[Buildroot] DBUS keeps getting installed...

[Buildroot] DBUS keeps getting installed...

[Lloyd Sargent]

Okay, I'm really puzzled. In my initial build I had DBUS. Well, it was taking 
too many resources so I removed it.

Or so I thought.

In my next build, there was DBUS again!

So I checked the .config file:

# BR2_PACKAGE_DBUS is not set

Perhaps I misread something, but I was under the impression that if DBUS was 
not set, then it wouldn't be included in the build?

Any help would be appreciated. This has been going on for the last 20 or 30 
builds.

Cheers,

Lloyd

[Buildroot] DBUS keeps getting installed...

[sjhill at realitydiluted.com]

> Perhaps I misread something, but I was under the impression that if DBUS was 
> not set, then it wouldn't be included in the build?
> 
So, did you select HAL to build? You could grep for 'dbus' in packages/*/*.mk
to see what packages depend on dbus being built.

Steve

[Buildroot] DBUS keeps getting installed...

[Lloyd Sargent]

On Wednesday 08 April 2009 12:47:42 sjhill at realitydiluted.com wrote:
> > Perhaps I misread something, but I was under the impression that if DBUS
> > was not set, then it wouldn't be included in the build?
>
> So, did you select HAL to build? You could grep for 'dbus' in
> packages/*/*.mk to see what packages depend on dbus being built.

# BR2_PACKAGE_HAL is not set

I grep'ed for dbus and found nothing that I am building.

I'm really puzzled on this.

Cheers,

Lloyd

[Buildroot] DBUS keeps getting installed...

[Thomas Petazzoni]

Le Wed, 8 Apr 2009 12:13:21 -0500,
Lloyd Sargent <lsargent@txdigital.com> a ?crit :

> Perhaps I misread something, but I was under the impression that if
> DBUS was not set, then it wouldn't be included in the build?
> 
> Any help would be appreciated. This has been going on for the last 20
> or 30 builds.

What does your .config contains (not only the BR2_PACKAGE_DBUS line) ?

There are two dependy mechanisms in Buildroot, which can sometimes get
confusing :

 * The Kconfig dependency stuff ;
 * The makefile dependency stuff.

In your case, it is possible that a package depends on dbus being built
in its .mk file, but that dependency is not visible in the Kconfig
stuff. After a quick look, I don't see for which package that could the
case, but maybe I missed something.

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com

[Buildroot] DBUS keeps getting installed...

[Lloyd Sargent]

On Wednesday 08 April 2009 12:58:58 Thomas Petazzoni wrote:
> Le Wed, 8 Apr 2009 12:13:21 -0500,
>
> Lloyd Sargent <lsargent@txdigital.com> a ?crit :
> > Perhaps I misread something, but I was under the impression that if
> > DBUS was not set, then it wouldn't be included in the build?
> >
> > Any help would be appreciated. This has been going on for the last 20
> > or 30 builds.
>
> What does your .config contains (not only the BR2_PACKAGE_DBUS line) ?
>
> There are two dependy mechanisms in Buildroot, which can sometimes get
> confusing :
>
>  * The Kconfig dependency stuff ;
>  * The makefile dependency stuff.
>
> In your case, it is possible that a package depends on dbus being built
> in its .mk file, but that dependency is not visible in the Kconfig
> stuff. After a quick look, I don't see for which package that could the
> case, but maybe I missed something.

Thanks!

Yeah, I grep'ed all the .mk files and didn't find one that I was including.

These are the ones that MENTION dbus somewhere in the .mk file:

avahi/avahi.mk
cups/cups.mk
dbus/dbus.mk
dbus-glib/dbus-glib.mk
dnsmasq/dnsmasq.mk
hal/hal.mk
kismet/kismet.mk
qtopia4/qtopia4.mk

Here is the .config in it's entirety:

#
# Automatically generated make config: don't edit
# Tue Apr  7 10:06:05 2009
#
BR2_HAVE_DOT_CONFIG=y
BR2_VERSION="2009.02"
# BR2_alpha is not set
BR2_arm=y
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_cris is not set
# BR2_ia64 is not set
# BR2_i386 is not set
# BR2_m68k is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_nios2 is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_sparc64 is not set
# BR2_x86_64 is not set
BR2_generic_arm=y
# BR2_arm7tdmi is not set
# BR2_arm610 is not set
# BR2_arm710 is not set
# BR2_arm720t is not set
# BR2_arm920t is not set
# BR2_arm922t is not set
# BR2_arm926t is not set
# BR2_arm10t is not set
# BR2_arm1136jf_s is not set
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set
# BR2_sa110 is not set
# BR2_sa1100 is not set
# BR2_xscale is not set
# BR2_iwmmxt is not set
BR2_ARM_TYPE="GENERIC_ARM"
BR2_ARM_OABI=y
# BR2_ARM_EABI is not set
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_ABI="apcs-gnu"

#
# Target options
#

#
# Project Options
#
BR2_PROJECT="at91sam9261ek"
BR2_HOSTNAME="AT91SAM9261EK"
BR2_BANNER="Welcome to the Erik's uClibc development environment running on an 
AT91SAM9261EK"

#
# Preset Devices
#
# BR2_TARGET_ARMLTD is not set
BR2_BOARD_NAME="at91sam9261ek"
BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
BR2_TARGET_ATMEL=y

#
# Atmel AT91 Specific Device Support
#
BR2_TARGET_AT91=y

#
# Selection criteria
#
BR2_TARGET_ATMEL_ALL=y

#
# Device Selection
#
# BR2_TARGET_AT91RM9200 is not set
# BR2_TARGET_AT91SAM9260 is not set
# BR2_TARGET_AT91SAM9G20 is not set
BR2_TARGET_AT91SAM9261=y
# BR2_TARGET_AT91SAM9261S is not set
# BR2_TARGET_AT91SAM9RL64 is not set
# BR2_TARGET_AT91SAM9263 is not set
# BR2_TARGET_AT91SAM9G40 is not set
# BR2_TARGET_AT91SAM9M10 is not set
# BR2_TARGET_AT91SAM9M11 is not set
# BR2_TARGET_AT91SAM9XE is not set
# BR2_TARGET_AT572D940HF is not set
# BR2_TARGET_AT91CAP9 is not set

#
# Development Board Selection
#
# BR2_TARGET_AT91RM9200DF is not set
# BR2_TARGET_AT91RM9200EK is not set
# BR2_TARGET_AT91RM9200DK is not set
# BR2_TARGET_AT91SAM9260DFC is not set
# BR2_TARGET_AT91SAM9260EK is not set
# BR2_TARGET_AT91SAM9G20DFC is not set
# BR2_TARGET_AT91SAM9G20EK is not set
# BR2_TARGET_AT91SAM9XEEK is not set
BR2_TARGET_AT91SAM9261EK=y
# BR2_TARGET_AT91SAM9RL64EK is not set
# BR2_TARGET_AT91SAM9263EK is not set
# BR2_TARGET_AT572D940DCM is not set
# BR2_TARGET_AT91CAP9DK is not set
# BR2_TARGET_AT91CAP9ADK is not set
BR2_TARGET_AT91SAM9261EK_SPIMODE0=y
# BR2_TARGET_AT91SAM9261EK_SPIMODE3 is not set
# BR2_TARGET_AT91_ADVANCED_INFO is not set

#
# Package support
#

#
# Secondary locations
#
BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
BR2_TARGET_ATMEL_COPYTO="/tftpboot"
# BR2_TARGET_DATAFLASHBOOT is not set
BR2_TARGET_AT91BOOTSTRAP=y
BR2_TARGET_AT91BOOTSTRAP_BOARD="$(BOARD_NAME)"
BR2_TARGET_AT91BOOT_DATAFLASH=y
# BR2_TARGET_AT91BOOT_DATAFLASHCARD is not set
# BR2_TARGET_AT91BOOT_NANDFLASH is not set
# BR2_TARGET_AT91BOOT_FLASH is not set
# BR2_TARGET_AT91BOOT_SDCARD is not set
# BR2_TARGET_AT91BOOT_EEPROM is not set
BR2_TARGET_AT91BOOTSTRAP_MEMORY="dataflash"
BR2_AT91BOOTSTRAP_IMG_SIZE="0x32000"
BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT=y
# BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM is not set
# BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM is not set
BR2_AT91BOOTSTRAP_JUMP_ADDR="0x23F00000"

#
# It will be copied to $(BR2_AT91BOOTSTRAP_JUMP_ADDR)
#
# BR2_TARGET_KWIKBYTE is not set
BR2_KERNEL_ARCH_PATCH_VERSION="2.6.28"
BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"

#
# Generic System Support
#
# BR2_TARGET_GENERIC_ACCESS_POINT is not set
# BR2_TARGET_GENERIC_FIREWALL is not set
# BR2_TARGET_GENERIC_DEV_SYSTEM is not set

#
# Build options
#
BR2_WGET="wget --passive-ftp"
BR2_SVN_CO="svn co"
BR2_SVN_UP="svn up"
BR2_GIT="git clone"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(BASE_DIR)/dl"
BR2_COPYTO=""

#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://buildroot.uclibc.org/downloads/sources/"
BR2_SOURCEFORGE_MIRROR="easynews"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"

#
# Atmel Mirrors
#
BR2_ATMEL_MIRROR="ftp://www.at91.com/pub/buildroot"
BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
# BR2_FPU_SUFFIX is not set
BR2_TOPDIR_PREFIX=""
BR2_TOPDIR_SUFFIX=""
BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
BR2_GNU_TARGET_SUFFIX="linux-uclibc"
BR2_JLEVEL=2
# BR2_PREFER_IMA is not set
# BR2_DEPRECATED is not set
BR2_RECENT=y
BR2_CONFIG_CACHE=y
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_MANPAGES is not set
# BR2_HAVE_INFOPAGES is not set
# BR2_HAVE_DOCUMENTATION is not set
# BR2_HAVE_DEVFILES is not set
BR2_UPDATE_CONFIG=y

#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
# BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set
BR2_TOOLCHAIN_SOURCE=y
BR2_EXT_GCC_VERSION_4_1_2=y
BR2_EXT_GCC_VERSION_4_2_1=y
BR2_EXT_GCC_VERSION_4_2_2=y
BR2_EXT_GCC_VERSION_4_2_3=y
BR2_EXT_BINUTILS_VERSION_2_17=y
BR2_EXT_BINUTILS_VERSION_2_18=y
BR2_EXT_UCLIBC_VERSION_0_9_28_3=y
BR2_EXT_UCLIBC_VERSION_0_9_29=y
BR2_EXT_UCLIBC_VERSION_0_9_30=y

#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_2_4_31 is not set
# BR2_KERNEL_HEADERS_2_6_20_4 is not set
# BR2_KERNEL_HEADERS_2_6_20 is not set
# BR2_KERNEL_HEADERS_2_6_21_5 is not set
# BR2_KERNEL_HEADERS_2_6_21 is not set
# BR2_KERNEL_HEADERS_2_6_22_1 is not set
# BR2_KERNEL_HEADERS_2_6_22_10 is not set
# BR2_KERNEL_HEADERS_2_6_22 is not set
# BR2_KERNEL_HEADERS_2_6_23 is not set
# BR2_KERNEL_HEADERS_2_6_24 is not set
# BR2_KERNEL_HEADERS_2_6_25 is not set
# BR2_KERNEL_HEADERS_2_6_26 is not set
# BR2_KERNEL_HEADERS_2_6_27 is not set
BR2_KERNEL_HEADERS_2_6_28=y
# BR2_KERNEL_HEADERS_SNAP is not set
# BR2_KERNEL_HEADERS_PATCH_DIR is not set
BR2_DEFAULT_KERNEL_HEADERS="2.6.28.4"

#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_28_3 is not set
# BR2_UCLIBC_VERSION_0_9_29 is not set
BR2_UCLIBC_VERSION_0_9_30=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.30.config"
# BR2_PTHREAD_DEBUG is not set
BR2_UCLIBC_PROGRAM_INVOCATION=y
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set

#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_17 is not set
# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
# BR2_BINUTILS_VERSION_2_18 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_3 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_6 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_8 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_9 is not set
BR2_BINUTILS_VERSION_2_19=y
BR2_BINUTILS_VERSION="2.19"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""

#
# GCC Options
#
# BR2_GCC_VERSION_3_4_6 is not set
# BR2_GCC_VERSION_4_0_4 is not set
# BR2_GCC_VERSION_4_1_2 is not set
# BR2_GCC_VERSION_4_2_1 is not set
# BR2_GCC_VERSION_4_2_2 is not set
# BR2_GCC_VERSION_4_2_3 is not set
# BR2_GCC_VERSION_4_2_4 is not set
# BR2_GCC_VERSION_4_3_1 is not set
BR2_GCC_VERSION_4_3_2=y
BR2_GCC_SUPPORTS_SYSROOT=y
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.3.2"
BR2_TOOLCHAIN_SYSROOT=y
# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_GCC_CROSS_FORTRAN is not set
# BR2_INSTALL_LIBGCJ is not set
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_SHARED_LIBGCC=y

#
# Ccache Options
#
BR2_CCACHE=y
BR2_CCACHE_DIR="$(TOOL_BUILD_DIR)/ccache-$(CCACHE_VER)/cache"

#
# Gdb Options
#
# BR2_PACKAGE_GDB is not set
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set

#
# Common Toolchain Options
#
BR2_LARGEFILE=y
BR2_INET_IPV6=y
BR2_INET_RPC=y
BR2_ENABLE_LOCALE=y
# BR2_ENABLE_LOCALE_PREGENERATED is not set
BR2_USE_WCHAR=y
# BR2_SOFT_FLOAT is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
BR2_PTHREADS_OLD=y
# BR2_PTHREADS_NATIVE is not set
BR2_GCC_CROSS_CXX=y
BR2_INSTALL_LIBSTDCPP=y
BR2_TARGET_OPTIMIZATION="-Os -pipe"
# BR2_ELF2FLT is not set
# BR2_MKLIBS is not set
# BR2_PACKAGE_SSTRIP_TARGET is not set
BR2_PACKAGE_SSTRIP_HOST=y
# BR2_ENABLE_MULTILIB is not set
# BR2_VFP_FLOAT is not set
BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y

#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
# BR2_BUSYBOX_VERSION_1_6_1 is not set
# BR2_BUSYBOX_VERSION_1_7_X is not set
# BR2_BUSYBOX_VERSION_1_8_X is not set
# BR2_BUSYBOX_VERSION_1_9_X is not set
# BR2_BUSYBOX_VERSION_1_10_X is not set
# BR2_BUSYBOX_VERSION_1_11_X is not set
# BR2_BUSYBOX_VERSION_1_12_X is not set
BR2_BUSYBOX_VERSION_1_13_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.13.2"
BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
# BR2_PACKAGE_BUSYBOX_SKELETON is not set

#
# The minimum needed to build a uClibc development system
#
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GCC_TARGET is not set
# BR2_PACKAGE_MAKE is not set

#
# Other development stuff
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_CCACHE_TARGET is not set
# BR2_PACKAGE_CVS is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
# BR2_PACKAGE_LIBGMP is not set
# BR2_PACKAGE_GPERF is not set
# BR2_PACKAGE_LIBMPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set
# BR2_PACKAGE_OPROFILE is not set
BR2_PACKAGE_PKGCONFIG=y
BR2_PACKAGE_READLINE=y
# BR2_PACKAGE_PCRE is not set

#
# Other stuff
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_BEECRYPT is not set
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_CUSTOMIZE is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GAMIN is not set
BR2_PACKAGE_ICU=y
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
# BR2_PACKAGE_LIBICONV is not set
# BR2_PACKAGE_LIBIDN is not set
BR2_PACKAGE_LIBLOCKFILE=y
BR2_PACKAGE_LIBOIL=y
# BR2_PACKAGE_LIBSYSFS is not set
BR2_PACKAGE_LOCKFILE_PROGS=y
# BR2_PACKAGE_LOGROTATE is not set
# BR2_PACKAGE_LSOF is not set
# BR2_PACKAGE_LTP-TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_NG_SPICE_REWORK is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_SUDO is not set

#
# Database
#
# BR2_PACKAGE_MYSQL_CLIENT is not set
# BR2_PACKAGE_SQLITE is not set

#
# Networking
#

#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
# BR2_PACKAGE_BIND is not set
# BR2_PACKAGE_BRIDGE is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_IFPLUGD is not set
# BR2_PACKAGE_IPERF is not set
# BR2_PACKAGE_IPROUTE2 is not set

#
# ipsec-tools   - disabled (requires openssl, flex and the flex library 
(libfl.a) )
#
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_KISMET is not set
# BR2_PACKAGE_L2TP is not set
# BR2_PACKAGE_LIBCGI is not set
# BR2_PACKAGE_LIBCGICC is not set
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBUPNP is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MDNSRESPONDER is not set
# BR2_PACKAGE_MICROCOM is not set
# BR2_PACKAGE_MIIDIAG is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set
BR2_PACKAGE_NCFTP=y

#
# ncFTP tools selection
#
BR2_PACKAGE_NCFTP_GET=y
BR2_PACKAGE_NCFTP_PUT=y
BR2_PACKAGE_NCFTP_LS=y
BR2_PACKAGE_NCFTP_BATCH=y
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_NETKITBASE is not set
# BR2_PACKAGE_NETKITTELNET is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NFS_UTILS is not set
BR2_PACKAGE_NTP=y
# BR2_PACKAGE_NTP_SNTP is not set
# BR2_PACKAGE_OLSR is not set
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
# BR2_PACKAGE_OPENSSL is not set
# BR2_PACKAGE_OPENVPN is not set
# BR2_PACKAGE_OPENSWAN is not set
BR2_PACKAGE_PORTMAP=y
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_RADVD is not set
# BR2_PACKAGE_RP_PPPOE is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set

#
# quagga suite
#
# BR2_PACKAGE_QUAGGA_ZEBRA is not set
# BR2_PACKAGE_QUAGGA_BGPD is not set
# BR2_PACKAGE_QUAGGA_RIPD is not set
# BR2_PACKAGE_QUAGGA_RIPNGD is not set
# BR2_PACKAGE_QUAGGA_OSPFD is not set
# BR2_PACKAGE_QUAGGA_OSPF6D is not set
# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
# BR2_PACKAGE_QUAGGA_ISISD is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_SAMBA is not set
BR2_PACKAGE_SOCAT=y
BR2_PACKAGE_SOCAT_PREDEF_CRDLY_SHIFT="9"
BR2_PACKAGE_SOCAT_PREDEF_TABDLY_SHIFT="11"
BR2_PACKAGE_SOCAT_PREDEF_CSIZE_SHIFT="4"
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_TFTPD is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set
# BR2_PACKAGE_UDPCAST is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WEBIF is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set

#
# Hardware handling / blockdevices and filesystem maintenance
#
# BR2_PACKAGE_DBUS is not set
# BR2_PACKAGE_DEVMEM2 is not set
# BR2_PACKAGE_DM is not set
# BR2_PACKAGE_DMRAID is not set
BR2_PACKAGE_E2FSPROGS=y
BR2_PACKAGE_E2FSPROGS_BADBLOCKS=y
BR2_PACKAGE_E2FSPROGS_BLKID=y
BR2_PACKAGE_E2FSPROGS_CHATTR=y
BR2_PACKAGE_E2FSPROGS_DUMPE2FS=y
BR2_PACKAGE_E2FSPROGS_E2FSCK=y
BR2_PACKAGE_E2FSPROGS_E2LABEL=y
BR2_PACKAGE_E2FSPROGS_FILEFRAG=y
BR2_PACKAGE_E2FSPROGS_FINDFS=y
BR2_PACKAGE_E2FSPROGS_FSCK=y
BR2_PACKAGE_E2FSPROGS_LOGSAVE=y
BR2_PACKAGE_E2FSPROGS_LSATTR=y
BR2_PACKAGE_E2FSPROGS_MKE2FS=y
BR2_PACKAGE_E2FSPROGS_MKLOSTFOUND=y
BR2_PACKAGE_E2FSPROGS_TUNE2FS=y
BR2_PACKAGE_E2FSPROGS_UUIDGEN=y
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_LIBFUSE is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_HAL is not set
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
BR2_PACKAGE_LIBUSB=y
# BR2_PACKAGE_LM_SENSORS is not set
# BR2_PACKAGE_LVM2 is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MKDOSFS is not set
BR2_PACKAGE_MTD=y
BR2_PACKAGE_MTD_UTILS=y
# BR2_PACKAGE_MTD_20061007 is not set
# BR2_PACKAGE_MTD_20050122 is not set
# BR2_PACKAGE_MTD_UTILS_GIT is not set

#
# MTD tools selection
#
# BR2_PACKAGE_MTD_DOCFDISK is not set
# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set
BR2_PACKAGE_MTD_FLASHCP=y
BR2_PACKAGE_MTD_FLASH_ERASE=y
BR2_PACKAGE_MTD_FLASH_ERASEALL=y
BR2_PACKAGE_MTD_FLASH_INFO=y
BR2_PACKAGE_MTD_FLASH_LOCK=y
BR2_PACKAGE_MTD_FLASH_UNLOCK=y
BR2_PACKAGE_MTD_FTL_CHECK=y
BR2_PACKAGE_MTD_FTL_FORMAT=y
BR2_PACKAGE_MTD_JFFS2DUMP=y
BR2_PACKAGE_MTD_MKFSJFFS2=y
BR2_PACKAGE_MTD_MKFSJFFS=y
BR2_PACKAGE_MTD_MTD_DEBUG=y
BR2_PACKAGE_MTD_NANDDUMP=y
BR2_PACKAGE_MTD_NANDWRITE=y
BR2_PACKAGE_MTD_NFTL_FORMAT=y
BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
BR2_PACKAGE_UDEV_SCSI_ID=y
BR2_PACKAGE_USBMOUNT=y
BR2_PACKAGE_USBUTILS=y
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_XFSPROGS is not set

#
# Audio and video libraries and applications
#
# BR2_PACKAGE_ALSA_LIB is not set

#
# asterisk      - disabled (required openssl and mpg123)
#
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_GSTREAMER is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBMPD is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBTHEORA is not set

#
# libvorbis requires the package libogg to build
#
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_FESTIVAL is not set
# BR2_PACKAGE_VLC is not set

#
# Graphic libraries and applications (graphic/text)
#

#
# text rendering libraries
#
# BR2_PACKAGE_NCURSES is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_SLANG is not set

#
# text rendering applications
#
# BR2_PACKAGE_DIALOG is not set

#
# graphic libraries
#
BR2_PACKAGE_DIRECTFB=y
# BR2_PACKAGE_DIRECTFB_MULTI is not set
# BR2_PACKAGE_DIRECTFB_KEYBOARD is not set
# BR2_PACKAGE_DIRECTFB_SERIALMOUSE is not set
BR2_PACKAGE_DIRECTFB_PNG=y
# BR2_PACKAGE_DIRECTFB_TSLIB is not set
BR2_PACKAGE_DIRECTFB_GIF=y
BR2_PACKAGE_DIRECTFB_JPEG=y
BR2_PACKAGE_DIRECTFB_EXAMPLES=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_ANDI=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_BLTLOAD=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_CPULOAD=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_DATABUFFER=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_DIOLOAD=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_DOK=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_DRIVERTEST=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_FIRE=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_FLIP=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_FONTS=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_INPUT=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_JOYSTICK=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_KNUCKLES=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_LAYER=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_NEO=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_NETLOAD=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_PALETTE=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_PARTICLE=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_PORTER=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_STRESS=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_TEXTURE=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_VIDEO=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_VIDEO_PARTICLE=y
BR2_PACKAGE_DIRECTFB_EXAMPLES_WINDOW=y
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
BR2_PACKAGE_JPEG=y
# BR2_PACKAGE_LIBART is not set
BR2_PACKAGE_LIBPNG=y
BR2_PACKAGE_LIBUNGIF=y
# BR2_PACKAGE_LINUX_FUSION is not set
# BR2_PACKAGE_LITE is not set
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_SAWMAN is not set
# BR2_PACKAGE_SDL is not set
# BR2_PACKAGE_TIFF is not set

#
# busybox graphic applications
#

#
# --> May be broken in busybox
#
# BR2_PACKAGE_FBV is not set
BR2_PACKAGE_FBSET=y

#
# other GUIs
#
# BR2_PACKAGE_QTOPIA4 is not set
BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_XSERVER_xorg is not set
# BR2_PACKAGE_XSERVER_tinyx is not set

#
# X libraries and helper libraries
#
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_LIBGTK2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
BR2_PACKAGE_FREETYPE=y
# BR2_FREETYPE_VERSION_2_2_1 is not set
BR2_FREETYPE_VERSION_2_3_7=y
BR2_FREETYPE_VERSION="2.3.7"
# BR2_PACKAGE_TSLIB is not set
# BR2_PACKAGE_WEBKIT is not set

#
# X Window managers
#
# BR2_PACKAGE_MATCHBOX is not set

#
# X applications
#
# BR2_PACKAGE_ALSAMIXERGUI is not set

#
# dillo         - disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and 
Xorg(7))
#
# BR2_PACKAGE_GQVIEW is not set
# BR2_PACKAGE_LEAFPAD is not set

#
# midori                - disabled (requires Xorg(7))
#
# BR2_PACKAGE_PCMANFM is not set
# BR2_PACKAGE_SYLPHEED is not set
# BR2_PACKAGE_TORSMO is not set
# BR2_PACKAGE_X11VNC is not set
# BR2_PACKAGE_XPDF is not set
# BR2_PACKAGE_XSTROKE is not set
# BR2_PACKAGE_XVKBD is not set

#
# Compressors / decompressors
#
BR2_PACKAGE_LZO=y
BR2_PACKAGE_LZMA_TARGET=y
# BR2_PACKAGE_LZMA_TARGET_HEADERS is not set
BR2_PACKAGE_LZMA_HOST=y
BR2_PACKAGE_ZLIB=y
# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set

#
# Package managers
#
# BR2_PACKAGE_IPKG is not set
# BR2_PACKAGE_PORTAGE is not set

#
# Interpreter languages / Scripting
#
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PYTHON is not set
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set
# BR2_PACKAGE_PHP is not set

#
# XML handling
#
BR2_PACKAGE_EXPAT=y
# BR2_PACKAGE_EZXML is not set
BR2_PACKAGE_LIBXML2=y
BR2_PACKAGE_LIBXSLT=y
# BR2_PACKAGE_XERCES is not set

#
# Java
#
# BR2_PACKAGE_CLASSPATH is not set

#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_MAGICCUBE4D is not set
# BR2_PACKAGE_PRBOOM is not set
# BR2_PACKAGE_RUBIX is not set
# BR2_PACKAGE_VICE is not set
# BR2_PACKAGE_XBOARD is not set

#
# User Packages
#
BR2_PACKAGE_HELLOWORLD=y
BR2_PACKAGE_WXWIDGETS=y
BR2_PACKAGE_MIDDLEWARE=y
BR2_PACKAGE_AVNG=y

#
# Target filesystem options
#
BR2_ROOTFS_PREFIX="at91sam9261ek-NAND"
BR2_ROOTFS_SUFFIX="$(DATE)"

#
# filesystem for target device
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
BR2_TARGET_ROOTFS_EXT2_COPYTO=""
BR2_TARGET_ROOTFS_JFFS2=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056 is not set
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K=y
# BR2_TARGET_ROOTFS_JFFS2_FLASH_128 is not set
# BR2_TARGET_ROOTFS_JFFS2_FLASH_64 is not set
# BR2_TARGET_ROOTFS_JFFS2_CUSTOM is not set
BR2_TARGET_ROOTFS_JFFS2_PAGESIZE=0x800
BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
# BR2_JFFS2_TARGET_SREC is not set
BR2_TARGET_ROOTFS_JFFS2_PAD=y
BR2_TARGET_ROOTFS_JFFS2_PADSIZE=0x02000000
BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set

#
# bootloader for target device
#
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="$(BOARD_NAME)"
BR2_TARGET_UBOOT_2009_01=y
# BR2_TARGET_UBOOT_2008_10 is not set
# BR2_TARGET_UBOOT_1_3_4 is not set
# BR2_TARGET_UBOOT_1_2_0_ATMEL is not set
BR2_UBOOT_VERSION="2009.01"
BR2_U_BOOT_SITE="ftp://ftp.denx.de/pub/u-boot"
BR2_TARGET_U_BOOT_ARCH_PATCH=y
BR2_TARGET_U_BOOT_2009_01_ARCH_AT91=y
BR2_TARGET_U_BOOT_ARCH_AT91_PATCH_DIR="target/device/Atmel/arch-arm/u-boot/2009.01"
BR2_TARGET_UBOOT_CUSTOM_PATCH=""
# BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD is not set
BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH=y
# BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH is not set
# BR2_TARGET_UBOOT_BOOTSOURCE_FLASH is not set
# BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD is not set
# BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM is not set
BR2_TARGET_UBOOT_BOOTSOURCE="dataflash"
# BR2_TARGET_UBOOT_SILENT is not set
# BR2_TARGET_UBOOT_TOOL_MKIMAGE is not set
# BR2_TARGET_UBOOT_TOOL_ENV is not set
BR2_TARGET_UBOOT_DEFAULT_ENV=y
# BR2_TARGET_UBOOT_SDRAM_SIZE_256MB is not set
# BR2_TARGET_UBOOT_SDRAM_SIZE_128MB is not set
BR2_TARGET_UBOOT_SDRAM_SIZE_64MB=y
# BR2_TARGET_UBOOT_SDRAM_SIZE_32MB is not set
# BR2_TARGET_UBOOT_SDRAM_SIZE_16MB is not set
# BR2_TARGET_UBOOT_SDRAM_SIZE_8MB is not set
BR2_TARGET_UBOOT_MEMORY_SIZE="64M"
# BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB is not set
# BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB is not set
# BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB is not set
BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB=y
# BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB is not set
# BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB is not set
BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB=y
# BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB is not set
# BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB is not set
# BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB is not set
# BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB is not set
# BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB is not set
BR2_TARGET_UBOOT_END_OF_FLASH="C083FFFF"
BR2_TARGET_UBOOT_KERNEL_START="21000000"
BR2_TARGET_UBOOT_KERNEL_LOCATION="C0042000"
BR2_TARGET_UBOOT_FILESYSTEM_START="21210000"
BR2_TARGET_UBOOT_FILESYSTEM_LOCATION="C0252000"
BR2_TARGET_UBOOT_FILESYSTEM_SIZE="6000000"
BR2_TARGET_UBOOT_NETWORK=y
BR2_TARGET_UBOOT_SERVERIP="192.168.1.196"
BR2_TARGET_UBOOT_IPADDR="192.168.1.238"
BR2_TARGET_UBOOT_GATEWAY="192.168.1.1"
BR2_TARGET_UBOOT_NETMASK="255.255.255.0"
BR2_TARGET_UBOOT_ETHADDR="00:01:92:00:04:87"
BR2_TARGET_UBOOT_ETH1ADDR=""
BR2_BOOTSOURCE_DATAFLASH=y
BR2_BOOTSOURCE_NANDFLASH=y
BR2_BOOTSOURCE=y

#
# Kernel
#
# BR2_KERNEL_none is not set
BR2_KERNEL_LINUX_ADVANCED=y
# BR2_KERNEL_LINUX is not set
# BR2_KERNEL_HURD is not set
BR2_PACKAGE_LINUX=y
BR2_PACKAGE_LINUX_FORMAT="uImage"
BR2_KERNEL_CURRENT_VERSION="2.6.28.2"
BR2_KERNEL_LATEST_2_6_28="2"
BR2_KERNEL_LATEST_2_6_27="13"
BR2_KERNEL_LATEST_2_6_26="8"
BR2_KERNEL_LATEST_2_6_25="19"
BR2_KERNEL_LATEST_2_6_24="7"
BR2_KERNEL_LATEST_2_6_23="17"
BR2_KERNEL_LATEST_2_6_22="19"
BR2_KERNEL_LATEST_2_6_21="7"
BR2_KERNEL_LATEST_2_6_20="21"
BR2_KERNEL_PATCH_LEVEL="$(BR2_KERNEL_MINORLEVEL)"
BR2_KERNEL_NEXT_VERSION="2.6.29"
BR2_KERNEL_THIS_VERSION="2.6.28"
BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6"
BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.
$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
BR2_KERNEL_PATCH_SITE="$(BR2_KERNEL_SITE)"
# BR2_LINUX_2_6_STABLE is not set
BR2_LINUX_2_6_28=y
# BR2_LINUX_2_6_27 is not set
# BR2_LINUX_2_6_26 is not set
# BR2_LINUX_2_6_25 is not set
# BR2_LINUX_2_6_24 is not set
# BR2_LINUX_2_6_23 is not set
# BR2_LINUX_2_6_22 is not set
# BR2_LINUX_2_6_21 is not set
# BR2_LINUX_2_6_20 is not set
# BR2_LINUX_2_6_29 is not set
# BR2_LINUX26_CUSTOM is not set

#
# Patches
#
BR2_KERNEL_ADD_KERNEL_ORG_PATCH=y
# BR2_KERNEL_ADD_LATEST is not set
# BR2_KERNEL_ADD_LATEST_MINORPATCH is not set
BR2_KERNEL_ADD_MINORPATCH=y
# BR2_KERNEL_ADD_LATEST_RC_PATCH is not set
# BR2_KERNEL_ADD_RC_PATCH is not set
# BR2_KERNEL_ADD_LATEST_SNAPSHOT is not set
# BR2_KERNEL_ADD_SNAPSHOT is not set
# BR2_KERNEL_ADD_LATEST_MM_PATCH is not set
# BR2_KERNEL_ADD_MM_PATCH is not set
BR2_KERNEL_ADD_PATCH=y
BR2_KERNEL_MINORLEVEL="2"
BR2_KERNEL_ARCH_PATCH_ENABLED=y
BR2_ARCH_AT91_2_6_28=y
# BR2_ARCH_AT91_2_6_27 is not set
# BR2_ARCH_AT91_2_6_26 is not set
# BR2_ARCH_AT91_2_6_25 is not set
# BR2_ARCH_AT91_2_6_24 is not set
# BR2_ARCH_AT91_2_6_22 is not set
BR2_LINUX_BSP_PATCH=""
BR2_KERNEL_PATCH="patch-$(BR2_DOWNLOAD_LINUX26_VERSION).
$(BR2_KERNEL_PATCH_LEVEL).bz2"
BR2_EXTRA_VERSION=".$(BR2_KERNEL_PATCH_LEVEL)"
BR2_KERNEL_BASE=y
BR2_DOWNLOAD_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
BR2_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION).$(BR2_KERNEL_PATCH_LEVEL)"

#
# Linux Kernel Configuration
#
# BR2_PACKAGE_LINUX_USE_KCONFIG is not set
BR2_PACKAGE_LINUX_USE_DEFCONFIG=y
# BR2_PACKAGE_LINUX_USE_XCONFIG is not set
# BR2_LINUX_BIN_BZIMAGE is not set
BR2_LINUX_BIN_UIMAGE=y
# BR2_LINUX_BIN_VMLINUX is not set
# BR2_LINUX_BIN_ZIMAGE is not set
# BR2_LINUX_BIN_CUSTOM is not set

#
# Destinations for linux kernel binaries
#
# BR2_LINUX_COPYTO_ROOTFS is not set
BR2_LINUX_COPYTO_TFTPBOOT=y
BR2_LINUX_COPYTO=""
BR2_LINUX_COPY_CONFIGURATION=y


Cheers,

Lloyd

[Buildroot] DBUS keeps getting installed...

[Peter Korsgaard]

>>>>> "Lloyd" == Lloyd Sargent <lsargent@txdigital.com> writes:

Hi,

 Lloyd> #
 Lloyd> # User Packages
 Lloyd> #
 Lloyd> BR2_PACKAGE_HELLOWORLD=y
 Lloyd> BR2_PACKAGE_WXWIDGETS=y
 Lloyd> BR2_PACKAGE_MIDDLEWARE=y
 Lloyd> BR2_PACKAGE_AVNG=y

Could it be that one of these local packages depends on either dbus or
XSERVER (which depends on dbus)?

-- 
Bye, Peter Korsgaard

[Buildroot] DBUS keeps getting installed...

[Peter Korsgaard]

>>>>> "Lloyd" == Lloyd Sargent <lsargent@txdigital.com> writes:

Hi,

 Lloyd> Okay, I'm really puzzled. In my initial build I had
 Lloyd> DBUS. Well, it was taking too many resources so I removed it.

 Lloyd> Or so I thought.

 Lloyd> In my next build, there was DBUS again!

 Lloyd> So I checked the .config file:

 Lloyd> # BR2_PACKAGE_DBUS is not set

 Lloyd> Perhaps I misread something, but I was under the impression
 Lloyd> that if DBUS was not set, then it wouldn't be included in the
 Lloyd> build?

That's true. Do you do a clean rebuild (rm -rf *build_*) or just edit
the configuration and run make again? Packages don't automatically get
removed from the target file system if you deselect them again.

The other option is some other package needing dbus, and hence forcing
it to be built, but then it should normally also depend / select it in
Kconfig, so you should see it in your .config

Could you post your .config please?

-- 
Bye, Peter Korsgaard

[Buildroot] DBUS keeps getting installed...

[Lloyd Sargent]

> >>>>> "Lloyd" == Lloyd Sargent <lsargent@txdigital.com> writes:
>
> Hi,
>
>  Lloyd> Okay, I'm really puzzled. In my initial build I had
>  Lloyd> DBUS. Well, it was taking too many resources so I removed it.
>
>  Lloyd> Or so I thought.
>
>  Lloyd> In my next build, there was DBUS again!
>
>  Lloyd> So I checked the .config file:
>
>  Lloyd> # BR2_PACKAGE_DBUS is not set
>
>  Lloyd> Perhaps I misread something, but I was under the impression
>  Lloyd> that if DBUS was not set, then it wouldn't be included in the
>  Lloyd> build?
>
> That's true. Do you do a clean rebuild (rm -rf *build_*) or just edit
> the configuration and run make again? Packages don't automatically get
> removed from the target file system if you deselect them again.

AH! This I was not aware of (or did not properly understand).

This is most likely the issue.

> The other option is some other package needing dbus, and hence forcing
> it to be built, but then it should normally also depend / select it in
> Kconfig, so you should see it in your .config

No, nothing I'm building requires dbus.