* [Buildroot] build fails with current uclibc
@ 2007-06-28 18:26 Ivan Kuten
2007-06-28 22:31 ` Bernhard Fischer
0 siblings, 1 reply; 5+ messages in thread
From: Ivan Kuten @ 2007-06-28 18:26 UTC (permalink / raw)
To: buildroot
Hello,
Current buildroot fails with configuration:
BR2_arm=y
BR2_arm920t=y
BR2_ARM_TYPE="ARM920T"
BR2_ARM_OABI=y
BR2_KERNEL_HEADERS_2_6_21=y
BR2_DEFAULT_KERNEL_HEADERS="2.6.21.5"
BR2_UCLIBC_VERSION_SNAPSHOT=y
BR2_USE_UCLIBC_SNAPSHOT="snapshot"
BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.29.config"
BR2_PTHREADS_OLD=y
BR2_GCC_VERSION="3.4.6"
make[1]: Entering directory `buildroot/toolchain_build_arm/uClibc'
../libc/misc/wchar/wchar.c:170: error: syntax error before "attribute_hidden"
../libc/misc/wchar/wchar.c:170: warning: data definition has no type or storage class
../libc/misc/wchar/wchar.c:173: error: syntax error before "attribute_hidden"
../libc/misc/wchar/wchar.c:173: warning: data definition has no type or storage class
make[2]: *** [../utils/iconv] Error 1
make[1]: *** [utils] ?????? 2
BR,
Ivan
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] build fails with current uclibc
2007-06-28 18:26 [Buildroot] build fails with current uclibc Ivan Kuten
@ 2007-06-28 22:31 ` Bernhard Fischer
2007-06-29 8:21 ` softa at ttechgroup.com
0 siblings, 1 reply; 5+ messages in thread
From: Bernhard Fischer @ 2007-06-28 22:31 UTC (permalink / raw)
To: buildroot
On Thu, Jun 28, 2007 at 09:26:34PM +0300, Ivan Kuten wrote:
>
>Hello,
>
>Current buildroot fails with configuration:
*phew* glad i usually turn off locale as well as wchar support.
Glad that I have a pending workaround for m4 being b0rked with
wchar off, fwiw ;)
>
>BR2_arm=y
>BR2_arm920t=y
>BR2_ARM_TYPE="ARM920T"
>BR2_ARM_OABI=y
>BR2_KERNEL_HEADERS_2_6_21=y
>BR2_DEFAULT_KERNEL_HEADERS="2.6.21.5"
>BR2_UCLIBC_VERSION_SNAPSHOT=y
>BR2_USE_UCLIBC_SNAPSHOT="snapshot"
>BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.29.config"
>BR2_PTHREADS_OLD=y
>BR2_GCC_VERSION="3.4.6"
>
>make[1]: Entering directory `buildroot/toolchain_build_arm/uClibc'
>../libc/misc/wchar/wchar.c:170: error: syntax error before "attribute_hidden"
>../libc/misc/wchar/wchar.c:170: warning: data definition has no type or storage class
>../libc/misc/wchar/wchar.c:173: error: syntax error before "attribute_hidden"
>../libc/misc/wchar/wchar.c:173: warning: data definition has no type or storage class
>make[2]: *** [../utils/iconv] Error 1
>make[1]: *** [utils] ?????? 2
PS: I'll spare to make any mention of wchar support which is
time-consuming as well as multilib support which falls into the same
category. IMHO these two are exactly of those kinds where interrested
parties should get in touch privately unless they want to sink their own
time and money to provide a satisfactory correct solution, generally..
Put short, ask the uClibc folks about this
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] build fails with current uclibc
2007-06-28 22:31 ` Bernhard Fischer
@ 2007-06-29 8:21 ` softa at ttechgroup.com
2007-06-29 9:25 ` Ivan Kuten
0 siblings, 1 reply; 5+ messages in thread
From: softa at ttechgroup.com @ 2007-06-29 8:21 UTC (permalink / raw)
To: buildroot
Hi,
The problem is in *iconv* binary for target, wchar support seems to be ok.
For successful compilation, remove iconv from makefile. I spend 1 day
digging in this problem and finaly decide to disable iconv in the target
platform.
Attached is patch that must be copied into buildroot/toolchain/uClibc/ dir.
BR,
Assen Stoyanov
----- Original Message -----
From: "Bernhard Fischer" <rep.dot.nop@gmail.com>
To: "Ivan Kuten" <ivan.kuten@promwad.com>
Cc: <buildroot@uclibc.org>
Sent: Friday, June 29, 2007 1:31 AM
Subject: Re: [Buildroot] build fails with current uclibc
> On Thu, Jun 28, 2007 at 09:26:34PM +0300, Ivan Kuten wrote:
>>
>>Hello,
>>
>>Current buildroot fails with configuration:
>
> *phew* glad i usually turn off locale as well as wchar support.
> Glad that I have a pending workaround for m4 being b0rked with
> wchar off, fwiw ;)
>>
>>BR2_arm=y
>>BR2_arm920t=y
>>BR2_ARM_TYPE="ARM920T"
>>BR2_ARM_OABI=y
>>BR2_KERNEL_HEADERS_2_6_21=y
>>BR2_DEFAULT_KERNEL_HEADERS="2.6.21.5"
>>BR2_UCLIBC_VERSION_SNAPSHOT=y
>>BR2_USE_UCLIBC_SNAPSHOT="snapshot"
>>BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.29.config"
>>BR2_PTHREADS_OLD=y
>>BR2_GCC_VERSION="3.4.6"
>>
>>make[1]: Entering directory `buildroot/toolchain_build_arm/uClibc'
>>../libc/misc/wchar/wchar.c:170: error: syntax error before
>>"attribute_hidden"
>>../libc/misc/wchar/wchar.c:170: warning: data definition has no type or
>>storage class
>>../libc/misc/wchar/wchar.c:173: error: syntax error before
>>"attribute_hidden"
>>../libc/misc/wchar/wchar.c:173: warning: data definition has no type or
>>storage class
>>make[2]: *** [../utils/iconv] Error 1
>>make[1]: *** [utils] ?????? 2
>
> PS: I'll spare to make any mention of wchar support which is
> time-consuming as well as multilib support which falls into the same
> category. IMHO these two are exactly of those kinds where interrested
> parties should get in touch privately unless they want to sink their own
> time and money to provide a satisfactory correct solution, generally..
>
> Put short, ask the uClibc folks about this
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
-------------- next part --------------
A non-text attachment was scrubbed...
Name: uClibc-0.9.29-disable-broken-iconv-target.patch
Type: application/octet-stream
Size: 791 bytes
Desc: not available
Url : http://busybox.net/lists/buildroot/attachments/20070629/d0959978/attachment.obj
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] build fails with current uclibc
2007-06-29 8:21 ` softa at ttechgroup.com
@ 2007-06-29 9:25 ` Ivan Kuten
2007-06-29 14:28 ` Ivan Kuten
0 siblings, 1 reply; 5+ messages in thread
From: Ivan Kuten @ 2007-06-29 9:25 UTC (permalink / raw)
To: buildroot
On Fri, 29 Jun 2007 11:21:30 +0300
softa at ttechgroup.com wrote:
> >>
> >>BR2_arm=y
> >>BR2_arm920t=y
> >>BR2_ARM_TYPE="ARM920T"
> >>BR2_ARM_OABI=y
> >>BR2_KERNEL_HEADERS_2_6_21=y
> >>BR2_DEFAULT_KERNEL_HEADERS="2.6.21.5"
> >>BR2_UCLIBC_VERSION_SNAPSHOT=y
> >>BR2_USE_UCLIBC_SNAPSHOT="snapshot"
> >>BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.29.config"
> >>BR2_PTHREADS_OLD=y
> >>BR2_GCC_VERSION="3.4.6"
> >>
> >>make[1]: Entering directory `buildroot/toolchain_build_arm/uClibc'
> >>../libc/misc/wchar/wchar.c:170: error: syntax error before
> >>"attribute_hidden"
> >>../libc/misc/wchar/wchar.c:170: warning: data definition has no type or
> >>storage class
> >>../libc/misc/wchar/wchar.c:173: error: syntax error before
> >>"attribute_hidden"
> >>../libc/misc/wchar/wchar.c:173: warning: data definition has no type or
> >>storage class
> >>make[2]: *** [../utils/iconv] Error 1
> >>make[1]: *** [utils] ?????? 2
> >
Wchar and locale uCLibc build is correct - i just enabled wchar&locale in uclibc config
but not in BR2_ENABLE_LOCALE. Sorry for confusion.
BR,
Ivan
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] build fails with current uclibc
2007-06-29 9:25 ` Ivan Kuten
@ 2007-06-29 14:28 ` Ivan Kuten
0 siblings, 0 replies; 5+ messages in thread
From: Ivan Kuten @ 2007-06-29 14:28 UTC (permalink / raw)
To: buildroot
On Fri, 29 Jun 2007 12:25:56 +0300
Ivan Kuten wrote:
> > >
>
> Wchar and locale uCLibc build is correct - i just enabled wchar&locale in uclibc config
> but not in BR2_ENABLE_LOCALE. Sorry for confusion.
>
>Hi,
>
>The problem is in *iconv* binary for target, wchar support seems to be ok.
>For successful compilation, remove iconv from makefile. I spend 1 day
>digging in this problem and finaly decide to disable iconv in the target
>platform.
>Attached is patch that must be copied into buildroot/toolchain/uClibc/ dir.
>BR,
>Assen Stoyanov
Again, I messed with ucLibc install - if doing from clean install build root this problem appears
and indeed Assen's patch fixes behaviour.
However doing make from uclibc dir and uclibc .config I can make compile successfully - so it's more buildroot issue that of uclibc.
BR, Ivan
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-06-29 14:28 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-28 18:26 [Buildroot] build fails with current uclibc Ivan Kuten
2007-06-28 22:31 ` Bernhard Fischer
2007-06-29 8:21 ` softa at ttechgroup.com
2007-06-29 9:25 ` Ivan Kuten
2007-06-29 14:28 ` Ivan Kuten
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox