* [Buildroot] [PATCH] toolchain-crosstool-ng: update PPL and CLoog versions in default configs
@ 2012-12-19 23:29 Thomas Petazzoni
2012-12-20 19:56 ` Yann E. MORIN
2012-12-21 8:16 ` Peter Korsgaard
0 siblings, 2 replies; 5+ messages in thread
From: Thomas Petazzoni @ 2012-12-19 23:29 UTC (permalink / raw)
To: buildroot
We have updated our Crosstool-NG configuration to gcc 4.6.x, but the
PPL and CLoog versions were not updated accordingly. With gcc 4.6.x,
at least PPL 0.11 is needed, and only CLoog > 0.15.9 can work with PLL
0.11.
Fixes:
http://autobuild.buildroot.org/results/c22758a30c3b8abb582150cefd7099605c527e14/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
.../crosstool-ng.config-eglibc | 16 ++++++++++------
.../crosstool-ng.config-glibc | 16 ++++++++++------
.../crosstool-ng.config-uClibc | 16 ++++++++++------
3 files changed, 30 insertions(+), 18 deletions(-)
diff --git a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc
index 11eb602..08f036c 100644
--- a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc
+++ b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc
@@ -474,18 +474,22 @@ CT_MPFR_V_2_4_2=y
# CT_MPFR_V_2_4_1 is not set
# CT_MPFR_V_2_4_0 is not set
CT_MPFR_VERSION="2.4.2"
-# CT_PPL_V_0_11_2 is not set
+CT_PPL_V_0_11_2=y
# CT_PPL_V_0_11_1 is not set
# CT_PPL_V_0_11 is not set
-CT_PPL_V_0_10_2=y
-CT_PPL_VERSION="0.10.2"
-# CT_CLOOG_V_0_15_11 is not set
+# CT_PPL_V_0_10_2 is not set
+CT_PPL_VERSION="0.11.2"
+CT_PPL_0_11=y
+CT_PPL_NEEDS_LIBPWL=y
+CT_CLOOG_V_0_15_11=y
# CT_CLOOG_V_0_15_10 is not set
-CT_CLOOG_V_0_15_9=y
+# CT_CLOOG_V_0_15_9 is not set
# CT_CLOOG_V_0_15_8 is not set
# CT_CLOOG_V_0_15_7 is not set
# CT_CLOOG_V_0_15_6 is not set
-CT_CLOOG_VERSION="0.15.9"
+CT_CLOOG_VERSION="0.15.11"
+CT_CLOOG_0_15_1x=y
+CT_CLOOG_NEEDS_AUTORECONF=y
CT_MPC_V_0_9=y
# CT_MPC_V_0_8_2 is not set
# CT_MPC_V_0_8_1 is not set
diff --git a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc
index c30a115..ae0bc02 100644
--- a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc
+++ b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc
@@ -463,18 +463,22 @@ CT_MPFR_V_2_4_2=y
# CT_MPFR_V_2_4_1 is not set
# CT_MPFR_V_2_4_0 is not set
CT_MPFR_VERSION="2.4.2"
-# CT_PPL_V_0_11_2 is not set
+CT_PPL_V_0_11_2=y
# CT_PPL_V_0_11_1 is not set
# CT_PPL_V_0_11 is not set
-CT_PPL_V_0_10_2=y
-CT_PPL_VERSION="0.10.2"
-# CT_CLOOG_V_0_15_11 is not set
+# CT_PPL_V_0_10_2 is not set
+CT_PPL_VERSION="0.11.2"
+CT_PPL_0_11=y
+CT_PPL_NEEDS_LIBPWL=y
+CT_CLOOG_V_0_15_11=y
# CT_CLOOG_V_0_15_10 is not set
-CT_CLOOG_V_0_15_9=y
+# CT_CLOOG_V_0_15_9 is not set
# CT_CLOOG_V_0_15_8 is not set
# CT_CLOOG_V_0_15_7 is not set
# CT_CLOOG_V_0_15_6 is not set
-CT_CLOOG_VERSION="0.15.9"
+CT_CLOOG_VERSION="0.15.11"
+CT_CLOOG_0_15_1x=y
+CT_CLOOG_NEEDS_AUTORECONF=y
CT_MPC_V_0_9=y
# CT_MPC_V_0_8_2 is not set
# CT_MPC_V_0_8_1 is not set
diff --git a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc
index e93128b..4f21263 100644
--- a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc
+++ b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc
@@ -445,18 +445,22 @@ CT_MPFR_V_2_4_2=y
# CT_MPFR_V_2_4_1 is not set
# CT_MPFR_V_2_4_0 is not set
CT_MPFR_VERSION="2.4.2"
-# CT_PPL_V_0_11_2 is not set
+CT_PPL_V_0_11_2=y
# CT_PPL_V_0_11_1 is not set
# CT_PPL_V_0_11 is not set
-CT_PPL_V_0_10_2=y
-CT_PPL_VERSION="0.10.2"
-# CT_CLOOG_V_0_15_11 is not set
+# CT_PPL_V_0_10_2 is not set
+CT_PPL_VERSION="0.11.2"
+CT_PPL_0_11=y
+CT_PPL_NEEDS_LIBPWL=y
+CT_CLOOG_V_0_15_11=y
# CT_CLOOG_V_0_15_10 is not set
-CT_CLOOG_V_0_15_9=y
+# CT_CLOOG_V_0_15_9 is not set
# CT_CLOOG_V_0_15_8 is not set
# CT_CLOOG_V_0_15_7 is not set
# CT_CLOOG_V_0_15_6 is not set
-CT_CLOOG_VERSION="0.15.9"
+CT_CLOOG_VERSION="0.15.11"
+CT_CLOOG_0_15_1x=y
+CT_CLOOG_NEEDS_AUTORECONF=y
CT_MPC_V_0_9=y
# CT_MPC_V_0_8_2 is not set
# CT_MPC_V_0_8_1 is not set
--
1.7.9.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] toolchain-crosstool-ng: update PPL and CLoog versions in default configs
2012-12-19 23:29 [Buildroot] [PATCH] toolchain-crosstool-ng: update PPL and CLoog versions in default configs Thomas Petazzoni
@ 2012-12-20 19:56 ` Yann E. MORIN
2012-12-20 20:11 ` Yann E. MORIN
2012-12-21 8:16 ` Peter Korsgaard
1 sibling, 1 reply; 5+ messages in thread
From: Yann E. MORIN @ 2012-12-20 19:56 UTC (permalink / raw)
To: buildroot
Thomas, All,
On Thursday 20 December 2012 Thomas Petazzoni wrote:
> We have updated our Crosstool-NG configuration to gcc 4.6.x, but the
> PPL and CLoog versions were not updated accordingly. With gcc 4.6.x,
> at least PPL 0.11 is needed, and only CLoog > 0.15.9 can work with PLL
> 0.11.
>
> Fixes:
>
> http://autobuild.buildroot.org/results/c22758a30c3b8abb582150cefd7099605c527e14/build-end.log
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The eglibc build is broken for a defconfig:
/tmpfs/ccvkz3ro.s:33: Error: CFI instruction used without
previous .cfi_startproc
But that's another issue.
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] toolchain-crosstool-ng: update PPL and CLoog versions in default configs
2012-12-20 19:56 ` Yann E. MORIN
@ 2012-12-20 20:11 ` Yann E. MORIN
2012-12-20 22:07 ` Thomas Petazzoni
0 siblings, 1 reply; 5+ messages in thread
From: Yann E. MORIN @ 2012-12-20 20:11 UTC (permalink / raw)
To: buildroot
Thomas, All,
On Thursday 20 December 2012 Yann E. MORIN wrote:
> On Thursday 20 December 2012 Thomas Petazzoni wrote:
> > We have updated our Crosstool-NG configuration to gcc 4.6.x, but the
> > PPL and CLoog versions were not updated accordingly. With gcc 4.6.x,
> > at least PPL 0.11 is needed, and only CLoog > 0.15.9 can work with PLL
> > 0.11.
> >
> > Fixes:
> >
> > http://autobuild.buildroot.org/results/c22758a30c3b8abb582150cefd7099605c527e14/build-end.log
> >
> > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>
> The eglibc build is broken for a defconfig:
> /tmpfs/ccvkz3ro.s:33: Error: CFI instruction used without
> previous .cfi_startproc
> But that's another issue.
Well, my bad, it's the glibc build that is broken.
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] toolchain-crosstool-ng: update PPL and CLoog versions in default configs
2012-12-20 20:11 ` Yann E. MORIN
@ 2012-12-20 22:07 ` Thomas Petazzoni
0 siblings, 0 replies; 5+ messages in thread
From: Thomas Petazzoni @ 2012-12-20 22:07 UTC (permalink / raw)
To: buildroot
Dear Yann E. MORIN,
On Thu, 20 Dec 2012 21:11:57 +0100, Yann E. MORIN wrote:
> > The eglibc build is broken for a defconfig:
> > /tmpfs/ccvkz3ro.s:33: Error: CFI instruction used without
> > previous .cfi_startproc
> > But that's another issue.
>
> Well, my bad, it's the glibc build that is broken.
I admit I had tested an eglibc build and an uClibc build, but I thought
it was ok to validate the PPL+CLoog thing, which is independent from
the C library problem.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] toolchain-crosstool-ng: update PPL and CLoog versions in default configs
2012-12-19 23:29 [Buildroot] [PATCH] toolchain-crosstool-ng: update PPL and CLoog versions in default configs Thomas Petazzoni
2012-12-20 19:56 ` Yann E. MORIN
@ 2012-12-21 8:16 ` Peter Korsgaard
1 sibling, 0 replies; 5+ messages in thread
From: Peter Korsgaard @ 2012-12-21 8:16 UTC (permalink / raw)
To: buildroot
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Thomas> We have updated our Crosstool-NG configuration to gcc 4.6.x, but the
Thomas> PPL and CLoog versions were not updated accordingly. With gcc 4.6.x,
Thomas> at least PPL 0.11 is needed, and only CLoog > 0.15.9 can work with PLL
Thomas> 0.11.
Thomas> Fixes:
Thomas> http://autobuild.buildroot.org/results/c22758a30c3b8abb582150cefd7099605c527e14/build-end.log
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-12-21 8:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-19 23:29 [Buildroot] [PATCH] toolchain-crosstool-ng: update PPL and CLoog versions in default configs Thomas Petazzoni
2012-12-20 19:56 ` Yann E. MORIN
2012-12-20 20:11 ` Yann E. MORIN
2012-12-20 22:07 ` Thomas Petazzoni
2012-12-21 8:16 ` Peter Korsgaard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox