* [Buildroot] Patch: parted support
2009-10-08 15:30 [Buildroot] Patch: parted support Igor Serebryany
@ 2009-10-08 17:45 ` Bernhard Reutner-Fischer
2009-10-09 10:04 ` Thomas Petazzoni
0 siblings, 1 reply; 3+ messages in thread
From: Bernhard Reutner-Fischer @ 2009-10-08 17:45 UTC (permalink / raw)
To: buildroot
On Thu, Oct 08, 2009 at 10:30:36AM -0500, Igor Serebryany wrote:
>This patch adds GNU parted to buildroot. It's against the 2009.08
>release. The makefile could probaby be improved significantly, for
>instance enabling readline support if it's present in buildroot. But it
>works for now, and I've tested it under i686 and x86_64.
>
>Most of the credit should go to Marco Lazzarotto (m.lazzarotto at
>robox.it) who originally wrote the makefile. I simply modified it to use
>the latest version.
>
>To apply: "cd buildroot-2009.08; patch -p1 < parted.patch".
>
>--Igor
>diff -rpuN buildroot-2009.08/package/Config.in buildroot-2009.08.new/package/Config.in
>--- buildroot-2009.08/package/Config.in 2009-09-01 03:44:24.000000000 -0500
>+++ buildroot-2009.08.new/package/Config.in 2009-10-08 09:56:23.000000000 -0500
>@@ -264,6 +264,7 @@ source "package/memtester/Config.in"
> source "package/mtd/Config.in"
> source "package/ntfs-3g/Config.in"
> source "package/ntfsprogs/Config.in"
>+source "package/parted/Config.in"
> source "package/pciutils/Config.in"
> source "package/pcmcia/Config.in"
> source "package/setserial/Config.in"
>diff -rpuN buildroot-2009.08/package/parted/Config.in buildroot-2009.08.new/package/parted/Config.in
>--- buildroot-2009.08/package/parted/Config.in 1969-12-31 18:00:00.000000000 -0600
>+++ buildroot-2009.08.new/package/parted/Config.in 2009-10-08 09:55:48.000000000 -0500
>@@ -0,0 +1,6 @@
>+config BR2_PACKAGE_PARTED
>+ bool "parted"
>+ default n
>+ help
>+ GNU parted
>+ http://ftp.gnu.org/gnu/parted
>diff -rpuN buildroot-2009.08/package/parted/parted.mk buildroot-2009.08.new/package/parted/parted.mk
>--- buildroot-2009.08/package/parted/parted.mk 1969-12-31 18:00:00.000000000 -0600
>+++ buildroot-2009.08.new/package/parted/parted.mk 2009-10-08 09:55:48.000000000 -0500
>@@ -0,0 +1,70 @@
>+#############################################################
>+#
>+# parted
>+#
>+#############################################################
>+PARTED_VERSION:=1.9.0
nowadays packages have to be written differently, like (completely
untested):
cat >package/parted/parted.mk<<EOF
#############################################################
#
# parted
#
#############################################################
PARTED_VERSION:=1.9.0
PARTED_SOURCE:=parted-$(PARTED_VERSION).tar.gz
PARTED_SITE:=$(BR2_GNU_MIRROR)/parted
PARTED_CONF_OPT=$(if $(BR2_ENABLE_DEBUG),--enable-debug,--disable-debug)
ifeq ($(BR2_ENABLE_DEBUG),y)
PARTED_INSTALL_TARGET_OPT:=DESTDIR=$(TARGET_DIR)
INSTALLCMD='./install-sh -c' \
install
else
PARTED_INSTALL_TARGET_OPT:=DESTDIR=$(TARGET_DIR)
INSTALLCMD='./install-sh -c' \
STRIPPROG="$(TARGET_STRIP)" install-strip
endif
PARTED_CONF_OPT:= \
$(if $(BR2_PACKAGE_READLINE),,--without-readline) \
--disable-dynamic-loading \
--without-included-regex
$(eval $(call AUTOTARGETS,package,parted))
EOF
Can you please try to use this type of makefile?
See package/rsync/rsync.mk and others as examples.
TIA,
>+PARTED_SOURCE:=parted-$(PARTED_VERSION).tar.gz
>+PARTED_SITE:=http://ftp.gnu.org/gnu/parted/
>+PARTED_DIR:=$(BUILD_DIR)/parted-$(PARTED_VERSION)
>+PARTED_BINARY:=parted/parted
>+PARTED_TARGET_BINARY:=sbin/parted
>+PARTED_COMPILE_OPT:=--without-readline --disable-dynamic-loading --disable-nls --without-included-regex --disable-shared
>+
>+$(DL_DIR)/$(PARTED_SOURCE):
>+ $(WGET) -P $(DL_DIR) $(PARTED_SITE)/$(PARTED_SOURCE)
>+
>+$(PARTED_DIR)/.source: $(DL_DIR)/$(PARTED_SOURCE)
>+ $(ZCAT) $(DL_DIR)/$(PARTED_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
>+ touch $@
>+
>+parted-source: $(DL_DIR)/$(PARTED_SOURCE)
>+
>+$(PARTED_DIR)/.unpacked: $(DL_DIR)/$(PARTED_SOURCE)
>+ $(ZCAT) $(DL_DIR)/$(PARTED_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
>+ toolchain/patch-kernel.sh $(PARTED_DIR) package/parted/ parted\*.patch
>+ touch $@
>+
>+$(PARTED_DIR)/.configured: $(PARTED_DIR)/.unpacked
>+ (cd $(PARTED_DIR); rm -rf config.cache; \
>+ $(TARGET_CONFIGURE_OPTS) \
>+ $(TARGET_CONFIGURE_ARGS) \
>+ CFLAGS="$(TARGET_CFLAGS)" \
>+ ./configure \
>+ --target=$(GNU_TARGET_NAME) \
>+ --host=$(GNU_TARGET_NAME) \
>+ --build=$(GNU_HOST_NAME) \
>+ --prefix=/ \
>+ --sbindir=/sbin \
>+ $(PARTED_COMPILE_OPT) \
>+ )
>+ touch $@
>+
>+$(PARTED_DIR)/$(PARTED_BINARY): $(PARTED_DIR)/.configured
>+ $(MAKE) CC=$(TARGET_CC) -C $(PARTED_DIR)
>+
>+$(TARGET_DIR)/$(PARTED_TARGET_BINARY): $(PARTED_DIR)/$(PARTED_BINARY)
>+ $(MAKE1) PATH=$(TARGET_PATH) DESTDIR=$(TARGET_DIR) -C $(PARTED_DIR) install-exec
>+ rm -rf $(TARGET_DIR)/usr/man
>+ rm -rf $(TARGET_DIR)/usr/include
>+
>+parted: uclibc e2fsprogs $(TARGET_DIR)/$(PARTED_TARGET_BINARY)
>+
>+parted-source: $(DL_DIR)/$(PARTED_SOURCE)
>+
>+parted-clean:
>+ $(MAKE1) PATH=$(TARGET_PATH) DESTDIR=$(TARGET_DIR) -C $(PARTED_DIR) uninstall
>+ -$(MAKE) -C $(PARTED_DIR) clean
>+
>+parted-dirclean:
>+ rm -rf $(PARTED_DIR)
>+
>+#############################################################
>+#
>+# Toplevel Makefile options
>+#
>+#############################################################
>+
>+ifeq ($(strip $(BR2_PACKAGE_PARTED)),y)
>+TARGETS+=parted
>+endif
^ permalink raw reply [flat|nested] 3+ messages in thread