* [Buildroot] svn commit: trunk/buildroot/package: atk cairo libglib2 libgtk2 pango
@ 2008-05-01 14:07 ninevoltz at uclibc.org
0 siblings, 0 replies; only message in thread
From: ninevoltz at uclibc.org @ 2008-05-01 14:07 UTC (permalink / raw)
To: buildroot
Author: ninevoltz
Date: 2008-05-01 07:07:11 -0700 (Thu, 01 May 2008)
New Revision: 21906
Log:
remove unnecessary libdir-la.patch patches and modify Makefile.autotools.in to patch libtool automatically.
Added:
trunk/buildroot/package/buildroot-libtool.patch
Removed:
trunk/buildroot/package/atk/atk-1.9.1-libdir-la.patch
trunk/buildroot/package/cairo/cairo-1.4.14-libdir-la.patch
trunk/buildroot/package/libglib2/libglib2-2.15.4-libdir-la.patch
trunk/buildroot/package/libgtk2/libgtk2-2.12.6-libdir-la.patch
trunk/buildroot/package/pango/pango-1.19.3-libdir-la.patch
Modified:
trunk/buildroot/package/Makefile.autotools.in
Changeset:
Modified: trunk/buildroot/package/Makefile.autotools.in
===================================================================
--- trunk/buildroot/package/Makefile.autotools.in 2008-05-01 14:03:20 UTC (rev 21905)
+++ trunk/buildroot/package/Makefile.autotools.in 2008-05-01 14:07:11 UTC (rev 21906)
@@ -142,7 +142,12 @@
$(Q)mkdir -p $(@D)
$(Q)$(INFLATE$(suffix $($(PKG)_SOURCE))) $(DL_DIR)/$($(PKG)_SOURCE) | \
$(TAR) --strip-components=1 -C $(@D) $(TAR_OPTIONS) -
- chmod -R ug+rw $(@D)
+# some packages have messed up permissions inside
+ $(Q)chmod -R ug+rw $(@D)
+# if the package uses libtool, patch it for cross-compiling in buildroot
+ for i in `find $(@D) -name ltmain.sh`; do \
+ toolchain/patch-kernel.sh $${i%/*} package buildroot-libtool.patch; \
+ done
$(Q)touch $@
# Patch
@@ -185,6 +190,9 @@
$(call MESSAGE,"Configuring")
$(Q)if test "$($(PKG)_AUTORECONF)" = "YES"; then \
cd $(@D)/$($(PKG)_SUBDIR) && $(AUTORECONF); \
+ for i in `find $(@D)/$($(PKG)_SUBDIR) -name ltmain.sh`; do \
+ ../../toolchain/patch-kernel.sh $${i%/*} ../../package buildroot-libtool.patch; \
+ done \
fi
cd $(@D)/$($(PKG)_SUBDIR) && rm -f config.cache && \
$(TARGET_CONFIGURE_OPTS) \
Deleted: trunk/buildroot/package/atk/atk-1.9.1-libdir-la.patch
===================================================================
--- trunk/buildroot/package/atk/atk-1.9.1-libdir-la.patch 2008-05-01 14:03:20 UTC (rev 21905)
+++ trunk/buildroot/package/atk/atk-1.9.1-libdir-la.patch 2008-05-01 14:07:11 UTC (rev 21906)
@@ -1,77 +0,0 @@
---- atk-1.9.1/ltmain.sh.orig 2004-11-23 09:19:19.000000000 -0700
-+++ atk-1.9.1/ltmain.sh 2007-01-13 14:36:53.000000000 -0700
-@@ -231,8 +231,9 @@
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
-- $echo "$modename: specify a tag with \`--tag'" 1>&2
-- exit $EXIT_FAILURE
-+ $echo "$modename: defaulting to \`CC'"
-+ $echo "$modename: if this is not correct, specify a tag with \`--tag'"
-+# exit $EXIT_FAILURE
- # else
- # $echo "$modename: using $tagname tagged configuration"
- fi
-@@ -2279,8 +2280,14 @@
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
-- dir="$libdir"
-- absdir="$libdir"
-+ # Adding 'libdir' from the .la file to our library search paths
-+ # breaks crosscompilation horribly. We cheat here and don't add
-+ # it, instead adding the path where we found the .la. -CL
-+ dir="$abs_ladir"
-+ absdir="$abs_ladir"
-+ libdir="$abs_ladir"
-+ #dir="$libdir"
-+ #absdir="$libdir"
- fi
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-@@ -2754,6 +2761,16 @@
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
-+# This interferes with crosscompilation. -CL
-+# else
-+# eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+# if test -z "$libdir"; then
-+# $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-+# exit 1
-+# fi
-+# if test "$absdir" != "$libdir"; then
-+# $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-+# fi
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
-@@ -5141,6 +5158,10 @@
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
-+ # Replacing uninstalled with installed can easily break crosscompilation,
-+ # since the installed path is generally the wrong architecture. -CL
-+ newdependency_libs="$newdependency_libs $deplib"
-+ continue
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-@@ -5459,10 +5480,13 @@
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
-- if test "$inst_prefix_dir" = "$destdir"; then
-- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-- exit $EXIT_FAILURE
-- fi
-+ #
-+ # This breaks install into our staging area. -PB
-+ #
-+ # if test "$inst_prefix_dir" = "$destdir"; then
-+ # $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-+ # exit $EXIT_FAILURE
-+ # fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
Added: trunk/buildroot/package/buildroot-libtool.patch
===================================================================
--- trunk/buildroot/package/buildroot-libtool.patch (rev 0)
+++ trunk/buildroot/package/buildroot-libtool.patch 2008-05-01 14:07:11 UTC (rev 21906)
@@ -0,0 +1,86 @@
+--- a/ltmain.sh 2006-03-11 13:49:04.000000000 -0500
++++ b/ltmain.sh 2008-04-30 09:55:28.000000000 -0400
+@@ -273,8 +273,9 @@ func_infer_tag ()
+ # line option must be used.
+ if test -z "$tagname"; then
+ $echo "$modename: unable to infer tagged configuration"
+- $echo "$modename: specify a tag with \`--tag'" 1>&2
+- exit $EXIT_FAILURE
++ $echo "$modename: defaulting to \`CC'"
++ $echo "$modename: if this is not correct, specify a tag with \`--tag'"
++# exit $EXIT_FAILURE
+ # else
+ # $echo "$modename: using $tagname tagged configuration"
+ fi
+@@ -2407,8 +2408,14 @@ EOF
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+- dir="$libdir"
+- absdir="$libdir"
++ # Adding 'libdir' from the .la file to our library search paths
++ # breaks crosscompilation horribly. We cheat here and don't add
++ # it, instead adding the path where we found the .la. -CL
++ dir="$abs_ladir"
++ absdir="$abs_ladir"
++ libdir="$abs_ladir"
++ #dir="$libdir"
++ #absdir="$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+@@ -2545,7 +2552,7 @@ EOF
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ if test "$installed" = no; then
+ notinst_deplibs="$notinst_deplibs $lib"
+- need_relink=yes
++ need_relink=no
+ fi
+ # This is a shared library
+
+@@ -2889,6 +2896,16 @@ EOF
+ esac
+ if grep "^installed=no" $deplib > /dev/null; then
+ path="$absdir/$objdir"
++# This interferes with crosscompilation. -CL
++# else
++# eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++# if test -z "$libdir"; then
++# $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
++# exit 1
++# fi
++# if test "$absdir" != "$libdir"; then
++# $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
++# fi
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+@@ -5606,6 +5623,10 @@ fi\
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
++ # Replacing uninstalled with installed can easily break crosscompilation,
++ # since the installed path is generally the wrong architecture. -CL
++ newdependency_libs="$newdependency_libs $deplib"
++ continue
+ case $deplib in
+ *.la)
+ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+@@ -5927,10 +5948,13 @@ relink_command=\"$relink_command\""
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+- if test "$inst_prefix_dir" = "$destdir"; then
+- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+- exit $EXIT_FAILURE
+- fi
++ #
++ # This breaks install into our staging area. -PB
++ #
++ # if test "$inst_prefix_dir" = "$destdir"; then
++ # $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
++ # exit $EXIT_FAILURE
++ # fi
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
Deleted: trunk/buildroot/package/cairo/cairo-1.4.14-libdir-la.patch
===================================================================
--- trunk/buildroot/package/cairo/cairo-1.4.14-libdir-la.patch 2008-05-01 14:03:20 UTC (rev 21905)
+++ trunk/buildroot/package/cairo/cairo-1.4.14-libdir-la.patch 2008-05-01 14:07:11 UTC (rev 21906)
@@ -1,77 +0,0 @@
---- cairo/ltmain.sh.orig 2004-11-23 09:19:19.000000000 -0700
-+++ cairo/ltmain.sh 2007-01-13 14:36:53.000000000 -0700
-@@ -231,8 +231,9 @@
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
-- $echo "$modename: specify a tag with \`--tag'" 1>&2
-- exit $EXIT_FAILURE
-+ $echo "$modename: defaulting to \`CC'"
-+ $echo "$modename: if this is not correct, specify a tag with \`--tag'"
-+# exit $EXIT_FAILURE
- # else
- # $echo "$modename: using $tagname tagged configuration"
- fi
-@@ -2279,8 +2280,14 @@
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
-- dir="$libdir"
-- absdir="$libdir"
-+ # Adding 'libdir' from the .la file to our library search paths
-+ # breaks crosscompilation horribly. We cheat here and don't add
-+ # it, instead adding the path where we found the .la. -CL
-+ dir="$abs_ladir"
-+ absdir="$abs_ladir"
-+ libdir="$abs_ladir"
-+ #dir="$libdir"
-+ #absdir="$libdir"
- fi
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-@@ -2754,6 +2761,16 @@
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
-+# This interferes with crosscompilation. -CL
-+# else
-+# eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+# if test -z "$libdir"; then
-+# $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-+# exit 1
-+# fi
-+# if test "$absdir" != "$libdir"; then
-+# $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-+# fi
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
-@@ -5141,6 +5158,10 @@
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
-+ # Replacing uninstalled with installed can easily break crosscompilation,
-+ # since the installed path is generally the wrong architecture. -CL
-+ newdependency_libs="$newdependency_libs $deplib"
-+ continue
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-@@ -5459,10 +5480,13 @@
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
-- if test "$inst_prefix_dir" = "$destdir"; then
-- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-- exit $EXIT_FAILURE
-- fi
-+ #
-+ # This breaks install into our staging area. -PB
-+ #
-+ # if test "$inst_prefix_dir" = "$destdir"; then
-+ # $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-+ # exit $EXIT_FAILURE
-+ # fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
Deleted: trunk/buildroot/package/libglib2/libglib2-2.15.4-libdir-la.patch
===================================================================
--- trunk/buildroot/package/libglib2/libglib2-2.15.4-libdir-la.patch 2008-05-01 14:03:20 UTC (rev 21905)
+++ trunk/buildroot/package/libglib2/libglib2-2.15.4-libdir-la.patch 2008-05-01 14:07:11 UTC (rev 21906)
@@ -1,77 +0,0 @@
---- glib/ltmain.sh.orig 2006-07-13 01:12:13.000000000 -0600
-+++ glib/ltmain.sh 2007-01-13 13:59:13.000000000 -0700
-@@ -283,8 +283,9 @@
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
-- $echo "$modename: specify a tag with \`--tag'" 1>&2
-- exit $EXIT_FAILURE
-+ $echo "$modename: defaulting to \`CC'"
-+ $echo "$modename: if this is not correct, specify a tag with \`--tag'"
-+# exit $EXIT_FAILURE
- # else
- # $echo "$modename: using $tagname tagged configuration"
- fi
-@@ -2434,8 +2435,14 @@
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
-- dir="$libdir"
-- absdir="$libdir"
-+ # Adding 'libdir' from the .la file to our library search paths
-+ # breaks crosscompilation horribly. We cheat here and don't add
-+ # it, instead adding the path where we found the .la. -CL
-+ dir="$abs_ladir"
-+ absdir="$abs_ladir"
-+ libdir="$abs_ladir"
-+ #dir="$libdir"
-+ #absdir="$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
-@@ -2918,6 +2925,16 @@
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
-+# This interferes with crosscompilation. -CL
-+# else
-+# eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+# if test -z "$libdir"; then
-+# $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-+# exit 1
-+# fi
-+# if test "$absdir" != "$libdir"; then
-+# $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-+# fi
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
-@@ -5641,6 +5658,10 @@
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
-+ # Replacing uninstalled with installed can easily break crosscompilation,
-+ # since the installed path is generally the wrong architecture. -CL
-+ newdependency_libs="$newdependency_libs $deplib"
-+ continue
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-@@ -5962,10 +5983,13 @@
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
-- if test "$inst_prefix_dir" = "$destdir"; then
-- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-- exit $EXIT_FAILURE
-- fi
-+ #
-+ # This breaks install into our staging area. -PB
-+ #
-+ # if test "$inst_prefix_dir" = "$destdir"; then
-+ # $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-+ # exit $EXIT_FAILURE
-+ # fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
Deleted: trunk/buildroot/package/libgtk2/libgtk2-2.12.6-libdir-la.patch
===================================================================
--- trunk/buildroot/package/libgtk2/libgtk2-2.12.6-libdir-la.patch 2008-05-01 14:03:20 UTC (rev 21905)
+++ trunk/buildroot/package/libgtk2/libgtk2-2.12.6-libdir-la.patch 2008-05-01 14:07:11 UTC (rev 21906)
@@ -1,77 +0,0 @@
---- gtk/ltmain.sh.orig 2004-11-23 09:19:19.000000000 -0700
-+++ gtk/ltmain.sh 2007-01-13 14:36:53.000000000 -0700
-@@ -231,8 +231,9 @@
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
-- $echo "$modename: specify a tag with \`--tag'" 1>&2
-- exit $EXIT_FAILURE
-+ $echo "$modename: defaulting to \`CC'"
-+ $echo "$modename: if this is not correct, specify a tag with \`--tag'"
-+# exit $EXIT_FAILURE
- # else
- # $echo "$modename: using $tagname tagged configuration"
- fi
-@@ -2279,8 +2280,14 @@
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
-- dir="$libdir"
-- absdir="$libdir"
-+ # Adding 'libdir' from the .la file to our library search paths
-+ # breaks crosscompilation horribly. We cheat here and don't add
-+ # it, instead adding the path where we found the .la. -CL
-+ dir="$abs_ladir"
-+ absdir="$abs_ladir"
-+ libdir="$abs_ladir"
-+ #dir="$libdir"
-+ #absdir="$libdir"
- fi
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-@@ -2754,6 +2761,16 @@
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
-+# This interferes with crosscompilation. -CL
-+# else
-+# eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+# if test -z "$libdir"; then
-+# $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-+# exit 1
-+# fi
-+# if test "$absdir" != "$libdir"; then
-+# $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-+# fi
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
-@@ -5141,6 +5158,10 @@
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
-+ # Replacing uninstalled with installed can easily break crosscompilation,
-+ # since the installed path is generally the wrong architecture. -CL
-+ newdependency_libs="$newdependency_libs $deplib"
-+ continue
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-@@ -5459,10 +5480,13 @@
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
-- if test "$inst_prefix_dir" = "$destdir"; then
-- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-- exit $EXIT_FAILURE
-- fi
-+ #
-+ # This breaks install into our staging area. -PB
-+ #
-+ # if test "$inst_prefix_dir" = "$destdir"; then
-+ # $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-+ # exit $EXIT_FAILURE
-+ # fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
Deleted: trunk/buildroot/package/pango/pango-1.19.3-libdir-la.patch
===================================================================
--- trunk/buildroot/package/pango/pango-1.19.3-libdir-la.patch 2008-05-01 14:03:20 UTC (rev 21905)
+++ trunk/buildroot/package/pango/pango-1.19.3-libdir-la.patch 2008-05-01 14:07:11 UTC (rev 21906)
@@ -1,77 +0,0 @@
---- pango/ltmain.sh.orig 2004-11-23 09:19:19.000000000 -0700
-+++ pango/ltmain.sh 2007-01-13 14:36:53.000000000 -0700
-@@ -231,8 +231,9 @@
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
-- $echo "$modename: specify a tag with \`--tag'" 1>&2
-- exit $EXIT_FAILURE
-+ $echo "$modename: defaulting to \`CC'"
-+ $echo "$modename: if this is not correct, specify a tag with \`--tag'"
-+# exit $EXIT_FAILURE
- # else
- # $echo "$modename: using $tagname tagged configuration"
- fi
-@@ -2279,8 +2280,14 @@
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
-- dir="$libdir"
-- absdir="$libdir"
-+ # Adding 'libdir' from the .la file to our library search paths
-+ # breaks crosscompilation horribly. We cheat here and don't add
-+ # it, instead adding the path where we found the .la. -CL
-+ dir="$abs_ladir"
-+ absdir="$abs_ladir"
-+ libdir="$abs_ladir"
-+ #dir="$libdir"
-+ #absdir="$libdir"
- fi
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-@@ -2754,6 +2761,16 @@
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
-+# This interferes with crosscompilation. -CL
-+# else
-+# eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+# if test -z "$libdir"; then
-+# $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-+# exit 1
-+# fi
-+# if test "$absdir" != "$libdir"; then
-+# $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-+# fi
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
-@@ -5141,6 +5158,10 @@
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
-+ # Replacing uninstalled with installed can easily break crosscompilation,
-+ # since the installed path is generally the wrong architecture. -CL
-+ newdependency_libs="$newdependency_libs $deplib"
-+ continue
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-@@ -5459,10 +5480,13 @@
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
-- if test "$inst_prefix_dir" = "$destdir"; then
-- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-- exit $EXIT_FAILURE
-- fi
-+ #
-+ # This breaks install into our staging area. -PB
-+ #
-+ # if test "$inst_prefix_dir" = "$destdir"; then
-+ # $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-+ # exit $EXIT_FAILURE
-+ # fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-05-01 14:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-05-01 14:07 [Buildroot] svn commit: trunk/buildroot/package: atk cairo libglib2 libgtk2 pango ninevoltz at uclibc.org
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox