[Buildroot] [PATCH] New package: gpio9260

[Buildroot] [PATCH] New package: gpio9260

[J.C. Woltz]

From: "J.C. Woltz" <jwoltz@gmail.com>

gpio9260 is an utility used to read and set gpio states on
the at91sam9260 and at91sam9g20 CPUs

Signed-off-by: J.C. Woltz <jwoltz@gmail.com>
---
 package/Config.in            |    1 +
 package/gpio9260/Config.in   |    5 +++++
 package/gpio9260/gpio9260.mk |   23 +++++++++++++++++++++++
 3 files changed, 29 insertions(+), 0 deletions(-)
 create mode 100644 package/gpio9260/Config.in
 create mode 100644 package/gpio9260/gpio9260.mk

diff --git a/package/Config.in b/package/Config.in
index 66ee266..c083bfc 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -177,6 +177,7 @@ source "package/gadgetfs-test/Config.in"
 source "package/gdisk/Config.in"
 source "package/genext2fs/Config.in"
 source "package/genromfs/Config.in"
+source "package/gpio9260/Config.in"
 source "package/gpsd/Config.in"
 source "package/gvfs/Config.in"
 if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
diff --git a/package/gpio9260/Config.in b/package/gpio9260/Config.in
new file mode 100644
index 0000000..088b11e
--- /dev/null
+++ b/package/gpio9260/Config.in
@@ -0,0 +1,5 @@
+config BR2_PACKAGE_GPIO9260
+	bool "gpio9260"
+	help
+		gpio9260 is a program to interact with at91sam9260
+		and at91sam9g20 GPIOs. 
diff --git a/package/gpio9260/gpio9260.mk b/package/gpio9260/gpio9260.mk
new file mode 100644
index 0000000..b9adb41
--- /dev/null
+++ b/package/gpio9260/gpio9260.mk
@@ -0,0 +1,23 @@
+#############################################################
+#
+# gpio9260
+#
+#############################################################
+GPIO9260_VERSION = 1.0
+GPIO9260_SOURCE = gpio9260-$(GPIO9260_VERSION).tar.gz
+GPIO9260_SITE = https://www.jcwoltz.com/e10
+GPIO9260_INSTALL_STAGING = YES
+
+define GPIO9260_BUILD_CMDS
+	$(MAKE) CC=$(TARGET_CC) LD=$(TARGET_LD) -C $(@D) all
+endef
+
+define GPIO9260_INSTALL_STAGING_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/gpio9260 $(STAGING_DIR)/usr/bin
+endef
+
+define GPIO9260_INSTALL_TARGET_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/gpio9260 $(TARGET_DIR)/usr/bin
+endef
+
+$(eval $(call GENTARGETS,package,gpio9260))
-- 
1.7.5.4

[Buildroot] [PATCH] New package: gpio9260

[Peter Korsgaard]

>>>>> "J" == J C Woltz <jwoltz@gmail.com> writes:

 J> From: "J.C. Woltz" <jwoltz@gmail.com>
 J> gpio9260 is an utility used to read and set gpio states on
 J> the at91sam9260 and at91sam9g20 CPUs

What's the advantage of using this compared to normal /sys/class/gpio
sysfs access?

 J> index 0000000..b9adb41
 J> --- /dev/null
 J> +++ b/package/gpio9260/gpio9260.mk
 J> @@ -0,0 +1,23 @@
 J> +#############################################################
 J> +#
 J> +# gpio9260
 J> +#
 J> +#############################################################
 J> +GPIO9260_VERSION = 1.0
 J> +GPIO9260_SOURCE = gpio9260-$(GPIO9260_VERSION).tar.gz
 J> +GPIO9260_SITE = https://www.jcwoltz.com/e10
 J> +GPIO9260_INSTALL_STAGING = YES

It's just a program (no headers/libraries), so why install into staging?

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH] New package: gpio9260

[J.C. Woltz]

  J> From: "J.C. Woltz" <jwoltz@gmail.com>
>  J> gpio9260 is an utility used to read and set gpio states on
>  J> the at91sam9260 and at91sam9g20 CPUs
>
> What's the advantage of using this compared to normal /sys/class/gpio
> sysfs access?
>
> I did not write this program. Its header states:
/*
 * (C) Copyright 2004  Roman Avramenko <roman@imsystems.ru>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */


Calao and Synapse Wireless ship the gpio9260 to allow script and users easy
access to (primarily) push buttons. It is used like:
/usr/bin/gpio9260 ?PB10
Then the return code lets you know the state of the input. Or it can be
used to set outputs, but in that case the /sys/class/led or other makes
sense.


> It's just a program (no headers/libraries), so why install into staging?
>
>
That is my mistake. I will fix that.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120206/37bae65c/attachment.html>

[Buildroot] [PATCH] New package: gpio9260

[Jean-Christophe PLAGNIOL-VILLARD]

On 16:43 Mon 06 Feb     , J.C. Woltz wrote:
>        J> From: "J.C. Woltz" <jwoltz@gmail.com>
>       J> gpio9260 is an utility used to read and set gpio states on
>       J> the at91sam9260 and at91sam9g20 CPUs
> 
>      What's the advantage of using this compared to normal /sys/class/gpio
>      sysfs access?
> 
>    I did not write this program. Its header states:
>    /*
>     * (C) Copyright 2004  Roman Avramenko <roman@imsystems.ru>
>     *
>     * This program is free software; you can redistribute it and/or
>     * modify it under the terms of the GNU General Public License as
>     * published by the Free Software Foundation; either version 2 of
>     * the License, or (at your option) any later version.
>     *
>     * This program is distributed in the hope that it will be useful,
>     * but WITHOUT ANY WARRANTY; without even the implied warranty of
>     * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>     * GNU General Public License for more details.
>     *
>     * You should have received a copy of the GNU General Public License
>     * along with this program; if not, write to the Free Software
>     * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>     * MA 02111-1307 USA
>     */
> 
>    Calao and Synapse Wireless ship the gpio9260 to allow script and users
>    easy access to (primarily) push buttons. It is used like:
>    /usr/bin/gpio9260 ?PB10
>    Then the return code lets you know the state of the input. Or it can be
>    used to set outputs, but in that case the /sys/class/led or other makes
>    sense.
>     
> 
>      It's just a program (no headers/libraries), so why install into staging?
> 
>    That is my mistake. I will fix that.
For Calao platfrom this is depricated

Best Regards,
J.

[Buildroot] [PATCH] New package: gpio9260

[Jean-Christophe PLAGNIOL-VILLARD]

On 15:13 Mon 06 Feb     , J.C. Woltz wrote:
> From: "J.C. Woltz" <jwoltz@gmail.com>
> 
> gpio9260 is an utility used to read and set gpio states on
> the at91sam9260 and at91sam9g20 CPUs
why dont u use the kernel instead via sysfs

If this need kernel modification I don't think it will go mainline

Best Regards,
J.
> 
> Signed-off-by: J.C. Woltz <jwoltz@gmail.com>
> ---
>  package/Config.in            |    1 +
>  package/gpio9260/Config.in   |    5 +++++
>  package/gpio9260/gpio9260.mk |   23 +++++++++++++++++++++++
>  3 files changed, 29 insertions(+), 0 deletions(-)
>  create mode 100644 package/gpio9260/Config.in
>  create mode 100644 package/gpio9260/gpio9260.mk
> 
> diff --git a/package/Config.in b/package/Config.in
> index 66ee266..c083bfc 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -177,6 +177,7 @@ source "package/gadgetfs-test/Config.in"
>  source "package/gdisk/Config.in"
>  source "package/genext2fs/Config.in"
>  source "package/genromfs/Config.in"
> +source "package/gpio9260/Config.in"
>  source "package/gpsd/Config.in"
>  source "package/gvfs/Config.in"
>  if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
> diff --git a/package/gpio9260/Config.in b/package/gpio9260/Config.in
> new file mode 100644
> index 0000000..088b11e
> --- /dev/null
> +++ b/package/gpio9260/Config.in
> @@ -0,0 +1,5 @@
> +config BR2_PACKAGE_GPIO9260
> +	bool "gpio9260"
> +	help
> +		gpio9260 is a program to interact with at91sam9260
> +		and at91sam9g20 GPIOs. 
> diff --git a/package/gpio9260/gpio9260.mk b/package/gpio9260/gpio9260.mk
> new file mode 100644
> index 0000000..b9adb41
> --- /dev/null
> +++ b/package/gpio9260/gpio9260.mk
> @@ -0,0 +1,23 @@
> +#############################################################
> +#
> +# gpio9260
> +#
> +#############################################################
> +GPIO9260_VERSION = 1.0
> +GPIO9260_SOURCE = gpio9260-$(GPIO9260_VERSION).tar.gz
> +GPIO9260_SITE = https://www.jcwoltz.com/e10
> +GPIO9260_INSTALL_STAGING = YES
> +
> +define GPIO9260_BUILD_CMDS
> +	$(MAKE) CC=$(TARGET_CC) LD=$(TARGET_LD) -C $(@D) all
> +endef
> +
> +define GPIO9260_INSTALL_STAGING_CMDS
> +	$(INSTALL) -D -m 0755 $(@D)/gpio9260 $(STAGING_DIR)/usr/bin
> +endef
> +
> +define GPIO9260_INSTALL_TARGET_CMDS
> +	$(INSTALL) -D -m 0755 $(@D)/gpio9260 $(TARGET_DIR)/usr/bin
> +endef
> +
> +$(eval $(call GENTARGETS,package,gpio9260))
> -- 
> 1.7.5.4
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

[Buildroot] [PATCH] New package: gpio9260

[Peter Korsgaard]

>>>>> "Jean-Christophe" == Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> writes:

 Jean-Christophe> On 15:13 Mon 06 Feb     , J.C. Woltz wrote:
 >> From: "J.C. Woltz" <jwoltz@gmail.com>
 >> 
 >> gpio9260 is an utility used to read and set gpio states on
 >> the at91sam9260 and at91sam9g20 CPUs
 Jean-Christophe> why dont u use the kernel instead via sysfs

My comment as well.

 Jean-Christophe> If this need kernel modification I don't think it will
 go mainline

It's just a glorified devmem2 (E.G. using /dev/mem). It turns out it's
from 2004, so from before gpiolib got added to the kernel.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH] New package: gpio9260

[Jean-Christophe PLAGNIOL-VILLARD]

On 10:34 Wed 08 Feb     , Peter Korsgaard wrote:
> >>>>> "Jean-Christophe" == Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> writes:
> 
>  Jean-Christophe> On 15:13 Mon 06 Feb     , J.C. Woltz wrote:
>  >> From: "J.C. Woltz" <jwoltz@gmail.com>
>  >> 
>  >> gpio9260 is an utility used to read and set gpio states on
>  >> the at91sam9260 and at91sam9g20 CPUs
>  Jean-Christophe> why dont u use the kernel instead via sysfs
> 
> My comment as well.
> 
>  Jean-Christophe> If this need kernel modification I don't think it will
>  go mainline
> 
> It's just a glorified devmem2 (E.G. using /dev/mem). It turns out it's
> from 2004, so from before gpiolib got added to the kernel.
I read the source code of this package

it's a dangerous one, as it's play with the same register as done by the
gpiolib.

So NACK

Best Regards,
J.

[Buildroot] [PATCH] New package: gpio9260

[Peter Korsgaard]

>>>>> "J" == J C Woltz <jwoltz@gmail.com> writes:

Hi,

 J> I cannot answer what the advantage is. This is just a first patch of
 J> many to support full functionality of the Synapse Wireless E10. They
 J> and calao use gpio9260 for simple user access from shell script.
 J> Primarily for reading push buttons.

So you are not the author of the software? Where did you get it from?

 J> I don't care if this is accepted. It would be nice, but not needed. 

 J> I have patches for the following:
 J> -updated usb_modswitch
 J> -add usb_modeswitch_data package

 J> -board support for the E10 including linux patch, u-boot patch, and
 J> linux config, and buildroot e10_defconfig

What is this e10? Is the Linux/U-boot patches submitted upstream?

 J> Since I am new to submitting patches to buildroot, I would
 J> appreciate any advice/etiquette you have for me to submit the
 J> patches.

My first advice is that you should keep discussion on the mailing list,
don't just mail me directly, thanks.

-- 
Bye, Peter Korsgaard