[Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap

Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2007-07-29  7:09 ulf at uclibc.org
  0 siblings, 0 replies; 14+ messages in thread
From: ulf at uclibc.org @ 2007-07-29  7:09 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2007-07-29 00:09:57 -0700 (Sun, 29 Jul 2007)
New Revision: 19314

Log:
Reintroduce ATMEL_MIRROR in at91bootstrap

Modified:
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk


Changeset:
Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2007-07-29 07:06:05 UTC (rev 19313)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2007-07-29 07:09:57 UTC (rev 19314)
@@ -5,6 +5,8 @@
 #############################################################
 AT91BOOTSTRAP_VERSION:=2.3
 AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
+ATMEL_MIRROR:=$(strip  $(subst ",, $(BR2_ATMEL_MIRROR)))
+#"))
 AT91BOOTSTRAP_SITE:=$(ATMEL_MIRROR)/Source
 AT91BOOTSTRAP_SOURCE:=$(AT91BOOTSTRAP_NAME).tar.bz2
 AT91BOOTSTRAP_DIR:=$(PROJECT_BUILD_DIR)/$(AT91BOOTSTRAP_NAME)

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2007-08-15  9:42 ulf at uclibc.org
  0 siblings, 0 replies; 14+ messages in thread
From: ulf at uclibc.org @ 2007-08-15  9:42 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2007-08-15 02:42:33 -0700 (Wed, 15 Aug 2007)
New Revision: 19512

Log:
Add programmable start adr/size to at91bootstrap + support for at91sam9260pf

Added:
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.1.patch
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch

Modified:
   trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk


Changeset:
Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in	2007-08-15 09:40:59 UTC (rev 19511)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in	2007-08-15 09:42:33 UTC (rev 19512)
@@ -1,5 +1,5 @@
 config BR2_TARGET_AT91BOOTSTRAP
-	depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9260DFC || \
+	depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9260DFC || BR2_TARGET_AT91SAM9260PF || \
 	BR2_TARGET_AT91SAM9261EK || BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9XEEK
 	bool "Build AT91 Bootstrap for selected chip"
 
@@ -26,8 +26,8 @@
 	bool "NAND Flash"
 
 config BR2_TARGET_AT91BOOT_FLASH
-        depends on BR2_TARGET_AT91SAM9XEEK
-	bool "Internal Flash"
+        depends on BR2_TARGET_AT91SAM9XEEK || BR2_TARGET_AT91SAM9260PF
+	bool "Internal Flash or external parallel flash"
 
 endchoice
 
@@ -37,3 +37,47 @@
 	default	"dataflashcard"	if	BR2_TARGET_AT91BOOT_DATAFLASHCARD
 	default	"nandflash"	if	BR2_TARGET_AT91BOOT_NANDFLASH
 	default	"flash"		if	BR2_TARGET_AT91BOOT_FLASH
+
+config	BR2_AT91BOOTSTRAP_IMG_SIZE
+	string	"Image Size to copy to SDRAM"
+	default	"0x32000"	if	BR2_TARGET_AT91BOOT_DATAFLASH || BR2_TARGET_AT91BOOT_DATAFLASHCARD
+	default	"0x30000"	if	BR2_TARGET_AT91BOOT_NANDFLASH
+	default	"0x100000"	if	BR2_TARGET_AT91BOOT_FLASH
+	depends BR2_TARGET_AT91BOOTSTRAP
+	help
+	  Select the size of your application
+	  AT91 Bootstrap will copy this amount from flash to SDRAM
+
+choice	
+	prompt "Start address of application"
+	default BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
+	depends on BR2_TARGET_AT91BOOTSTRAP
+	help
+	  Select Chip for which AT91 bootstrap should be built
+	  Currently supports AT91SAM9260EK, AT91SAM9261EK, AT91SAM9XEEK, AT91SAM9263EK
+
+config	BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
+	bool "Copy to the default U-Boot start location in the SDRAM"
+	help
+	  This is where you copy the U-Boot boot loader
+
+config	BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM
+	bool "Copy to the last Megabyte of the SDRAM"
+	help
+	  This is where you copy a boot loader
+
+config	BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM
+	bool "Copy to the start of the SDRAM"
+	help
+	  This is where you copy a standalone application
+endchoice
+
+config	BR2_AT91BOOTSTRAP_JUMP_ADDR
+	string
+	default	"0x23F00000" if BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
+	default	"0x23F00000" if BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM	
+	default "0x20000000" if BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM
+	depends on BR2_TARGET_AT91BOOTSTRAP
+
+comment "It will be copied to $(BR2_AT91BOOTSTRAP_JUMP_ADDR)"
+

Added: trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.1.patch
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.1.patch	                        (rev 0)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.1.patch	2007-08-15 09:42:33 UTC (rev 19512)
@@ -0,0 +1,223 @@
+diff -urN at91bootstrap-2.3/board/at91sam9260ek/dataflash/at91sam9260ek.h at91bootstrap-2.3.1/board/at91sam9260ek/dataflash/at91sam9260ek.h
+--- at91bootstrap-2.3/board/at91sam9260ek/dataflash/at91sam9260ek.h	2007-04-22 13:42:03.000000000 +0200
++++ at91bootstrap-2.3.1/board/at91sam9260ek/dataflash/at91sam9260ek.h	2007-08-14 15:33:06.000000000 +0200
+@@ -74,12 +74,21 @@
+ /* BootStrap Settings                                                  */
+ /*                                                                     */
+ /* ******************************************************************* */
++#define MACH_TYPE       	0x44B		/* AT91SAM9260-EK */
+ 
+-#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x30000			/* Image Size in DataFlash    */
++#define IMG_ADDRESS 		0x8400		/* Image Address in DataFlash */
+ 
+-#define MACH_TYPE       	0x44B       		/* AT91SAM9260-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#if	defined(IMG_SIZE)
++#warning			"IMG_SIZE redefined"
++#else
++#define	IMG_SIZE		0x32000		/* Image Size in DataFlash    */
++#endif
++
++#if	defined(JUMP_ADDR)
++#warning			"JUMP_ADDR redefined"
++#else
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#endif
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff -urN at91bootstrap-2.3/board/at91sam9260ek/dataflashcard/at91sam9260ek.h at91bootstrap-2.3.1/board/at91sam9260ek/dataflashcard/at91sam9260ek.h
+--- at91bootstrap-2.3/board/at91sam9260ek/dataflashcard/at91sam9260ek.h	2007-04-22 13:42:15.000000000 +0200
++++ at91bootstrap-2.3.1/board/at91sam9260ek/dataflashcard/at91sam9260ek.h	2007-08-14 15:31:04.000000000 +0200
+@@ -74,12 +74,21 @@
+ /* BootStrap Settings                                                  */
+ /*                                                                     */
+ /* ******************************************************************* */
++#define MACH_TYPE       	0x44B		/* AT91SAM9260-EK */
+ 
+-#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x30000			/* Image Size in DataFlash    */
++#define IMG_ADDRESS 		0x8400		/* Image Address in DataFlash */
+ 
+-#define MACH_TYPE       	0x44B       		/* AT91SAM9260-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#if	defined(IMG_SIZE)
++#warning			"IMG_SIZE redefined"
++#else
++#define	IMG_SIZE		0x32000		/* Image Size in DataFlash    */
++#endif
++
++#if	defined(JUMP_ADDR)
++#warning			"JUMP_ADDR redefined"
++#else
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#endif
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff -urN at91bootstrap-2.3/board/at91sam9260ek/nandflash/at91sam9260ek.h at91bootstrap-2.3.1/board/at91sam9260ek/nandflash/at91sam9260ek.h
+--- at91bootstrap-2.3/board/at91sam9260ek/nandflash/at91sam9260ek.h	2007-04-22 13:54:38.000000000 +0200
++++ at91bootstrap-2.3.1/board/at91sam9260ek/nandflash/at91sam9260ek.h	2007-08-14 15:28:19.000000000 +0200
+@@ -116,11 +116,21 @@
+ /* BootStrap Settings                                                  */
+ /*                                                                     */
+ /* ******************************************************************* */
++#define MACH_TYPE      		0x44B       	/* AT91SAM9260-EK */
++
+ #define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
++
++#if	defined(IMG_SIZE)
++#warning			"IMG_SIZE redefined"
++#else
+ #define	IMG_SIZE		0x30000		/* Image Size in NandFlash    */
++#endif
+ 
+-#define MACH_TYPE       0x44B       /* AT91SAM9260-EK */
++#if	defined(JUMP_ADDR)
++#warning			"JUMP_ADDR redefined"
++#else
+ #define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#endif
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff -urN at91bootstrap-2.3/board/at91sam9261ek/dataflash/at91sam9261ek.h at91bootstrap-2.3.1/board/at91sam9261ek/dataflash/at91sam9261ek.h
+--- at91bootstrap-2.3/board/at91sam9261ek/dataflash/at91sam9261ek.h	2007-04-22 13:54:21.000000000 +0200
++++ at91bootstrap-2.3.1/board/at91sam9261ek/dataflash/at91sam9261ek.h	2007-08-14 15:29:35.000000000 +0200
+@@ -94,12 +94,21 @@
+ /* BootStrap Settings                                                  */
+ /*                                                                     */
+ /* ******************************************************************* */
++#define MACH_TYPE       	0x350		/* AT91SAM9261-EK */
+ 
+-#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x32000			/* Image Size in DataFlash    */
++#define IMG_ADDRESS 		0x8400		/* Image Address in DataFlash */
+ 
+-#define MACH_TYPE       0x350       /* AT91SAM9261-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#if	defined(IMG_SIZE)
++#warning			"IMG_SIZE redefined"
++#else
++#define	IMG_SIZE		0x32000		/* Image Size in DataFlash    */
++#endif
++
++#if	defined(JUMP_ADDR)
++#warning			"JUMP_ADDR redefined"
++#else
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#endif
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff -urN at91bootstrap-2.3/board/at91sam9261ek/nandflash/at91sam9261ek.h at91bootstrap-2.3.1/board/at91sam9261ek/nandflash/at91sam9261ek.h
+--- at91bootstrap-2.3/board/at91sam9261ek/nandflash/at91sam9261ek.h	2007-04-22 13:54:09.000000000 +0200
++++ at91bootstrap-2.3.1/board/at91sam9261ek/nandflash/at91sam9261ek.h	2007-08-14 15:26:21.000000000 +0200
+@@ -137,11 +137,21 @@
+ /* BootStrap Settings                                                  */
+ /*                                                                     */
+ /* ******************************************************************* */
++#define MACH_TYPE       	0x350       	/* AT91SAM9261-EK */
++
+ #define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
++
++#if	defined(IMG_SIZE)
++#warning			"IMG_SIZE redefined"
++#else
+ #define	IMG_SIZE		0x30000		/* Image Size in NandFlash    */
++#endif
+ 
+-#define MACH_TYPE       	0x350       	/* AT91SAM9261-EK */
++#if	defined(JUMP_ADDR)
++#warning			"JUMP_ADDR redefined"
++#else
+ #define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#endif
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff -urN at91bootstrap-2.3/board/at91sam9263ek/dataflash/at91sam9263ek.h at91bootstrap-2.3.1/board/at91sam9263ek/dataflash/at91sam9263ek.h
+--- at91bootstrap-2.3/board/at91sam9263ek/dataflash/at91sam9263ek.h	2007-04-22 13:53:52.000000000 +0200
++++ at91bootstrap-2.3.1/board/at91sam9263ek/dataflash/at91sam9263ek.h	2007-08-14 15:29:05.000000000 +0200
+@@ -94,12 +94,21 @@
+ /* BootStrap Settings                                                  */
+ /*                                                                     */
+ /* ******************************************************************* */
++#define MACH_TYPE       	0x4B2       	/* AT91SAM9263-EK */
+ 
+-#define IMG_ADDRESS 			0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE			0x32000			/* Image Size in DataFlash    */
++#define IMG_ADDRESS 		0x8400		/* Image Address in DataFlash */
+ 
+-#define MACH_TYPE       		0x4B2       		/* AT91SAM9263-EK */
+-#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
++#if	defined(IMG_SIZE)
++#warning			"IMG_SIZE redefined"
++#else
++#define	IMG_SIZE		0x32000		/* Image Size in DataFlash    */
++#endif
++
++#if	defined(JUMP_ADDR)
++#warning			"JUMP_ADDR redefined"
++#else
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#endif
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff -urN at91bootstrap-2.3/Makefile at91bootstrap-2.3.1/Makefile
+--- at91bootstrap-2.3/Makefile	2007-04-22 13:47:48.000000000 +0200
++++ at91bootstrap-2.3.1/Makefile	2007-08-14 16:14:14.000000000 +0200
+@@ -8,7 +8,7 @@
+ 
+ TOPDIR	:=	$(CURDIR)
+ 
+-VERSION:=2.3
++VERSION:=2.3.1
+ 
+ include	.config
+ 
+@@ -63,7 +63,8 @@
+ CPPFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET)		\
+ 	-I$(INCL) -Iinclude				\
+ 	-DTOP_OF_MEM=$(TOP_OF_MEMORY) 			\
+-	-D$(SPI_MODE) -D$(SPI_BOOT) -DSPI_CLK=$(SPI_CLK)
++	-D$(SPI_MODE) -D$(SPI_BOOT) -DSPI_CLK=$(SPI_CLK) \
++	$(AT91_CUSTOM_FLAGS)
+ 
+ ASFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -Iinclude -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+@@ -141,9 +142,6 @@
+ toolchain:	../buildroot/.config
+ 	make -C ../buildroot
+ 
+-tarball:
+-	./tarball.sh
+-
+ #	echo $PCK 1  $(PCK) 2  ${PCK} 3 $$PCK 4  $$(PCK) 5  $${PCK}  )
+ 	
+ #	cd .. ; tar -cvf `basename $$(TOPDIR)`.tar `basename $$(TOPDIR)` ; bzip2 `basename $$(TOPDIR)`.tar )
+@@ -177,4 +175,4 @@
+ 	tar --force-local -cvf $$F.tar $$F; \
+ 	rm -f $$F.tar.bz2 ; \
+ 	bzip2 $$F.tar ; \
+-	mv -f $$F.tar.bz2 /usr/local/install/downloads
++	cp -f $$F.tar.bz2 /usr/local/install/downloads
+diff -urN at91bootstrap-2.3/tarball.sh at91bootstrap-2.3.1/tarball.sh
+--- at91bootstrap-2.3/tarball.sh	2007-03-25 17:09:37.000000000 +0200
++++ at91bootstrap-2.3.1/tarball.sh	1970-01-01 01:00:00.000000000 +0100
+@@ -1,13 +0,0 @@
+-#!/bin/bash
+-TOPDIR=`pwd`
+-DATE=`date +%F`
+-PACKAGE=`basename ${TOPDIR}`
+-TARBALL=${PACKAGE}-${DATE}
+-
+-
+-make clean
+-cd ..
+-tar -cvf ${PACKAGE}.tar ${PACKAGE}
+-mv	${PACKAGE}.tar	${TARBALL}.tar
+-rm -f  ${TARBALL}.tar.bz2
+-bzip2 ${TARBALL}.tar

Added: trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch	                        (rev 0)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch	2007-08-15 09:42:33 UTC (rev 19512)
@@ -0,0 +1,506 @@
+diff -urN at91bootstrap-2.3/board/at91sam9260ek/at91sam9260ek.c at91bootstrap-2.3.2/board/at91sam9260ek/at91sam9260ek.c
+--- at91bootstrap-2.3/board/at91sam9260ek/at91sam9260ek.c	2007-03-28 16:05:09.000000000 +0200
++++ at91bootstrap-2.3.2/board/at91sam9260ek/at91sam9260ek.c	2007-08-14 23:20:24.000000000 +0200
+@@ -47,7 +47,9 @@
+ #ifdef CFG_DATAFLASH
+ #include "../../include/dataflash.h"
+ #endif
+-
++#ifdef CFG_FLASH
++#include "../../include/flash.h"
++#endif
+ static inline unsigned int get_cp15(void)
+ {
+ 	unsigned int value;
+@@ -129,6 +131,10 @@
+ 				(MASTER_CLOCK * 7)/1000000);	/* Refresh Timer Register */
+ 
+ #endif /* CFG_SDRAM */
++
++#ifdef	CFG_FLASH
++	flash_hw_init();
++#endif
+ }
+ #endif /* CFG_HW_INIT */
+ 
+@@ -221,7 +227,24 @@
+ }
+ #endif /* CFG_DATAFLASH */
+ 
++#ifdef CFG_FLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    flash_hw_init								*/
++/* \brief This function performs Flash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void flash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc flash_pio[] = {
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(flash_pio);
++}
+ 
++#endif /* CFG_FLASH */
+ 
+ #ifdef CFG_NANDFLASH
+ /*------------------------------------------------------------------------------*/
+diff -urN at91bootstrap-2.3/board/at91sam9260ek/flash/at91sam9260ek.h at91bootstrap-2.3.2/board/at91sam9260ek/flash/at91sam9260ek.h
+--- at91bootstrap-2.3/board/at91sam9260ek/flash/at91sam9260ek.h	1970-01-01 01:00:00.000000000 +0100
++++ at91bootstrap-2.3.2/board/at91sam9260ek/flash/at91sam9260ek.h	2007-08-14 22:53:58.000000000 +0200
+@@ -0,0 +1,88 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * - Redistributions in binary form must reproduce the above copyright notice,
++ * this list of conditions and the disclaimer below in the documentation and/or
++ * other materials provided with the distribution.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : at91sam9260ek.h
++ * Object              :
++ * Creation            : NLe Jul 13th 2006
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _AT91SAM9260EK_H
++#define _AT91SAM9260EK_H
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(198656000/2)
++
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x2060BF09
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++
++/* Flash settings - Use a default, which hopefully works for all AT91 chips */
++#include	"smc0_setup.h"
++
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define MACH_TYPE       	0x44B		/* AT91SAM9260-EK */
++
++#define IMG_ADDRESS 		0x8000		/* Image Address in Flash */
++
++#if	defined(IMG_SIZE)
++#warning			"IMG_SIZE redefined"
++#else
++#define	IMG_SIZE		0x38000		/* Image Size in Flash    */
++#endif
++
++#if	defined(JUMP_ADDR)
++#warning			"JUMP_ADDR redefined"
++#else
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#endif
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#define CFG_DEBUG
++#define CFG_FLASH
++#define	CFG_SDRAM
++#define	CFG_HW_INIT
++
++#endif	/* _AT91SAM9260EK_H */
+diff -urN at91bootstrap-2.3/crt0_gnu.S at91bootstrap-2.3.2/crt0_gnu.S
+--- at91bootstrap-2.3/crt0_gnu.S	2006-12-05 11:27:24.000000000 +0100
++++ at91bootstrap-2.3.2/crt0_gnu.S	2007-08-14 23:23:49.000000000 +0200
+@@ -84,6 +84,13 @@
+ _init_stack:
+ 	ldr     sp,=TOP_OF_MEM
+ 
++/* Initialize the SMC BEFORE we change the clock */
++#ifdef	CFG_FLASH
++	ldr     r4, = smc0_hw_init
++	mov     lr, pc
++	bx      r4
++#endif
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff -urN at91bootstrap-2.3/driver/driver.mk at91bootstrap-2.3.2/driver/driver.mk
+--- at91bootstrap-2.3/driver/driver.mk	2007-03-25 16:24:08.000000000 +0200
++++ at91bootstrap-2.3.2/driver/driver.mk	2007-08-14 21:17:53.000000000 +0200
+@@ -1,10 +1,11 @@
+ # Makefile for AT91-Bootstrap drivers directory
+ 
+-COBJS-y								+=	driver/debug.o
+-COBJS-y								+=	driver/gpio.o
+-COBJS-y								+=	driver/pmc.o
+-COBJS-y								+=	driver/sdramc.o
+-COBJS-y								+=	driver/string.o
+-COBJS-y								+=	driver/udiv.o
+-COBJS-$(CONFIG_NANDFLASH)		+=	driver/nandflash.o
+-COBJS-$(CONFIG_DATAFLASH)			+=	driver/dataflash.o
++COBJS-y				+=	driver/debug.o
++COBJS-y				+=	driver/gpio.o
++COBJS-y				+=	driver/pmc.o
++COBJS-y				+=	driver/sdramc.o
++COBJS-y				+=	driver/string.o
++COBJS-y				+=	driver/udiv.o
++COBJS-$(CONFIG_NANDFLASH)	+=	driver/nandflash.o
++COBJS-$(CONFIG_DATAFLASH)	+=	driver/dataflash.o
++COBJS-$(CONFIG_FLASH)		+=	driver/flash.o
+diff -urN at91bootstrap-2.3/driver/flash.c at91bootstrap-2.3.2/driver/flash.c
+--- at91bootstrap-2.3/driver/flash.c	1970-01-01 01:00:00.000000000 +0100
++++ at91bootstrap-2.3.2/driver/flash.c	2007-08-14 23:20:29.000000000 +0200
+@@ -0,0 +1,132 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2007, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * - Redistributions in binary form must reproduce the above copyright notice,
++ * this list of conditions and the disclaimer below in the documentation and/or
++ * other materials provided with the distribution.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : flash.c
++ * Object              : Flash High level functions
++ * Creation            : USa Aug 14th 2007
++ *---------------------------------------------------------------------------
++*/
++
++#include "../include/part.h"
++#include "../include/main.h"
++#include "../include/flash.h"
++#include "../include/smc.h"
++#include <stdlib.h>
++
++#ifdef CFG_FLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    smc0_hw_init								*/
++/* \brief This function performs Static Memory Controller HW initialization	*/
++/* It should be executed BEFORE the slow clock is changed			*/
++/* WARNING: The C_Startup has done VERY LITTLE at this point			*/
++/*------------------------------------------------------------------------------*/
++void smc0_hw_init(void)
++{
++	/* The SMC is either clocked by the Slow clock or by MCLK
++	 * MCLK is typically 100 MHz
++	 */
++
++unsigned int	setup0,pulse0,cycle0,mode0;
++
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) |DATABUS_PULLUP_ON|MEMORY_VOLTAGE_3_3V , AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Check : SETUP + PULSE <= CYCLE ! */
++
++	setup0	=	
++		((NCS_READ_SETUP & 0x3F)	<< 24)	|	// (128 * bit[5]) + bit[4:0]
++		((NRD_SETUP	 & 0x3F)	<< 16)	|	// (128 * bit[5]) + bit[4:0]
++		((NCS_WR_SETUP	 & 0x3F)	<<  8)	|	// (128 * bit[5]) + bit[4:0]
++		((NWE_SETUP	 & 0x3F)	<<  0);		// (128 * bit[5]) + bit[4:0]
++	writel(setup0, AT91C_BASE_SMC + SMC_SETUP0);
++	
++	pulse0	= 
++		((NCS_READ_PULSE & 0x3F)	<< 24)	|	// (128 * bit[5]) + bit[4:0]
++		((NRD_PULSE	 & 0x3F)	<< 16)	|	// (128 * bit[5]) + bit[4:0]
++		((NCS_WR_PULSE	 & 0x3F)	<<  8)	|	// (128 * bit[5]) + bit[4:0]
++		((NWE_PULSE	 & 0x3F)	<<  0);		// (128 * bit[5]) + bit[4:0]
++	writel(pulse0, AT91C_BASE_SMC + SMC_PULSE0);
++
++	cycle0	= 
++		((NRD_CYCLE	 & 0x1FF)	<< 16)	|	// (256 * bit[8:7]) + bit[6:0]
++		((NWE_CYCLE	 & 0x1FF)	<<  0);		// (256 * bit[8:7]) + bit[6:0]
++	writel(cycle0, AT91C_BASE_SMC + SMC_CYCLE0);
++
++	mode0	= (PS|PMEN|TDF_MODE|TDF_CYCLES|DBW|BAT|EXNW_MODE|WRITE_MODE|READ_MODE);
++	writel(mode0, AT91C_BASE_SMC + SMC_CTRL0);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    flash_is_boot_valid							*/
++/* \brief Check that the first bytes of the buffer are valid ARM vectors	*/
++/*------------------------------------------------------------------------------*/
++static unsigned int flash_is_boot_valid(unsigned char *buffer)
++{
++	int i = 3;
++
++ 	/* Verify if the 28 first bytes of the sram correspond to ARM vectors
++	   The sixth ARM vector contain the size of the code */
++    	while(i < 28)
++    	{
++		if (i != 23)
++		{
++			if ((buffer[i] != 0xEA) && (buffer[i] != 0xE5) )
++				return -1;
++		}
++		i+=4;
++    	}
++
++    	return 0;
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    load_flash								*/
++/* \brief This function loads flash content to specified address		*/
++/*------------------------------------------------------------------------------*/	
++int load_flash(unsigned int img_addr, unsigned int img_size, unsigned int img_dest)
++{
++	unsigned char *src, *dst;
++	src = (unsigned char *) img_addr;
++	dst = (unsigned char *) img_dest;
++
++	flash_hw_init();
++
++	if (flash_is_boot_valid((unsigned char*)img_addr))
++		return -1;
++
++	while (img_size > 0) {
++		*dst++ = *src++;
++		img_size--;
++	}
++   	return 0;
++}
++
++#endif /* CFG_FLASH */
+diff -urN at91bootstrap-2.3/include/AT91SAM9260_inc.h at91bootstrap-2.3.2/include/AT91SAM9260_inc.h
+--- at91bootstrap-2.3/include/AT91SAM9260_inc.h	2006-12-05 11:27:20.000000000 +0100
++++ at91bootstrap-2.3.2/include/AT91SAM9260_inc.h	2007-08-14 23:05:19.000000000 +0200
+@@ -463,7 +463,7 @@
+ #define 	AT91C_EBI_CS5A_SMC                  (0x0 <<  5) // (CCFG) Chip Select 5 is only assigned to the Static Memory Controller and NCS5 behaves as defined by the SMC
+ #define 	AT91C_EBI_CS5A_CF                   (0x1 <<  5) // (CCFG) Chip Select 5 is assigned to the Static Memory Controller and the CompactFlash Logic (second slot) is activated.
+ #define AT91C_EBI_DBPUC           (0x1 <<  8) // (CCFG) Data Bus Pull-up Configuration
+-
++#define	AT91C_EBI_VDDIOMSEL	  (0x1 << 16)
+ // *****************************************************************************
+ //              SOFTWARE API DEFINITION  FOR Peripheral DMA Controller
+ // *****************************************************************************
+diff -urN at91bootstrap-2.3/include/flash.h at91bootstrap-2.3.2/include/flash.h
+--- at91bootstrap-2.3/include/flash.h	1970-01-01 01:00:00.000000000 +0100
++++ at91bootstrap-2.3.2/include/flash.h	2007-08-14 23:20:11.000000000 +0200
+@@ -0,0 +1,41 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2007, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * - Redistributions in binary form must reproduce the above copyright notice,
++ * this list of conditions and the disclaimer below in the documentation and/or
++ * other materials provided with the distribution.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : flash.h
++ * Object              : ATMEL Flash Header File
++ * Creation            : USa Aug 14th 2007
++ *---------------------------------------------------------------------------
++*/
++#ifndef _FLASH_H
++#define _FLASH_H
++extern void flash_hw_init(void);
++extern int load_flash(unsigned int img_addr, unsigned int img_size, unsigned int img_dest);
++#endif
+diff -urN at91bootstrap-2.3/include/smc0_setup.h at91bootstrap-2.3.2/include/smc0_setup.h
+--- at91bootstrap-2.3/include/smc0_setup.h	1970-01-01 01:00:00.000000000 +0100
++++ at91bootstrap-2.3.2/include/smc0_setup.h	2007-08-14 22:54:21.000000000 +0200
+@@ -0,0 +1,32 @@
++/* ******************************************************************* */
++/* SMC0 Settings                                                       */
++/* We use this as a default for all				       */
++/* ******************************************************************* */
++
++#ifndef _SMC0_SETUP_H
++#define _SMC0_SETUP_H
++
++#define	NCS_READ_SETUP	_ns(10)
++#define	NRD_SETUP	_ns(20)
++#define	NCS_WR_SETUP	_ns(10)
++#define	NWE_SETUP	_ns(20)
++
++#define	NCS_READ_PULSE	_ns(100)
++#define	NRD_PULSE	_ns(100)
++#define	NCS_WR_PULSE	_ns(100)
++#define	NWE_PULSE	_ns(100)
++
++#define	NRD_CYCLE	_ns(140)
++#define	NWE_CYCLE	_ns(140)
++
++#define PS		AT91C_SMC_PS_SIZE_SIXTEEN_BYTES
++#define PMEN		PAGE_MODE_OFF
++#define TDF_MODE	TDF_OPTIMIZATION_OFF
++#define TDF_CYCLES	_ns(60)
++#define DBW		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS
++#define BAT		AT91C_SMC_BAT_BYTE_SELECT
++#define EXNW_MODE	AT91C_SMC_NWAITM_NWAIT_DISABLE
++#define WRITE_MODE	CONTROLLED_BY_NWE
++#define READ_MODE	CONTROLLED_BY_NRD
++
++#endif
+diff -urN at91bootstrap-2.3/include/smc.h at91bootstrap-2.3.2/include/smc.h
+--- at91bootstrap-2.3/include/smc.h	1970-01-01 01:00:00.000000000 +0100
++++ at91bootstrap-2.3.2/include/smc.h	2007-08-14 23:05:30.000000000 +0200
+@@ -0,0 +1,19 @@
++#define	MASTER_CLOCK_CYCLE	(1000000000/MASTER_CLOCK)
++#define	_ns(x)	((x)/MASTER_CLOCK_CYCLE)
++
++#define CONTROLLED_BY_NRD	AT91C_SMC_READMODE
++#define CONTROLLED_BY_NCS_RD	0
++#define CONTROLLED_BY_NWE	AT91C_SMC_WRITEMODE
++#define CONTROLLED_BY_NCS_WR	0
++
++#define TDF_OPTIMIZATION_ON	AT91C_SMC_TDFEN
++#define TDF_OPTIMIZATION_OFF	0
++
++#define PAGE_MODE_ON		AT91C_SMC_PMEN
++#define PAGE_MODE_OFF		0
++
++#define	DATABUS_PULLUP_ON	0
++#define	DATABUS_PULLUP_OFF	AT91C_EBI_DBPUC
++
++#define	MEMORY_VOLTAGE_1_8V	0
++#define	MEMORY_VOLTAGE_3_3V	AT91C_EBI_VDDIOMSEL
+diff -urN at91bootstrap-2.3/main.c at91bootstrap-2.3.2/main.c
+--- at91bootstrap-2.3/main.c	2006-12-05 11:27:24.000000000 +0100
++++ at91bootstrap-2.3.2/main.c	2007-08-14 21:15:38.000000000 +0200
+@@ -38,6 +38,7 @@
+ #include "include/main.h"
+ #include "include/debug.h"
+ #include "include/dataflash.h"
++#include "include/flash.h"
+ #include "include/nandflash.h"
+ 
+ /*------------------------------------------------------------------------------*/
+@@ -60,6 +61,10 @@
+ 	load_df(AT91C_SPI_PCS_DATAFLASH, IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
+ #endif
+ 
++#ifdef CFG_FLASH
++	load_flash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
++#endif
++
+ 	/* Load from Nandflash in RAM */
+ #ifdef CFG_NANDFLASH
+ 	load_nandflash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
+diff -urN at91bootstrap-2.3/MAKEALL at91bootstrap-2.3.2/MAKEALL
+--- at91bootstrap-2.3/MAKEALL	2007-04-09 19:47:20.000000000 +0200
++++ at91bootstrap-2.3.2/MAKEALL	2007-08-14 22:43:19.000000000 +0200
+@@ -1,7 +1,7 @@
+ #!/bin/bash
+ 
+-make	toolchain
+-source	gcc-3.4.6-uclibc.sh
++#make	toolchain
++source	gcc-4.1.2-uclibc-external.sh
+ make	distrib
+ make	MEMORY=dataflashcard	at91sam9260dfc_defconfig
+ make
+@@ -9,6 +9,8 @@
+ make
+ make	MEMORY=nandflash	at91sam9260ek_defconfig
+ make
++make	MEMORY=flash		at91sam9260pf_defconfig
++make
+ make	MEMORY=dataflash	at91sam9261ek_defconfig
+ make
+ make	MEMORY=nandflash	at91sam9261ek_defconfig
+diff -urN at91bootstrap-2.3/Makefile at91bootstrap-2.3.2/Makefile
+--- at91bootstrap-2.3/Makefile	2007-08-14 23:53:42.000000000 +0200
++++ at91bootstrap-2.3.2/Makefile	2007-08-14 22:36:24.000000000 +0200
+@@ -8,7 +8,7 @@
+ 
+ TOPDIR	:=	$(CURDIR)
+ 
+-VERSION:=2.3.1
++VERSION:=2.3.2
+ 
+ include	.config
+ 
+@@ -114,6 +114,15 @@
+ 	echo	SPI_BOOT=SPI_BOOT_CS1		>>	.config
+ 	echo	SPI_CLK=$(CONFIG_SPI_CLK)	>>	.config
+ 
++at91sam9260pf_defconfig:	clean
++	echo	BOARDNAME=at91sam9260pf		>	.config
++	echo	BOARD=at91sam9260ek		>>	.config
++	echo	PROJECT=$(MEMORY)		>>	.config
++	echo	CONFIG_$(CFG_MEMORY)=y		>>	.config
++	echo	SPI_MODE=$(CONFIG_SPI_MODE)	>>	.config
++	echo	SPI_BOOT=SPI_BOOT_CS0		>>	.config
++	echo	SPI_CLK=$(CONFIG_SPI_CLK)	>>	.config
++
+ at91sam9261ek_defconfig:	clean
+ 	echo	BOARDNAME=at91sam9261ek		>	.config
+ 	echo	BOARD=at91sam9261ek		>>	.config

Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2007-08-15 09:40:59 UTC (rev 19511)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2007-08-15 09:42:33 UTC (rev 19512)
@@ -4,6 +4,8 @@
 #
 #############################################################
 AT91BOOTSTRAP_VERSION:=2.3
+AT91BOOTSTRAP_PATCH_LEVEL:=2
+AT91BOOTSTRAP_PATCHED_VERSION:=$(AT91BOOTSTRAP_VERSION).$(AT91BOOTSTRAP_PATCH_LEVEL)
 AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
 ATMEL_MIRROR:=$(strip  $(subst ",, $(BR2_ATMEL_MIRROR)))
 #"))
@@ -17,18 +19,32 @@
 AT91BOOTSTRAP_MEMORY:=$(strip  $(subst ",, $(BR2_TARGET_AT91BOOTSTRAP_MEMORY)))
 #"))
 
-AT91BOOTSTRAP_BINARY:=$(BOARD_NAME)-$(AT91BOOTSTRAP_MEMORY)boot-$(AT91BOOTSTRAP_VERSION).bin
+AT91BOOTSTRAP_BINARY:=$(BOARD_NAME)-$(AT91BOOTSTRAP_MEMORY)boot-$(AT91BOOTSTRAP_PATCHED_VERSION).bin
 
 AT91BOOTSTRAP_TARGET:=$(AT91BOOTSTRAP_DIR)/binaries/$(AT91BOOTSTRAP_BINARY)
 
+AT91BOOTSTRAP_JUMP_ADDR:=$(strip  $(subst ",, $(BR2_AT91BOOTSTRAP_JUMP_ADDR)))
+AT91BOOTSTRAP_IMG_SIZE:=$(strip  $(subst ",, $(BR2_AT91BOOTSTRAP_IMG_SIZE)))
+
+AT91_CUSTOM_FLAGS:=
+ifneq	($(AT91BOOTSTRAP_JUMP_ADDR),)
+AT91_CUSTOM_FLAGS+=-DJUMP_ADDR=$(AT91BOOTSTRAP_JUMP_ADDR) 
+endif
+ifneq	($(AT91BOOTSTRAP_IMG_SIZE),)
+AT91_CUSTOM_FLAGS+=-DIMG_SIZE=$(AT91BOOTSTRAP_IMG_SIZE) 
+endif
+
 $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE):
 	 $(WGET) -P $(DL_DIR) $(AT91BOOTSTRAP_SITE)/$(AT91BOOTSTRAP_SOURCE)
 
 $(AT91BOOTSTRAP_DIR)/.unpacked: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
 	mkdir -p $(PROJECT_BUILD_DIR)
 	$(AT91BOOTSTRAP_ZCAT) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
+	toolchain/patch-kernel.sh $(AT91BOOTSTRAP_DIR) target/device/Atmel/at91bootstrap/ at91bootstrap\*.patch
 	touch $(AT91BOOTSTRAP_DIR)/.unpacked
 
+atbu:	$(AT91BOOTSTRAP_DIR)/.unpacked
+
 $(AT91BOOTSTRAP_DIR)/.configured: $(AT91BOOTSTRAP_DIR)/.unpacked .config
 	$(MAKE)					\
 		MEMORY=$(AT91BOOTSTRAP_MEMORY)	\
@@ -41,24 +57,28 @@
 	$(MAKE)					\
 		MEMORY=$(AT91BOOTSTRAP_MEMORY)	\
 		CROSS_COMPILE=$(TARGET_CROSS)	\
+		AT91_CUSTOM_FLAGS="$(AT91_CUSTOM_FLAGS)" \
 		-C $(AT91BOOTSTRAP_DIR)
 
+$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY):	$(AT91BOOTSTRAP_TARGET)
+	mkdir -p $(BINARIES_DIR)
+	cp $(AT91BOOTSTRAP_TARGET)	$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
+	cp $(AT91BOOTSTRAP_TARGET)	/tftpboot/$(AT91BOOTSTRAP_BINARY)
+
+.PHONY:        at91bootstrap at91bootstrap-source
+
+at91bootstrap:	$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
+
 at91bootstrap-source: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
 
+.PHONY:        at91bootstrap-clean at91bootstrap-dirclean
+
 at91bootstrap-clean:
 	make -C $(AT91BOOTSTRAP_DIR) clean
 
 at91bootstrap-dirclean:
 	rm -rf $(AT91BOOTSTRAP_DIR)
 
-at91bootstrap:	$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
-
-$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY):	$(AT91BOOTSTRAP_TARGET)
-	mkdir -p $(BINARIES_DIR)
-	cp $(AT91BOOTSTRAP_TARGET)	$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
-	cp $(AT91BOOTSTRAP_TARGET)	/tftpboot/$(AT91BOOTSTRAP_BINARY)
-
-.PHONY:	at91bootstrap
 #############################################################
 #
 # Toplevel Makefile options

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2007-09-24 22:24 ulf at uclibc.org
  0 siblings, 0 replies; 14+ messages in thread
From: ulf at uclibc.org @ 2007-09-24 22:24 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2007-09-24 15:24:29 -0700 (Mon, 24 Sep 2007)
New Revision: 19999

Log:
Bump version of AT91 bootstrap

Added:
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.4.patch

Modified:
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk


Changeset:
Added: trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.4.patch
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.4.patch	                        (rev 0)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.4.patch	2007-09-24 22:24:29 UTC (rev 19999)
@@ -0,0 +1,336 @@
+diff -urN at91bootstrap-2.3-0rig/driver/dataflash.c at91bootstrap-2.3.4/driver/dataflash.c
+--- at91bootstrap-2.3-0rig/driver/dataflash.c	2007-04-22 13:56:29.000000000 +0200
++++ at91bootstrap-2.3.4/driver/dataflash.c	2007-09-24 20:56:18.000000000 +0200
+@@ -39,8 +39,12 @@
+ #include "../include/part.h"
+ #include "../include/main.h"
+ #include "../include/dataflash.h"
++#include "../include/debug.h"
+ #include <stdlib.h>
+ 
++#define	SUCCESS	1
++#define	FAILURE	0
++
+ #ifdef CFG_DATAFLASH
+ extern	div_t udiv(unsigned int numerator, unsigned int denominator);
+ /* Write SPI register */
+@@ -92,7 +96,7 @@
+ 	/* SPI_Enable */
+ 	write_spi(SPI_CR, AT91C_SPI_SPIEN);
+ 
+-	return 0;
++	return SUCCESS;
+ }
+ 
+ /*------------------------------------------------------------------------------*/
+@@ -134,12 +138,10 @@
+ 
+  	/* Try to get the dataflash semaphore */
+ 	if ((pDataFlash->bSemaphore) != UNLOCKED)
+-		return (char) 0;
++		return (char) FAILURE;
+ 	pDataFlash->bSemaphore = LOCKED;
+-
+ 	/* Compute command pattern */
+ 	dInternalAdr = (result.quot << AT91C_PAGE_OFFSET(pDataFlash)) + result.rem;
+-
+  	if (AT91C_DF_NB_PAGE(pDataFlash) >= 16384)
+ 	{
+ 		pDataFlash->command[0] = (bCmd & 0x000000FF) | \
+@@ -178,7 +180,7 @@
+ 
+     	while (df_is_busy(pDataFlash) == LOCKED);
+ 
+-	return 1;
++	return SUCCESS;
+ }
+ 
+ /*------------------------------------------------------------------------------*/
+@@ -194,13 +196,13 @@
+ 		if (df_get_status(pDataFlash))
+ 		{
+ 			if (df_is_ready(pDataFlash))
+-				return 1;
++				return SUCCESS;
+ 		}
+ 	}
+ 
+-	return 0;
++	return FAILURE;
+ }
+-
++volatile	int loop;
+ /*------------------------------------------------------------------------------*/
+ /* \fn    df_read								*/
+ /* \brief Read a block in dataflash						*/
+@@ -212,21 +214,30 @@
+ 	unsigned int size)
+ {
+ 	unsigned int SizeToRead;
++	int page_counter;
+ 
++	page_counter = 32;
+ 	while (size)
+ 	{
+-		SizeToRead = (size < AT91C_MAX_PDC_SIZE)? size : AT91C_MAX_PDC_SIZE;
+-
++		SizeToRead = (size < 0x8000)? size : 0x8000;
+ 		/* wait the dataflash ready status */
+-		df_wait_ready(pDf);
+-	    	df_continuous_read(pDf, (char *)buffer, SizeToRead, addr);
+-
+-		size -= SizeToRead;
+-		addr += SizeToRead;
+-		buffer += SizeToRead;
++		if(df_wait_ready(pDf) != 0) {
++		    	df_continuous_read(pDf, (char *)buffer, SizeToRead, addr);
++			dbg_print(".");
++			if(--page_counter <= 0) {
++				page_counter = 32;
++				dbg_print("\r\n");
++			}
++			size -= SizeToRead;
++			addr += SizeToRead;
++			buffer += SizeToRead;
++		} else {
++			/* We got a timeout */
++			dbg_print("Timeout while waiting for dataflash ready\n");
++			return FAILURE;
++		}
+ 	}
+-
+-   	return 0;
++   	return SUCCESS;
+ }
+ 
+ /*----------------------------------------------------------------------*/
+@@ -235,13 +246,19 @@
+ /*----------------------------------------------------------------------*/
+ static int df_download(AT91PS_DF pDf, unsigned int img_addr, unsigned int img_size, unsigned int img_dest)
+ {
++	dbg_print(">Loading from Dataflash[");
++	dbg_print_hex(img_addr);
++	dbg_print("] to SDRAM[");
++	dbg_print_hex(img_dest);
++	dbg_print("]\r\n");
+ 	/* read bytes in the dataflash */
+-	df_read(pDf, img_addr,(unsigned char *)img_dest, img_size);
+-
++	if(df_read(pDf, img_addr,(unsigned char *)img_dest, img_size) == FAILURE)
++		return FAILURE;
++	dbg_print("\r\n>Loading complete, [");
++	dbg_print_hex(IMG_SIZE);
++	dbg_print("] bytes\r\n");
+ 	/* wait the dataflash ready status */
+-	df_wait_ready(pDf);
+-
+-    return 0;
++	return df_wait_ready(pDf);
+ }
+ 
+ /*----------------------------------------------------------------------*/
+@@ -263,7 +280,7 @@
+ static int df_init (AT91PS_DF pDf)
+ {
+ 	int dfcode = 0;
+-	int status = 1;
++	int status = SUCCESS;
+ 
+ 	/* Default: AT45DB321B */
+ 	pDf->dfDescription.pages_number = 8192;
+@@ -302,18 +319,21 @@
+ 			pDf->dfDescription.pages_number = 4096;
+ 			pDf->dfDescription.pages_size = 528;
+ 			pDf->dfDescription.page_offset = 10;
++			dbg_print(">AT45DB161D detected\r\n");
+ 			break;
+ 
+ 		case AT45DB321B:
+ 			pDf->dfDescription.pages_number = 8192;
+ 			pDf->dfDescription.pages_size = 528;
+ 			pDf->dfDescription.page_offset = 10;
++			dbg_print(">AT45DB321D detected\r\n");
+ 			break;
+ 
+ 		case AT45DB642:
+ 			pDf->dfDescription.pages_number = 8192;
+ 			pDf->dfDescription.pages_size = 1056;
+ 			pDf->dfDescription.page_offset = 11;
++			dbg_print(">AT45DB642D detected\r\n");
+ 			break;
+ /*
+ 		case AT45DB1282:
+@@ -335,7 +355,7 @@
+ 			break;
+ */
+ 		default:
+-		        status = 0;
++		        status = FAILURE;
+ 			break;
+ 	}
+ 
+@@ -357,12 +377,12 @@
+ 		if (i != 23)
+ 		{
+ 			if ((buffer[i] != 0xEA) && (buffer[i] != 0xE5) )
+-				return -1;
++				return FAILURE;
+ 		}
+ 		i+=4;
+     	}
+ 
+-    	return 0;
++    	return SUCCESS;
+ }
+ 
+ /*------------------------------------------------------------------------------*/
+@@ -374,13 +394,14 @@
+     	AT91S_DF sDF;
+     	AT91PS_DF pDf = (AT91PS_DF)&sDF;
+     	unsigned int rxBuffer[128];
++	unsigned int status;
+ 
+     	pDf->bSemaphore = UNLOCKED;
+ 
+     	df_spi_init(pcs, DF_CS_SETTINGS);
+ 
+-    	if (!df_init(pDf))
+-        	return -1;
++    	if (df_init(pDf) == FAILURE)
++        	return FAILURE;
+ 
+ #ifdef AT91SAM9260
+ 	/* Test if a button has been pressed or not */
+@@ -391,10 +412,13 @@
+     	df_continuous_read(pDf, (char *)rxBuffer, 32, img_addr);
+ 	df_wait_ready(pDf);
+ 
+-	if (df_is_boot_valid((unsigned char*)rxBuffer))
+-		return -1;
++	if (df_is_boot_valid((unsigned char*)rxBuffer) == FAILURE) {
++		dbg_print(">Invalid Boot Area...\n\r");
++		return FAILURE;
++	}
+ 
+-	return df_download(pDf, img_addr, img_size, img_dest);
++	status = df_download(pDf, img_addr, img_size, img_dest);
++	return status;
+ }
+ 
+ #endif /* CFG_DATAFLASH */
+diff -urN at91bootstrap-2.3-0rig/driver/debug.c at91bootstrap-2.3.4/driver/debug.c
+--- at91bootstrap-2.3-0rig/driver/debug.c	2006-12-05 11:27:24.000000000 +0100
++++ at91bootstrap-2.3.4/driver/debug.c	2007-09-24 20:38:01.000000000 +0200
+@@ -85,4 +85,19 @@
+ 	}
+ }
+ 
++void dbg_print_hex(unsigned int data)
++{
++	unsigned char hex[11];
++	int i=0;
++	hex[0]='0';
++	hex[1]='x';
++	for(i = 9 ;i >= 2;i--) {
++		hex[i] = "0123456789ABCDEF"[data & 0xF];
++		data >>= 4;
++	}
++	hex[10]='\0';	
++	dbg_print((const char *) hex);
++}
++
++
+ #endif /* CFG_DEBUG */
+diff -urN at91bootstrap-2.3-0rig/include/debug.h at91bootstrap-2.3.4/include/debug.h
+--- at91bootstrap-2.3-0rig/include/debug.h	2006-12-05 11:27:20.000000000 +0100
++++ at91bootstrap-2.3.4/include/debug.h	2007-09-24 18:26:37.000000000 +0200
+@@ -45,5 +45,6 @@
+ /* Global functions */
+ extern void dbg_init(unsigned int);
+ extern void dbg_print(const char *ptr);
++extern void dbg_print_hex(unsigned int data);
+ 
+ #endif /*_DEBUG_H_*/
+diff -urN at91bootstrap-2.3-0rig/main.c at91bootstrap-2.3.4/main.c
+--- at91bootstrap-2.3-0rig/main.c	2007-09-24 18:26:10.000000000 +0200
++++ at91bootstrap-2.3.4/main.c	2007-09-24 20:56:20.000000000 +0200
+@@ -41,6 +41,10 @@
+ #include "include/flash.h"
+ #include "include/nandflash.h"
+ 
++int test(void)
++{
++
++}
+ /*------------------------------------------------------------------------------*/
+ /* Function Name       : main							*/
+ /* Object              : Main function						*/
+@@ -49,6 +53,7 @@
+ /*------------------------------------------------------------------------------*/
+ int main(void)
+ {
++
+ /* ================== 1st step: Hardware Initialization ================= */
+ 	/* Performs the hardware initialization */
+ #ifdef CFG_HW_INIT
+@@ -60,29 +65,35 @@
+ #ifdef CFG_DATAFLASH
+ 	load_df(AT91C_SPI_PCS_DATAFLASH, IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
+ #endif
+-
+ #ifdef CFG_FLASH
+ 	load_flash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
++	dbg_print(">Flash ready\r\n");
+ #endif
+ 
+ 	/* Load from Nandflash in RAM */
+ #ifdef CFG_NANDFLASH
+ 	load_nandflash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
++	dbg_print(">NANDflash ready\r\n");
+ #endif
+ 
+ /* ==================== 3rd step:  Process the Image =================== */
+ 	/* Uncompress the image */
+ #ifdef GUNZIP
+-	decompress_image((void *)IMG_ADDRESS, (void *)JUMP_ADDR, IMG_SIZE);	/* NOT IMPLEMENTED YET */
++	decompress_image((void *)IMG_ADDRESS, (void *)JUMP_ADDR, IMG_SIZE);
++	/* NOT IMPLEMENTED YET */
++	dbg_print(">Decompress ready\r\n");
+ #endif /* GUNZIP */
+ 
+ /* ==================== 4th step: Start the application =================== */
+ 	/* Set linux arguments */
+ #ifdef LINUX_ARG
+ 	linux_arg(LINUX_ARG);	/* NOT IMPLEMENTED YET */
++	dbg_print(">Linux ready\r\n");
+ #endif /* LINUX_ARG */
+-
++	dbg_print(">Start application at [");
++	dbg_print_hex(JUMP_ADDR);
++	dbg_print("]\r\n");
++	{ volatile unsigned int loop; for(loop = 200000; loop > 0; loop--);}
+ 	/* Jump to the Image Address */
+ 	return JUMP_ADDR;
+ }
+-
+diff -urN at91bootstrap-2.3-0rig/Makefile at91bootstrap-2.3.4/Makefile
+--- at91bootstrap-2.3-0rig/Makefile	2007-09-24 18:26:10.000000000 +0200
++++ at91bootstrap-2.3.4/Makefile	2007-09-24 20:56:53.000000000 +0200
+@@ -8,7 +8,7 @@
+ 
+ TOPDIR	:=	$(CURDIR)
+ 
+-VERSION:=2.3.2
++VERSION:=2.3.4
+ 
+ include	.config
+ 
+@@ -17,7 +17,7 @@
+ endif
+ 
+ ifeq	($(CONFIG_SPI_CLK),)
+-CONFIG_SPI_CLK=5000000
++CONFIG_SPI_CLK=33000000
+ endif
+ 
+ ifndef	MEMORY

Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2007-09-24 21:10:43 UTC (rev 19998)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2007-09-24 22:24:29 UTC (rev 19999)
@@ -4,7 +4,7 @@
 #
 #############################################################
 AT91BOOTSTRAP_VERSION:=2.3
-AT91BOOTSTRAP_PATCH_LEVEL:=2
+AT91BOOTSTRAP_PATCH_LEVEL:=4
 AT91BOOTSTRAP_PATCHED_VERSION:=$(AT91BOOTSTRAP_VERSION).$(AT91BOOTSTRAP_PATCH_LEVEL)
 AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
 ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
@@ -43,7 +43,7 @@
 	mkdir -p $(PROJECT_BUILD_DIR)
 	$(AT91BOOTSTRAP_ZCAT) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
 	toolchain/patch-kernel.sh $(AT91BOOTSTRAP_DIR) target/device/Atmel/at91bootstrap/ at91bootstrap\*.patch
-	touch $(AT91BOOTSTRAP_DIR)/.unpacked
+	touch $@
 
 $(AT91BOOTSTRAP_DIR)/.configured: $(AT91BOOTSTRAP_DIR)/.unpacked .config
 	$(MAKE) \
@@ -51,7 +51,7 @@
 		CROSS_COMPILE=$(TARGET_CROSS) \
 		-C $(AT91BOOTSTRAP_DIR) \
 		$(BOARD_NAME)_defconfig
-	touch $(AT91BOOTSTRAP_DIR)/.configured
+	touch $@
 
 $(AT91BOOTSTRAP_TARGET): $(AT91BOOTSTRAP_DIR)/.configured
 	$(MAKE) \

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2007-10-21 20:13 ulf at uclibc.org
  0 siblings, 0 replies; 14+ messages in thread
From: ulf at uclibc.org @ 2007-10-21 20:13 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2007-10-21 13:13:40 -0700 (Sun, 21 Oct 2007)
New Revision: 20314

Log:
Comment should depend on AT91 bootstrap beeing built

Modified:
   trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in


Changeset:
Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in	2007-10-21 20:09:22 UTC (rev 20313)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in	2007-10-21 20:13:40 UTC (rev 20314)
@@ -80,4 +80,5 @@
 	depends on BR2_TARGET_AT91BOOTSTRAP
 
 comment "It will be copied to $(BR2_AT91BOOTSTRAP_JUMP_ADDR)"
+	depends on BR2_TARGET_AT91BOOTSTRAP
 

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2008-03-11 16:19 ninevoltz at uclibc.org
  0 siblings, 0 replies; 14+ messages in thread
From: ninevoltz at uclibc.org @ 2008-03-11 16:19 UTC (permalink / raw)
  To: buildroot

Author: ninevoltz
Date: 2008-03-11 09:19:33 -0700 (Tue, 11 Mar 2008)
New Revision: 21295

Log:
download url was invalid

Modified:
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk


Changeset:
Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2008-03-11 15:58:05 UTC (rev 21294)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2008-03-11 16:19:33 UTC (rev 21295)
@@ -6,7 +6,7 @@
 AT91BOOTSTRAP_VERSION:=2.3
 AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
 ATMEL_MIRROR:=$(strip  $(subst ",, $(BR2_ATMEL_MIRROR)))
-AT91BOOTSTRAP_SITE:=$(ATMEL_MIRROR)/Source
+AT91BOOTSTRAP_SITE:=$(ATMEL_MIRROR)
 AT91BOOTSTRAP_SOURCE:=$(AT91BOOTSTRAP_NAME).tar.bz2
 AT91BOOTSTRAP_DIR:=$(PROJECT_BUILD_DIR)/$(AT91BOOTSTRAP_NAME)
 AT91BOOTSTRAP:=$(strip  $(subst ",, $(BR2_AT91BOOTSTRAP)))

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2008-04-10 21:05 ulf at uclibc.org
  0 siblings, 0 replies; 14+ messages in thread
From: ulf at uclibc.org @ 2008-04-10 21:05 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2008-04-10 14:05:30 -0700 (Thu, 10 Apr 2008)
New Revision: 21696

Log:
Add configuration items to at91bootstrap

Modified:
   trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk


Changeset:
Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in	2008-04-10 21:03:27 UTC (rev 21695)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in	2008-04-10 21:05:30 UTC (rev 21696)
@@ -1,5 +1,5 @@
 config BR2_TARGET_AT91BOOTSTRAP
-	depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9260DFC || \
+	depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9260DFC || BR2_TARGET_AT91SAM9260PF || \
 	BR2_TARGET_AT91SAM9261EK || BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9XEEK
 	bool "Build AT91 Bootstrap for selected chip"
 
@@ -26,8 +26,8 @@
 	bool "NAND Flash"
 
 config BR2_TARGET_AT91BOOT_FLASH
-        depends on BR2_TARGET_AT91SAM9XEEK
-	bool "Internal Flash"
+        depends on BR2_TARGET_AT91SAM9XEEK || BR2_TARGET_AT91SAM9260PF
+	bool "Internal Flash or external parallel flash"
 
 endchoice
 
@@ -37,3 +37,47 @@
 	default	"dataflashcard"	if	BR2_TARGET_AT91BOOT_DATAFLASHCARD
 	default	"nandflash"	if	BR2_TARGET_AT91BOOT_NANDFLASH
 	default	"flash"		if	BR2_TARGET_AT91BOOT_FLASH
+
+config	BR2_AT91BOOTSTRAP_IMG_SIZE
+	string	"Image Size to copy to SDRAM"
+	default	"0x32000"	if	BR2_TARGET_AT91BOOT_DATAFLASH || BR2_TARGET_AT91BOOT_DATAFLASHCARD
+	default	"0x30000"	if	BR2_TARGET_AT91BOOT_NANDFLASH
+	default	"0x100000"	if	BR2_TARGET_AT91BOOT_FLASH
+	depends BR2_TARGET_AT91BOOTSTRAP
+	help
+	  Select the size of your application
+	  AT91 Bootstrap will copy this amount from flash to SDRAM
+
+choice	
+	prompt "Start address of application"
+	default BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
+	depends on BR2_TARGET_AT91BOOTSTRAP
+	help
+	  Select Chip for which AT91 bootstrap should be built
+	  Currently supports AT91SAM9260EK, AT91SAM9261EK, AT91SAM9XEEK, AT91SAM9263EK
+
+config	BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
+	bool "Copy to the default U-Boot start location in the SDRAM"
+	help
+	  This is where you copy the U-Boot boot loader
+
+config	BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM
+	bool "Copy to the last Megabyte of the SDRAM"
+	help
+	  This is where you copy a boot loader
+
+config	BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM
+	bool "Copy to the start of the SDRAM"
+	help
+	  This is where you copy a standalone application
+endchoice
+
+config	BR2_AT91BOOTSTRAP_JUMP_ADDR
+	string
+	default	"0x23F00000" if BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
+	default	"0x23F00000" if BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM	
+	default "0x20000000" if BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM
+	depends on BR2_TARGET_AT91BOOTSTRAP
+
+comment "It will be copied to $(BR2_AT91BOOTSTRAP_JUMP_ADDR)"
+

Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2008-04-10 21:03:27 UTC (rev 21695)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2008-04-10 21:05:30 UTC (rev 21696)
@@ -4,59 +4,83 @@
 #
 #############################################################
 AT91BOOTSTRAP_VERSION:=2.3
+AT91BOOTSTRAP_PATCH_LEVEL:=4
+AT91BOOTSTRAP_PATCHED_VERSION:=$(AT91BOOTSTRAP_VERSION).$(AT91BOOTSTRAP_PATCH_LEVEL)
 AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
-ATMEL_MIRROR:=$(strip  $(subst ",, $(BR2_ATMEL_MIRROR)))
+ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
+#"))
 AT91BOOTSTRAP_SITE:=$(ATMEL_MIRROR)
 AT91BOOTSTRAP_SOURCE:=$(AT91BOOTSTRAP_NAME).tar.bz2
 AT91BOOTSTRAP_DIR:=$(PROJECT_BUILD_DIR)/$(AT91BOOTSTRAP_NAME)
-AT91BOOTSTRAP:=$(strip  $(subst ",, $(BR2_AT91BOOTSTRAP)))
-AT91BOOTSTRAP_ZCAT:=bzcat
+AT91BOOTSTRAP:=$(strip $(subst ",, $(BR2_AT91BOOTSTRAP)))
+#"))
+AT91BOOTSTRAP_ZCAT:=$(BZCAT)
 
-AT91BOOTSTRAP_MEMORY:=$(strip  $(subst ",, $(BR2_TARGET_AT91BOOTSTRAP_MEMORY)))
+AT91BOOTSTRAP_MEMORY:=$(strip $(subst ",, $(BR2_TARGET_AT91BOOTSTRAP_MEMORY)))
+#"))
 
+AT91BOOTSTRAP_BINARY:=$(BOARD_NAME)-$(AT91BOOTSTRAP_MEMORY)boot-$(AT91BOOTSTRAP_PATCHED_VERSION).bin
 
-AT91BOOTSTRAP_BINARY:=$(BOARD_NAME)-$(AT91BOOTSTRAP_MEMORY)boot-$(AT91BOOTSTRAP_VERSION).bin
-
 AT91BOOTSTRAP_TARGET:=$(AT91BOOTSTRAP_DIR)/binaries/$(AT91BOOTSTRAP_BINARY)
 
+AT91BOOTSTRAP_JUMP_ADDR:=$(strip $(subst ",, $(BR2_AT91BOOTSTRAP_JUMP_ADDR)))
+#"))
+AT91BOOTSTRAP_IMG_SIZE:=$(strip $(subst ",, $(BR2_AT91BOOTSTRAP_IMG_SIZE)))
+#"))
+
+AT91_CUSTOM_FLAGS:=
+ifneq ($(AT91BOOTSTRAP_JUMP_ADDR),)
+AT91_CUSTOM_FLAGS+=-DJUMP_ADDR=$(AT91BOOTSTRAP_JUMP_ADDR)
+endif
+ifneq ($(AT91BOOTSTRAP_IMG_SIZE),)
+AT91_CUSTOM_FLAGS+=-DIMG_SIZE=$(AT91BOOTSTRAP_IMG_SIZE)
+endif
+
 $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE):
 	 $(WGET) -P $(DL_DIR) $(AT91BOOTSTRAP_SITE)/$(AT91BOOTSTRAP_SOURCE)
 
 $(AT91BOOTSTRAP_DIR)/.unpacked: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
 	mkdir -p $(PROJECT_BUILD_DIR)
 	$(AT91BOOTSTRAP_ZCAT) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
+	toolchain/patch-kernel.sh $(AT91BOOTSTRAP_DIR) target/device/Atmel/at91bootstrap/ at91bootstrap\*.patch
 	touch $(AT91BOOTSTRAP_DIR)/.unpacked
 
 $(AT91BOOTSTRAP_DIR)/.configured: $(AT91BOOTSTRAP_DIR)/.unpacked .config
-	$(MAKE)					\
-		MEMORY=$(AT91BOOTSTRAP_MEMORY)	\
-		CROSS_COMPILE=$(TARGET_CROSS)	\
-		-C $(AT91BOOTSTRAP_DIR)		\
+	$(MAKE) \
+		MEMORY=$(AT91BOOTSTRAP_MEMORY) \
+		CROSS_COMPILE=$(TARGET_CROSS) \
+		-C $(AT91BOOTSTRAP_DIR) \
 		$(BOARD_NAME)_defconfig
-	touch	$(AT91BOOTSTRAP_DIR)/.configured
+	touch $(AT91BOOTSTRAP_DIR)/.configured
 
 $(AT91BOOTSTRAP_TARGET): $(AT91BOOTSTRAP_DIR)/.configured
-	$(MAKE)					\
-		MEMORY=$(AT91BOOTSTRAP_MEMORY)	\
-		CROSS_COMPILE=$(TARGET_CROSS)	\
+	$(MAKE) \
+		MEMORY=$(AT91BOOTSTRAP_MEMORY) \
+		CROSS_COMPILE=$(TARGET_CROSS) \
+		AT91_CUSTOM_FLAGS="$(AT91_CUSTOM_FLAGS)" \
 		-C $(AT91BOOTSTRAP_DIR)
 
+$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY): $(AT91BOOTSTRAP_TARGET)
+	mkdir -p $(BINARIES_DIR)
+	cp $(AT91BOOTSTRAP_TARGET) $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
+	cp $(AT91BOOTSTRAP_TARGET) /tftpboot/$(AT91BOOTSTRAP_BINARY)
+
+.PHONY: at91bootstrap at91bootstrap-source
+
+at91bootstrap: $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
+
 at91bootstrap-source: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
 
+at91bootstrap-unpacked: $(AT91BOOTSTRAP_DIR)/.unpacked
+
+.PHONY: at91bootstrap-clean at91bootstrap-dirclean
+
 at91bootstrap-clean:
 	make -C $(AT91BOOTSTRAP_DIR) clean
 
 at91bootstrap-dirclean:
 	rm -rf $(AT91BOOTSTRAP_DIR)
 
-at91bootstrap:	$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
-
-$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY):	$(AT91BOOTSTRAP_TARGET)
-	mkdir -p $(BINARIES_DIR)
-	cp $(AT91BOOTSTRAP_TARGET)	$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
-	cp $(AT91BOOTSTRAP_TARGET)	/tftpboot/$(AT91BOOTSTRAP_BINARY)
-
-.PHONY:	at91bootstrap
 #############################################################
 #
 # Toplevel Makefile options

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2009-01-06 16:36 ulf at uclibc.org
  0 siblings, 0 replies; 14+ messages in thread
From: ulf at uclibc.org @ 2009-01-06 16:36 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2009-01-06 16:36:45 +0000 (Tue, 06 Jan 2009)
New Revision: 24708

Log:
Add support for SAM9G20 in at91bootstrap

Modified:
   trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in


Changeset:
Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in	2009-01-06 16:30:32 UTC (rev 24707)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in	2009-01-06 16:36:45 UTC (rev 24708)
@@ -1,6 +1,6 @@
 config BR2_TARGET_AT91BOOTSTRAP
 	depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9260DFC || BR2_TARGET_AT91SAM9260PF || \
-	BR2_TARGET_AT91SAM9261EK || BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9XEEK
+	BR2_TARGET_AT91SAM9261EK || BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9XEEK || BR2_TARGET_AT91SAM9G20DFC
 	bool "Build AT91 Bootstrap for selected chip"
 
 config BR2_TARGET_AT91BOOTSTRAP_BOARD
@@ -22,16 +22,16 @@
 
 config BR2_TARGET_AT91BOOT_DATAFLASH
         depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9261EK || \
-		BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9XEEK
+		BR2_TARGET_AT91SAM9XEEK  || BR2_TARGET_AT91SAM9G20DFC
 
 	bool "Dataflash"
 
 config BR2_TARGET_AT91BOOT_DATAFLASHCARD
-       depends on BR2_TARGET_AT91SAM9260DFC
+       depends on BR2_TARGET_AT91SAM9260DFC || BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9G20DFC
 	bool "Dataflash Card"
 
 config BR2_TARGET_AT91BOOT_NANDFLASH
-        depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9261EK || BR2_TARGET_AT91SAM9263EK
+        depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9261EK || BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9G20DFC
 	bool "NAND Flash"
 
 config BR2_TARGET_AT91BOOT_FLASH

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2009-01-11 21:44 ulf at uclibc.org
  2009-01-13 17:00 ` Matt Wood
  0 siblings, 1 reply; 14+ messages in thread
From: ulf at uclibc.org @ 2009-01-11 21:44 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2009-01-11 21:44:14 +0000 (Sun, 11 Jan 2009)
New Revision: 24772

Log:
Update at91bootstrap to 2.10

Modified:
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk


Changeset:
Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2009-01-11 21:42:07 UTC (rev 24771)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2009-01-11 21:44:14 UTC (rev 24772)
@@ -3,9 +3,10 @@
 # at91bootstrap
 #
 #############################################################
-AT91BOOTSTRAP_VERSION:=2.9
+#AT91BOOTSTRAP_VERSION:=2.3
+#AT91BOOTSTRAP_PATCH_LEVEL:=.4
+AT91BOOTSTRAP_VERSION:=2.10
 AT91BOOTSTRAP_PATCH_LEVEL:=
-
 AT91BOOTSTRAP_PATCHED_VERSION:=$(AT91BOOTSTRAP_VERSION)$(AT91BOOTSTRAP_PATCH_LEVEL)
 AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
 ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
@@ -57,6 +58,8 @@
 		$(AT91BOOTSTRAP_BOARD)_defconfig
 	touch $(AT91BOOTSTRAP_DIR)/.configured
 
+#		$(BOARD_NAME)_defconfig
+
 $(AT91BOOTSTRAP_TARGET): $(AT91BOOTSTRAP_DIR)/.configured
 	$(MAKE) \
 		MEMORY=$(AT91BOOTSTRAP_MEMORY) \
@@ -64,13 +67,18 @@
 		AT91_CUSTOM_FLAGS="$(AT91_CUSTOM_FLAGS)" \
 		-C $(AT91BOOTSTRAP_DIR)
 
-$(AT91BOOTSTRAP_DIR)/.installed: $(AT91BOOTSTRAP_TARGET)
+$(AT91BOOTSTRAP_DIR)/.installed:: $(AT91BOOTSTRAP_TARGET)
 	mkdir -p $(BINARIES_DIR)
+ifeq	($(AT91BOOTSTRAP_VERSION),2.3)
+	cp $(AT91BOOTSTRAP_TARGET) $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
+	cp $(AT91BOOTSTRAP_TARGET) $(BR2_TARGET_ATMEL_COPYTO)/$(AT91BOOTSTRAP_BINARY)
+else
 	make MEMORY=$(AT91BOOTSTRAP_MEMORY) \
-	     CROSS_COMPILE=$(TARGET_CROSS) \
-	     -C $(AT91BOOTSTRAP_DIR) boot
+		CROSS_COMPILE=$(TARGET_CROSS) \
+		-C $(AT91BOOTSTRAP_DIR) boot
 	make DESTDIR=$(BINARIES_DIR) -C $(AT91BOOTSTRAP_DIR) install
 	make DESTDIR=$(BR2_TARGET_ATMEL_COPYTO) -C $(AT91BOOTSTRAP_DIR) install
+endif
 	touch $@
 
 #	cp $(AT91BOOTSTRAP_TARGET) $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
@@ -100,3 +108,7 @@
 ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
 TARGETS+=at91bootstrap
 endif
+
+at91bootstrap-status:
+	@echo AT91BOOTSTRAP_BOARD=$(AT91BOOTSTRAP_BOARD)
+

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
  2009-01-11 21:44 ulf at uclibc.org
@ 2009-01-13 17:00 ` Matt Wood
  2009-01-15 22:47   ` Ulf Samuelsson
  0 siblings, 1 reply; 14+ messages in thread
From: Matt Wood @ 2009-01-13 17:00 UTC (permalink / raw)
  To: buildroot

Hi Ulf, I tried to compile at91bootstrap for NAND flash boot and I get the following error below...looks like it is not swithcing the default configuration to NAND flash.  If I try to build manually using "MEMORY=nandflash make at91sam9263ek_defconfig" it just copies the default config file and builds for dataflash.  Any ideas?

Thanks, Matt.

bzcat /usr/local/install/downloads/at91bootstrap-2.10.tar.bz2 | tar -C /usr/arm/buildroot/project_build_arm/at91sam9263ek   -xf -
toolchain/patch-kernel.sh /usr/arm/buildroot/project_build_arm/at91sam9263ek/at91bootstrap-2.10 target/device/Atmel/at91bootstrap/ at91bootstrap-2.10\*.patch
touch /usr/arm/buildroot/project_build_arm/at91sam9263ek/at91bootstrap-2.10/.unpacked
/usr/bin/make -j3 \
                MEMORY=nandflash \
                CROSS_COMPILE=/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc- \
                -C /usr/arm/buildroot/project_build_arm/at91sam9263ek/at91bootstrap-2.10 \
                at91sam9263ek_defconfig
make[1]: Entering directory `/usr/arm/buildroot/project_build_arm/at91sam9263ek/at91bootstrap-2.10'
echo ./board/at91sam9263ek/at91sam9263ek_defconfig
./board/at91sam9263ek/at91sam9263ek_defconfig
cp ./board/at91sam9263ek/at91sam9263ek_defconfig .config
make[1]: Leaving directory `/usr/arm/buildroot/project_build_arm/at91sam9263ek/at91bootstrap-2.10'
touch /usr/arm/buildroot/project_build_arm/at91sam9263ek/at91bootstrap-2.10/.configured
/usr/bin/make -j3 \
                MEMORY=nandflash \
                CROSS_COMPILE=/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc- \
                AT91_CUSTOM_FLAGS=" -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000" \
                -C /usr/arm/buildroot/project_build_arm/at91sam9263ek/at91bootstrap-2.10
make[1]: Entering directory `/usr/arm/buildroot/project_build_arm/at91sam9263ek/at91bootstrap-2.10'
mkdir -p build/at91sam9263ek/
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc  -g -Os -Wall -Dat91sam9263ek -Iboard/at91sam9263ek -Iinclude -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ         -DJUMP_ADDR=0x23F00000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000  -c -o build/at91sam9263ek/crt0_gnu.o crt0_gnu.S
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc   -g -Os -Wall -Dat91sam9263ek -Iboard/at91sam9263ek -Iinclude -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ        -DJUMP_ADDR=0x23F00000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000  -c -o build/at91sam9263ek/_udivsi3.o libc/_udivsi3.S
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc   -g -Os -Wall -Dat91sam9263ek -Iboard/at91sam9263ek -Iinclude -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ        -DJUMP_ADDR=0x23F00000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000  -c -o build/at91sam9263ek/_umodsi3.o libc/_umodsi3.S
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc -g -Os -Wall      -Iboard/at91sam9263ek -Iinclude -DAT91BOOTSTRAP_VERSION=\"2.10\" -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ    -DJUMP_ADDR=0x23F00000 -DIMG_ADDRESS=0x00008400        -DIMG_SIZE=0x00040000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000 -DCONFIG_DATAFLASH -DCONFIG_SDRAM -DCONFIG_DEBUG -DCONFIG_HW_INIT -c -o build/at91sam9263ek/main.o main.c
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc -g -Os -Wall      -Iboard/at91sam9263ek -Iinclude -DAT91BOOTSTRAP_VERSION=\"2.10\" -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ    -DJUMP_ADDR=0x23F00000 -DIMG_ADDRESS=0x00008400        -DIMG_SIZE=0x00040000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000 -DCONFIG_DATAFLASH -DCONFIG_SDRAM -DCONFIG_DEBUG -DCONFIG_HW_INIT -c -o build/at91sam9263ek/at91sam9263ek.o board/at91sam9263ek/at91sam9263ek.c
<command-line>: warning: "IMG_SIZE" redefined
<command-line>: warning: this is the location of the previous definition
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc   -g -Os -Wall    -Iboard/at91sam9263ek -Iinclude -DAT91BOOTSTRAP_VERSION=\"2.10\" -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ    -DJUMP_ADDR=0x23F00000 -DIMG_ADDRESS=0x00008400        -DIMG_SIZE=0x00040000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000 -DCONFIG_DATAFLASH -DCONFIG_SDRAM -DCONFIG_DEBUG -DCONFIG_HW_INIT -c -o build/at91sam9263ek/string.o      libc/string.c
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc   -g -Os -Wall    -Iboard/at91sam9263ek -Iinclude -DAT91BOOTSTRAP_VERSION=\"2.10\" -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ    -DJUMP_ADDR=0x23F00000 -DIMG_ADDRESS=0x00008400        -DIMG_SIZE=0x00040000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000 -DCONFIG_DATAFLASH -DCONFIG_SDRAM -DCONFIG_DEBUG -DCONFIG_HW_INIT -c -o build/at91sam9263ek/div0.o        libc/div0.c
<command-line>: warning: "IMG_SIZE" redefined
<command-line>: warning: this is the location of the previous definition
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc   -g -Os -Wall    -Iboard/at91sam9263ek -Iinclude -DAT91BOOTSTRAP_VERSION=\"2.10\" -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ    -DJUMP_ADDR=0x23F00000 -DIMG_ADDRESS=0x00008400        -DIMG_SIZE=0x00040000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000 -DCONFIG_DATAFLASH -DCONFIG_SDRAM -DCONFIG_DEBUG -DCONFIG_HW_INIT -c -o build/at91sam9263ek/udiv.o        libc/udiv.c
<command-line>: warning: "IMG_SIZE" redefined
<command-line>: warning: this is the location of the previous definition
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc   -g -Os -Wall    -Iboard/at91sam9263ek -Iinclude -DAT91BOOTSTRAP_VERSION=\"2.10\" -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ    -DJUMP_ADDR=0x23F00000 -DIMG_ADDRESS=0x00008400        -DIMG_SIZE=0x00040000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000 -DCONFIG_DATAFLASH -DCONFIG_SDRAM -DCONFIG_DEBUG -DCONFIG_HW_INIT -c -o build/at91sam9263ek/debug.o driver//debug.c
<command-line>: warning: "IMG_SIZE" redefined
<command-line>: warning: this is the location of the previous definition
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc   -g -Os -Wall    -Iboard/at91sam9263ek -Iinclude -DAT91BOOTSTRAP_VERSION=\"2.10\" -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ    -DJUMP_ADDR=0x23F00000 -DIMG_ADDRESS=0x00008400        -DIMG_SIZE=0x00040000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000 -DCONFIG_DATAFLASH -DCONFIG_SDRAM -DCONFIG_DEBUG -DCONFIG_HW_INIT -c -o build/at91sam9263ek/gpio.o driver//gpio.c
<command-line>: warning: "IMG_SIZE" redefined
<command-line>: warning: this is the location of the previous definition
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc   -g -Os -Wall    -Iboard/at91sam9263ek -Iinclude -DAT91BOOTSTRAP_VERSION=\"2.10\" -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ    -DJUMP_ADDR=0x23F00000 -DIMG_ADDRESS=0x00008400        -DIMG_SIZE=0x00040000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000 -DCONFIG_DATAFLASH -DCONFIG_SDRAM -DCONFIG_DEBUG -DCONFIG_HW_INIT -c -o build/at91sam9263ek/pmc.o driver//pmc.c
<command-line>: warning: "IMG_SIZE" redefined
<command-line>: warning: this is the location of the previous definition
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc   -g -Os -Wall    -Iboard/at91sam9263ek -Iinclude -DAT91BOOTSTRAP_VERSION=\"2.10\" -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ    -DJUMP_ADDR=0x23F00000 -DIMG_ADDRESS=0x00008400        -DIMG_SIZE=0x00040000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000 -DCONFIG_DATAFLASH -DCONFIG_SDRAM -DCONFIG_DEBUG -DCONFIG_HW_INIT -c -o build/at91sam9263ek/sdramc.o driver//sdramc.c
<command-line>: warning: "IMG_SIZE" redefined
<command-line>: warning: this is the location of the previous definition
/usr/arm/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc   -g -Os -Wall    -Iboard/at91sam9263ek -Iinclude -DAT91BOOTSTRAP_VERSION=\"2.10\" -DAT91SAM9263 -Dat91sam9263ek -DMACH_TYPE=0x4B2 -DTOP_OF_MEMORY=0x314000 -DCRYSTAL_16_36766MHZ    -DJUMP_ADDR=0x23F00000 -DIMG_ADDRESS=0x00008400        -DIMG_SIZE=0x00040000 -DJUMP_ADDR=0x23F00000 -DIMG_SIZE=0x32000 -DCONFIG_DATAFLASH -DCONFIG_SDRAM -DCONFIG_DEBUG -DCONFIG_HW_INIT -c -o build/at91sam9263ek/dataflash.o driver//dataflash.c
<command-line>: warning: "IMG_SIZE" redefined
<command-line>: warning: this is the location of the previous definition
<command-line>: warning: "IMG_SIZE" redefined
<command-line>: warning: this is the location of the previous definition
driver//dataflash.c: In function 'burn_df':
driver//dataflash.c:509: error: 'AT91C_SPI_CLK' undeclared (first use in this function)
driver//dataflash.c:509: error: (Each undeclared identifier is reported only once
driver//dataflash.c:509: error: for each function it appears in.)
driver//dataflash.c: In function 'load_df':
driver//dataflash.c:531: error: 'AT91C_SPI_CLK' undeclared (first use in this function)
make[1]: *** [build/at91sam9263ek/dataflash.o] Error 1
make[1]: *** Waiting for unfinished jobs....
<command-line>: warning: "IMG_SIZE" redefined
<command-line>: warning: this is the location of the previous definition
main.c: In function 'main':
main.c:195: error: 'AT91C_SPI_PCS_DATAFLASH' undeclared (first use in this function)
main.c:195: error: (Each undeclared identifier is reported only once
main.c:195: error: for each function it appears in.)
make[1]: *** [build/at91sam9263ek/main.o] Error 1
make[1]: Leaving directory `/usr/arm/buildroot/project_build_arm/at91sam9263ek/at91bootstrap-2.10'
make: *** [/usr/arm/buildroot/project_build_arm/at91sam9263ek/at91bootstrap-2.10/binaries/at91sam9263ek-nandflashboot-2.10.bin] Error 2
-------- Original-Nachricht --------
> Datum: Sun, 11 Jan 2009 21:44:16 +0000 (UTC)
> Von: ulf at uclibc.org
> An: buildroot at uclibc.org
> Betreff: [Buildroot] svn commit:	trunk/buildroot/target/device/Atmel/at91bootstrap

> Author: ulf
> Date: 2009-01-11 21:44:14 +0000 (Sun, 11 Jan 2009)
> New Revision: 24772
> 
> Log:
> Update at91bootstrap to 2.10
> 
> Modified:
>    trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk
> 
> 
> Changeset:
> Modified:
> trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk
> ===================================================================
> ---
> trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2009-01-11 21:42:07 UTC (rev 24771)
> +++
> trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2009-01-11 21:44:14 UTC (rev 24772)
> @@ -3,9 +3,10 @@
>  # at91bootstrap
>  #
>  #############################################################
> -AT91BOOTSTRAP_VERSION:=2.9
> +#AT91BOOTSTRAP_VERSION:=2.3
> +#AT91BOOTSTRAP_PATCH_LEVEL:=.4
> +AT91BOOTSTRAP_VERSION:=2.10
>  AT91BOOTSTRAP_PATCH_LEVEL:=
> -
> 
> AT91BOOTSTRAP_PATCHED_VERSION:=$(AT91BOOTSTRAP_VERSION)$(AT91BOOTSTRAP_PATCH_LEVEL)
>  AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
>  ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
> @@ -57,6 +58,8 @@
>  		$(AT91BOOTSTRAP_BOARD)_defconfig
>  	touch $(AT91BOOTSTRAP_DIR)/.configured
>  
> +#		$(BOARD_NAME)_defconfig
> +
>  $(AT91BOOTSTRAP_TARGET): $(AT91BOOTSTRAP_DIR)/.configured
>  	$(MAKE) \
>  		MEMORY=$(AT91BOOTSTRAP_MEMORY) \
> @@ -64,13 +67,18 @@
>  		AT91_CUSTOM_FLAGS="$(AT91_CUSTOM_FLAGS)" \
>  		-C $(AT91BOOTSTRAP_DIR)
>  
> -$(AT91BOOTSTRAP_DIR)/.installed: $(AT91BOOTSTRAP_TARGET)
> +$(AT91BOOTSTRAP_DIR)/.installed:: $(AT91BOOTSTRAP_TARGET)
>  	mkdir -p $(BINARIES_DIR)
> +ifeq	($(AT91BOOTSTRAP_VERSION),2.3)
> +	cp $(AT91BOOTSTRAP_TARGET) $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
> +	cp $(AT91BOOTSTRAP_TARGET)
> $(BR2_TARGET_ATMEL_COPYTO)/$(AT91BOOTSTRAP_BINARY)
> +else
>  	make MEMORY=$(AT91BOOTSTRAP_MEMORY) \
> -	     CROSS_COMPILE=$(TARGET_CROSS) \
> -	     -C $(AT91BOOTSTRAP_DIR) boot
> +		CROSS_COMPILE=$(TARGET_CROSS) \
> +		-C $(AT91BOOTSTRAP_DIR) boot
>  	make DESTDIR=$(BINARIES_DIR) -C $(AT91BOOTSTRAP_DIR) install
>  	make DESTDIR=$(BR2_TARGET_ATMEL_COPYTO) -C $(AT91BOOTSTRAP_DIR) install
> +endif
>  	touch $@
>  
>  #	cp $(AT91BOOTSTRAP_TARGET) $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
> @@ -100,3 +108,7 @@
>  ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
>  TARGETS+=at91bootstrap
>  endif
> +
> +at91bootstrap-status:
> +	@echo AT91BOOTSTRAP_BOARD=$(AT91BOOTSTRAP_BOARD)
> +
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
Psssst! Schon vom neuen GMX MultiMessenger geh?rt? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
  2009-01-13 17:00 ` Matt Wood
@ 2009-01-15 22:47   ` Ulf Samuelsson
  0 siblings, 0 replies; 14+ messages in thread
From: Ulf Samuelsson @ 2009-01-15 22:47 UTC (permalink / raw)
  To: buildroot

tis 2009-01-13 klockan 18:00 +0100 skrev Matt Wood:
> Hi Ulf, I tried to compile at91bootstrap for NAND flash boot and I get the following error below...

> looks like it is not swithcing the default configuration to NAND flash.  

> If I try to build manually using "MEMORY=nandflash make at91sam9263ek_defconfig" it just copies the default config file and builds for dataflash.  Any ideas?
> 
> Thanks, Matt.

make at91sam9263nf_defconfig
make

works!

BR
Ulf Samuelsson

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2009-01-29 20:52 ulf at uclibc.org
  0 siblings, 0 replies; 14+ messages in thread
From: ulf at uclibc.org @ 2009-01-29 20:52 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2009-01-29 20:52:52 +0000 (Thu, 29 Jan 2009)
New Revision: 25138

Log:
Remove obsolete at91bootstrap patches

Removed:
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.1.patch
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.4.patch


Changeset:

Sorry, the patch is too large to include (1082 lines).
Please use ViewCVS to see it!

http://uclibc.org/cgi-bin/viewcvs.cgi?view=rev&root=svn&rev=25138

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2009-01-29 21:28 ulf at uclibc.org
  0 siblings, 0 replies; 14+ messages in thread
From: ulf at uclibc.org @ 2009-01-29 21:28 UTC (permalink / raw)
  To: buildroot

Author: ulf
Date: 2009-01-29 21:28:57 +0000 (Thu, 29 Jan 2009)
New Revision: 25141

Log:
Clean up at91bootstrap

Modified:
   trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in
   trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk


Changeset:
Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in	2009-01-29 21:27:51 UTC (rev 25140)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/Config.in	2009-01-29 21:28:57 UTC (rev 25141)
@@ -1,12 +1,13 @@
-config BR2_TARGET_AT91BOOTSTRAP
+menuconfig BR2_TARGET_AT91BOOTSTRAP
 	depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9260DFC || BR2_TARGET_AT91SAM9260PF || \
 	BR2_TARGET_AT91SAM9261EK || BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9XEEK || BR2_TARGET_AT91SAM9G20DFC
 	bool "Build AT91 Bootstrap for selected chip"
 
+if	BR2_TARGET_AT91BOOTSTRAP
+
 config BR2_TARGET_AT91BOOTSTRAP_BOARD
 	string "Bootstrap board"
 	default "$(BOARD_NAME)"
-	depends on BR2_TARGET_AT91BOOTSTRAP
 	help
 	  This is used to do a make <board>_config
 
@@ -16,43 +17,52 @@
 	depends on BR2_TARGET_AT91BOOTSTRAP
 	help
 	  Select Chip for which AT91 bootstrap should be built
-	  Currently supports AT91SAM9260EK, AT91SAM9261EK,
-	  AT91SAM9XEEK, AT981SAM9263EK
 
-
 config BR2_TARGET_AT91BOOT_DATAFLASH
-        depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9261EK || \
-		BR2_TARGET_AT91SAM9XEEK  || BR2_TARGET_AT91SAM9G20DFC
+	bool "AT45 Dataflash"
+	depends on BR2_BOOTSOURCE_DATAFLASH
 
-	bool "Dataflash"
-
 config BR2_TARGET_AT91BOOT_DATAFLASHCARD
-       depends on BR2_TARGET_AT91SAM9260DFC || BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9G20DFC
-	bool "Dataflash Card"
+	bool "AT45 Dataflash Card"
+	depends on BR2_BOOTSOURCE_DATAFLASHCARD
 
 config BR2_TARGET_AT91BOOT_NANDFLASH
-        depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9261EK || BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9G20DFC
 	bool "NAND Flash"
+	depends on BR2_BOOTSOURCE_NANDFLASH
 
 config BR2_TARGET_AT91BOOT_FLASH
-        depends on BR2_TARGET_AT91SAM9XEEK || BR2_TARGET_AT91SAM9260PF
 	bool "Internal Flash or external parallel flash"
+	depends on BR2_BOOTSOURCE_FLASH
 
+config BR2_TARGET_AT91BOOT_SDCARD
+	bool "SD-Card"
+	depends on BR2_BOOTSOURCE_SDCARD
+
+config BR2_TARGET_AT91BOOT_EEPROM
+	bool "EEPROM"
+	depends on BR2_BOOTSOURCE_EEPROM
+
 endchoice
 
 config BR2_TARGET_AT91BOOTSTRAP_MEMORY
 	string
+	depends on BR2_TARGET_AT91BOOTSTRAP
 	default	"dataflash"	if	BR2_TARGET_AT91BOOT_DATAFLASH
 	default	"dataflashcard"	if	BR2_TARGET_AT91BOOT_DATAFLASHCARD
 	default	"nandflash"	if	BR2_TARGET_AT91BOOT_NANDFLASH
 	default	"flash"		if	BR2_TARGET_AT91BOOT_FLASH
+	default	"sdcard"	if	BR2_TARGET_AT91BOOT_SDCARD
+	default	"eeprom"	if	BR2_TARGET_AT91BOOT_EEPROM
 
 config	BR2_AT91BOOTSTRAP_IMG_SIZE
 	string	"Image Size to copy to SDRAM"
-	default	"0x32000"	if	BR2_TARGET_AT91BOOT_DATAFLASH || BR2_TARGET_AT91BOOT_DATAFLASHCARD
+	depends on BR2_TARGET_AT91BOOTSTRAP
+	default	"0x32000"	if	BR2_TARGET_AT91BOOT_DATAFLASH
+	default	"0x32000"	if	BR2_TARGET_AT91BOOT_DATAFLASHCARD
 	default	"0x30000"	if	BR2_TARGET_AT91BOOT_NANDFLASH
 	default	"0x100000"	if	BR2_TARGET_AT91BOOT_FLASH
-	depends on BR2_TARGET_AT91BOOTSTRAP
+	default	"0x30000"	if	BR2_TARGET_AT91BOOT_SDCARD
+	default	"0x30000"	if	BR2_TARGET_AT91BOOT_EEPROM
 	help
 	  Select the size of your application
 	  AT91 Bootstrap will copy this amount from flash to SDRAM
@@ -93,3 +103,7 @@
 comment "It will be copied to $(BR2_AT91BOOTSTRAP_JUMP_ADDR)"
 	depends on BR2_TARGET_AT91BOOTSTRAP
 
+endif
+
+
+

Modified: trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk
===================================================================
--- trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2009-01-29 21:27:51 UTC (rev 25140)
+++ trunk/buildroot/target/device/Atmel/at91bootstrap/at91bootstrap.mk	2009-01-29 21:28:57 UTC (rev 25141)
@@ -3,8 +3,6 @@
 # at91bootstrap
 #
 #############################################################
-#AT91BOOTSTRAP_VERSION:=2.3
-#AT91BOOTSTRAP_PATCH_LEVEL:=.4
 AT91BOOTSTRAP_VERSION:=2.10
 AT91BOOTSTRAP_PATCH_LEVEL:=
 AT91BOOTSTRAP_PATCHED_VERSION:=$(AT91BOOTSTRAP_VERSION)$(AT91BOOTSTRAP_PATCH_LEVEL)

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
@ 2009-02-03  8:23 tigmac
  2009-02-03  8:30 ` Peter Korsgaard
  0 siblings, 1 reply; 14+ messages in thread
From: tigmac @ 2009-02-03  8:23 UTC (permalink / raw)
  To: buildroot

I am afraid that AT91Bootstrap version 2.10 is broken regarding NAND flash.
The main problem being in Makefile:

ifeq ($(CONFIG_NANDFLASH),y)
CPPFLAGS += -DCONFIG_NAND_FLASH
endif

See the extra underscore which should not be there?
Unfortunately this is not the only problem, even if Makefile is corrected,
there is an #include missing
in  driver/nandflash.c causing the compilation to fail. In other words
version 2.10 is buggy like hell,
at least concerning NADN flash.
Unless you are willing to fix it yourself, I recommend using version 2.4.

BTW if I would like to submit a patch for AT91Bootstrap, where should I send
it so that it makes its way
info the official release?
-- 
View this message in context: http://www.nabble.com/svn-commit%3A-trunk-buildroot-target-device-Atmel-at91bootstrap-tp21404604p21805444.html
Sent from the BuildRoot mailing list archive at Nabble.com.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap
  2009-02-03  8:23 tigmac
@ 2009-02-03  8:30 ` Peter Korsgaard
  0 siblings, 0 replies; 14+ messages in thread
From: Peter Korsgaard @ 2009-02-03  8:30 UTC (permalink / raw)
  To: buildroot

>>>>> "tigmac" == tigmac  <chromy@asix.cz> writes:

Hi,

 tigmac> Unfortunately this is not the only problem, even if Makefile
 tigmac> is corrected, there is an #include missing in
 tigmac> driver/nandflash.c causing the compilation to fail. In other
 tigmac> words version 2.10 is buggy like hell, at least concerning
 tigmac> NADN flash.  Unless you are willing to fix it yourself, I
 tigmac> recommend using version 2.4.

Ok. I don't have any at91 hw, so I don't know anything about it.

Ulf, you bumped the at91bootstrap version recently - What's up?

 tigmac> BTW if I would like to submit a patch for AT91Bootstrap,
 tigmac> where should I send it so that it makes its way info the
 tigmac> official release?

Don't know, somewhere at Atmel I guess - Ulf?

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2009-02-03  8:30 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-21 20:13 [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91bootstrap ulf at uclibc.org
  -- strict thread matches above, loose matches on Subject: below --
2009-02-03  8:23 tigmac
2009-02-03  8:30 ` Peter Korsgaard
2009-01-29 21:28 ulf at uclibc.org
2009-01-29 20:52 ulf at uclibc.org
2009-01-11 21:44 ulf at uclibc.org
2009-01-13 17:00 ` Matt Wood
2009-01-15 22:47   ` Ulf Samuelsson
2009-01-06 16:36 ulf at uclibc.org
2008-04-10 21:05 ulf at uclibc.org
2008-03-11 16:19 ninevoltz at uclibc.org
2007-09-24 22:24 ulf at uclibc.org
2007-08-15  9:42 ulf at uclibc.org
2007-07-29  7:09 ulf at uclibc.org

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox