* [Buildroot] unrecognised command line option Error
@ 2009-08-19 13:24 suhas dumbhare
2009-08-19 19:52 ` Thomas Petazzoni
0 siblings, 1 reply; 6+ messages in thread
From: suhas dumbhare @ 2009-08-19 13:24 UTC (permalink / raw)
To: buildroot
Hello,
sudhir>To
Everyone
sudhir>Host:ubuntu8.10
sudhir>Target:ARM7
sudhir>Buildroot:2009.05
sudhir>uCLibc:0.9.30.1
sudhir>after installing some packeges succesfully
sudhir>it pop out following error in
sudhir>uCLibc:0.9.30.1
rm -rf /usr/Tools/buildroot-2009.05/project_build_arm/uclibc/buildroot-config
mkdir -p /usr/Tools/buildroot-2009.05/project_build_arm/uclibc
cp -dpRf package/config/buildroot-config /usr/Tools/buildroot-2009.05/project_build_arm/uclibc/buildroot-config
/usr/bin/make -j1 -C /usr/Tools/buildroot-2009.05/toolchain_build_arm/uClibc-0.9.30.1 \
??? ??? PREFIX= \
??? ??? DEVEL_PREFIX=/ \
??? ??? RUNTIME_PREFIX=/ \
??? ??? HOSTCC="/usr/bin/gcc" \
??? ???
all
make[1]: Entering directory `/usr/Tools/buildroot-2009.05/toolchain_build_arm/uClibc-0.9.30.1'
? AS lib/crti.o
cc1: error: unrecognized
command line option "-mfdpic"
make[1]: *** [lib/crti.o] Error 1
make[1]: Leaving directory `/usr/Tools/buildroot-2009.05/toolchain_build_arm/uClibc-0.9.30.1'
make: *** [/usr/Tools/buildroot-2009.05/toolchain_build_arm/uClibc-0.9.30.1/lib/libc.a] Error 2
Looking forward to your help~~
Thanks a lot.
Sudhir
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20090819/323f08c6/attachment.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] unrecognised command line option Error
2009-08-19 13:24 [Buildroot] unrecognised command line option Error suhas dumbhare
@ 2009-08-19 19:52 ` Thomas Petazzoni
2009-08-20 8:07 ` suhas dumbhare
2009-08-20 9:30 ` suhas dumbhare
0 siblings, 2 replies; 6+ messages in thread
From: Thomas Petazzoni @ 2009-08-19 19:52 UTC (permalink / raw)
To: buildroot
Hello,
First, please do *NOT* send several times the same e-mail with the same
question. You posted four times the same question, this is very
annoying. These multiple posts is a strong incentive to not answer your
question. So please avoid that in the future, thanks.
Le Wed, 19 Aug 2009 06:24:24 -0700 (PDT),
suhas dumbhare <s_dumbhare@yahoo.com> a ?crit :
> command line option "-mfdpic"
-mfdpic is a gcc option specific to the FRV architecture. So it's
strange that uClibc uses it if you configured Buildroot for ARM.
Could you post Buildroot configuration file. It is named .config in the
main Buildroot directory.
Sincerly,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] unrecognised command line option Error
2009-08-19 19:52 ` Thomas Petazzoni
@ 2009-08-20 8:07 ` suhas dumbhare
2009-08-20 9:30 ` suhas dumbhare
1 sibling, 0 replies; 6+ messages in thread
From: suhas dumbhare @ 2009-08-20 8:07 UTC (permalink / raw)
To: buildroot
Hello,
sudhir>I apologiesd to send many times.
sudhir>I wiil send config file
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
|??????????????????????????????????? ./config???????????????????????????????????????????????????????? |
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
#
mainmenu "Buildroot2 Configuration"
config BR2_HAVE_DOT_CONFIG
??? bool
??? default y
config BR2_VERSION
??? string
??? default "2009.05"
source "target/Config.in.arch"
source "target/device/Config.in"
menu "Build options"
config BR2_WGET
??? string "Wget command"
??? default "wget --passive-ftp -nd"
config BR2_SVN_CO
??? string "Subversion (svn) command to download source tree"
??? default "svn co"
config BR2_SVN_UP
??? string "Subversion (svn) command to update source tree"
??? default "svn up"
config BR2_GIT
??? string "Git command to download source tree"
??? default "git clone"
config BR2_ZCAT
??? string "zcat command"
??? default "gzip -d -c"
??? help
??? ? Command to be used to extract a gzip'ed file to stdout.
??? ? zcat is identical to gunzip -c except that the former may
??? ? not be available on your system.
??? ? Default is "gzip -d -c"
??? ? Other possible values include "gunzip -c" or "zcat".
config BR2_BZCAT
??? string "bzcat command"
??? default "bzcat"
??? help
??? ? Command to be used to extract a bzip2'ed file to stdout.
??? ? bzcat is identical to bunzip2 -c except that the former may
??? ? not be available on your system.
??? ? Default is "bzcat"
??? ? Other possible values include "bunzip2 -c" or "bzip2 -d -c".
config BR2_TAR_OPTIONS
??? string "Tar options"
??? default ""
??? help
??? ? Options to pass to tar when extracting the sources.
??? ? E.g. " -v --exclude='*.svn*'" to exclude all .svn internal files
??? ? and to be verbose.
config BR2_DL_DIR
??? string "Download dir"
??? default "$(BASE_DIR)/dl"
??? help
??? ? Directory to store all the source files that we need to fetch..
??? ? If the Linux shell environment has defined the BUILDROOT_DL_DIR
??? ? environment variable, then this overrides this configuration item.
??? ? The default is $(BASE_DIR)/dl
config BR2_COPYTO
??? string "Copy result to..."
??? default ""
??? help
??? ? Setting this variable will (eventually) override
??? ? any other copyto configurations in buildroot.
source??? "target/device/Config.in.mirrors"
config BR2_STAGING_DIR
??? string "Toolchain and header file location?"
??? default "$(BUILD_DIR)/staging_dir"
??? help
??? ? This is the location where the toolchain will be installed.? The
??? ? toolchain will not work if it is moved from this location.
??? ? Therefore, if you wish to package up a uClibc toolchain, it is
??? ? important that is is set to the final location where the toolchain
??? ? will be used.
??? ? Most people will leave this set to the default value of
??? ? "$(BUILD_DIR)/staging_dir".
config BR2_FPU_SUFFIX
??? bool "Add '_nofpu' suffix for softfloat toolchains"
??? help
??? ? If the toolchain is configured to use softfloat, then
??? ? the "_nofpu" suffix will be added to the toolchain build
??? ? directory name and to any rootfs image name
config BR2_TOPDIR_PREFIX
??? string "Custom build dir prefix"
??? default ""
??? help
??? ? Add a custom string to the beginning of the build directories..
??? ? build_ARCH -> [PREFIX]_build_ARCH
??? ? toolchain_build_ARCH -> [PREFIX]_toolchain_build_ARCH
config BR2_TOPDIR_SUFFIX
??? string "Custom build dir suffix"
??? default ""
??? help
??? ? Add a custom string to the end of the build directories.
??? ? build_ARCH -> build_ARCH_[SUFFIX]
??? ? toolchain_build_ARCH -> toolchain_build_ARCH_[SUFFIX]
config BR2_GNU_BUILD_SUFFIX
??? string "GNU build hostname suffix"
??? default "pc-linux-gnu"
??? help
??? ? The string used to pass to configure scripts via the
??? ? --build= option.? Just specify the suffix here, the leading
??? ? arch will be filled in automatically.
??? ? Here's some copy and paste build host options for you:
??? ????? linux:?? pc-linux-gnu
??? ????? cygwin:? pc-cygwin
??? ????? os x:??? apple-darwin7 / apple-darwin8
config BR2_GNU_TARGET_SUFFIX
??? string "GNU target suffix"
??? default "linux-uclibcgnueabi" if BR2_ARM_EABI
??? default "linux-uclibc"
??? help
??? ? The string used to pass to configure scripts via the
??? ? --target= option.? Just specify the suffix here, the leading
??? ? arch will be filled in automatically.
??? ? Most users will want to stick with the default setting, though
??? ? other users (most notably ARM EABI) like to add on to this in
??? ? order to stay in line with gcc conventions.
??? ? Default options are:
??? ????? linux-uclibcgnueabi for ARM EABI
??? ????? linux-uclibc for the rest
??? ????? gnuhurd-uclibc for the hurd
config BR2_JLEVEL
??? int "Number of jobs to run simultaneously"
??? default "1"
??? help
??? ? Number of jobs to run simultaneously
config BR2_PREFER_IMA
??? bool "prefer IMA compiles"
??? help
??? ? Where possible, compile package with Inter Module Analysis.
??? ? This potentially uses alot of system resources on your compile
??? ? host with the benefit of creating smaller binaries for the target.
??? ? If unsure, say No.
??? ? WARNING: This is highly experimental at the moment.
config BR2_DEPRECATED
??? bool "Show packages that are deprecated or obsolete"
??? help
??? ? This option hides outdated/obsolete versions of packages.
config BR2_RECENT
??? bool "Show packages that are of the latest major version"
??? default y
??? help
??? ? This option show recent versions of packages.
config BR2_CONFIG_CACHE
??? bool "Use a central configure cache file"
??? help
??? ? This determines if a central config cache is used by
??? ? packages, reducing the configure time for packages as each
??? ? one caches its findings.
config BR2_ENABLE_DEBUG
??? bool "build packages with debugging symbols"
??? select BR2_PACKAGE_GDB_SERVER
??? help
??? ? Build packages with debugging symbols
??? ? enabled
if BR2_ENABLE_DEBUG
choice
??? prompt "gcc debug level"
??? default BR2_DEBUG_2
??? help
??? ? Set the debug level for gcc
config BR2_DEBUG_1
??? bool "debug level 1"
??? help
??? ? Debug level 1 produces minimal information, enough
??? ? for making backtraces in parts of the program that
??? ? you don't plan to debug. This includes descriptions
??? ? of functions and external variables, but no information
??? ? about local variables and no line numbers.
config BR2_DEBUG_2
??? bool "debug level 2"
??? help
??? ? The default gcc debug level is 2
config BR2_DEBUG_3
??? bool "debug level 3"
??? help
??? ? Level 3 includes extra information, such as all the
??? ? macro definitions present in the program. Some debuggers
??? ? support macro expansion when you use -g3.
endchoice
endif
choice
??? prompt "strip"
??? default BR2_STRIP_strip
??? help
??? ? Select whether to strip binaries and libraries for the target
??? ? or not.
??? ? strip?? is the normal strip command
??? ? sstrip? is a strip that discards more than the normal strip
??? ? none??? do not strip (only for debugging!)
config BR2_STRIP_strip
??? bool "strip"
??? depends on !BR2_ENABLE_DEBUG && !BR2_ELF2FLT
??? help
??? ? strip?? is the normal strip command
config BR2_STRIP_sstrip
??? bool "sstrip"
??? select BR2_PACKAGE_SSTRIP_HOST
??? depends on !BR2_ENABLE_DEBUG && !BR2_ELF2FLT
??? help
??? ? sstrip? is a strip that discards more than the normal strip
config BR2_STRIP_none
??? bool "none"
??? help
??? ? none??? do not strip (only for debugging!)
endchoice
choice
??? prompt "gcc optimization level"
??? default BR2_OPTIMIZE_S
??? help
??? ? Set the optimization level for gcc
config BR2_OPTIMIZE_0
??? bool "optimization level 0"
??? depends on !BR2_PACKAGE_LINUX
??? help
??? ? Do not optimize. This is the default.
config BR2_OPTIMIZE_1
??? bool "optimization level 1"
??? depends on !BR2_PACKAGE_LINUX
??? help
??? ? Optimize. Optimizing compilation takes somewhat more time,
??? ? and a lot more memory for a large function. With -O, the
??? ? compiler tries to reduce code size and execution time,
??? ? without performing any optimizations that take a great deal
??? ? of compilation time. -O turns on the following optimization
??? ? flags: -fdefer-pop -fdelayed-branch -fguess-branch-probability
??? ? -fcprop-registers -floop-optimize -fif-conversion
??? ? -fif-conversion2 -ftree-ccp -ftree-dce -ftree-dominator-opts
??? ? -ftree-dse -ftree-ter -ftree-lrs -ftree-sra -ftree-copyrename
??? ? -ftree-fre -ftree-ch -funit-at-a-time -fmerge-constants
??? ? -O also turns on -fomit-frame-pointer on machines where doing
??? ? so does not interfere with debugging.
config BR2_OPTIMIZE_2
??? bool "optimization level 2"
??? help
??? ? Optimize even more. GCC performs nearly all supported optimizations
??? ? that do not involve a space-speed tradeoff. The compiler does not
??? ? perform loop unrolling or function inlining when you specify -O2.
??? ? As compared to -O, this option increases both compilation time and
??? ? the performance of the generated code. -O2 turns on all optimization
??? ? flags specified by -O. It also turns on the following optimization
??? ? flags: -fthread-jumps -fcrossjumping -foptimize-sibling-calls
??? ? -fcse-follow-jumps -fcse-skip-blocks -fgcse? -fgcse-lm
??? ? -fexpensive-optimizations -fstrength-reduce -frerun-cse-after-loop
??? ? -frerun-loop-opt -fcaller-saves -fpeephole2 -fschedule-insns
??? ? -fschedule-insns2 -fsched-interblock -fsched-spec -fregmove
??? ? -fstrict-aliasing -fdelete-null-pointer-checks -freorder-blocks
??? ? -freorder-functions -falign-functions -falign-jumps -falign-loops
??? ? -falign-labels -ftree-vrp -ftree-pre
??? ? Please note the warning under -fgcse about invoking -O2 on programs
??? ? that use computed gotos.
config BR2_OPTIMIZE_3
??? bool "optimization level 3"
??? help
??? ? Optimize yet more. -O3 turns on all optimizations specified by -O2
??? ? and also turns on the -finline-functions, -funswitch-loops and
??? ? -fgcse-after-reload options.
config BR2_OPTIMIZE_S
??? bool "optimize for size"
??? help
??? ? Optimize for size. -Os enables all -O2 optimizations that do not
??? ? typically increase code size. It also performs further optimizations
??? ? designed to reduce code size. -Os disables the following optimization
??? ? flags: -falign-functions -falign-jumps -falign-loops -falign-labels
??? ? -freorder-blocks -freorder-blocks-and-partition -fprefetch-loop-arrays
??? ? -ftree-vect-loop-version
endchoice
config BR2_PREFER_STATIC_LIB
??? bool "prefer static libraries"
??? help
??? ? Where possible, build and use static libraries for the target..
??? ? This potentially increases your code size and should only be
??? ? used if you know what you do.
??? ? The default is to build dynamic libraries and use those on
??? ? the target filesystem.
??? ? WARNING: This is highly experimental at the moment.
config BR2_HAVE_MANPAGES
??? bool "manpages on the target"
??? help
??? ? Leave the manpages on the target.
??? ? If you say n here, your target will not contain any
??? ? manpage.
config BR2_HAVE_INFOPAGES
??? bool "infopages on the target"
??? help
??? ? Leave the infopages on the target.
??? ? If you say n here, your target will not contain any
??? ? infopage.
config BR2_HAVE_DOCUMENTATION
??? bool "documentation on the target"
??? help
??? ? Leave the documentation on the target.
??? ? If you say n here, your target will not contain any
??? ? documentation.
config BR2_HAVE_DEVFILES
??? bool "development files in target filesystem"
??? help
??? ? Install headers and static libraries in the
??? ? target filesystem
source package/gnuconfig/Config.in
endmenu
source "toolchain/Config.in"
source "package/Config.in"
source "target/Config.in"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>? command line option "-mfdpic"
Could you post Buildroot configuration file. It is named .config in the
main Buildroot directory.
Sincerly,
Sudhir
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20090820/866cea6d/attachment-0001.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] unrecognised command line option Error
2009-08-19 19:52 ` Thomas Petazzoni
2009-08-20 8:07 ` suhas dumbhare
@ 2009-08-20 9:30 ` suhas dumbhare
2009-08-20 12:39 ` Thomas Petazzoni
1 sibling, 1 reply; 6+ messages in thread
From: suhas dumbhare @ 2009-08-20 9:30 UTC (permalink / raw)
To: buildroot
Hello,
>I apologaiesd to my mistake.
Hello,
>? command line option "-mfdpic"
-mfdpic is a gcc option specific to the FRV architecture. So it's
strange that uClibc uses it if you configured Buildroot for ARM.
Could you post Buildroot configuration file. It is named .config in the
main Buildroot directory.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
|??????????????????????????????????? .config? File ? ? ? ? ? ? ??????????????????????????????????????????? |
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
#
mainmenu "Buildroot2 Configuration"
config BR2_HAVE_DOT_CONFIG
??? bool
??? default y
config BR2_VERSION
??? string
??? default "2009.05"
source "target/Config.in.arch"
source "target/device/Config.in"
menu "Build options"
config BR2_WGET
??? string "Wget command"
??? default "wget --passive-ftp -nd"
config BR2_SVN_CO
??? string "Subversion (svn) command to download source tree"
??? default "svn co"
config BR2_SVN_UP
??? string "Subversion (svn) command to update source tree"
??? default "svn up"
config BR2_GIT
??? string "Git command to download source tree"
??? default "git clone"
config BR2_ZCAT
??? string "zcat command"
??? default "gzip -d -c"
??? help
??? ? Command to be used to extract a gzip'ed file to stdout.
??? ? zcat is identical to gunzip -c except that the former may
??? ? not be available on your system.
??? ? Default is "gzip -d -c"
??? ? Other possible values include "gunzip -c" or "zcat".
config BR2_BZCAT
??? string "bzcat command"
??? default "bzcat"
??? help
??? ? Command to be used to extract a bzip2'ed file to stdout.
??? ? bzcat is identical to bunzip2 -c except that the former may
??? ? not be available on your system.
??? ? Default is "bzcat"
??? ? Other possible values include "bunzip2 -c" or "bzip2 -d -c".
config BR2_TAR_OPTIONS
??? string "Tar options"
??? default ""
??? help
??? ? Options to pass to tar when extracting the sources.
??? ? E.g. " -v --exclude='*.svn*'" to exclude all .svn internal files
??? ? and to be verbose.
config BR2_DL_DIR
??? string "Download dir"
??? default "$(BASE_DIR)/dl"
??? help
??? ? Directory to store all the source files that we need to fetch..
??? ? If the Linux shell environment has defined the BUILDROOT_DL_DIR
??? ? environment variable, then this overrides this configuration item.
??? ? The default is $(BASE_DIR)/dl
config BR2_COPYTO
??? string "Copy result to..."
??? default ""
??? help
??? ? Setting this variable will (eventually) override
??? ? any other copyto configurations in buildroot.
source??? "target/device/Config.in.mirrors"
config BR2_STAGING_DIR
??? string "Toolchain and header file location?"
??? default "$(BUILD_DIR)/staging_dir"
??? help
??? ? This is the location where the toolchain will be installed.? The
??? ? toolchain will not work if it is moved from this location.
??? ? Therefore, if you wish to package up a uClibc toolchain, it is
??? ? important that is is set to the final location where the toolchain
??? ? will be used.
??? ? Most people will leave this set to the default value of
??? ? "$(BUILD_DIR)/staging_dir".
config BR2_FPU_SUFFIX
??? bool "Add '_nofpu' suffix for softfloat toolchains"
??? help
??? ? If the toolchain is configured to use softfloat, then
??? ? the "_nofpu" suffix will be added to the toolchain build
??? ? directory name and to any rootfs image name
config BR2_TOPDIR_PREFIX
??? string "Custom build dir prefix"
??? default ""
??? help
??? ? Add a custom string to the beginning of the build directories..
??? ? build_ARCH -> [PREFIX]_build_ARCH
??? ? toolchain_build_ARCH -> [PREFIX]_toolchain_build_ARCH
config BR2_TOPDIR_SUFFIX
??? string "Custom build dir suffix"
??? default ""
??? help
??? ? Add a custom string to the end of the build directories.
??? ? build_ARCH -> build_ARCH_[SUFFIX]
??? ? toolchain_build_ARCH -> toolchain_build_ARCH_[SUFFIX]
config BR2_GNU_BUILD_SUFFIX
??? string "GNU build hostname suffix"
??? default "pc-linux-gnu"
??? help
??? ? The string used to pass to configure scripts via the
??? ? --build= option.? Just specify the suffix here, the leading
??? ? arch will be filled in automatically.
??? ? Here's some copy and paste build host options for you:
??? ????? linux:?? pc-linux-gnu
??? ????? cygwin:? pc-cygwin
??? ????? os x:??? apple-darwin7 / apple-darwin8
config BR2_GNU_TARGET_SUFFIX
??? string "GNU target suffix"
??? default "linux-uclibcgnueabi" if BR2_ARM_EABI
??? default "linux-uclibc"
??? help
??? ? The string used to pass to configure scripts via the
??? ? --target= option.? Just specify the suffix here, the leading
??? ? arch will be filled in automatically.
??? ? Most users will want to stick with the default setting, though
??? ? other users (most notably ARM EABI) like to add on to this in
??? ? order to stay in line with gcc conventions.
??? ? Default options are:
??? ????? linux-uclibcgnueabi for ARM EABI
??? ????? linux-uclibc for the rest
??? ????? gnuhurd-uclibc for the hurd
config BR2_JLEVEL
??? int "Number of jobs to run simultaneously"
??? default "1"
??? help
??? ? Number of jobs to run simultaneously
config BR2_PREFER_IMA
??? bool "prefer IMA compiles"
??? help
??? ? Where possible, compile package with Inter Module Analysis.
??? ? This potentially uses alot of system resources on your compile
??? ? host with the benefit of creating smaller binaries for the target.
??? ? If unsure, say No.
??? ? WARNING: This is highly experimental at the moment.
config BR2_DEPRECATED
??? bool "Show packages that are deprecated or obsolete"
??? help
??? ? This option hides outdated/obsolete versions of packages.
config BR2_RECENT
??? bool "Show packages that are of the latest major version"
??? default y
??? help
??? ? This option show recent versions of packages.
config BR2_CONFIG_CACHE
??? bool "Use a central configure cache file"
??? help
??? ? This determines if a central config cache is used by
??? ? packages, reducing the configure time for packages as each
??? ? one caches its findings.
config BR2_ENABLE_DEBUG
??? bool "build packages with debugging symbols"
??? select BR2_PACKAGE_GDB_SERVER
??? help
??? ? Build packages with debugging symbols
??? ? enabled
if BR2_ENABLE_DEBUG
choice
??? prompt "gcc debug level"
??? default BR2_DEBUG_2
??? help
??? ? Set the debug level for gcc
config BR2_DEBUG_1
??? bool "debug level 1"
??? help
??? ? Debug level 1 produces minimal information, enough
??? ? for making backtraces in parts of the program that
??? ? you don't plan to debug. This includes descriptions
??? ? of functions and external variables, but no information
??? ? about local variables and no line numbers.
config BR2_DEBUG_2
??? bool "debug level 2"
??? help
??? ? The default gcc debug level is 2
config BR2_DEBUG_3
??? bool "debug level 3"
??? help
??? ? Level 3 includes extra information, such as all the
??? ? macro definitions present in the program. Some debuggers
??? ? support macro expansion when you use -g3.
endchoice
endif
choice
??? prompt "strip"
??? default BR2_STRIP_strip
??? help
??? ? Select whether to strip binaries and libraries for the target
??? ? or not.
??? ? strip?? is the normal strip command
??? ? sstrip? is a strip that discards more than the normal strip
??? ? none??? do not strip (only for debugging!)
config BR2_STRIP_strip
??? bool "strip"
??? depends on !BR2_ENABLE_DEBUG && !BR2_ELF2FLT
??? help
??? ? strip?? is the normal strip command
config BR2_STRIP_sstrip
??? bool "sstrip"
??? select BR2_PACKAGE_SSTRIP_HOST
??? depends on !BR2_ENABLE_DEBUG && !BR2_ELF2FLT
??? help
??? ? sstrip? is a strip that discards more than the normal strip
config BR2_STRIP_none
??? bool "none"
??? help
??? ? none??? do not strip (only for debugging!)
endchoice
choice
??? prompt "gcc optimization level"
??? default BR2_OPTIMIZE_S
??? help
??? ? Set the optimization level for gcc
config BR2_OPTIMIZE_0
??? bool "optimization level 0"
??? depends on !BR2_PACKAGE_LINUX
??? help
??? ? Do not optimize. This is the default.
config BR2_OPTIMIZE_1
??? bool "optimization level 1"
??? depends on !BR2_PACKAGE_LINUX
??? help
??? ? Optimize. Optimizing compilation takes somewhat more time,
??? ? and a lot more memory for a large function. With -O, the
??? ? compiler tries to reduce code size and execution time,
??? ? without performing any optimizations that take a great deal
??? ? of compilation time. -O turns on the following optimization
??? ? flags: -fdefer-pop -fdelayed-branch -fguess-branch-probability
??? ? -fcprop-registers -floop-optimize -fif-conversion
??? ? -fif-conversion2 -ftree-ccp -ftree-dce -ftree-dominator-opts
??? ? -ftree-dse -ftree-ter -ftree-lrs -ftree-sra -ftree-copyrename
??? ? -ftree-fre -ftree-ch -funit-at-a-time -fmerge-constants
??? ? -O also turns on -fomit-frame-pointer on machines where doing
??? ? so does not interfere with debugging.
config BR2_OPTIMIZE_2
??? bool "optimization level 2"
??? help
??? ? Optimize even more. GCC performs nearly all supported optimizations
??? ? that do not involve a space-speed tradeoff. The compiler does not
??? ? perform loop unrolling or function inlining when you specify -O2.
??? ? As compared to -O, this option increases both compilation time and
??? ? the performance of the generated code. -O2 turns on all optimization
??? ? flags specified by -O. It also turns on the following optimization
??? ? flags: -fthread-jumps -fcrossjumping -foptimize-sibling-calls
??? ? -fcse-follow-jumps -fcse-skip-blocks -fgcse? -fgcse-lm
??? ? -fexpensive-optimizations -fstrength-reduce -frerun-cse-after-loop
??? ? -frerun-loop-opt -fcaller-saves -fpeephole2 -fschedule-insns
??? ? -fschedule-insns2 -fsched-interblock -fsched-spec -fregmove
??? ? -fstrict-aliasing -fdelete-null-pointer-checks -freorder-blocks
??? ? -freorder-functions -falign-functions -falign-jumps -falign-loops
??? ? -falign-labels -ftree-vrp -ftree-pre
??? ? Please note the warning under -fgcse about invoking -O2 on programs
??? ? that use computed gotos.
config BR2_OPTIMIZE_3
??? bool "optimization level 3"
??? help
??? ? Optimize yet more. -O3 turns on all optimizations specified by -O2
??? ? and also turns on the -finline-functions, -funswitch-loops and
??? ? -fgcse-after-reload options.
config BR2_OPTIMIZE_S
??? bool "optimize for size"
??? help
??? ? Optimize for size. -Os enables all -O2 optimizations that do not
??? ? typically increase code size. It also performs further optimizations
??? ? designed to reduce code size. -Os disables the following optimization
??? ? flags: -falign-functions -falign-jumps -falign-loops -falign-labels
??? ? -freorder-blocks -freorder-blocks-and-partition -fprefetch-loop-arrays
??? ? -ftree-vect-loop-version
endchoice
config BR2_PREFER_STATIC_LIB
??? bool "prefer static libraries"
??? help
??? ? Where possible, build and use static libraries for the target..
??? ? This potentially increases your code size and should only be
??? ? used if you know what you do.
??? ? The default is to build dynamic libraries and use those on
??? ? the target filesystem.
??? ? WARNING: This is highly experimental at the moment.
config BR2_HAVE_MANPAGES
??? bool "manpages on the target"
??? help
??? ? Leave the manpages on the target.
??? ? If you say n here, your target will not contain any
??? ? manpage.
config BR2_HAVE_INFOPAGES
??? bool "infopages on the target"
??? help
??? ? Leave the infopages on the target.
??? ? If you say n here, your target will not contain any
??? ? infopage.
config BR2_HAVE_DOCUMENTATION
??? bool "documentation on the target"
??? help
??? ? Leave the documentation on the target.
??? ? If you say n here, your target will not contain any
??? ? documentation.
config BR2_HAVE_DEVFILES
??? bool "development files in target filesystem"
??? help
??? ? Install headers and static libraries in the
??? ? target filesystem
source package/gnuconfig/Config.in
endmenu
source "toolchain/Config.in"
source "package/Config.in"
source "target/Config.in"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Sincerly,
Thomas
--
Looking forword to your help
Sudhir
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20090820/ae46446a/attachment-0001.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] unrecognised command line option Error
2009-08-20 9:30 ` suhas dumbhare
@ 2009-08-20 12:39 ` Thomas Petazzoni
2009-08-20 21:59 ` suhas dumbhare
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Petazzoni @ 2009-08-20 12:39 UTC (permalink / raw)
To: buildroot
Hello,
Could you please fix your e-mail client so that it sends answers
formatted according to the standards
(http://en.wikipedia.org/wiki/Usenet_quoting).
Le Thu, 20 Aug 2009 02:30:51 -0700 (PDT),
suhas dumbhare <s_dumbhare@yahoo.com> a ?crit :
> |??????????????????????????????????? .config? File
Sorry but what you posted is not your .config file, but the Config.in
file located at the root of Buildroot sources. The file .config really
starts with a dot. If you don't see it, it's because in Unix, files
started with a dot are hidden (you can see then by adding the -a option
to ls, or by properly configuring whatever graphical interface you're
using).
Sincerly,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] unrecognised command line option Error
2009-08-20 12:39 ` Thomas Petazzoni
@ 2009-08-20 21:59 ` suhas dumbhare
0 siblings, 0 replies; 6+ messages in thread
From: suhas dumbhare @ 2009-08-20 21:59 UTC (permalink / raw)
To: buildroot
Hello,
sudhir>Sorry for sending wrong file.Thank u for u r advice.
sudhir>
Start[.config]File>
?#
# Automatically generated make config: don't edit
# Thu Aug 20 05:18:13 2009
#
BR2_HAVE_DOT_CONFIG=y
BR2_VERSION="2009.05"
# BR2_alpha is not set
BR2_arm=y
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_cris is not set
# BR2_ia64 is not set
# BR2_i386 is not set
# BR2_m68k is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_nios2 is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_sparc64 is not set
# BR2_x86_64 is not set
# BR2_generic_arm is not set
BR2_arm7tdmi=y
# BR2_arm610 is not set
# BR2_arm710 is not set
# BR2_arm720t is not set
# BR2_arm920t is not set
# BR2_arm922t is not set
# BR2_arm926t is not set
# BR2_arm10t is not set
# BR2_arm1136jf_s is not set
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set
# BR2_sa110 is not set
# BR2_sa1100 is not set
# BR2_xscale is not set
# BR2_iwmmxt is not set
BR2_ARM_TYPE="ARM7TDMI"
BR2_ARM_OABI=y
# BR2_ARM_EABI is not set
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="arm7tdmi"
BR2_GCC_TARGET_ARCH="armv4t"
BR2_GCC_TARGET_ABI="apcs-gnu"
#
# Target options
#
#
# Project Options
#
BR2_PROJECT="ARM"
BR2_HOSTNAME="uclibc"
BR2_BANNER="Welcome to Buildroot"
#
# Preset Devices
#
# BR2_TARGET_AMD is not set
BR2_TARGET_ARMLTD=y
#
# ARM Ltd. based Device Support
#
BR2_TARGET_ARM_INTEGRATOR_926=y
# BR2_TARGET_ARM_INTEGRATOR_926_HUGE is not set
BR2_BOARD_NAME="integrator926"
BR2_BOARD_PATH="target/device/ARMLTD/$(BR2_BOARD_NAME)"
# BR2_TARGET_ATMEL is not set
# BR2_TARGET_KWIKBYTE is not set
#
# Generic System Support
#
# BR2_TARGET_GENERIC_ACCESS_POINT is not set
# BR2_TARGET_GENERIC_FIREWALL is not set
#
# Generic development system requires a toolchain with WCHAR and PROGRAM_INVOCATION support
#
# BR2_TARGET_GENERIC_GETTY is not set
#
# Build options
#
BR2_WGET="wget --passive-ftp -nd"
BR2_SVN_CO="svn co"
BR2_SVN_UP="svn up"
BR2_GIT="git clone"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(BASE_DIR)/dl"
BR2_COPYTO=""
#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://buildroot.net/downloads/sources/"
BR2_SOURCEFORGE_MIRROR="easynews"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"
#
# Atmel Mirrors
#
BR2_ATMEL_MIRROR="ftp://www.at91.com/pub/buildroot/"
BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
# BR2_FPU_SUFFIX is not set
BR2_TOPDIR_PREFIX=""
BR2_TOPDIR_SUFFIX=""
BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
BR2_GNU_TARGET_SUFFIX="linux-uclibc"
BR2_JLEVEL=1
# BR2_PREFER_IMA is not set
# BR2_DEPRECATED is not set
# BR2_RECENT is not set
# BR2_CONFIG_CACHE is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_MANPAGES is not set
# BR2_HAVE_INFOPAGES is not set
# BR2_HAVE_DOCUMENTATION is not set
# BR2_HAVE_DEVFILES is not set
# BR2_UPDATE_CONFIG is not set
#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
# BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set
BR2_TOOLCHAIN_SOURCE=y
BR2_EXT_GCC_VERSION_4_1_2=y
BR2_EXT_GCC_VERSION_4_2_1=y
BR2_EXT_GCC_VERSION_4_2_2=y
BR2_EXT_GCC_VERSION_4_2_3=y
BR2_EXT_BINUTILS_VERSION_2_17=y
BR2_EXT_BINUTILS_VERSION_2_18=y
BR2_EXT_UCLIBC_VERSION_0_9_28_3=y
BR2_EXT_UCLIBC_VERSION_0_9_29=y
BR2_EXT_UCLIBC_VERSION_0_9_30=y
BR2_EXT_UCLIBC_VERSION_0_9_30_1=y
#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_2_6_23 is not set
# BR2_KERNEL_HEADERS_2_6_24 is not set
# BR2_KERNEL_HEADERS_2_6_25 is not set
# BR2_KERNEL_HEADERS_2_6_26 is not set
# BR2_KERNEL_HEADERS_2_6_27 is not set
# BR2_KERNEL_HEADERS_2_6_28 is not set
BR2_KERNEL_HEADERS_2_6_29=y
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="2.6.29.4"
#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_28_3 is not set
# BR2_UCLIBC_VERSION_0_9_29 is not set
# BR2_UCLIBC_VERSION_0_9_30 is not set
BR2_UCLIBC_VERSION_0_9_30_1=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_VERSION_STRING="0.9.30.1"
BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.30.config"
# BR2_PTHREAD_DEBUG is not set
# BR2_UCLIBC_PROGRAM_INVOCATION is not set
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set
#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_17 is not set
# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
# BR2_BINUTILS_VERSION_2_18 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_3 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_6 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_8 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_9 is not set
# BR2_BINUTILS_VERSION_2_19 is not set
BR2_BINUTILS_VERSION_2_19_1=y
BR2_BINUTILS_VERSION="2.19.1"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
#
# GCC Options
#
# BR2_GCC_VERSION_3_4_6 is not set
# BR2_GCC_VERSION_4_0_4 is not set
# BR2_GCC_VERSION_4_1_2 is not set
# BR2_GCC_VERSION_4_2_1 is not set
# BR2_GCC_VERSION_4_2_2 is not set
# BR2_GCC_VERSION_4_2_3 is not set
# BR2_GCC_VERSION_4_2_4 is not set
# BR2_GCC_VERSION_4_3_1 is not set
# BR2_GCC_VERSION_4_3_2 is not set
BR2_GCC_VERSION_4_3_3=y
# BR2_GCC_VERSION_4_4_X is not set
BR2_GCC_SUPPORTS_SYSROOT=y
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.3.3"
# BR2_TOOLCHAIN_SYSROOT is not set
# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_GCC_CROSS_FORTRAN is not set
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
# BR2_GCC_SHARED_LIBGCC is not set
#
# Ccache Options
#
# BR2_CCACHE is not set
#
# Gdb Options
#
# BR2_PACKAGE_GDB is not set
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set
#
# Common Toolchain Options
#
# BR2_LARGEFILE is not set
# BR2_INET_IPV6 is not set
# BR2_INET_RPC is not set
# BR2_ENABLE_LOCALE is not set
# BR2_USE_WCHAR is not set
# BR2_SOFT_FLOAT is not set
# BR2_USE_SSP is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
BR2_PTHREADS_OLD=y
# BR2_PTHREADS_NATIVE is not set
# BR2_INSTALL_LIBSTDCPP is not set
BR2_TARGET_OPTIMIZATION="-Os -pipe"
# BR2_ELF2FLT is not set
# BR2_MKLIBS is not set
# BR2_PACKAGE_SSTRIP_TARGET is not set
# BR2_PACKAGE_SSTRIP_HOST is not set
# BR2_ENABLE_MULTILIB is not set
# BR2_VFP_FLOAT is not set
# BR2_CROSS_TOOLCHAIN_TARGET_UTILS is not set
#
# Package Selection for the target
#
# BR2_PACKAGE_BUSYBOX is not set
#
# The minimum needed to build a uClibc development system
#
BR2_PACKAGE_BASH=y
BR2_PACKAGE_BZIP2=y
#
# coreutils requires a toolchain with WCHAR and PROGRAM_INVOCATION support
#
# BR2_PACKAGE_DIFFUTILS is not set
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GCC_TARGET is not set
# BR2_PACKAGE_GREP is not set
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_PATCH is not set
#
# tar requires a toolchain with WCHAR and PROGRAM_INVOCATION support
#
#
# Other development stuff
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_CCACHE_TARGET is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
BR2_HOST_FAKEROOT=y
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_LIBGMP is not set
# BR2_PACKAGE_GPERF is not set
# BR2_PACKAGE_LIBMPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set
#
# oprofile requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_PKG_CONFIG is not set
# BR2_PACKAGE_READLINE is not set
# BR2_PACKAGE_PCRE is not set
#
# Other stuff
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_BEECRYPT is not set
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_BOOTUTILS is not set
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_CUSTOMIZE is not set
# BR2_PACKAGE_DASH is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GAMIN is not set
#
# icu requires a toolchain with C++ support and WCHAR enabled
#
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LESS is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
# BR2_PACKAGE_LIBICONV is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBOIL is not set
# BR2_PACKAGE_LIBSYSFS is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set
#
# logrotate???? - disabled (requires wchar support)
#
# BR2_PACKAGE_LSOF is not set
# BR2_PACKAGE_LTP-TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_MODULE_INIT_TOOLS is not set
# BR2_PACKAGE_NG_SPICE_REWORK is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_PROCPS is not set
# BR2_PACKAGE_PSMISC is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SHARED_MIME_INFO is not set
# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_SUDO is not set
# BR2_PACKAGE_SYSKLOGD is not set
# BR2_PACKAGE_SYSVINIT is not set
# BR2_PACKAGE_UTIL-LINUX is not set
# BR2_PACKAGE_WHICH is not set
#
# Database
#
#
# Mysql client requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_SQLITE is not set
#
# Text editors
#
# BR2_PACKAGE_ED is not set
# BR2_PACKAGE_NANO is not set
# BR2_PACKAGE_UEMACS is not set
# BR2_PACKAGE_VIM is not set
#
# Networking
#
#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
# BR2_PACKAGE_BOA is not set
#
# bind requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_BRIDGE is not set
# BR2_PACKAGE_ISC_DHCP is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_IFPLUGD is not set
#
# iperf requires a toolchain with C++ support enabled
#
#
# iproute2 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_IPSEC_TOOLS is not set
#
# iptables requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_KISMET is not set
# BR2_PACKAGE_L2TP is not set
# BR2_PACKAGE_LIBCGI is not set
#
# libcgicc requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBSOUP is not set
# BR2_PACKAGE_LIBUPNP is not set
# BR2_PACKAGE_LIGHTTPD is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MDNSRESPONDER is not set
# BR2_PACKAGE_MIIDIAG is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set
# BR2_PACKAGE_NCFTP is not set
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_NETCAT is not set
#
# netkitbase requires a toolchain with RPC support
#
# BR2_PACKAGE_NETKITTELNET is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
#
# nfs-utils requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_OLSR is not set
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
# BR2_PACKAGE_OPENSSL is not set
# BR2_PACKAGE_OPENVPN is not set
#
# portmap requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_RP_PPPOE is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
#
# quagga suite
#
# BR2_PACKAGE_QUAGGA_ZEBRA is not set
# BR2_PACKAGE_QUAGGA_BGPD is not set
# BR2_PACKAGE_QUAGGA_RIPD is not set
# BR2_PACKAGE_QUAGGA_RIPNGD is not set
# BR2_PACKAGE_QUAGGA_OSPFD is not set
# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
# BR2_PACKAGE_QUAGGA_ISISD is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_TFTPD is not set
# BR2_PACKAGE_THTTPD is not set
# BR2_PACKAGE_TINYHTTPD is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set
# BR2_PACKAGE_UDPCAST is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WEBIF is not set
# BR2_PACKAGE_WGET is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
# BR2_PACKAGE_WPA_SUPPLICANT is not set
#
# Hardware handling / blockdevices and filesystem maintenance
#
#
# dbus not available (need expat or libxml2)
#
#
# dbus-glib needs dbus to be compiled with expat support
#
# BR2_PACKAGE_DEVMEM2 is not set
#
# dm requires a toolchain with LARGEFILE support
#
#
# dmraid requires a toolchain with LARGEFILE support
#
#
# e2fsprogs requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
#
# libfuse requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_HAL is not set
# BR2_PACKAGE_HDPARM is not set
# BR2_PACKAGE_HOTPLUG is not set
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_LIBUSB is not set
# BR2_PACKAGE_LM_SENSORS is not set
# BR2_PACKAGE_LVM2 is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MKDOSFS is not set
BR2_PACKAGE_MTD=y
BR2_PACKAGE_MTD_UTILS=y
# BR2_PACKAGE_MTD_20061007 is not set
# BR2_PACKAGE_MTD_20050122 is not set
# BR2_PACKAGE_MTD_UTILS_GIT is not set
#
# MTD tools selection
#
# BR2_PACKAGE_MTD_DOCFDISK is not set
# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set
BR2_PACKAGE_MTD_FLASHCP=y
BR2_PACKAGE_MTD_FLASH_ERASE=y
BR2_PACKAGE_MTD_FLASH_ERASEALL=y
BR2_PACKAGE_MTD_FLASH_INFO=y
BR2_PACKAGE_MTD_FLASH_LOCK=y
BR2_PACKAGE_MTD_FLASH_UNLOCK=y
BR2_PACKAGE_MTD_FTL_CHECK=y
BR2_PACKAGE_MTD_FTL_FORMAT=y
BR2_PACKAGE_MTD_JFFS2DUMP=y
BR2_PACKAGE_MTD_MKFSJFFS2=y
# BR2_PACKAGE_MTD_MKFSJFFS is not set
BR2_PACKAGE_MTD_MTD_DEBUG=y
BR2_PACKAGE_MTD_NANDDUMP=y
BR2_PACKAGE_MTD_NANDWRITE=y
# BR2_PACKAGE_MTD_NFTL_FORMAT is not set
# BR2_PACKAGE_MTD_NFTLDUMP is not set
BR2_PACKAGE_MTD_SUMTOOL=y
#
# ntfs-3g requires a toolchain with LARGEFILE and WCHAR support
#
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SFDISK is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_UDEV is not set
# BR2_PACKAGE_USBMOUNT is not set
# BR2_PACKAGE_USBUTILS is not set
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_XFSPROGS is not set
#
# Audio and video libraries and applications
#
# BR2_PACKAGE_ALSA_LIB is not set
#
# alsa-utils requires a toolchain with LARGEFILE support
#
#
# asterisk??? - disabled (required openssl and mpg123)
#
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_FLAC is not set
# BR2_PACKAGE_GSTREAMER is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBMPD is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_FESTIVAL is not set
#
# taglib requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_VLC is not set
#
# Graphic libraries and applications (graphic/text)
#
#
# text rendering libraries
#
BR2_PACKAGE_NCURSES=y
# BR2_PACKAGE_NCURSES_TARGET_PANEL is not set
# BR2_PACKAGE_NCURSES_TARGET_FORM is not set
# BR2_PACKAGE_NCURSES_TARGET_MENU is not set
# BR2_PACKAGE_NCURSES_TARGET_HEADERS is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_SLANG is not set
#
# text rendering applications
#
# BR2_PACKAGE_DIALOG is not set
#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LIBART is not set
# BR2_PACKAGE_LIBPNG is not set
# BR2_PACKAGE_LIBUNGIF is not set
# BR2_PACKAGE_LINUX_FUSION is not set
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_SDL is not set
# BR2_PACKAGE_TIFF is not set
#
# busybox graphic applications
#
#
# --> May be broken in busybox
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FBSET is not set
#
# other GUIs
#
#
# qtopia4 requires a toolchain with C++ support enabled
#
BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_XSERVER_xorg is not set
# BR2_PACKAGE_XSERVER_tinyx is not set
#
# xorg requires a toolchain with C++, LOCALE, LARGEFILE and WCHAR support
#
#
# tinyx requires a toolchain with WCHAR support
#
#
# X libraries and helper libraries
#
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
# BR2_PACKAGE_TSLIB is not set
#
# webkit requires a toolchain with C++ support and WCHAR enabled
#
#
# X Window managers
#
# BR2_PACKAGE_MATCHBOX is not set
#
# X applications
#
# BR2_PACKAGE_ALSAMIXERGUI is not set
#
# dillo??? ??? - disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
#
# BR2_PACKAGE_GQVIEW is not set
# BR2_PACKAGE_GOB2 is not set
# BR2_PACKAGE_LEAFPAD is not set
#
# midori??? ??? - disabled (requires Xorg(7))
#
# BR2_PACKAGE_PCMANFM is not set
# BR2_PACKAGE_SYLPHEED is not set
# BR2_PACKAGE_TORSMO is not set
# BR2_PACKAGE_X11VNC is not set
# BR2_PACKAGE_XPDF is not set
# BR2_PACKAGE_XSTROKE is not set
# BR2_PACKAGE_XVKBD is not set
#
# Compressors / decompressors
#
# BR2_PACKAGE_GZIP is not set
BR2_PACKAGE_LZO=y
# BR2_PACKAGE_LZOP is not set
#
# lzma requires a toolchain with C++ support
#
# BR2_PACKAGE_LZMA_HOST is not set
BR2_PACKAGE_ZLIB=y
# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set
#
# Package managers
#
# BR2_PACKAGE_IPKG is not set
# BR2_PACKAGE_PORTAGE is not set
# BR2_PACKAGE_RPM is not set
#
# Interpreter languages / Scripting
#
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PYTHON is not set
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set
# BR2_PACKAGE_PHP is not set
#
# XML handling
#
# BR2_PACKAGE_EXPAT is not set
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set
#
# xerces-c++ requires a toolchain with C++ support enabled
#
#
# Java
#
# BR2_PACKAGE_CLASSPATH is not set
#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_MAGICCUBE4D is not set
# BR2_PACKAGE_PRBOOM is not set
# BR2_PACKAGE_RUBIX is not set
# BR2_PACKAGE_VICE is not set
# BR2_PACKAGE_XBOARD is not set
#
# Target filesystem options
#
BR2_ROOTFS_PREFIX="rootfs"
BR2_ROOTFS_SUFFIX=""
#
# filesystem for target device
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
BR2_TARGET_ROOTFS_JFFS2=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056 is not set
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
# BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K is not set
BR2_TARGET_ROOTFS_JFFS2_FLASH_128=y
# BR2_TARGET_ROOTFS_JFFS2_FLASH_64 is not set
# BR2_TARGET_ROOTFS_JFFS2_CUSTOM is not set
BR2_TARGET_ROOTFS_JFFS2_PAGESIZE=0x1000
BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
# BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER is not set
# BR2_JFFS2_TARGET_SREC is not set
# BR2_TARGET_ROOTFS_JFFS2_PAD is not set
BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
#
# bootloader for target device
#
# BR2_TARGET_UBOOT is not set
# BR2_TARGET_UBOOT_2009_03 is not set
# BR2_TARGET_UBOOT_2009_01 is not set
# BR2_TARGET_UBOOT_2008_10 is not set
# BR2_TARGET_UBOOT_1_3_4 is not set
# BR2_TARGET_UBOOT_1_2_0_ATMEL is not set
#
# Kernel
#
# BR2_KERNEL_none is not set
# BR2_KERNEL_LINUX_ADVANCED is not set
BR2_KERNEL_LINUX=y
# BR2_KERNEL_HURD is not set
BR2_PACKAGE_LINUX=y
BR2_PACKAGE_LINUX_KCONFIG=""
BR2_PACKAGE_LINUX_FORMAT=""
End[.config]File>
Sincerly,
Sudhir
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20090820/f9ce5b4c/attachment-0001.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-08-20 21:59 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-08-19 13:24 [Buildroot] unrecognised command line option Error suhas dumbhare
2009-08-19 19:52 ` Thomas Petazzoni
2009-08-20 8:07 ` suhas dumbhare
2009-08-20 9:30 ` suhas dumbhare
2009-08-20 12:39 ` Thomas Petazzoni
2009-08-20 21:59 ` suhas dumbhare
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox