* [Buildroot] u-boot .img rootfs
2012-03-06 10:48 ` Thomas Petazzoni
@ 2012-03-06 16:48 ` H Hartley Sweeten
2012-03-06 16:59 ` Thomas Petazzoni
0 siblings, 1 reply; 4+ messages in thread
From: H Hartley Sweeten @ 2012-03-06 16:48 UTC (permalink / raw)
To: buildroot
On Tuesday, March 06, 2012 3:48 AM, Thomas Petazzoni wrote:
> Le Mon, 5 Mar 2012 20:00:57 -0600, H Hartley Sweeten <hartleys@visionengravers.com> a ?crit :
>
>> I have been using Buildroot to create a rootfs.ext2.gz that works
>> great with RedBoot.
>>
>> I have a new board that uses U-Boot as the bootloader and it wants
>> some kind of .img file for the rootfs. Can this be created using
>> Buildroot? Do I need to do something after the rootfs.ext2.gz is
>> created to make the .img file?
>
> Do you have more details, because .img is very generic. Do you have a
> pointer to your specific U-Boot configuration? Can you just show why
> you think U-Boot needs such as file?
This is the first U-Boot system I have worked with so I don't have a lot
of details.
I know that that this works:
SIM.ONE> tftp c0200000 uImage
TFTP from server 192.168.0.84; our IP address is 192.168.0.79
Filename 'uImage'.
Load address: 0xc0200000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
###################################################
done
Bytes transferred = 1923792 (1d5ad0 hex)
SIM.ONE> iminfo
## Checking Image at c0200000 ...
Image Name: Linux-3.2.5
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1923728 Bytes = 1.8 MB
Load Address: c0008000
Entry Point: c0008000
Verifying Checksum ... OK
But, when I try the ramdisk.gz file (rootfs.ext2.gz) I get this:
SIM.ONE> tftp c8000000 ramdisk.gz
TFTP from server 192.168.0.84; our IP address is 192.168.0.79
Filename 'ramdisk.gz'.
Load address: 0xc8000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#####################################################
done
Bytes transferred = 2266236 (22947c hex)
SIM.ONE> iminfo
## Checking Image at c8000000 ...
Bad Magic Number
The only things I have found about the U-Boot image file mentions using 'mkimage' to create
the file using a command like these examples:
mkimage -T ramdisk -C gzip -n 'Test Ramdisk Image' -d ramdisk.img.gz uRamdisk
mkimage -A sh -O linux -T ramdisk -a 0x8C800000 -n "ST40 Linux ramdisk" -d initrd.img /export/ramdisk.ub
My guess the uRamdisk file is the same format as the uImage file used for the kernel. But,
I'm not sure what the format of the ramdisk.img.gz or initrd.img files are.
I do see there is a uboot-mkimage package available in Debian. It says this about it:
---
This package contains the mkimage utility, which encapsulates a compressed "uImage"
Linux kerel image with header information, CRC32 checksum, etc, for use with the
U-Boot bootloader.
mkimage can also be used to create ramdisk images for use with U-Boot, either separated
from the Linux kernel image, or combined into one file. mkimage encapsulates the images
with a 64 byte header containing information about target architecture, operating system,
image type, compression method, entry points, time stamp, CRC32 checksums, etc.
---
Regards,
Hartley
^ permalink raw reply [flat|nested] 4+ messages in thread