[Buildroot] Problem with defconfig

[Buildroot] Problem with defconfig

[Mark Jackson]

If I pull down the latest git and try to make a defconfig,
I get the following:-

$ make atngw100-base_defconfig
make: *** No rule to make target `atngw100-base_defconfig'. Stop.

I've not used BR since the svn days, so has this changed ?

Regards
Mark

[Buildroot] Problem with defconfig

[Peter Korsgaard]

>>>>> "Mark" == Mark Jackson <mpfj-list@mimc.co.uk> writes:

 Mark> If I pull down the latest git and try to make a defconfig,
 Mark> I get the following:-

 Mark> $ make atngw100-base_defconfig
 Mark> make: *** No rule to make target `atngw100-base_defconfig'. Stop.

 Mark> I've not used BR since the svn days, so has this changed ?

It shouldn't, and it works here:

make atngw100-base_defconfig
cp ./target/device/Atmel/atngw100-base/atngw100-base_defconfig .config
...

Could you pull latest git and try again?

-- 
Bye, Peter Korsgaard

[Buildroot] Problem with defconfig

[Mark Jackson]

Peter Korsgaard wrote:
>>>>>> "Mark" == Mark Jackson <mpfj-list@mimc.co.uk> writes:
> 
>  Mark> If I pull down the latest git and try to make a defconfig,
>  Mark> I get the following:-
> 
>  Mark> $ make atngw100-base_defconfig
>  Mark> make: *** No rule to make target `atngw100-base_defconfig'. Stop.
> 
>  Mark> I've not used BR since the svn days, so has this changed ?
> 
> It shouldn't, and it works here:
> 
> make atngw100-base_defconfig
> cp ./target/device/Atmel/atngw100-base/atngw100-base_defconfig .config
> ...
> 
> Could you pull latest git and try again?

It *was* the latest git, which baffled me !!

[Buildroot] Problem with defconfig

[Peter Korsgaard]

>>>>> "Mark" == Mark Jackson <mpfj-list@mimc.co.uk> writes:

Hi,

 >> Could you pull latest git and try again?

 Mark> It *was* the latest git, which baffled me !!

Me too. Do you have
./target/device/Atmel/atngw100-base/atngw100-base_defconfig ?

-- 
Bye, Peter Korsgaard

[Buildroot] Problem with defconfig

[Mark Jackson]

Peter Korsgaard wrote:
>>>>>> "Mark" == Mark Jackson <mpfj-list@mimc.co.uk> writes:
> 
> Hi,
> 
>  >> Could you pull latest git and try again?
> 
>  Mark> It *was* the latest git, which baffled me !!
> 
> Me too. Do you have
> ./target/device/Atmel/atngw100-base/atngw100-base_defconfig ?
> 

mpfj at mpfj-x64:~/avr32/buildroot$ ls -la ./target/device/Atmel/atngw100-base/atngw100-base_defconfig
-rw-rw-rw- 1 mpfj mpfj 21720 2009-09-23 10:45 ./target/device/Atmel/atngw100-base/atngw100-base_defconfig
mpfj at mpfj-x64:~/avr32/buildroot$ make atngw100-base_defconfig
make: *** No rule to make target `atngw100-base_defconfig'. Stop.
mpfj at mpfj-x64:~/avr32/buildroot$ 

[Buildroot] Problem with defconfig

[Peter Korsgaard]

>>>>> "Mark" == Mark Jackson <mpfj-list@mimc.co.uk> writes:

Hi,

 Mark> mpfj at mpfj-x64:~/avr32/buildroot$ ls -la ./target/device/Atmel/atngw100-base/atngw100-base_defconfig
 Mark> -rw-rw-rw- 1 mpfj mpfj 21720 2009-09-23 10:45 ./target/device/Atmel/atngw100-base/atngw100-base_defconfig
 Mark> mpfj at mpfj-x64:~/avr32/buildroot$ make atngw100-base_defconfig
 Mark> make: *** No rule to make target `atngw100-base_defconfig'. Stop.
 Mark> mpfj at mpfj-x64:~/avr32/buildroot$ 

very odd. The makefile rule (in the toplevel Makefile) is simply:

%_defconfig: $(CONFIG)/conf
        cp $(shell find ./target/ -name $@) .config
        -@$(MAKE) oldconfig

So I don't get it why it doesn't trigger for you. Does a simple 'make
blah_defconfig' work for you?

Does it work with the 2009.08 release? What version of make are you using?

-- 
Bye, Peter Korsgaard

[Buildroot] Problem with defconfig

[Mark Jackson]

Peter Korsgaard wrote:
>>>>>> "Mark" == Mark Jackson <mpfj-list@mimc.co.uk> writes:
> 
> Hi,
> 
>  Mark> mpfj at mpfj-x64:~/avr32/buildroot$ ls -la ./target/device/Atmel/atngw100-base/atngw100-base_defconfig
>  Mark> -rw-rw-rw- 1 mpfj mpfj 21720 2009-09-23 10:45 ./target/device/Atmel/atngw100-base/atngw100-base_defconfig
>  Mark> mpfj at mpfj-x64:~/avr32/buildroot$ make atngw100-base_defconfig
>  Mark> make: *** No rule to make target `atngw100-base_defconfig'. Stop.
>  Mark> mpfj at mpfj-x64:~/avr32/buildroot$ 
> 
> very odd. The makefile rule (in the toplevel Makefile) is simply:
> 
> %_defconfig: $(CONFIG)/conf
>         cp $(shell find ./target/ -name $@) .config
>         -@$(MAKE) oldconfig

I looked at this and put in some @echo lines before and after the cp.
They were never executed !?!  Is this some bash / dash setup thing ?

mpfj at mpfj-x64:~/avr32/buildroot$ uname -a
Linux mpfj-x64 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 19:25:34 UTC 2009 x86_64 GNU/Linux

> So I don't get it why it doesn't trigger for you. Does a simple 'make
> blah_defconfig' work for you?

No ... everything comes up "no rule to make".

> Does it work with the 2009.08 release? What version of make are you using?

2009.08 release of buildroot ?  It's not out yet is it ?

mpfj at mpfj-x64:~/avr32/buildroot$ make -v
GNU Make 3.81
Copyright (C) 2006  Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.

This program built for x86_64-pc-linux-gnu

[Buildroot] Problem with defconfig

[Peter Korsgaard]

>>>>> "Mark" == Mark Jackson <mpfj-list@mimc.co.uk> writes:

Hi,

 >> %_defconfig: $(CONFIG)/conf
 >> cp $(shell find ./target/ -name $@) .config
 >> -@$(MAKE) oldconfig

 Mark> I looked at this and put in some @echo lines before and after the cp.
 Mark> They were never executed !?!  Is this some bash / dash setup thing ?

Well, they shouldn't as make complains that it doesn't know how to make
the rule, but I don't get why.

Does it work if you change the %_defconfig to atngw100-base_defconfig ?

 >> So I don't get it why it doesn't trigger for you. Does a simple 'make
 >> blah_defconfig' work for you?

 Mark> No ... everything comes up "no rule to make".

strange.

 >> Does it work with the 2009.08 release? What version of make are you using?

 Mark> 2009.08 release of buildroot ?  It's not out yet is it ?

Ehh, yes it is. We're no longer in August ;)

http://buildroot.net/downloads/buildroot-2009.08.tar.bz2

 Mark> mpfj at mpfj-x64:~/avr32/buildroot$ make -v
 Mark> GNU Make 3.81
 Mark> Copyright (C) 2006  Free Software Foundation, Inc.
 Mark> This is free software; see the source for copying conditions.
 Mark> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
 Mark> PARTICULAR PURPOSE.

Ok, I'm using 3.81 as well (Debian).

-- 
Bye, Peter Korsgaard

[Buildroot] Problem with defconfig

[Mark Jackson]

Peter Korsgaard wrote:
>>>>>> "Mark" == Mark Jackson <mpfj-list@mimc.co.uk> writes:
> 
> Hi,
> 
>  >> %_defconfig: $(CONFIG)/conf
>  >> cp $(shell find ./target/ -name $@) .config
>  >> -@$(MAKE) oldconfig
> 
>  Mark> I looked at this and put in some @echo lines before and after the cp.
>  Mark> They were never executed !?!  Is this some bash / dash setup thing ?
> 
> Well, they shouldn't as make complains that it doesn't know how to make
> the rule, but I don't get why.
> 
> Does it work if you change the %_defconfig to atngw100-base_defconfig ?

It's different ...

mpfj at mpfj-x64:~/avr32/buildroot$ make atngw100-base_defconfig
cc   package/config/conf.o   -o package/config/conf
package/config/conf.o: In function `conf_askvalue':
/home/mpfj/avr32/buildroot-git/package/config/conf.c:80: undefined reference to `sym_get_type'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:88: undefined reference to `sym_is_changable'
package/config/conf.o: In function `get_help':
/home/mpfj/avr32/buildroot-git/package/config/conf.c:45: undefined reference to `menu_has_help'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:46: undefined reference to `menu_get_help'
package/config/conf.o: In function `conf_sym':
/home/mpfj/avr32/buildroot-git/package/config/conf.c:166: undefined reference to `sym_get_type'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:182: undefined reference to `sym_tristate_within_range'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:186: undefined reference to `menu_has_help'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:189: undefined reference to `sym_get_string_value'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:180: undefined reference to `sym_tristate_within_range'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:184: undefined reference to `sym_tristate_within_range'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:186: undefined reference to `menu_has_help'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:220: undefined reference to `sym_set_tristate_value'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:220: undefined reference to `sym_set_tristate_value'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:220: undefined reference to `sym_set_tristate_value'
package/config/conf.o: In function `conf_string':
/home/mpfj/avr32/buildroot-git/package/config/conf.c:132: undefined reference to `sym_get_string_value'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:133: undefined reference to `sym_get_string_value'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:151: undefined reference to `sym_set_string_value'
package/config/conf.o: In function `conf':
/home/mpfj/avr32/buildroot-git/package/config/conf.c:353: undefined reference to `menu_is_visible'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:368: undefined reference to `menu_get_prompt'
package/config/conf.o: In function `conf_choice':
/home/mpfj/avr32/buildroot-git/package/config/conf.c:235: undefined reference to `sym_get_type'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:237: undefined reference to `sym_is_changable'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:263: undefined reference to `menu_get_prompt'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:268: undefined reference to `menu_is_visible'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:280: undefined reference to `menu_get_prompt'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:253: undefined reference to `menu_get_prompt'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:293: undefined reference to `menu_has_help'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:326: undefined reference to `menu_is_visible'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:271: undefined reference to `menu_get_prompt'
package/config/conf.o: In function `sym_set_choice_value':
/home/mpfj/avr32/buildroot-git/package/config/lkc.h:142: undefined reference to `sym_set_tristate_value'
package/config/conf.o: In function `conf_choice':
/home/mpfj/avr32/buildroot-git/package/config/conf.c:239: undefined reference to `sym_calc_value'
package/config/conf.o: In function `check_conf':
/home/mpfj/avr32/buildroot-git/package/config/conf.c:414: undefined reference to `menu_is_visible'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:419: undefined reference to `sym_is_changable'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:423: undefined reference to `menu_get_parent_menu'
package/config/conf.o: In function `main':
/home/mpfj/avr32/buildroot-git/package/config/conf.c:498: undefined reference to `conf_parse'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:546: undefined reference to `conf_read_simple'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:585: undefined reference to `rootmenu'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:584: undefined reference to `rootmenu'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:592: undefined reference to `rootmenu'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:601: undefined reference to `conf_get_changed'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:614: undefined reference to `conf_write_autoconf'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:601: undefined reference to `conf_write'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:517: undefined reference to `conf_read'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:527: undefined reference to `conf_read'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:577: undefined reference to `conf_set_all_new_symbols'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:568: undefined reference to `conf_set_all_new_symbols'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:574: undefined reference to `conf_set_all_new_symbols'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:571: undefined reference to `conf_set_all_new_symbols'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:580: undefined reference to `conf_set_all_new_symbols'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:555: undefined reference to `conf_get_changed'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:500: undefined reference to `conf_get_configname'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:548: undefined reference to `conf_read_simple'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:535: undefined reference to `conf_read_simple'
/home/mpfj/avr32/buildroot-git/package/config/conf.c:516: undefined reference to `conf_get_default_confname'
collect2: ld returned 1 exit status
make: *** [package/config/conf] Error 1
mpfj at mpfj-x64:~/avr32/buildroot$ 

> 
>  >> So I don't get it why it doesn't trigger for you. Does a simple 'make
>  >> blah_defconfig' work for you?
> 
>  Mark> No ... everything comes up "no rule to make".
> 
> strange.
> 
>  >> Does it work with the 2009.08 release? What version of make are you using?
> 
>  Mark> 2009.08 release of buildroot ?  It's not out yet is it ?
> 
> Ehh, yes it is. We're no longer in August ;)
> 
> http://buildroot.net/downloads/buildroot-2009.08.tar.bz2

Ah yes ... but weirdly the home cgit page at http://git.buildroot.net/buildroot
only shows 2009.08_rc2 as the latest tag.  Clicking on the [...] below the tag
list shows a different story ???

Mark

[Buildroot] Problem with defconfig

[Peter Korsgaard]

>>>>> "Mark" == Mark Jackson <mpfj-list@mimc.co.uk> writes:

Hi,

 Mark> Ah yes ... but weirdly the home cgit page at
 Mark> http://git.buildroot.net/buildroot only shows 2009.08_rc2 as the
 Mark> latest tag.  Clicking on the [...] below the tag list shows a
 Mark> different story ???

Yes I noticed as well earlier today. I've sent a mail to the osusl
admins to take a look at it. Strangely enough it's only broken for
buildroot and not uclibc/busybox.

-- 
Bye, Peter Korsgaard

[Buildroot] Problem with defconfig

[Mark Jackson]

Peter Korsgaard wrote:
>>>>>> "Mark" == Mark Jackson <mpfj-list@mimc.co.uk> writes:
> 
>  Mark> If I pull down the latest git and try to make a defconfig,
>  Mark> I get the following:-
> 
>  Mark> $ make atngw100-base_defconfig
>  Mark> make: *** No rule to make target `atngw100-base_defconfig'. Stop.

I've also noticed that "make saveconfig" does the same ...

mpfj at mpfj-x64:~/avr32/buildroot$ make saveconfig
make: *** No rule to make target `saveconfig'. Stop.

But "make", "make all" and "make menuconfig" are okay.

Mark

[Buildroot] Problem with defconfig

[Mark Jackson]

Peter Korsgaard wrote:

<snip>

> 
> %_defconfig: $(CONFIG)/conf
>         cp $(shell find ./target/ -name $@) .config
>         -@$(MAKE) oldconfig
> 
> So I don't get it why it doesn't trigger for you. Does a simple 'make
> blah_defconfig' work for you?

The makefile seems to be looking for the file, but can't find it:-

mpfj at mpfj-x64:~/avr32/buildroot$ make --debug atngw100-base_defconfig
GNU Make 3.81
Copyright (C) 2006  Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.

This program built for x86_64-pc-linux-gnu
Reading makefiles...
Updating goal targets....
 File `atngw100-base_defconfig' does not exist.
Must remake target `atngw100-base_defconfig'.
make: *** No rule to make target `atngw100-base_defconfig'. Stop.
mpfj at mpfj-x64:~/avr32/buildroot$ 

[Buildroot] Problem with defconfig

[Thiago A. Corrêa]

Hi,

On Thu, Sep 24, 2009 at 7:50 AM, Mark Jackson <mpfj-list@mimc.co.uk> wrote:
> Peter Korsgaard wrote:
>
> <snip>
>
>>
>> %_defconfig: $(CONFIG)/conf
>> ? ? ? ? cp $(shell find ./target/ -name $@) .config
>> ? ? ? ? -@$(MAKE) oldconfig
>>
>> So I don't get it why it doesn't trigger for you. Does a simple 'make
>> blah_defconfig' work for you?
>
> The makefile seems to be looking for the file, but can't find it:-
>

I didn't check, but I do remember that there was a clean up where the
atngw100 variations were removed. I think there is only
atngw100_defconfig now.

Kind Regards,
    Thiago A. Correa

[Buildroot] Problem with defconfig

[Peter Korsgaard]

>>>>> "Thiago" == Thiago A Corr?a <thiago.correa@gmail.com> writes:

 Thiago> I didn't check, but I do remember that there was a clean up where the
 Thiago> atngw100 variations were removed. I think there is only
 Thiago> atngw100_defconfig now.

No, the _base defconfig is still there.

find -name \*base\*defconfig
./Atmel/atngw100-base/atngw100-base_defconfig

-- 
Bye, Peter Korsgaard

[Buildroot] Foreigh toolchain

[Michael Trimarchi]

Hi,

I have this problem using the foreigh toolchain. Can anyone know how to fix
it?

libtool: relink: /usr/share/gnush4-nofpu_linux_v0701-1/bin/sh3-linux-gcc -Os -pipe -Os  --sysroot /home/michael/lavoro/renesas/buildroot/output/build/staging_dir/ -shared  .libs/gmodule.o   -Wl,-rpath -Wl,/home/michael/lavoro/renesas/buildroot/output/build/staging_dir/usr/lib -ldl -L/home/michael/lavoro/renesas/buildroot/output/target/usr/lib -L/usr/lib -lglib-2.0 -L/home/michael/lavoro/renesas/buildroot/output/build/staging_dir/usr/lib -L/home/michael/lavoro/renesas/buildroot/output/target/home/michael/lavoro/renesas/buildroot/output/build/staging_dir/usr/lib -lintl -lc  -Wl,--export-dynamic   -Wl,-soname -Wl,libgmodule-2.0.so.0 -o .libs/libgmodule-2.0.so.0.2000.5
/usr/lib/libdl.so: file not recognized: File format not recognized
collect2: ld returned 1 exit status
libtool: install: error: relink `libgmodule-2.0.la' with the above command before installing it





      

[Buildroot] Foreigh toolchain

[Thomas Petazzoni]

Le Thu, 24 Sep 2009 16:33:13 +0000 (GMT),
Michael Trimarchi <trimarchimichael@yahoo.it> a ?crit :

> I have this problem using the foreigh toolchain. Can anyone know how
> to fix it?

That's a libtool issue, and I haven't yet found the proper solution for
it. It's probably a matter of recompiling libtool and using our own.

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com

[Buildroot] Foreigh toolchain

[Michael Trimarchi]

--- Gio 24/9/09, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> ha scritto:

> Da: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Oggetto: Re: [Buildroot] Foreigh toolchain
> A: buildroot at busybox.net
> Data: Gioved? 24 settembre 2009, 20:28
> Le Thu, 24 Sep 2009 16:33:13 +0000
> (GMT),
> Michael Trimarchi <trimarchimichael@yahoo.it>
> a ?crit :
> 
> > I have this problem using the foreigh toolchain. Can
> anyone know how
> > to fix it?
> 
> That's a libtool issue, and I haven't yet found the proper
> solution for
> it. It's probably a matter of recompiling libtool and using
> our own.

Ok, I will try it and investigate on it.

Michael

> 
> Thomas
> -- 
> Thomas Petazzoni, Free Electrons
> Kernel, drivers and embedded Linux development,
> consulting, training and support.
> http://free-electrons.com
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot


      

[Buildroot] Foreigh toolchain

[Michael Trimarchi]

Hi 

--- Ven 25/9/09, Michael Trimarchi <trimarchimichael@yahoo.it> ha scritto:

> Da: Michael Trimarchi <trimarchimichael@yahoo.it>
> Oggetto: Re: [Buildroot] Foreigh toolchain
> A: buildroot at busybox.net, "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>
> Data: Venerd? 25 settembre 2009, 09:35
> 
> 
> --- Gio 24/9/09, Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ha scritto:
> 
> > Da: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> > Oggetto: Re: [Buildroot] Foreigh toolchain
> > A: buildroot at busybox.net
> > Data: Gioved? 24 settembre 2009, 20:28
> > Le Thu, 24 Sep 2009 16:33:13 +0000
> > (GMT),
> > Michael Trimarchi <trimarchimichael@yahoo.it>
> > a ?crit :
> > 
> > > I have this problem using the foreigh toolchain.
> Can
> > anyone know how
> > > to fix it?
> > 
> > That's a libtool issue, and I haven't yet found the
> proper
> > solution for
> > it. It's probably a matter of recompiling libtool and
> using
> > our own.
> 
> Ok, I will try it and investigate on it.
> 
> Michael

This compile the glib because the rpath of libtool is controlled
by prefixm but I don't know possiby regression. I just test
the package compilation, so at least we know somenthing

> 
> > 
> > Thomas
> > -- 
> > Thomas Petazzoni, Free Electrons
> > Kernel, drivers and embedded Linux development,
> > consulting, training and support.
> > http://free-electrons.com
> > _______________________________________________
> > buildroot mailing list
> > buildroot at busybox.net
> > http://lists.busybox.net/mailman/listinfo/buildroot
> 
> 
> 
>


      
-------------- next part --------------
A non-text attachment was scrubbed...
Name: glibc_toolchain.patch
Type: application/x-download
Size: 626 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20091208/6abbe127/attachment-0001.bin>