[Buildroot] build for mipsel failed - incompatible ABI

[Buildroot] build for mipsel failed - incompatible ABI

[friedrich Euler]

Hello,

I have a problen with buildroot. I would like to compile it for mipsel
target architecture. I called make menuconfig and than make. The build ends
up with the following error message:

--- begin cut ---
...
make[1]: Entering directory
`/home/friedrich/buildroot-090108/buildroot/toolchain_build_mipsel/uClibc-
0.9.29'
make[2]: `conf' is up to date.
ln -fs sgidefs.h ./include/
:0: error: -march=mips1 is not compatible with the selected ABI
:0: error: -march=mips1 is not compatible with the selected ABI
  CC ldso/ldso/ldso.oS
ldso/ldso/ldso.c:1: error: -march=mips1 is not compatible with the selected
ABI
make[1]: *** [ldso/ldso/ldso.oS] Error 1
make[1]: Leaving directory
`/home/friedrich/buildroot-090108/buildroot/toolchain_build_mipsel/uClibc-
0.9.29'
make: ***
[/home/friedrich/buildroot-090108/buildroot/toolchain_build_mipsel/uClibc-
0.9.29/lib/libc.a] Error 2
--- end cut ---

The problem is that it show this error for all 3 possible ABI options.
Another thing is that i selected mips32 and not mips1 as the target
architecture. I found some other problem descriptions like this one but no
solution. I am using Ubuntu 7.1 as build system.

Any suggestions?


Thanks

friedrich
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://busybox.net/lists/buildroot/attachments/20080110/7d26b956/attachment.htm 

[Buildroot] build for mipsel failed - incompatible ABI

[friedrich Euler]

Hello,

This works now. But fakeroot version 1.8.2 is not available anymore. I thing
it should work after patching fakeroot. I will check this on the weekend.


Thanks

friedrich

On Jan 10, 2008 3:21 PM, Bernhard Fischer <rep.dot.nop@gmail.com> wrote:

> On Thu, Jan 10, 2008 at 09:46:47AM +0100, friedrich Euler wrote:
> >Hello,
> >
> >I have a problen with buildroot. I would like to compile it for mipsel
> >target architecture. I called make menuconfig and than make. The build
> ends
> >up with the following error message:
> >
> >--- begin cut ---
> >...
> >make[1]: Entering directory
>
> >`/home/friedrich/buildroot-090108/buildroot/toolchain_build_mipsel/uClibc-
> >0.9.29'
> >make[2]: `conf' is up to date.
> >ln -fs sgidefs.h ./include/
> >:0: error: -march=mips1 is not compatible with the selected ABI
>
> >The problem is that it show this error for all 3 possible ABI options.
> >Another thing is that i selected mips32 and not mips1 as the target
> >architecture. I found some other problem descriptions like this one but
> no
> >solution. I am using Ubuntu 7.1 as build system.
> >
> >Any suggestions?
>
> If you can reproduce this with
> http://repo.or.cz/w/buildroot.git
>
> then please send me your .config (for both buildroot and uclibc) for me
> to reproduce.
>
> Thanks,
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://busybox.net/lists/buildroot/attachments/20080111/ad082f11/attachment.htm 

[Buildroot] build for mipsel failed - incompatible ABI

[Bernhard Fischer]

On Fri, Jan 11, 2008 at 07:15:54PM +0100, friedrich Euler wrote:
>Hello,
>
>This works now. But fakeroot version 1.8.2 is not available anymore. I thing
>it should work after patching fakeroot. I will check this on the weekend.

Yea, i should update packages/* from svn without pulling in the obvious
mistakes from there and without loosing my improvements. Will not happen
anytime soon, though. I don't have time nor the need to update them.

You could try to copy the whole packages dir from svn instead of using
mine. Not sure what will break then, so beware.

>Thanks

welcome!
cheers,
Bernhard
>
>friedrich
>
>On Jan 10, 2008 3:21 PM, Bernhard Fischer <rep.dot.nop@gmail.com> wrote:
>
>> On Thu, Jan 10, 2008 at 09:46:47AM +0100, friedrich Euler wrote:
>> >Hello,
>> >
>> >I have a problen with buildroot. I would like to compile it for mipsel
>> >target architecture. I called make menuconfig and than make. The build
>> ends
>> >up with the following error message:
>> >
>> >--- begin cut ---
>> >...
>> >make[1]: Entering directory
>>
>> >`/home/friedrich/buildroot-090108/buildroot/toolchain_build_mipsel/uClibc-
>> >0.9.29'
>> >make[2]: `conf' is up to date.
>> >ln -fs sgidefs.h ./include/
>> >:0: error: -march=mips1 is not compatible with the selected ABI
>>
>> >The problem is that it show this error for all 3 possible ABI options.
>> >Another thing is that i selected mips32 and not mips1 as the target
>> >architecture. I found some other problem descriptions like this one but
>> no
>> >solution. I am using Ubuntu 7.1 as build system.
>> >
>> >Any suggestions?
>>
>> If you can reproduce this with
>> http://repo.or.cz/w/buildroot.git
>>
>> then please send me your .config (for both buildroot and uclibc) for me
>> to reproduce.
>>
>> Thanks,
>>

>_______________________________________________
>buildroot mailing list
>buildroot at uclibc.org
>http://busybox.net/mailman/listinfo/buildroot