* [Buildroot] Add two more packages
@ 2011-05-30 18:16 Daniel Mack
2011-05-30 18:16 ` [Buildroot] [PATCH 1/2] Add package acl Daniel Mack
2011-05-30 18:16 ` [Buildroot] [PATCH 2/2] Add package attr Daniel Mack
0 siblings, 2 replies; 11+ messages in thread
From: Daniel Mack @ 2011-05-30 18:16 UTC (permalink / raw)
To: buildroot
I originally wanted to bring udev to a newer version, but appearantly,
there's something broken with epoll in uclibc, so I postponed it.
However, I already added two packages which are dependencies to newer
versions of udev, and I think they could be merged independently.
Daniel
[PATCH 1/2] Add package acl
[PATCH 2/2] Add package attr
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 1/2] Add package acl
2011-05-30 18:16 [Buildroot] Add two more packages Daniel Mack
@ 2011-05-30 18:16 ` Daniel Mack
2011-05-30 18:54 ` Heiko Zuerker
2011-05-30 19:02 ` Thomas Petazzoni
2011-05-30 18:16 ` [Buildroot] [PATCH 2/2] Add package attr Daniel Mack
1 sibling, 2 replies; 11+ messages in thread
From: Daniel Mack @ 2011-05-30 18:16 UTC (permalink / raw)
To: buildroot
Signed-off-by: Daniel Mack <zonque@gmail.com>
---
package/Config.in | 1 +
package/acl/Config.in | 7 +++++++
package/acl/acl.mk | 27 +++++++++++++++++++++++++++
3 files changed, 35 insertions(+), 0 deletions(-)
create mode 100644 package/acl/Config.in
create mode 100644 package/acl/acl.mk
diff --git a/package/Config.in b/package/Config.in
index 40f523d..cefe90e 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -483,6 +483,7 @@ source "package/xmlstarlet/Config.in"
endmenu
menu "System tools"
+source "package/acl/Config.in"
if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
source "package/bootutils/Config.in"
endif
diff --git a/package/acl/Config.in b/package/acl/Config.in
new file mode 100644
index 0000000..0a07d1e
--- /dev/null
+++ b/package/acl/Config.in
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_ACL
+ bool "ACL tools"
+ depends on BR2_PACKAGE_ATTR
+ help
+ Commands for Manipulating POSIX Access Control Lists
+ See http://savannah.nongnu.org/projects/acl
+
diff --git a/package/acl/acl.mk b/package/acl/acl.mk
new file mode 100644
index 0000000..30faad1
--- /dev/null
+++ b/package/acl/acl.mk
@@ -0,0 +1,27 @@
+#############################################################
+#
+# acl
+#
+#############################################################
+ACL_VERSION = 2.2.51
+ACL_SOURCE = acl-$(ACL_VERSION).src.tar.gz
+ACL_SITE = http://mirror.its.uidaho.edu/pub/savannah/acl/
+ACL_LIBTOOL_PATCH = NO
+ACL_INSTALL_STAGING = YES
+ACL_INSTALL_TARGET = YES
+ACL_DEPENDENCIES = attr
+ACL_CONF_OPT = --enable-gettext=no
+
+define ACL_INSTALL_TARGET_CMDS
+ $(INSTALL) -m 0755 -D $(@D)/getfacl/.libs/getfacl $(TARGET_DIR)/usr/bin/
+ $(INSTALL) -m 0755 -D $(@D)/setfacl/.libs/setfacl $(TARGET_DIR)/usr/bin/
+ $(INSTALL) -m 0644 -D $(@D)/libacl/.libs/libacl.so* $(STAGING_DIR)/usr/lib/
+endef
+
+define ACL_INSTALL_STAGING_CMDS
+ test -d $(STAGING_DIR)/usr/include/acl/ || mkdir $(STAGING_DIR)/usr/include/acl/
+ $(INSTALL) -m 0644 -D $(@D)/include/*.h $(STAGING_DIR)/usr/include/acl/
+ $(SED) s,sys/acl.h,acl/acl.h, -i $(STAGING_DIR)/usr/include/acl/libacl.h
+endef
+
+$(eval $(call AUTOTARGETS,package,acl))
--
1.7.5.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 1/2] Add package acl
2011-05-30 18:16 ` [Buildroot] [PATCH 1/2] Add package acl Daniel Mack
@ 2011-05-30 18:54 ` Heiko Zuerker
2011-05-30 19:02 ` Thomas Petazzoni
1 sibling, 0 replies; 11+ messages in thread
From: Heiko Zuerker @ 2011-05-30 18:54 UTC (permalink / raw)
To: buildroot
I did send both of these packages in last year, but they never made it into
git....
--
Regards
Heiko Zuerker
http://www.devil-linux.org
> -----Original Message-----
> From: buildroot-bounces at busybox.net [mailto:buildroot-
> bounces at busybox.net] On Behalf Of Daniel Mack
> Sent: Monday, May 30, 2011 1:16 PM
> To: buildroot at busybox.net
> Subject: [Buildroot] [PATCH 1/2] Add package acl
>
> Signed-off-by: Daniel Mack <zonque@gmail.com>
> ---
> package/Config.in | 1 +
> package/acl/Config.in | 7 +++++++
> package/acl/acl.mk | 27 +++++++++++++++++++++++++++
> 3 files changed, 35 insertions(+), 0 deletions(-)
> create mode 100644 package/acl/Config.in
> create mode 100644 package/acl/acl.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index 40f523d..cefe90e 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -483,6 +483,7 @@ source "package/xmlstarlet/Config.in"
> endmenu
>
> menu "System tools"
> +source "package/acl/Config.in"
> if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
> source "package/bootutils/Config.in"
> endif
> diff --git a/package/acl/Config.in b/package/acl/Config.in
> new file mode 100644
> index 0000000..0a07d1e
> --- /dev/null
> +++ b/package/acl/Config.in
> @@ -0,0 +1,7 @@
> +config BR2_PACKAGE_ACL
> + bool "ACL tools"
> + depends on BR2_PACKAGE_ATTR
> + help
> + Commands for Manipulating POSIX Access Control Lists
> + See http://savannah.nongnu.org/projects/acl
> +
> diff --git a/package/acl/acl.mk b/package/acl/acl.mk
> new file mode 100644
> index 0000000..30faad1
> --- /dev/null
> +++ b/package/acl/acl.mk
> @@ -0,0 +1,27 @@
> +#########################################################
> ####
> +#
> +# acl
> +#
> +#########################################################
> ####
> +ACL_VERSION = 2.2.51
> +ACL_SOURCE = acl-$(ACL_VERSION).src.tar.gz
> +ACL_SITE = http://mirror.its.uidaho.edu/pub/savannah/acl/
> +ACL_LIBTOOL_PATCH = NO
> +ACL_INSTALL_STAGING = YES
> +ACL_INSTALL_TARGET = YES
> +ACL_DEPENDENCIES = attr
> +ACL_CONF_OPT = --enable-gettext=no
> +
> +define ACL_INSTALL_TARGET_CMDS
> + $(INSTALL) -m 0755 -D $(@D)/getfacl/.libs/getfacl
> $(TARGET_DIR)/usr/bin/
> + $(INSTALL) -m 0755 -D $(@D)/setfacl/.libs/setfacl
> $(TARGET_DIR)/usr/bin/
> + $(INSTALL) -m 0644 -D $(@D)/libacl/.libs/libacl.so*
> $(STAGING_DIR)/usr/lib/
> +endef
> +
> +define ACL_INSTALL_STAGING_CMDS
> + test -d $(STAGING_DIR)/usr/include/acl/ || mkdir
> $(STAGING_DIR)/usr/include/acl/
> + $(INSTALL) -m 0644 -D $(@D)/include/*.h
> $(STAGING_DIR)/usr/include/acl/
> + $(SED) s,sys/acl.h,acl/acl.h, -i
> $(STAGING_DIR)/usr/include/acl/libacl.h
> +endef
> +
> +$(eval $(call AUTOTARGETS,package,acl))
> --
> 1.7.5.1
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 1/2] Add package acl
2011-05-30 18:16 ` [Buildroot] [PATCH 1/2] Add package acl Daniel Mack
2011-05-30 18:54 ` Heiko Zuerker
@ 2011-05-30 19:02 ` Thomas Petazzoni
2011-05-31 9:06 ` Daniel Mack
1 sibling, 1 reply; 11+ messages in thread
From: Thomas Petazzoni @ 2011-05-30 19:02 UTC (permalink / raw)
To: buildroot
On Mon, 30 May 2011 20:16:29 +0200
Daniel Mack <zonque@gmail.com> wrote:
> +define ACL_INSTALL_TARGET_CMDS
> + $(INSTALL) -m 0755 -D $(@D)/getfacl/.libs/getfacl $(TARGET_DIR)/usr/bin/
> + $(INSTALL) -m 0755 -D $(@D)/setfacl/.libs/setfacl $(TARGET_DIR)/usr/bin/
> + $(INSTALL) -m 0644 -D $(@D)/libacl/.libs/libacl.so* $(STAGING_DIR)/usr/lib/
> +endef
> +
> +define ACL_INSTALL_STAGING_CMDS
> + test -d $(STAGING_DIR)/usr/include/acl/ || mkdir $(STAGING_DIR)/usr/include/acl/
> + $(INSTALL) -m 0644 -D $(@D)/include/*.h $(STAGING_DIR)/usr/include/acl/
> + $(SED) s,sys/acl.h,acl/acl.h, -i $(STAGING_DIR)/usr/include/acl/libacl.h
> +endef
Any reason to not use the default "make install" behaviour of the
package ? (And ditto for the attr package).
Regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 1/2] Add package acl
2011-05-30 19:02 ` Thomas Petazzoni
@ 2011-05-31 9:06 ` Daniel Mack
2011-05-31 12:47 ` Heiko Zuerker
0 siblings, 1 reply; 11+ messages in thread
From: Daniel Mack @ 2011-05-31 9:06 UTC (permalink / raw)
To: buildroot
On Mon, May 30, 2011 at 9:02 PM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
> On Mon, 30 May 2011 20:16:29 +0200
> Daniel Mack <zonque@gmail.com> wrote:
>
>> +define ACL_INSTALL_TARGET_CMDS
>> + ? ? $(INSTALL) -m 0755 -D $(@D)/getfacl/.libs/getfacl $(TARGET_DIR)/usr/bin/
>> + ? ? $(INSTALL) -m 0755 -D $(@D)/setfacl/.libs/setfacl $(TARGET_DIR)/usr/bin/
>> + ? ? $(INSTALL) -m 0644 -D $(@D)/libacl/.libs/libacl.so* $(STAGING_DIR)/usr/lib/
>> +endef
>> +
>> +define ACL_INSTALL_STAGING_CMDS
>> + ? ? test -d $(STAGING_DIR)/usr/include/acl/ || mkdir $(STAGING_DIR)/usr/include/acl/
>> + ? ? $(INSTALL) -m 0644 -D $(@D)/include/*.h $(STAGING_DIR)/usr/include/acl/
>> + ? ? $(SED) s,sys/acl.h,acl/acl.h, -i $(STAGING_DIR)/usr/include/acl/libacl.h
>> +endef
>
> Any reason to not use the default "make install" behaviour of the
> package ? (And ditto for the attr package).
The libtool crap failed for cross compilation in these cases, so these
workarounds are unfortunately necessary.
Daniel
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 1/2] Add package acl
2011-05-31 9:06 ` Daniel Mack
@ 2011-05-31 12:47 ` Heiko Zuerker
2011-05-31 16:18 ` Daniel Mack
2011-06-21 10:14 ` Yegor Yefremov
0 siblings, 2 replies; 11+ messages in thread
From: Heiko Zuerker @ 2011-05-31 12:47 UTC (permalink / raw)
To: buildroot
Quoting Daniel Mack <zonque@gmail.com>:
> On Mon, May 30, 2011 at 9:02 PM, Thomas Petazzoni
> <thomas.petazzoni@free-electrons.com> wrote:
>> On Mon, 30 May 2011 20:16:29 +0200
>> Daniel Mack <zonque@gmail.com> wrote:
>>
>>> +define ACL_INSTALL_TARGET_CMDS
>>> + ? ? $(INSTALL) -m 0755 -D $(@D)/getfacl/.libs/getfacl
>>> $(TARGET_DIR)/usr/bin/
>>> + ? ? $(INSTALL) -m 0755 -D $(@D)/setfacl/.libs/setfacl
>>> $(TARGET_DIR)/usr/bin/
>>> + ? ? $(INSTALL) -m 0644 -D $(@D)/libacl/.libs/libacl.so*
>>> $(STAGING_DIR)/usr/lib/
>>> +endef
>>> +
>>> +define ACL_INSTALL_STAGING_CMDS
>>> + ? ? test -d $(STAGING_DIR)/usr/include/acl/ || mkdir
>>> $(STAGING_DIR)/usr/include/acl/
>>> + ? ? $(INSTALL) -m 0644 -D $(@D)/include/*.h
>>> $(STAGING_DIR)/usr/include/acl/
>>> + ? ? $(SED) s,sys/acl.h,acl/acl.h, -i
>>> $(STAGING_DIR)/usr/include/acl/libacl.h
>>> +endef
>>
>> Any reason to not use the default "make install" behaviour of the
>> package ? (And ditto for the attr package).
>
> The libtool crap failed for cross compilation in these cases, so these
> workarounds are unfortunately necessary.
Actually this isn't necessary, please see my version of the patches.
--
Regards
Heiko Zuerker
http://www.devil-linux.org
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 1/2] Add package acl
2011-05-31 12:47 ` Heiko Zuerker
@ 2011-05-31 16:18 ` Daniel Mack
2011-06-21 10:14 ` Yegor Yefremov
1 sibling, 0 replies; 11+ messages in thread
From: Daniel Mack @ 2011-05-31 16:18 UTC (permalink / raw)
To: buildroot
On Tue, May 31, 2011 at 2:47 PM, Heiko Zuerker <heiko@zuerker.org> wrote:
>>> Any reason to not use the default "make install" behaviour of the
>>> package ? (And ditto for the attr package).
>>
>> The libtool crap failed for cross compilation in these cases, so these
>> workarounds are unfortunately necessary.
>
> Actually this isn't necessary, please see my version of the patches.
Hmm, ok. Let's bring your patches mainline then, and I'll test again later.
Thanks,
Daniel
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 1/2] Add package acl
2011-05-31 12:47 ` Heiko Zuerker
2011-05-31 16:18 ` Daniel Mack
@ 2011-06-21 10:14 ` Yegor Yefremov
2011-06-21 17:40 ` Heiko Zuerker
1 sibling, 1 reply; 11+ messages in thread
From: Yegor Yefremov @ 2011-06-21 10:14 UTC (permalink / raw)
To: buildroot
Am 31.05.2011 14:47, schrieb Heiko Zuerker:
>
> Quoting Daniel Mack <zonque@gmail.com>:
>
>> On Mon, May 30, 2011 at 9:02 PM, Thomas Petazzoni
>> <thomas.petazzoni@free-electrons.com> wrote:
>>> On Mon, 30 May 2011 20:16:29 +0200
>>> Daniel Mack <zonque@gmail.com> wrote:
>>>
>>>> +define ACL_INSTALL_TARGET_CMDS
>>>> + $(INSTALL) -m 0755 -D $(@D)/getfacl/.libs/getfacl $(TARGET_DIR)/usr/bin/
>>>> + $(INSTALL) -m 0755 -D $(@D)/setfacl/.libs/setfacl $(TARGET_DIR)/usr/bin/
>>>> + $(INSTALL) -m 0644 -D $(@D)/libacl/.libs/libacl.so* $(STAGING_DIR)/usr/lib/
>>>> +endef
>>>> +
>>>> +define ACL_INSTALL_STAGING_CMDS
>>>> + test -d $(STAGING_DIR)/usr/include/acl/ || mkdir $(STAGING_DIR)/usr/include/acl/
>>>> + $(INSTALL) -m 0644 -D $(@D)/include/*.h $(STAGING_DIR)/usr/include/acl/
>>>> + $(SED) s,sys/acl.h,acl/acl.h, -i $(STAGING_DIR)/usr/include/acl/libacl.h
>>>> +endef
>>>
>>> Any reason to not use the default "make install" behaviour of the
>>> package ? (And ditto for the attr package).
>>
>> The libtool crap failed for cross compilation in these cases, so these
>> workarounds are unfortunately necessary.
>
> Actually this isn't necessary, please see my version of the patches.
>
Any update on this issue?
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 1/2] Add package acl
2011-06-21 10:14 ` Yegor Yefremov
@ 2011-06-21 17:40 ` Heiko Zuerker
2011-06-28 8:35 ` Yegor Yefremov
0 siblings, 1 reply; 11+ messages in thread
From: Heiko Zuerker @ 2011-06-21 17:40 UTC (permalink / raw)
To: buildroot
Quoting Yegor Yefremov <yegor_sub1@visionsystems.de>:
> Am 31.05.2011 14:47, schrieb Heiko Zuerker:
>>
>> Quoting Daniel Mack <zonque@gmail.com>:
>>
>>> On Mon, May 30, 2011 at 9:02 PM, Thomas Petazzoni
>>> <thomas.petazzoni@free-electrons.com> wrote:
>>>> On Mon, 30 May 2011 20:16:29 +0200
>>>> Daniel Mack <zonque@gmail.com> wrote:
>>>>
>>>>> +define ACL_INSTALL_TARGET_CMDS
>>>>> + $(INSTALL) -m 0755 -D $(@D)/getfacl/.libs/getfacl
>>>>> $(TARGET_DIR)/usr/bin/
>>>>> + $(INSTALL) -m 0755 -D $(@D)/setfacl/.libs/setfacl
>>>>> $(TARGET_DIR)/usr/bin/
>>>>> + $(INSTALL) -m 0644 -D $(@D)/libacl/.libs/libacl.so*
>>>>> $(STAGING_DIR)/usr/lib/
>>>>> +endef
>>>>> +
>>>>> +define ACL_INSTALL_STAGING_CMDS
>>>>> + test -d $(STAGING_DIR)/usr/include/acl/ || mkdir
>>>>> $(STAGING_DIR)/usr/include/acl/
>>>>> + $(INSTALL) -m 0644 -D $(@D)/include/*.h
>>>>> $(STAGING_DIR)/usr/include/acl/
>>>>> + $(SED) s,sys/acl.h,acl/acl.h, -i
>>>>> $(STAGING_DIR)/usr/include/acl/libacl.h
>>>>> +endef
>>>>
>>>> Any reason to not use the default "make install" behaviour of the
>>>> package ? (And ditto for the attr package).
>>>
>>> The libtool crap failed for cross compilation in these cases, so these
>>> workarounds are unfortunately necessary.
>>
>> Actually this isn't necessary, please see my version of the patches.
>>
>
> Any update on this issue?
I don't believe that either version of the package has been added.
--
Regards
Heiko Zuerker
http://www.devil-linux.org
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 1/2] Add package acl
2011-06-21 17:40 ` Heiko Zuerker
@ 2011-06-28 8:35 ` Yegor Yefremov
0 siblings, 0 replies; 11+ messages in thread
From: Yegor Yefremov @ 2011-06-28 8:35 UTC (permalink / raw)
To: buildroot
Am 21.06.2011 19:40, schrieb Heiko Zuerker:
>
> Quoting Yegor Yefremov <yegor_sub1@visionsystems.de>:
>
>> Am 31.05.2011 14:47, schrieb Heiko Zuerker:
>>>
>>> Quoting Daniel Mack <zonque@gmail.com>:
>>>
>>>> On Mon, May 30, 2011 at 9:02 PM, Thomas Petazzoni
>>>> <thomas.petazzoni@free-electrons.com> wrote:
>>>>> On Mon, 30 May 2011 20:16:29 +0200
>>>>> Daniel Mack <zonque@gmail.com> wrote:
>>>>>
>>>>>> +define ACL_INSTALL_TARGET_CMDS
>>>>>> + $(INSTALL) -m 0755 -D $(@D)/getfacl/.libs/getfacl $(TARGET_DIR)/usr/bin/
>>>>>> + $(INSTALL) -m 0755 -D $(@D)/setfacl/.libs/setfacl $(TARGET_DIR)/usr/bin/
>>>>>> + $(INSTALL) -m 0644 -D $(@D)/libacl/.libs/libacl.so* $(STAGING_DIR)/usr/lib/
>>>>>> +endef
>>>>>> +
>>>>>> +define ACL_INSTALL_STAGING_CMDS
>>>>>> + test -d $(STAGING_DIR)/usr/include/acl/ || mkdir $(STAGING_DIR)/usr/include/acl/
>>>>>> + $(INSTALL) -m 0644 -D $(@D)/include/*.h $(STAGING_DIR)/usr/include/acl/
>>>>>> + $(SED) s,sys/acl.h,acl/acl.h, -i $(STAGING_DIR)/usr/include/acl/libacl.h
>>>>>> +endef
>>>>>
>>>>> Any reason to not use the default "make install" behaviour of the
>>>>> package ? (And ditto for the attr package).
>>>>
>>>> The libtool crap failed for cross compilation in these cases, so these
>>>> workarounds are unfortunately necessary.
>>>
>>> Actually this isn't necessary, please see my version of the patches.
>>>
>>
>> Any update on this issue?
>
> I don't believe that either version of the package has been added.
I just sent new patch combined of yours and Daniels. Please review.
Best regards,
Yegor
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 2/2] Add package attr
2011-05-30 18:16 [Buildroot] Add two more packages Daniel Mack
2011-05-30 18:16 ` [Buildroot] [PATCH 1/2] Add package acl Daniel Mack
@ 2011-05-30 18:16 ` Daniel Mack
1 sibling, 0 replies; 11+ messages in thread
From: Daniel Mack @ 2011-05-30 18:16 UTC (permalink / raw)
To: buildroot
---
package/Config.in | 1 +
package/attr/Config.in | 6 ++++++
package/attr/attr.mk | 25 +++++++++++++++++++++++++
3 files changed, 32 insertions(+), 0 deletions(-)
create mode 100644 package/attr/Config.in
create mode 100644 package/attr/attr.mk
diff --git a/package/Config.in b/package/Config.in
index cefe90e..84bb761 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -484,6 +484,7 @@ endmenu
menu "System tools"
source "package/acl/Config.in"
+source "package/attr/Config.in"
if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
source "package/bootutils/Config.in"
endif
diff --git a/package/attr/Config.in b/package/attr/Config.in
new file mode 100644
index 0000000..766c346
--- /dev/null
+++ b/package/attr/Config.in
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_ATTR
+ bool "attr"
+ help
+ Commands for Manipulating Filesystem Extended Attributes
+ See http://savannah.nongnu.org/projects/attr
+
diff --git a/package/attr/attr.mk b/package/attr/attr.mk
new file mode 100644
index 0000000..3f76bd4
--- /dev/null
+++ b/package/attr/attr.mk
@@ -0,0 +1,25 @@
+#############################################################
+#
+# attr
+#
+#############################################################
+ATTR_VERSION = 2.4.46
+ATTR_SOURCE = attr-$(ATTR_VERSION).src.tar.gz
+ATTR_SITE = http://mirror.its.uidaho.edu/pub/savannah/attr/
+ATTR_LIBTOOL_PATCH = NO
+ATTR_INSTALL_STAGING = YES
+ATTR_INSTALL_TARGET = YES
+ATTR_CONF_OPT = --enable-gettext=no
+
+define ATTR_INSTALL_TARGET_CMDS
+ $(INSTALL) -m 0755 -D $(@D)/getfattr/.libs/getfattr $(TARGET_DIR)/usr/bin/
+ $(INSTALL) -m 0755 -D $(@D)/setfattr/.libs/setfattr $(TARGET_DIR)/usr/bin/
+ $(INSTALL) -m 0644 -D $(@D)/libattr/.libs/libattr.so* $(STAGING_DIR)/usr/lib/
+endef
+
+define ATTR_INSTALL_STAGING_CMDS
+ test -d $(STAGING_DIR)/usr/include/attr/ || mkdir $(STAGING_DIR)/usr/include/attr/
+ $(INSTALL) -m 0644 -D $(@D)/include/*.h $(STAGING_DIR)/usr/include/attr/
+endef
+
+$(eval $(call AUTOTARGETS,package,attr))
--
1.7.5.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
end of thread, other threads:[~2011-06-28 8:35 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-30 18:16 [Buildroot] Add two more packages Daniel Mack
2011-05-30 18:16 ` [Buildroot] [PATCH 1/2] Add package acl Daniel Mack
2011-05-30 18:54 ` Heiko Zuerker
2011-05-30 19:02 ` Thomas Petazzoni
2011-05-31 9:06 ` Daniel Mack
2011-05-31 12:47 ` Heiko Zuerker
2011-05-31 16:18 ` Daniel Mack
2011-06-21 10:14 ` Yegor Yefremov
2011-06-21 17:40 ` Heiko Zuerker
2011-06-28 8:35 ` Yegor Yefremov
2011-05-30 18:16 ` [Buildroot] [PATCH 2/2] Add package attr Daniel Mack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox