* [Buildroot] How to make uImage compressed
@ 2010-11-12 16:55 Stefan Pachner
2010-11-23 21:57 ` Thomas Petazzoni
0 siblings, 1 reply; 2+ messages in thread
From: Stefan Pachner @ 2010-11-12 16:55 UTC (permalink / raw)
To: buildroot
Dear Forum,
I am new to buildroot. I am happy to be able to generate a booting
uImage for my board and wonder how to generate a compressed one. u-
boot is claming that my uImage is uncompressed.
Thanks for any help
regards
Stefan
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Buildroot] How to make uImage compressed
2010-11-12 16:55 [Buildroot] How to make uImage compressed Stefan Pachner
@ 2010-11-23 21:57 ` Thomas Petazzoni
0 siblings, 0 replies; 2+ messages in thread
From: Thomas Petazzoni @ 2010-11-23 21:57 UTC (permalink / raw)
To: buildroot
On Fri, 12 Nov 2010 17:55:41 +0100
Stefan Pachner <stefan_pachner@gmx.net> wrote:
> I am new to buildroot. I am happy to be able to generate a booting
> uImage for my board and wonder how to generate a compressed one. u-
> boot is claming that my uImage is uncompressed.
On ARM, the internal kernel compression is used, and not the
compression offered by mkimage/uImage. So even if mkimage claims your
image is not compressed, it in fact is.
Unless you're not talking about ARM, of course.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-11-23 21:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-12 16:55 [Buildroot] How to make uImage compressed Stefan Pachner
2010-11-23 21:57 ` Thomas Petazzoni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox