20 12:03:54 UTC (rev 19181)
@@ -18,12 +18,10 @@
 # We already did add the kernel target to TARGETS and now just pull in the rules
 # to actually build this target.
 
-ifeq	($(strip $(subst ",,$(BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG))),n)
-#"))
-include	target/linux/Makefile.in
-endif
 ifeq	($(strip $(subst ",,$(BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG))),y)
 #"))
 include	target/linux-experimental/Makefile.in
+else
+include	target/linux/Makefile.in
 endif
 

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-09-23 22:08 ulf at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: ulf at uclibc.org @ 2007-09-23 22:08 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2007-09-23 15:08:51 -0700 (Sun, 23 Sep 2007)
New Revision: 19981

Log:
Remove useless target/arm directory

Removed:
   trunk/buildroot/target/arm/

Modified:
   trunk/buildroot/target/Makefile.in


Changeset:
Modified: trunk/buildroot/target/Makefile.in
===================================================================
--- trunk/buildroot/target/Makefile.in	2007-09-23 21:23:10 UTC (rev 19980)
+++ trunk/buildroot/target/Makefile.in	2007-09-23 22:08:51 UTC (rev 19981)
@@ -9,7 +9,6 @@
 # this eventually adds the kernel target to TARGETS:
 include target/device/Makefile.in
 include target/x86/Makefile.in
-include target/arm/Makefile.in
 include target/powerpc/Makefile.in
 # and finally build the filesystems/tarballs
 include target/*/*.mk

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-09-29 19:47 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-09-29 19:47 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-09-29 12:47:04 -0700 (Sat, 29 Sep 2007)
New Revision: 20122

Log:
- better use commonly used digits in ISA config


Modified:
   trunk/buildroot/target/Config.in.arch


Changeset:
Modified: trunk/buildroot/target/Config.in.arch
===================================================================
--- trunk/buildroot/target/Config.in.arch	2007-09-29 19:46:02 UTC (rev 20121)
+++ trunk/buildroot/target/Config.in.arch	2007-09-29 19:47:04 UTC (rev 20122)
@@ -129,13 +129,13 @@
 	  Specific CPU variant to use
 
 config BR2_mips_1
-	bool "mips 1"
+	bool "mips I (generic)"
 config BR2_mips_2
-	bool "mips 2"
+	bool "mips II"
 config BR2_mips_3
-	bool "mips 3"
+	bool "mips III"
 config BR2_mips_4
-	bool "mips 4"
+	bool "mips IV"
 config BR2_mips_32
 	bool "mips 32"
 config BR2_mips_32r2

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-09-30 12:42 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-09-30 12:42 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-09-30 05:42:11 -0700 (Sun, 30 Sep 2007)
New Revision: 20139

Log:
- fix typo


Modified:
   trunk/buildroot/target/Config.in.arch


Changeset:
Modified: trunk/buildroot/target/Config.in.arch
===================================================================
--- trunk/buildroot/target/Config.in.arch	2007-09-30 00:08:58 UTC (rev 20138)
+++ trunk/buildroot/target/Config.in.arch	2007-09-30 12:42:11 UTC (rev 20139)
@@ -142,7 +142,7 @@
 	bool "mips 32r2"
 config BR2_mips_64
 	bool "mips 64"
-config BR2_mips16_
+config BR2_mips_16
 	bool "mips 16"
 endchoice
 

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2007-10-05 11:03 aldot at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: aldot at uclibc.org @ 2007-10-05 11:03 UTC (permalink / raw)
  To: buildroot

Author: aldot
Date: 2007-10-05 04:03:07 -0700 (Fri, 05 Oct 2007)
New Revision: 20178

Log:
- comment out apparently unused? cruft (linux-experimental)


Modified:
   trunk/buildroot/target/Makefile.in


Changeset:
Modified: trunk/buildroot/target/Makefile.in
===================================================================
--- trunk/buildroot/target/Makefile.in	2007-10-05 11:02:29 UTC (rev 20177)
+++ trunk/buildroot/target/Makefile.in	2007-10-05 11:03:07 UTC (rev 20178)
@@ -17,11 +17,11 @@
 # We already did add the kernel target to TARGETS and now just pull in the rules
 # to actually build this target.
 
-ifeq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG))),y)
+#ifeq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG))),y)
 #"))
+#include target/linux/Makefile.in
+##include target/linux-experimental/Makefile.in
+#else
 include target/linux/Makefile.in
-#include target/linux-experimental/Makefile.in
-else
-include target/linux/Makefile.in
-endif
+#endif
 

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2008-03-06 19:00 ninevoltz at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: ninevoltz at uclibc.org @ 2008-03-06 19:00 UTC (permalink / raw)
  To: buildroot

Author: ninevoltz
Date: 2008-03-06 11:00:38 -0800 (Thu, 06 Mar 2008)
New Revision: 21256

Log:
added u-boot location

Modified:
   trunk/buildroot/target/Config.in
   trunk/buildroot/target/Makefile.in


Changeset:
Modified: trunk/buildroot/target/Config.in
===================================================================
--- trunk/buildroot/target/Config.in	2008-03-06 18:59:57 UTC (rev 21255)
+++ trunk/buildroot/target/Config.in	2008-03-06 19:00:38 UTC (rev 21256)
@@ -18,6 +18,7 @@
 #source "target/x86/grub2/Config.in"
 source "target/x86/syslinux/Config.in"
 source "target/powerpc/yaboot/Config.in"
+source "target/device/Atmel/u-boot/Config.in"
 endmenu
 
 menu "Kernel"

Modified: trunk/buildroot/target/Makefile.in
===================================================================
--- trunk/buildroot/target/Makefile.in	2008-03-06 18:59:57 UTC (rev 21255)
+++ trunk/buildroot/target/Makefile.in	2008-03-06 19:00:38 UTC (rev 21256)
@@ -10,6 +10,8 @@
 include target/device/Makefile.in
 include target/x86/Makefile.in
 include target/powerpc/Makefile.in
+include target/device/Atmel/u-boot/u-boot.mk
+
 # and finally build the filesystems/tarballs
 include target/*/*.mk
 

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2008-03-11  8:49 jacmet at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: jacmet at uclibc.org @ 2008-03-11  8:49 UTC (permalink / raw)
  To: buildroot

Author: jacmet
Date: 2008-03-11 01:49:45 -0700 (Tue, 11 Mar 2008)
New Revision: 21287

Log:
buildroot: fix missing ARCH for some x86 variants

Patch by Nigel Kukard.


Modified:
   trunk/buildroot/target/Config.in.arch


Changeset:
Modified: trunk/buildroot/target/Config.in.arch
===================================================================
--- trunk/buildroot/target/Config.in.arch	2008-03-11 08:17:17 UTC (rev 21286)
+++ trunk/buildroot/target/Config.in.arch	2008-03-11 08:49:45 UTC (rev 21287)
@@ -476,8 +476,13 @@
 	default "i386"		if BR2_x86_i386
 	default "i486"		if BR2_x86_i486
 	default "i586"		if BR2_x86_i586
+	default "i586"		if BR2_x86_pentium_mmx
 	default "i686"		if BR2_x86_i686
+	default "i686"		if BR2_x86_pentium2
+	default "i686"		if BR2_x86_pentium3
 	default "i686"		if BR2_x86_pentium4
+	default "i686"		if BR2_x86_pentium_m
+	default "i686"		if BR2_x86_pentiumpro
 	default "i686"		if BR2_x86_nocona
 	default "i686"		if BR2_x86_core2
 	default "ia64"		if BR2_ia64

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2008-03-11 19:28 ninevoltz at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: ninevoltz at uclibc.org @ 2008-03-11 19:28 UTC (permalink / raw)
  To: buildroot

Author: ninevoltz
Date: 2008-03-11 12:28:06 -0700 (Tue, 11 Mar 2008)
New Revision: 21307

Log:
removed duplicate config.in reference

Modified:
   trunk/buildroot/target/Config.in


Changeset:
Modified: trunk/buildroot/target/Config.in
===================================================================
--- trunk/buildroot/target/Config.in	2008-03-11 19:13:38 UTC (rev 21306)
+++ trunk/buildroot/target/Config.in	2008-03-11 19:28:06 UTC (rev 21307)
@@ -19,7 +19,6 @@
 source "target/x86/syslinux/Config.in"
 source "target/powerpc/yaboot/Config.in"
 source "target/u-boot/Config.in"
-source "target/device/Atmel/u-boot/Config.in"
 endmenu
 
 menu "Kernel"

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2008-04-04  7:24 jacmet at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: jacmet at uclibc.org @ 2008-04-04  7:24 UTC (permalink / raw)
  To: buildroot

Author: jacmet
Date: 2008-04-04 00:24:15 -0700 (Fri, 04 Apr 2008)
New Revision: 21633

Log:
kernel: default to not build a kernel


Modified:
   trunk/buildroot/target/Config.in


Changeset:
Modified: trunk/buildroot/target/Config.in
===================================================================
--- trunk/buildroot/target/Config.in	2008-04-04 07:17:34 UTC (rev 21632)
+++ trunk/buildroot/target/Config.in	2008-04-04 07:24:15 UTC (rev 21633)
@@ -27,7 +27,7 @@
 choice
 	prompt "Kernel type"
 	default BR2_KERNEL_LINUX_ADVANCED if BR2_TARGET_ATMEL
-	default BR2_KERNEL_LINUX if !BR2_TARGET_ATMEL
+	default BR2_KERNEL_none if !BR2_TARGET_ATMEL
 
 config BR2_KERNEL_none
 	bool "none"

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2008-05-12 12:43 jacmet at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: jacmet at uclibc.org @ 2008-05-12 12:43 UTC (permalink / raw)
  To: buildroot

Author: jacmet
Date: 2008-05-12 05:43:57 -0700 (Mon, 12 May 2008)
New Revision: 21972

Log:
toolchain: fix mips abi selection

Based on commit 0e2ab in aldot's tree.


Modified:
   trunk/buildroot/target/Config.in.arch


Changeset:
Modified: trunk/buildroot/target/Config.in.arch
===================================================================
--- trunk/buildroot/target/Config.in.arch	2008-05-11 06:55:04 UTC (rev 21971)
+++ trunk/buildroot/target/Config.in.arch	2008-05-12 12:43:57 UTC (rev 21972)
@@ -148,6 +148,8 @@
 	bool "mips 32r2"
 config BR2_mips_64
 	bool "mips 64"
+config BR2_mips_64r2
+	bool "mips 64r2"
 config BR2_mips_16
 	bool "mips 16"
 endchoice
@@ -156,16 +158,30 @@
 choice
 	prompt "Target ABI"
 	depends BR2_mips || BR2_mipsel
-	default BR2_MIPS_EABI
+	default BR2_MIPS_OABI32 if BR_mips_32 || BR_mips_32r2
+	default BR2_MIPS_ABI32 if BR_mips_64 || BR_mips_64r2
 	help
 	  Application Binary Interface to use
 
-config BR2_MIPS_OABI
-	bool "OABI"
+config BR2_MIPS_OABI32
+	bool "o32"
+config BR2_MIPS_ABI32
+	bool "n32"
+	depends BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
 config BR2_MIPS_EABI
-	bool "EABI"
+	bool "eabi"
+	depends BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
 config BR2_MIPS_ABI64
-	bool "N64"
+	bool "n64"
+	depends BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
+config BR2_MIPS_OABI64
+	bool "o64"
+	depends BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
+config BR2_MIPS_ABI_none
+	bool "unspecified"
+	depends BR2_mips_16
+	help
+	  Unspecified ABI leaves ABI selection blank.
 endchoice
 
 choice
@@ -594,6 +610,7 @@
 	default mips32		if BR2_mips_32
 	default mips32r2	if BR2_mips_32r2
 	default mips64		if BR2_mips_64
+	default mips64r2	if BR2_mips_64r2
 	default mips16		if BR2_mips_16
 	default 401		if BR2_powerpc_401
 	default 403		if BR2_powerpc_403
@@ -694,11 +711,11 @@
 	default aapcs		if BR2_arm_dunno
 	default aapcs-linux	if BR2_arm_dunno
 	default iwmmxt		if BR2_iwmmxt
-	default 32		if BR2_mipsel && BR2_MIPS_OABI
-	default n32		if BR2_mipsel && BR2_MIPS_EABI
-	default o64		if BR2_mips && BR2_MIPS_OABI
-	default eabi		if BR2_mips && BR2_MIPS_EABI
-	default 64		if BR2_mips && BR2_MIPS_ABI64
+	default 32		if BR2_MIPS_OABI32
+	default n32		if BR2_MIPS_ABI32
+	default eabi		if BR2_MIPS_EABI
+	default o64		if BR2_MIPS_OABI64
+	default n64		if BR2_MIPS_ABI64
 	default mmixware	if BR2_mmix && BR2_MMIX_ABI_native
 	default gnu		if BR2_mmix && !BR2_MMIX_ABI_native
 	default altivec		if BR2_powerpc && BR2_PPC_ABI_altivec

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2008-11-04 19:58 jacmet at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: jacmet at uclibc.org @ 2008-11-04 19:58 UTC (permalink / raw)
  To: buildroot

Author: jacmet
Date: 2008-11-04 11:58:48 -0800 (Tue, 04 Nov 2008)
New Revision: 23924

Log:
Kernel build fix related to external toolchain use

This patch prevents the user from select "linux (Same version as linux
headers)" as a choice for building the kernel when an external binary
toolchain is used, since "same version as linux headers" doesn't make
sense when an external toolchain is used.

It fixes the issue encountered by Hartley <hartleys@visionengravers.com>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Modified:
   trunk/buildroot/target/Config.in


Changeset:
Modified: trunk/buildroot/target/Config.in
===================================================================
--- trunk/buildroot/target/Config.in	2008-11-04 12:50:38 UTC (rev 23923)
+++ trunk/buildroot/target/Config.in	2008-11-04 19:58:48 UTC (rev 23924)
@@ -45,6 +45,11 @@
 	        kernel headers are just that (headers) and not full
 	        kernels. This is a feature.
 
+# The kernel with the same version as linux headers cannot be compiled
+# when using an external toolchain, because the linux headers are not
+# handled by Buildroot in this case.
+if BR2_TOOLCHAIN_SOURCE
+
 config BR2_KERNEL_LINUX
 	bool "linux (Same version as linux headers)"
 	select BR2_PACKAGE_LINUX
@@ -56,6 +61,8 @@
 	        kernel headers are just that (headers) and not full
 	        kernels. This is a feature.
 
+endif
+
 config BR2_KERNEL_HURD
 	bool "hurd"
 	help

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2008-12-17  9:28 ulf at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: ulf at uclibc.org @ 2008-12-17  9:28 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2008-12-17 01:28:33 -0800 (Wed, 17 Dec 2008)
New Revision: 24437

Log:
Remove AVR32 target variants, the current entries refers to CHIPS which have the same CPU core, CHIP variant is defined elsewhere

Modified:
   trunk/buildroot/target/Config.in.arch


Changeset:
Modified: trunk/buildroot/target/Config.in.arch
===================================================================
--- trunk/buildroot/target/Config.in.arch	2008-12-17 06:32:19 UTC (rev 24436)
+++ trunk/buildroot/target/Config.in.arch	2008-12-17 09:28:33 UTC (rev 24437)
@@ -186,18 +186,6 @@
 
 choice
 	prompt "Target Architecture Variant"
-	depends on BR2_avr32
-config BR2_at32ap7000
-	bool "AT32AP7000"
-config BR2_at32ap7001
-	bool "AT32AP7001"
-config BR2_at32ap7002
-	bool "AT32AP7002"
-endchoice
-
-
-choice
-	prompt "Target Architecture Variant"
 	depends on BR2_sh
 	default BR2_sh4
 	help

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2009-01-01 17:48 nkukard at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: nkukard at uclibc.org @ 2009-01-01 17:48 UTC (permalink / raw)
  To: buildroot

Author: nkukard
Date: 2009-01-01 17:48:06 +0000 (Thu, 01 Jan 2009)
New Revision: 24636

Log:
* Added "generic" option to x86_64 target
- Default to generic and not core2


Modified:
   trunk/buildroot/target/Config.in.arch


Changeset:
Modified: trunk/buildroot/target/Config.in.arch
===================================================================
--- trunk/buildroot/target/Config.in.arch	2009-01-01 17:28:51 UTC (rev 24635)
+++ trunk/buildroot/target/Config.in.arch	2009-01-01 17:48:06 UTC (rev 24636)
@@ -269,10 +269,12 @@
 choice
 	prompt "Target Architecture Variant"
 	depends on BR2_x86_64
-	default BR2_x86_64_core2
+	default BR2_x86_64_generic
 	help
 	  Specific CPU variant to use
 
+config BR2_x86_64_generic
+	bool "generic"
 config BR2_x86_64_barcelona
 	bool "barcelona"
 config BR2_x86_64_opteron_sse3
@@ -507,6 +509,7 @@
 	default "sparc"		if BR2_sparc
 	default "sparc64"	if BR2_sparc64
 	default "x86_64"	if BR2_x86_64
+	default "x86_64"	if BR2_x86_64_generic
 	default "x86_64"	if BR2_x86_64_nocona
 	default "x86_64"	if BR2_x86_64_core2
 	default "x86_64"	if BR2_x86_64_opteron
@@ -549,6 +552,7 @@
 	default winchip2	if BR2_x86_winchip2
 	default c3		if BR2_x86_c3
 	default geode		if BR2_x86_geode
+	default generic		if BR2_x86_64_generic
 	default nocona		if BR2_x86_64_nocona
 	default core2		if BR2_x86_64_core2
 	default k8		if BR2_x86_64_opteron

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2009-01-12 20:58 jacmet at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: jacmet at uclibc.org @ 2009-01-12 20:58 UTC (permalink / raw)
  To: buildroot

Author: jacmet
Date: 2009-01-12 20:58:54 +0000 (Mon, 12 Jan 2009)
New Revision: 24806

Log:
buildroot: mark ia64, m68k, nios2, sparc and sparc64 as broken

No sense in showing the architecture options when they cannot even build
the toolchain.

Modified:
   trunk/buildroot/target/Config.in.arch


Changeset:
Modified: trunk/buildroot/target/Config.in.arch
===================================================================
--- trunk/buildroot/target/Config.in.arch	2009-01-12 20:16:16 UTC (rev 24805)
+++ trunk/buildroot/target/Config.in.arch	2009-01-12 20:58:54 UTC (rev 24806)
@@ -13,21 +13,23 @@
 config BR2_avr32
 	bool "avr32"
 	select BR2_SOFT_FLOAT
-
 config BR2_cris
 	bool "cris"
 config BR2_ia64
 	bool "ia64"
+	depends on BROKEN # uclibc linker errors
 config BR2_i386
 	bool "i386"
 config BR2_m68k
 	bool "m68k"
+	depends on BROKEN # ice in uclibc / inet_ntoa_r
 config BR2_mips
 	bool "mips"
 config BR2_mipsel
 	bool "mipsel"
 config BR2_nios2
 	bool "nios2"
+	depends on BROKEN # no kernel headers
 config BR2_powerpc
 	bool "powerpc"
 config BR2_sh
@@ -36,8 +38,10 @@
 	bool "superh64"
 config BR2_sparc
 	bool "sparc"
+	depends on BROKEN # uclibc linker errors
 config BR2_sparc64
 	bool "sparc64"
+	depends on BROKEN # uclibc libm linker errors
 config BR2_x86_64
 	bool "x86_64"
 endchoice

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2009-01-13 15:14 jacmet at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: jacmet at uclibc.org @ 2009-01-13 15:14 UTC (permalink / raw)
  To: buildroot

Author: jacmet
Date: 2009-01-13 15:14:21 +0000 (Tue, 13 Jan 2009)
New Revision: 24815

Log:
buildroot: mark alpha as broken

It still doesn't build with threading + shared libs disabled

Modified:
   trunk/buildroot/target/Config.in.arch


Changeset:
Modified: trunk/buildroot/target/Config.in.arch
===================================================================
--- trunk/buildroot/target/Config.in.arch	2009-01-13 15:09:18 UTC (rev 24814)
+++ trunk/buildroot/target/Config.in.arch	2009-01-13 15:14:21 UTC (rev 24815)
@@ -6,6 +6,7 @@
 
 config BR2_alpha
 	bool "alpha"
+	depends on BROKEN # no threads, shared libs, gcc psignal compile errors
 config BR2_arm
 	bool "arm"
 config BR2_armeb

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target
@ 2009-01-30 11:35 jacmet at uclibc.org
  0 siblings, 0 replies; 24+ messages in thread
From: jacmet at uclibc.org @ 2009-01-30 11:35 UTC (permalink / raw)
  To: buildroot

Author: jacmet
Date: 2009-01-30 11:35:04 +0000 (Fri, 30 Jan 2009)
New Revision: 25164

Log:
target/Config.in.arch: fix ARM abi setting

Reported by Sven Neumann and based on 7f7aac5d3 in Bernhard's tree.

Modified:
   trunk/buildroot/target/Config.in.arch


Changeset:
Modified: trunk/buildroot/target/Config.in.arch
===================================================================
--- trunk/buildroot/target/Config.in.arch	2009-01-30 11:30:21 UTC (rev 25163)
+++ trunk/buildroot/target/Config.in.arch	2009-01-30 11:35:04 UTC (rev 25164)
@@ -670,11 +670,10 @@
 
 config BR2_GCC_TARGET_ABI
 	string
-	default apcs-gnu	if BR2_arm_dunno
+	default apcs-gnu	if BR2_ARM_OABI
 	default atpcs		if BR2_arm_dunno
 	default aapcs		if BR2_arm_dunno
-	default aapcs-linux	if BR2_arm_dunno
-	default iwmmxt		if BR2_iwmmxt
+	default aapcs-linux	if BR2_ARM_EABI
 	default 32		if BR2_MIPS_OABI32
 	default n32		if BR2_MIPS_ABI32
 	default eabi		if BR2_MIPS_EABI

^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, other threads:[~2009-01-30 11:35 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-04 16:30 [Buildroot] svn commit: trunk/buildroot/target aldot at uclibc.org
  -- strict thread matches above, loose matches on Subject: below --
2009-01-30 11:35 jacmet at uclibc.org
2009-01-13 15:14 jacmet at uclibc.org
2009-01-12 20:58 jacmet at uclibc.org
2009-01-01 17:48 nkukard at uclibc.org
2008-12-17  9:28 ulf at uclibc.org
2008-11-04 19:58 jacmet at uclibc.org
2008-05-12 12:43 jacmet at uclibc.org
2008-04-04  7:24 jacmet at uclibc.org
2008-03-11 19:28 ninevoltz at uclibc.org
2008-03-11  8:49 jacmet at uclibc.org
2008-03-06 19:00 ninevoltz at uclibc.org
2007-10-05 11:03 aldot at uclibc.org
2007-09-30 12:42 aldot at uclibc.org
2007-09-29 19:47 aldot at uclibc.org
2007-09-23 22:08 ulf at uclibc.org
2007-07-20 12:03 ulf at uclibc.org
2007-07-08 19:23 aldot at uclibc.org
2007-06-26 16:36 aldot at uclibc.org
2007-06-06 19:59 aldot at uclibc.org
2007-04-17 17:30 aldot at uclibc.org
2007-03-22 18:14 aldot at uclibc.org
2007-03-19 10:49 aldot at uclibc.org
2007-01-30 17:38 aldot at uclibc.org

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox