[Buildroot] Fwd: Ask for support.(buildroot).

[Buildroot] Fwd: Ask for support.(buildroot).

[Ahmed Soliman]

Dear Sir,

THIS IS MY PROBLEM ,

I dont know what i have to select and configure in the menu config of
bulidroot  TO  build my linux

I am buliding this embedded linux to work on this device spec.

VIA Eden Esther 1.2 GHz processor
AMI BIOS
SYSTEM CHIPST VIA CX700M
i/o chip  Winbond W83697
MEMORY 1GB DDR2


I NEED TO BOOT IT UP FROM COMPACT FLASH.


THANKS
Please help...


Eng . AHmed Badr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100615/a7f3aeee/attachment.html>

[Buildroot] Fwd: Ask for support.(buildroot).

[Michael S. Zick]

On Tue June 15 2010, Ahmed Soliman wrote:
> Dear Sir,
> 
> THIS IS MY PROBLEM ,
> 
> I dont know what i have to select and configure in the menu config of
> bulidroot  TO  build my linux
> 
> I am buliding this embedded linux to work on this device spec.
> 
> VIA Eden Esther 1.2 GHz processor
> AMI BIOS
> SYSTEM CHIPST VIA CX700M
> i/o chip  Winbond W83697
> MEMORY 1GB DDR2
>

Just pretend it is an x86 processor system with a couple
of exceptions on the kernel menu config where you select
the VIA processor (or not, it will run as an x86)

Your:
ARCH=x86 <bb command>
should otherwise do the job.

Mike
> 
> I NEED TO BOOT IT UP FROM COMPACT FLASH.
> 
> 
> THANKS
> Please help...
> 
> 
> Eng . AHmed Badr
>