* [Buildroot] Fwd: Unable to mount root fs on unknown-block(0,0)
2011-09-09 6:28 ` Yegor Yefremov
2011-09-09 17:38 ` Marc Leclerc
@ 2011-09-09 20:29 ` Marc Leclerc
1 sibling, 0 replies; 5+ messages in thread
From: Marc Leclerc @ 2011-09-09 20:29 UTC (permalink / raw)
To: buildroot
Hi,
I've managed to boot the system by changing the ide mode in the bios and
playing with the ATA suport in the kernel but i am getting weird
warnings about ide in the boot log. I am aware that this may not be the
group to post this to but I have attached the log in any case and if
anyone knows where I could post this to please let me know.
Thank you for our time
Marc
Aug 17 08:12:12 buildroot syslog.info syslogd started: BusyBox v1.18.5
Aug 17 08:12:12 buildroot user.notice kernel: klogd started: BusyBox
v1.18.5 (2011-09-08 16:26:33 EDT)
Aug 17 08:12:12 buildroot user.notice kernel: Linux version 3.0.4
(marc at Vostro-Linux) (gcc version 4.4.3 (crosstool-NG 1.12.1 - buildroot
2011.08) ) #2 Thu Sep 8 17:01:01 EDT 2011
Aug 17 08:12:12 buildroot user.err kernel: CPU: vendor_id 'Vortex86 SoC'
unknown, using generic init.
Aug 17 08:12:12 buildroot user.err kernel: CPU: Your system may be unstable.
Aug 17 08:12:12 buildroot user.info kernel: BIOS-provided physical RAM map:
Aug 17 08:12:12 buildroot user.info kernel: BIOS-e820: 0000000000000000
- 000000000009fc00 (usable)
Aug 17 08:12:12 buildroot user.info kernel: BIOS-e820: 000000000009fc00
- 00000000000a0000 (reserved)
Aug 17 08:12:12 buildroot user.info kernel: BIOS-e820: 00000000000e4000
- 0000000000100000 (reserved)
Aug 17 08:12:12 buildroot user.info kernel: BIOS-e820: 0000000000100000
- 0000000020000000 (usable)
Aug 17 08:12:12 buildroot user.info kernel: BIOS-e820: 00000000ff000000
- 0000000100000000 (reserved)
Aug 17 08:12:12 buildroot user.notice kernel: Notice: NX (Execute
Disable) protection missing in CPU!
Aug 17 08:12:12 buildroot user.info kernel: DMI not present or invalid.
Aug 17 08:12:12 buildroot user.debug kernel: e820 update range:
0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Aug 17 08:12:12 buildroot user.debug kernel: e820 remove range:
00000000000a0000 - 0000000000100000 (usable)
Aug 17 08:12:12 buildroot user.info kernel: last_pfn = 0x20000
max_arch_pfn = 0x100000
Aug 17 08:12:12 buildroot user.debug kernel: initial memory mapped : 0 -
00800000
Aug 17 08:12:12 buildroot user.debug kernel: Base memory trampoline at
[c009e000] 9e000 size 4096
Aug 17 08:12:12 buildroot user.info kernel: init_memory_mapping:
0000000000000000-0000000020000000
Aug 17 08:12:12 buildroot user.debug kernel: 0000000000 - 0020000000
page 4k
Aug 17 08:12:12 buildroot user.debug kernel: kernel direct mapping
tables up to 20000000 @ 77d000-800000
Aug 17 08:12:12 buildroot user.notice kernel: 512MB LOWMEM available.
Aug 17 08:12:12 buildroot user.info kernel: mapped low ram: 0 - 20000000
Aug 17 08:12:12 buildroot user.info kernel: low ram: 0 - 20000000
Aug 17 08:12:12 buildroot user.warn kernel: Zone PFN ranges:
Aug 17 08:12:12 buildroot user.warn kernel: DMA 0x00000010 ->
0x00001000
Aug 17 08:12:12 buildroot user.warn kernel: Normal 0x00001000 ->
0x00020000
Aug 17 08:12:12 buildroot user.warn kernel: Movable zone start PFN for
each node
Aug 17 08:12:12 buildroot user.warn kernel: early_node_map[2] active PFN
ranges
Aug 17 08:12:12 buildroot user.warn kernel: 0: 0x00000010 -> 0x0000009f
Aug 17 08:12:12 buildroot user.warn kernel: 0: 0x00000100 -> 0x00020000
Aug 17 08:12:12 buildroot user.debug kernel: On node 0 totalpages: 130959
Aug 17 08:12:12 buildroot user.debug kernel: free_area_init_node: node
0, pgdat c03eb748, node_mem_map dfc00200
Aug 17 08:12:12 buildroot user.debug kernel: DMA zone: 32 pages used
for memmap
Aug 17 08:12:12 buildroot user.debug kernel: DMA zone: 0 pages reserved
Aug 17 08:12:12 buildroot user.debug kernel: DMA zone: 3951 pages,
LIFO batch:0
Aug 17 08:12:12 buildroot user.debug kernel: Normal zone: 992 pages
used for memmap
Aug 17 08:12:12 buildroot user.debug kernel: Normal zone: 125984
pages, LIFO batch:31
Aug 17 08:12:12 buildroot user.info kernel: Allocating PCI resources
starting at 20000000 (gap: 20000000:df000000)
Aug 17 08:12:12 buildroot user.debug kernel: pcpu-alloc: s0 r0 d32768
u32768 alloc=1*32768
Aug 17 08:12:12 buildroot user.debug kernel: pcpu-alloc: [0] 0
Aug 17 08:12:12 buildroot user.warn kernel: Built 1 zonelists in Zone
order, mobility grouping on. Total pages: 129935
Aug 17 08:12:12 buildroot user.notice kernel: Kernel command line: rw
root=/dev/hda1 init=/linuxrc BOOT_IMAGE=bzImage
Aug 17 08:12:12 buildroot user.info kernel: PID hash table entries: 2048
(order: 1, 8192 bytes)
Aug 17 08:12:12 buildroot user.info kernel: Dentry cache hash table
entries: 65536 (order: 6, 262144 bytes)
Aug 17 08:12:12 buildroot user.info kernel: Inode-cache hash table
entries: 32768 (order: 5, 131072 bytes)
Aug 17 08:12:12 buildroot user.info kernel: Initializing CPU#0
Aug 17 08:12:12 buildroot user.info kernel: Memory: 515428k/524288k
available (2112k kernel code, 8408k reserved, 894k data, 232k init, 0k
highmem)
Aug 17 08:12:12 buildroot user.info kernel: virtual kernel memory layout:
Aug 17 08:12:12 buildroot user.info kernel: fixmap : 0xfffe4000 -
0xfffff000 ( 108 kB)
Aug 17 08:12:12 buildroot user.info kernel: vmalloc : 0xe0800000 -
0xfffe2000 ( 503 MB)
Aug 17 08:12:12 buildroot user.info kernel: lowmem : 0xc0000000 -
0xe0000000 ( 512 MB)
Aug 17 08:12:12 buildroot user.info kernel: .init : 0xc03f0000 -
0xc042a000 ( 232 kB)
Aug 17 08:12:12 buildroot user.info kernel: .data : 0xc03102f6 -
0xc03efc00 ( 894 kB)
Aug 17 08:12:12 buildroot user.info kernel: .text : 0xc0100000 -
0xc03102f6 (2112 kB)
Aug 17 08:12:12 buildroot user.info kernel: Checking if this processor
honours the WP bit even in supervisor mode...Ok.
Aug 17 08:12:12 buildroot user.info kernel: NR_IRQS:16
Aug 17 08:12:12 buildroot user.debug kernel: CPU 0 irqstacks,
hard=df404000 soft=df406000
Aug 17 08:12:12 buildroot user.info kernel: Console: colour VGA+ 80x25
Aug 17 08:12:12 buildroot user.info kernel: console [tty0] enabled
Aug 17 08:12:12 buildroot user.warn kernel: Fast TSC calibration using PIT
Aug 17 08:12:12 buildroot user.warn kernel: Detected 933.292 MHz processor.
Aug 17 08:12:12 buildroot user.info kernel: Calibrating delay loop
(skipped), value calculated using timer frequency.. 1866.58 BogoMIPS
(lpj=3733168)
Aug 17 08:12:12 buildroot user.info kernel: pid_max: default: 32768
minimum: 301
Aug 17 08:12:12 buildroot user.info kernel: Mount-cache hash table
entries: 512
Aug 17 08:12:12 buildroot user.info kernel: CPU: Vortex86 SoC 05/02
stepping 02
Aug 17 08:12:12 buildroot user.info kernel: Performance Events:
Aug 17 08:12:12 buildroot user.info kernel: NET: Registered protocol
family 16
Aug 17 08:12:12 buildroot user.info kernel: PCI: PCI BIOS revision 3.00
entry at 0xf0031, last bus=0
Aug 17 08:12:12 buildroot user.info kernel: PCI: Using configuration
type 1 for base access
Aug 17 08:12:12 buildroot user.info kernel: bio: create slab <bio-0> at 0
Aug 17 08:12:12 buildroot user.info kernel: vgaarb: loaded
Aug 17 08:12:12 buildroot user.notice kernel: SCSI subsystem initialized
Aug 17 08:12:12 buildroot user.info kernel: usbcore: registered new
interface driver usbfs
Aug 17 08:12:12 buildroot user.info kernel: usbcore: registered new
interface driver hub
Aug 17 08:12:12 buildroot user.info kernel: usbcore: registered new
device driver usb
Aug 17 08:12:12 buildroot user.info kernel: pps_core: LinuxPPS API ver.
1 registered
Aug 17 08:12:12 buildroot user.info kernel: pps_core: Software ver.
5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Aug 17 08:12:12 buildroot user.info kernel: PTP clock support registered
Aug 17 08:12:12 buildroot user.warn kernel: PCI: Probing PCI hardware
Aug 17 08:12:12 buildroot user.debug kernel: PCI: Probing PCI hardware
(bus 00)
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:00.0:
[17f3:6021] type 0 class 0x000600
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:03.0:
[18ca:0020] type 0 class 0x000300
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:03.0: reg 10:
[mem 0xf8000000-0xfbffffff pref]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:03.0: reg 14:
[mem 0xfefc0000-0xfeffffff]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:03.0: reg 18:
[io 0xef80-0xefff]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:03.0: reg 30:
[mem 0xfefb0000-0xfefb7fff pref]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:03.0: supports
D1 D2
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:07.0:
[17f3:6031] type 0 class 0x000601
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:08.0:
[17f3:6040] type 0 class 0x000200
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:08.0: reg 10:
[io 0xec00-0xecff]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:08.0: reg 14:
[mem 0xfefaf800-0xfefaf8ff]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:08.0: reg 30:
[mem 0xfef90000-0xfef9ffff pref]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:0b.0:
[17f3:6060] type 0 class 0x000c03
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:0b.0: reg 10:
[mem 0xfefae000-0xfefaefff]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:0b.1:
[17f3:6061] type 0 class 0x000c03
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:0b.1: reg 10:
[mem 0xfefafc00-0xfefafcff]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:0c.0:
[8086:24db] type 0 class 0x000101
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:0c.0: reg 10:
[io 0xef00-0xef07]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:0c.0: reg 14:
[io 0xee80-0xee83]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:0c.0: reg 18:
[io 0xee00-0xee07]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:0c.0: reg 1c:
[io 0xed80-0xed83]
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:0c.0: reg 20:
[io 0xed00-0xed0f]
Aug 17 08:12:12 buildroot user.info kernel: vgaarb: device added:
PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none
Aug 17 08:12:12 buildroot user.info kernel: pci 0000:00:07.0: default
IRQ router [17f3:6031]
Aug 17 08:12:12 buildroot user.debug kernel: PCI: pci_cache_line_size
set to 32 bytes
Aug 17 08:12:12 buildroot user.debug kernel: reserve RAM buffer:
000000000009fc00 - 000000000009ffff
Aug 17 08:12:12 buildroot user.info kernel: Switching to clocksource pit
Aug 17 08:12:12 buildroot user.debug kernel: PCI: max bus depth: 0
pci_try_num: 1
Aug 17 08:12:12 buildroot user.debug kernel: pci_bus 0000:00: resource 0
[io 0x0000-0xffff]
Aug 17 08:12:12 buildroot user.debug kernel: pci_bus 0000:00: resource 1
[mem 0x00000000-0xffffffff]
Aug 17 08:12:12 buildroot user.info kernel: NET: Registered protocol
family 2
Aug 17 08:12:12 buildroot user.info kernel: IP route cache hash table
entries: 4096 (order: 2, 16384 bytes)
Aug 17 08:12:12 buildroot user.info kernel: TCP established hash table
entries: 16384 (order: 5, 131072 bytes)
Aug 17 08:12:12 buildroot user.info kernel: TCP bind hash table entries:
16384 (order: 4, 65536 bytes)
Aug 17 08:12:12 buildroot user.info kernel: TCP: Hash tables configured
(established 16384 bind 16384)
Aug 17 08:12:12 buildroot user.info kernel: TCP reno registered
Aug 17 08:12:12 buildroot user.info kernel: UDP hash table entries: 256
(order: 0, 4096 bytes)
Aug 17 08:12:12 buildroot user.info kernel: UDP-Lite hash table entries:
256 (order: 0, 4096 bytes)
Aug 17 08:12:12 buildroot user.info kernel: NET: Registered protocol
family 1
Aug 17 08:12:12 buildroot user.info kernel: RPC: Registered named UNIX
socket transport module.
Aug 17 08:12:12 buildroot user.info kernel: RPC: Registered udp
transport module.
Aug 17 08:12:12 buildroot user.info kernel: RPC: Registered tcp
transport module.
Aug 17 08:12:12 buildroot user.info kernel: RPC: Registered tcp NFSv4.1
backchannel transport module.
Aug 17 08:12:12 buildroot user.debug kernel: pci 0000:00:03.0: Boot
video device
Aug 17 08:12:12 buildroot user.debug kernel: PCI: CLS 16 bytes, default 32
Aug 17 08:12:12 buildroot user.info kernel: platform rtc_cmos:
registered platform RTC device (no PNP device found)
Aug 17 08:12:12 buildroot user.info kernel: Installing knfsd (copyright
(C) 1996 okir at monad.swb.de).
Aug 17 08:12:12 buildroot user.info kernel: msgmni has been set to 1006
Aug 17 08:12:12 buildroot user.info kernel: Block layer SCSI generic
(bsg) driver version 0.4 loaded (major 251)
Aug 17 08:12:12 buildroot user.info kernel: io scheduler noop registered
Aug 17 08:12:12 buildroot user.info kernel: io scheduler deadline
registered (default)
Aug 17 08:12:12 buildroot user.info kernel: sisfb: Video ROM found
Aug 17 08:12:12 buildroot user.info kernel: sisfb 0000:00:03.0: Z9 detected
Aug 17 08:12:12 buildroot user.info kernel: sisfb: Video RAM at
0xf8000000, mapped to 0xe0880000, size 32768k
Aug 17 08:12:12 buildroot user.info kernel: sisfb: MMIO at 0xfefc0000,
mapped to 0xe2900000, size 256k
Aug 17 08:12:12 buildroot user.info kernel: sisfb: Memory heap starting
at 32544K, size 32K
Aug 17 08:12:12 buildroot user.info kernel: sisfb: CRT1 DDC probing failed
Aug 17 08:12:12 buildroot user.info kernel: sisfb: Default mode is
800x600x8 (60Hz)
Aug 17 08:12:12 buildroot user.debug kernel: sisfb: Initial vbflags 0x0
Aug 17 08:12:12 buildroot user.debug kernel: sisfb: Failed to add MTRRs
Aug 17 08:12:12 buildroot user.info kernel: Console: switching to colour
frame buffer device 100x37
Aug 17 08:12:12 buildroot user.info kernel: sisfb: 2D acceleration is
enabled, y-panning enabled (auto-max)
Aug 17 08:12:12 buildroot user.info kernel: fb0: XGI Z7 frame buffer
device version 1.8.9
Aug 17 08:12:12 buildroot user.info kernel: sisfb: Copyright (C)
2001-2005 Thomas Winischhofer
Aug 17 08:12:12 buildroot user.info kernel: isapnp: Scanning for PnP
cards...
Aug 17 08:12:12 buildroot user.info kernel: isapnp: No Plug & Play
device found
Aug 17 08:12:12 buildroot user.info kernel: Serial: 8250/16550 driver,
12 ports, IRQ sharing enabled
Aug 17 08:12:12 buildroot user.info kernel: Switching to clocksource tsc
Aug 17 08:12:12 buildroot user.info kernel: serial8250: ttyS0 at I/O
0x3f8 (irq = 4) is a 16550A
Aug 17 08:12:12 buildroot user.info kernel: serial8250: ttyS1 at I/O
0x2f8 (irq = 3) is a 16550A
Aug 17 08:12:12 buildroot user.info kernel: serial8250: ttyS2 at I/O
0x3e8 (irq = 10) is a 16550A
Aug 17 08:12:12 buildroot user.info kernel: serial8250: ttyS3 at I/O
0x2e8 (irq = 11) is a 16550A
Aug 17 08:12:12 buildroot user.info kernel: parport0: PC-style at 0x278
[PCSPP(,...)]
Aug 17 08:12:12 buildroot user.info kernel: parport0: irq 0 detected
Aug 17 08:12:12 buildroot user.info kernel: brd: module loaded
Aug 17 08:12:12 buildroot user.info kernel: loop: module loaded
Aug 17 08:12:12 buildroot user.info kernel: usbcore: registered new
interface driver ub
Aug 17 08:12:12 buildroot user.info kernel: Uniform Multi-Platform E-IDE
driver
Aug 17 08:12:12 buildroot user.info kernel: piix 0000:00:0c.0: IDE
controller (0x8086:0x24db rev 0x01)
Aug 17 08:12:12 buildroot user.info kernel: piix 0000:00:0c.0: IDE port
disabled
Aug 17 08:12:12 buildroot user.info kernel: piix 0000:00:0c.0: 100%
native mode on irq 14
Aug 17 08:12:12 buildroot user.info kernel: ide0: BM-DMA at
0xed00-0xed07
Aug 17 08:12:12 buildroot user.debug kernel: Probing IDE interface ide0...
Aug 17 08:12:12 buildroot user.info kernel: hda: InnoDisk Corp. -
EDC4000 H 1GB, CFA DISK drive
Aug 17 08:12:12 buildroot user.debug kernel: hda: host max PIO4 wanted
PIO255(auto-tune) selected PIO4
Aug 17 08:12:12 buildroot user.warn kernel: hda: host side 80-wire cable
detection failed, limiting max speed to UDMA33
Aug 17 08:12:12 buildroot user.info kernel: hda: UDMA/33 mode selected
Aug 17 08:12:12 buildroot user.info kernel: ide0 at 0xef00-0xef07,0xee82
on irq 14
Aug 17 08:12:12 buildroot user.info kernel: ide_generic: please use
"probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Aug 17 08:12:12 buildroot user.debug kernel: Probing IDE interface ide1...
Aug 17 08:12:12 buildroot user.err kernel: ide1: disabled, unable to get
IRQ 14
Aug 17 08:12:12 buildroot user.info kernel: ide1: failed to initialize
IDE interface
Aug 17 08:12:12 buildroot user.info kernel: ide1: disabling port
Aug 17 08:12:12 buildroot user.debug kernel: Probing IDE interface ide1...
Aug 17 08:12:12 buildroot user.warn kernel: ------------[ cut here
]------------
Aug 17 08:12:12 buildroot user.warn kernel: WARNING: at
fs/sysfs/dir.c:455 sysfs_add_one+0x65/0x7a()
Aug 17 08:12:12 buildroot user.warn kernel: sysfs: cannot create
duplicate filename '/devices/ide1/ide_port/ide1'
Aug 17 08:12:12 buildroot user.warn kernel: Modules linked in:
Aug 17 08:12:12 buildroot user.warn kernel: Pid: 1, comm: swapper Not
tainted 3.0.4 #2
Aug 17 08:12:12 buildroot user.warn kernel: Call Trace:
Aug 17 08:12:12 buildroot user.warn kernel: [<c0117d6c>]
warn_slowpath_common+0x65/0x7a
Aug 17 08:12:12 buildroot user.warn kernel: [<c0193c33>] ?
sysfs_add_one+0x65/0x7a
Aug 17 08:12:12 buildroot user.warn kernel: [<c0117de5>]
warn_slowpath_fmt+0x26/0x2a
Aug 17 08:12:12 buildroot user.warn kernel: [<c0193c33>]
sysfs_add_one+0x65/0x7a
Aug 17 08:12:12 buildroot user.warn kernel: [<c019435c>]
create_dir+0x56/0x88
Aug 17 08:12:12 buildroot user.warn kernel: [<c019440d>]
sysfs_create_dir+0x7f/0x94
Aug 17 08:12:12 buildroot user.warn kernel: [<c01e7371>]
kobject_add_internal+0x9a/0x167
Aug 17 08:12:12 buildroot user.warn kernel: [<c01e74ef>]
kobject_add_varg+0x31/0x3d
Aug 17 08:12:12 buildroot user.warn kernel: [<c01e7565>]
kobject_add+0x43/0x49
Aug 17 08:12:12 buildroot user.warn kernel: [<c023ddd7>]
device_add+0x8f/0x470
Aug 17 08:12:12 buildroot user.warn kernel: [<c01e70ef>] ?
kobject_init+0x36/0x70
Aug 17 08:12:12 buildroot user.warn kernel: [<c023e1ca>]
device_register+0x12/0x15
Aug 17 08:12:12 buildroot user.warn kernel: [<c023e23f>]
device_create_vargs+0x72/0x99
Aug 17 08:12:12 buildroot user.warn kernel: [<c023e281>]
device_create+0x1b/0x1d
Aug 17 08:12:12 buildroot user.warn kernel: [<c024a281>]
ide_host_register+0x28b/0x4cc
Aug 17 08:12:12 buildroot user.warn kernel: [<c024a4e8>]
ide_host_add+0x26/0x4e
Aug 17 08:12:12 buildroot user.warn kernel: [<c0404746>]
ide_generic_init+0x1e6/0x227
Aug 17 08:12:12 buildroot user.warn kernel: [<c03f0174>] ?
parse_early_options+0x1c/0x1c
Aug 17 08:12:12 buildroot user.warn kernel: [<c03f0174>] ?
parse_early_options+0x1c/0x1c
Aug 17 08:12:12 buildroot user.warn kernel: [<c0101070>]
do_one_initcall+0x70/0x112
Aug 17 08:12:12 buildroot user.warn kernel: [<c0404560>] ?
sis5513_ide_init+0x16/0x16
Aug 17 08:12:12 buildroot user.warn kernel: [<c03f0174>] ?
parse_early_options+0x1c/0x1c
Aug 17 08:12:12 buildroot user.warn kernel: [<c03f01df>]
kernel_init+0x6b/0xe4
Aug 17 08:12:12 buildroot user.warn kernel: [<c030f7b6>]
kernel_thread_helper+0x6/0xd
Aug 17 08:12:12 buildroot user.warn kernel: ---[ end trace
6007971bba41140e ]---
Aug 17 08:12:12 buildroot user.err kernel: kobject_add_internal failed
for ide1 with -EEXIST, don't try to register things with the same name
in the same directory.
Aug 17 08:12:12 buildroot user.warn kernel: Pid: 1, comm: swapper
Tainted: G W 3.0.4 #2
Aug 17 08:12:12 buildroot user.warn kernel: Call Trace:
Aug 17 08:12:12 buildroot user.warn kernel: [<c01e742b>]
kobject_add_internal+0x154/0x167
Aug 17 08:12:12 buildroot user.warn kernel: [<c01e74ef>]
kobject_add_varg+0x31/0x3d
Aug 17 08:12:12 buildroot user.warn kernel: [<c01e7565>]
kobject_add+0x43/0x49
Aug 17 08:12:12 buildroot user.warn kernel: [<c023ddd7>]
device_add+0x8f/0x470
Aug 17 08:12:12 buildroot user.warn kernel: [<c01e70ef>] ?
kobject_init+0x36/0x70
Aug 17 08:12:12 buildroot user.warn kernel: [<c023e1ca>]
device_register+0x12/0x15
Aug 17 08:12:12 buildroot user.warn kernel: [<c023e23f>]
device_create_vargs+0x72/0x99
Aug 17 08:12:12 buildroot user.warn kernel: [<c023e281>]
device_create+0x1b/0x1d
Aug 17 08:12:12 buildroot user.warn kernel: [<c024a281>]
ide_host_register+0x28b/0x4cc
Aug 17 08:12:12 buildroot user.warn kernel: [<c024a4e8>]
ide_host_add+0x26/0x4e
Aug 17 08:12:12 buildroot user.warn kernel: [<c0404746>]
ide_generic_init+0x1e6/0x227
Aug 17 08:12:12 buildroot user.warn kernel: [<c03f0174>] ?
parse_early_options+0x1c/0x1c
Aug 17 08:12:12 buildroot user.warn kernel: [<c03f0174>] ?
parse_early_options+0x1c/0x1c
Aug 17 08:12:12 buildroot user.warn kernel: [<c0101070>]
do_one_initcall+0x70/0x112
Aug 17 08:12:12 buildroot user.warn kernel: [<c0404560>] ?
sis5513_ide_init+0x16/0x16
Aug 17 08:12:12 buildroot user.warn kernel: [<c03f0174>] ?
parse_early_options+0x1c/0x1c
Aug 17 08:12:12 buildroot user.warn kernel: [<c03f01df>]
kernel_init+0x6b/0xe4
Aug 17 08:12:12 buildroot user.warn kernel: [<c030f7b6>]
kernel_thread_helper+0x6/0xd
Aug 17 08:12:12 buildroot user.info kernel: ide1: disabling port
Aug 17 08:12:12 buildroot user.info kernel: ide-gd driver 1.18
Aug 17 08:12:12 buildroot user.info kernel: hda: max request size: 128KiB
Aug 17 08:12:12 buildroot user.info kernel: hda: 2047248 sectors (1048
MB) w/0KiB Cache, CHS=2031/16/63
Aug 17 08:12:12 buildroot user.info kernel: hda: cache flushes supported
Aug 17 08:12:12 buildroot user.info kernel: hda: hda1 hda2
Aug 17 08:12:12 buildroot user.info kernel: r6040: RDC R6040 NAPI net
driver,version 0.27 (23Feb2011)
Aug 17 08:12:12 buildroot user.info kernel: r6040_eth_mii: probed
Aug 17 08:12:12 buildroot user.info kernel: r6040 0000:00:08.0: attached
PHY driver [Generic PHY] (mii_bus:phy_addr=0:01)
Aug 17 08:12:12 buildroot user.info kernel: ehci_hcd: USB 2.0 'Enhanced'
Host Controller (EHCI) Driver
Aug 17 08:12:12 buildroot user.info kernel: ehci_hcd 0000:00:0b.1: EHCI
Host Controller
Aug 17 08:12:12 buildroot user.info kernel: ehci_hcd 0000:00:0b.1: new
USB bus registered, assigned bus number 1
Aug 17 08:12:12 buildroot user.info kernel: ehci_hcd 0000:00:0b.1: irq
9, io mem 0xfefafc00
Aug 17 08:12:12 buildroot user.info kernel: ehci_hcd 0000:00:0b.1: USB
2.0 started, EHCI 1.00
Aug 17 08:12:12 buildroot user.info kernel: hub 1-0:1.0: USB hub found
Aug 17 08:12:12 buildroot user.info kernel: hub 1-0:1.0: 2 ports detected
Aug 17 08:12:12 buildroot user.info kernel: ohci_hcd: USB 1.1 'Open'
Host Controller (OHCI) Driver
Aug 17 08:12:12 buildroot user.info kernel: ohci_hcd 0000:00:0b.0: OHCI
Host Controller
Aug 17 08:12:12 buildroot user.info kernel: ohci_hcd 0000:00:0b.0: new
USB bus registered, assigned bus number 2
Aug 17 08:12:12 buildroot user.info kernel: ohci_hcd 0000:00:0b.0: irq
15, io mem 0xfefae000
Aug 17 08:12:12 buildroot user.info kernel: hub 2-0:1.0: USB hub found
Aug 17 08:12:12 buildroot user.info kernel: hub 2-0:1.0: 2 ports detected
Aug 17 08:12:12 buildroot user.info kernel: Initializing USB Mass
Storage driver...
Aug 17 08:12:12 buildroot user.info kernel: usbcore: registered new
interface driver usb-storage
Aug 17 08:12:12 buildroot user.info kernel: USB Mass Storage support
registered.
Aug 17 08:12:12 buildroot user.info kernel: usbcore: registered new
interface driver libusual
Aug 17 08:12:12 buildroot user.info kernel: usbcore: registered new
interface driver ums-usbat
Aug 17 08:12:12 buildroot user.info kernel: i8042: PNP: No PS/2
controller found. Probing ports directly.
Aug 17 08:12:12 buildroot user.info kernel: serio: i8042 KBD port at
0x60,0x64 irq 1
Aug 17 08:12:12 buildroot user.info kernel: serio: i8042 AUX port at
0x60,0x64 irq 12
Aug 17 08:12:12 buildroot user.info kernel: mousedev: PS/2 mouse device
common for all mice
Aug 17 08:12:12 buildroot user.info kernel: input: PC Speaker as
/devices/platform/pcspkr/input/input0
Aug 17 08:12:12 buildroot user.info kernel: rtc_cmos rtc_cmos: rtc core:
registered rtc_cmos as rtc0
Aug 17 08:12:12 buildroot user.info kernel: rtc0: alarms up to one day,
114 bytes nvram
Aug 17 08:12:12 buildroot user.info kernel: pps_ldisc: PPS line
discipline registered
Aug 17 08:12:12 buildroot user.info kernel: usbcore: registered new
interface driver usbhid
Aug 17 08:12:12 buildroot user.info kernel: usbhid: USB HID core driver
Aug 17 08:12:12 buildroot user.info kernel: TCP cubic registered
Aug 17 08:12:12 buildroot user.info kernel: NET: Registered protocol
family 17
Aug 17 08:12:12 buildroot user.info kernel: rtc_cmos rtc_cmos: setting
system clock to 2008-08-17 08:12:12 UTC (1218960732)
Aug 17 08:12:12 buildroot user.info kernel: EXT3-fs: barriers not enabled
Aug 17 08:12:12 buildroot user.info kernel: kjournald starting. Commit
interval 5 seconds
Aug 17 08:12:12 buildroot user.info kernel: EXT3-fs (hda1): using
internal journal
Aug 17 08:12:12 buildroot user.info kernel: EXT3-fs (hda1): mounted
filesystem with ordered data mode
Aug 17 08:12:12 buildroot user.info kernel: VFS: Mounted root (ext3
filesystem) on device 3:1.
Aug 17 08:12:12 buildroot user.info kernel: Freeing unused kernel
memory: 232k freed
Aug 17 08:12:12 buildroot user.warn kernel: EXT2-fs (hda2): warning:
mounting ext3 filesystem as ext2
Aug 17 08:12:12 buildroot user.info kernel: usb 2-1: new low speed USB
device number 2 using ohci_hcd
Aug 17 08:12:12 buildroot user.info kernel: input: Microsoft Comfort
Curve Keyboard 2000 as
/devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/input/input1
Aug 17 08:12:12 buildroot user.info kernel: generic-usb
0003:045E:00DD.0001: input: USB HID v1.11 Keyboard [Microsoft Comfort
Curve Keyboard 2000] on usb-0000:00:0b.0-1/input0
Aug 17 08:12:13 buildroot user.info kernel: input: Microsoft Comfort
Curve Keyboard 2000 as
/devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.1/input/input2
Aug 17 08:12:13 buildroot user.info kernel: generic-usb
0003:045E:00DD.0002: input: USB HID v1.11 Device [Microsoft Comfort
Curve Keyboard 2000] on usb-0000:00:0b.0-1/input1
Aug 17 08:12:13 buildroot authpriv.info dropbear[983]: Running in background
Aug 17 08:12:13 buildroot daemon.info linuxrc: starting pid 988, tty
'/dev/null': '/bin/touch /var/log/messages'
Aug 17 08:12:13 buildroot daemon.info linuxrc: starting pid 989, tty
'/dev/tty1': '/sbin/getty 38400 tty1'
Aug 17 08:12:13 buildroot daemon.info linuxrc: starting pid 990, tty
'/dev/tty2': '/sbin/getty 38400 tty2'
Aug 17 08:12:13 buildroot daemon.info linuxrc: starting pid 993, tty
'/dev/ttyS0': '/sbin/getty -L ttyS0 115200 vt100 '
Aug 17 08:12:13 buildroot user.debug kernel: spurious 8259A interrupt: IRQ7.
Aug 17 08:12:13 buildroot daemon.info linuxrc: starting pid 994, tty
'/dev/null': '/sbin/syslogd -n -m 0'
Aug 17 08:12:13 buildroot syslog.info syslogd started: BusyBox v1.18.5
Aug 17 08:12:13 buildroot daemon.info linuxrc: starting pid 995, tty
'/dev/null': '/sbin/klogd -n'
Aug 17 08:12:13 buildroot user.notice kernel: klogd started: BusyBox
v1.18.5 (2011-09-08 16:26:33 EDT)
Aug 17 08:12:13 buildroot daemon.info linuxrc: starting pid 996, tty
'/dev/tty3': '/usr/bin/tail -f /var/log/messages'
Aug 17 08:12:13 buildroot daemon.info linuxrc: starting pid 999, tty
'/dev/null': '/usr/sa/sa_watch_process.sh'
Aug 17 08:12:13 buildroot daemon.notice ntpd[987]: ntpd 4.2.6p3 at 1.2290
Thu Sep 8 20:28:44 UTC 2011 (1)
Aug 17 08:12:13 buildroot daemon.debug ntpd[987]: set_process_priority:
Leave priority alone: priority_done is <2>
Aug 17 08:12:13 buildroot daemon.notice ntpd[987]: proto: precision =
2.053 usec
Aug 17 08:12:13 buildroot daemon.debug ntpd[987]: ntp_io: estimated max
descriptors: 1024, initial socket boundary: 16
Aug 17 08:12:13 buildroot daemon.info ntpd[987]: Listen and drop on 0
v4wildcard 0.0.0.0 UDP 123
Aug 17 08:12:13 buildroot daemon.info ntpd[987]: Listen normally on 1 lo
127.0.0.1 UDP 123
Aug 17 08:12:13 buildroot daemon.info ntpd[987]: Listen normally on 2
eth0 192.168.2.23 UDP 123
Aug 17 08:12:13 buildroot daemon.info ntpd[987]: peers refreshed
Aug 17 08:12:13 buildroot daemon.err ntpd[987]: refclock_open /dev/gps0:
No such file or directory
Aug 17 08:12:13 buildroot daemon.info ntpd[987]: 127.127.20.0 interface
127.0.0.1 -> (none)
Aug 17 08:15:43 buildroot auth.info login[989]: root login on 'tty1'
Aug 17 08:15:53 buildroot auth.info passwd: Password for root changed by
root
On 2011-09-09 02:28, Yegor Yefremov wrote:
> Hi Marc,
>
> Am 08.09.2011 23:55, schrieb Marc Leclerc:
>> Hi just moved from 2010-11 to 2011-08 with kernel 3.0.2 and the boot stops at the message in the subject. my fstab remains the same as much of the settings. anyone has a clue where i should start looking?
> Please provide the full bootlog.
>
> Yegor
>
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread