[Buildroot] No response after "Freeing init memory"

[Thomas Petazzoni <thomas.petazzoni@free-electrons.com>]

Hello,

On Mon, 21 Feb 2011 21:53:51 +0100
Zden?k Materna <zdenek.materna@gmail.com> wrote:

> I have problem with init. Kernel boots ok, but after message "Freeing init
> memory: 120K" there is no response (*), but system seems to be up (it
> responds to ping). I tried to change init=/linuxrc to init=/hello which is
> statically compiled hello world and after that I got kernel panic (**). I
> double checked all configuration, but I couldn't find nothing weird. I have
> Generic serial port configured and console is also configured in inittab.
> All is compiled with same toolchain with EABI. Where might be problem?
> Thanks for any advice.
> 
> My kernel command line: mem=64M console=ttyS0,115200 root=/dev/nfs rw
> nfsroot=192.168.1.37:/home/zdenal/nfsroot/,proto=tcp ip=dhcp init=/linuxrc.
> 
> Buildroot from git, kernel 2.6.33.7, uClibc 0.9.31, Busybox 1.18.

Could you post your Buildroot .config and kernel .config files, and the
full kernel boot log ?

Thanks,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com