[Buildroot] [pull request] Pull request for branch rpi-support

[Buildroot] [pull request] Pull request for branch rpi-support

[Maxime Hadjinlian]

Hello All!

A short series to add some needed RaspberryPi specific packages in order to
build a rootfs for this board.

The following changes since commit 66bfe1d4fe2de50aef6ac3fc836a710fa577cdef:

  xdriver_xf86-video-sunffb: remove package (2013-01-05 14:34:48 +0100)

are available in the git repository at:

  http://github.com/maximeh/buildroot.git rpi-support

for you to fetch changes up to 0a82214a34f519691ff795260820907a7a8b4cfc:

  rpi-fw: New package (2013-01-05 14:59:15 +0100)

----------------------------------------------------------------
Maxime Hadjinlian (3):
      libcofi: new package
      rpi-userland: new package
      rpi-fw: New package

 package/Config.in                    |    3 +++
 package/libcofi/Config.in            |    8 ++++++++
 package/libcofi/libcofi.mk           |   17 +++++++++++++++++
 package/rpi-fw/Config.in             |    9 +++++++++
 package/rpi-fw/cmdline.txt           |    1 +
 package/rpi-fw/config.txt            |    7 +++++++
 package/rpi-fw/rpi-fw.mk             |   22 ++++++++++++++++++++++
 package/rpi-userland/Config.in       |   12 ++++++++++++
 package/rpi-userland/rpi-userland.mk |   25 +++++++++++++++++++++++++
 9 files changed, 104 insertions(+)
 create mode 100644 package/libcofi/Config.in
 create mode 100644 package/libcofi/libcofi.mk
 create mode 100644 package/rpi-fw/Config.in
 create mode 100644 package/rpi-fw/cmdline.txt
 create mode 100644 package/rpi-fw/config.txt
 create mode 100644 package/rpi-fw/rpi-fw.mk
 create mode 100644 package/rpi-userland/Config.in
 create mode 100644 package/rpi-userland/rpi-userland.mk

Regards,
Maxime Hadjinlian

--

[Buildroot] [PATCH 1/3] libcofi: new package

[Maxime Hadjinlian]

replacement for memcpy and memset functionality
This package was originally found at : https://github.com/huceke/buildroot-rbp
By gimli <ebsi4711@gmail.com>

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
---
 package/Config.in          |    1 +
 package/libcofi/Config.in  |    8 ++++++++
 package/libcofi/libcofi.mk |   17 +++++++++++++++++
 3 files changed, 26 insertions(+)
 create mode 100644 package/libcofi/Config.in
 create mode 100644 package/libcofi/libcofi.mk

diff --git a/package/Config.in b/package/Config.in
index 11ff82d..a3530d7 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -511,6 +511,7 @@ endmenu
 menu "Other"
 source "package/apr/Config.in"
 source "package/apr-util/Config.in"
+source "package/libcofi/Config.in"
 source "package/classpath/Config.in"
 source "package/fftw/Config.in"
 source "package/libargtable2/Config.in"
diff --git a/package/libcofi/Config.in b/package/libcofi/Config.in
new file mode 100644
index 0000000..b900b69
--- /dev/null
+++ b/package/libcofi/Config.in
@@ -0,0 +1,8 @@
+config BR2_PACKAGE_LIBCOFI
+	bool "libcofi"
+	depends on BR2_arm
+	help
+	  A replacement for memcpy and memset functionality for the Raspberry Pi
+	  with the intention of gaining greater performance.
+
+	  https://github.com/simonjhall/copies-and-fills
diff --git a/package/libcofi/libcofi.mk b/package/libcofi/libcofi.mk
new file mode 100644
index 0000000..4872d1c
--- /dev/null
+++ b/package/libcofi/libcofi.mk
@@ -0,0 +1,17 @@
+#############################################################
+#
+# libcofi
+#
+#############################################################
+LIBCOFI_VERSION = 7313fbe12b0593034d0a1b606bf33c7cf4ababce
+LIBCOFI_SITE = http://github.com/simonjhall/copies-and-fills/tarball/master
+
+define LIBCOFI_BUILD_CMDS
+    $(MAKE1) AS="$(TARGET_AS)" CC="$(TARGET_CC)" -C $(@D) libcofi_rpi.so
+endef
+
+define LIBCOFI_INSTALL_TARGET_CMDS
+    $(INSTALL) -D -m 0755 $(@D)/libcofi_rpi.so* $(TARGET_DIR)/usr/lib
+endef
+
+$(eval $(generic-package))
-- 
1.7.10.4

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Maxime Hadjinlian]

Introducing a package to build the userland part of the Raspberry,
needed by anyone who would want to build a rootfs for a RaspberryPi.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
---
 package/Config.in                    |    1 +
 package/rpi-userland/Config.in       |   12 ++++++++++++
 package/rpi-userland/rpi-userland.mk |   25 +++++++++++++++++++++++++
 3 files changed, 38 insertions(+)
 create mode 100644 package/rpi-userland/Config.in
 create mode 100644 package/rpi-userland/rpi-userland.mk

diff --git a/package/Config.in b/package/Config.in
index a3530d7..604ed1b 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -579,6 +579,7 @@ source "package/collectd/Config.in"
 source "package/empty/Config.in"
 source "package/googlefontdirectory/Config.in"
 source "package/mobile-broadband-provider-info/Config.in"
+source "package/rpi-userland/Config.in"
 source "package/shared-mime-info/Config.in"
 source "package/snowball-init/Config.in"
 source "package/sound-theme-borealis/Config.in"
diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
new file mode 100644
index 0000000..3d4585f
--- /dev/null
+++ b/package/rpi-userland/Config.in
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_RPI_USERLAND
+	bool "rpi-userland"
+	select BR2_PACKAGE_LIBCOFI
+	help
+	  Raspberry Pi Userland contains the necessary library to use the
+	  VideoCore driver.
+
+	  Includes source for the ARM side code to interface to: 
+	  EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
+
+	  https://github.com/raspberrypi/userland/
+
diff --git a/package/rpi-userland/rpi-userland.mk b/package/rpi-userland/rpi-userland.mk
new file mode 100644
index 0000000..5bae06d
--- /dev/null
+++ b/package/rpi-userland/rpi-userland.mk
@@ -0,0 +1,25 @@
+#############################################################
+#
+# rpi-userland
+#
+#############################################################
+RPI_USERLAND_VERSION = 9852ce28826889e50c4d6786b942f51bccccac54
+RPI_USERLAND_SITE = http://github.com/raspberrypi/userland/tarball/master
+RPI_USERLAND_LICENSE = FOSS
+RPI_USERLAND_LICENSE_FILE = LICENCE
+RPI_USERLAND_INSTALL_STAGING = YES
+
+define RPI_USERLAND_POST_TARGET_CLEANUP
+    rm -Rf $(TARGET_DIR)/opt/vc/include
+    rm -Rf $(TARGET_DIR)/opt/vc/share
+    rm -Rf $(TARGET_DIR)/opt/vc/src
+    rm -f  $(TARGET_DIR)/etc/init.d/vcfiled
+    rm -f  $(TARGET_DIR)/opt/vc/lib/*.a
+    rmdir -p --ignore-fail-on-non-empty $(TARGET_DIR)/etc/init.d || true
+    mv $(TARGET_DIR)/opt/vc/lib/* $(TARGET_DIR)/usr/lib/
+    rm -Rf $(TARGET_DIR)/opt/vc/
+endef
+
+RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP
+
+$(eval $(cmake-package))
-- 
1.7.10.4

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Maxime Hadjinlian]

Introducing a package to install pre-built binaries for the bootloader and the
GPU firmware for the RaspberryPi board.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
---
 package/Config.in          |    1 +
 package/rpi-fw/Config.in   |    9 +++++++++
 package/rpi-fw/cmdline.txt |    1 +
 package/rpi-fw/config.txt  |    7 +++++++
 package/rpi-fw/rpi-fw.mk   |   22 ++++++++++++++++++++++
 5 files changed, 40 insertions(+)
 create mode 100644 package/rpi-fw/Config.in
 create mode 100644 package/rpi-fw/cmdline.txt
 create mode 100644 package/rpi-fw/config.txt
 create mode 100644 package/rpi-fw/rpi-fw.mk

diff --git a/package/Config.in b/package/Config.in
index 604ed1b..e21045f 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -253,6 +253,7 @@ source "package/owl-linux/Config.in"
 source "package/parted/Config.in"
 source "package/pciutils/Config.in"
 source "package/picocom/Config.in"
+source "package/rpi-fw/Config.in"
 source "package/read-edid/Config.in"
 source "package/rng-tools/Config.in"
 source "package/sane-backends/Config.in"
diff --git a/package/rpi-fw/Config.in b/package/rpi-fw/Config.in
new file mode 100644
index 0000000..4b5a1e8
--- /dev/null
+++ b/package/rpi-fw/Config.in
@@ -0,0 +1,9 @@
+config BR2_PACKAGE_RPI_FW
+	bool "RaspberryPi Firmware"
+	depends on BR2_arm
+	help
+	  RaspberryPi Firmware
+	  Pre-compiled binaries of the current bootloader and GPU firmware
+
+	  https://github.com/raspberrypi/firmware
+
diff --git a/package/rpi-fw/cmdline.txt b/package/rpi-fw/cmdline.txt
new file mode 100644
index 0000000..010ee3f
--- /dev/null
+++ b/package/rpi-fw/cmdline.txt
@@ -0,0 +1 @@
+dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
diff --git a/package/rpi-fw/config.txt b/package/rpi-fw/config.txt
new file mode 100644
index 0000000..ab9f7ff
--- /dev/null
+++ b/package/rpi-fw/config.txt
@@ -0,0 +1,7 @@
+arm_freq=700
+core_freq=250
+disable_overscan=1
+gpu_mem_256=100
+gpu_mem_512=100
+sdram_freq=400
+over_voltage=0
diff --git a/package/rpi-fw/rpi-fw.mk b/package/rpi-fw/rpi-fw.mk
new file mode 100644
index 0000000..e7b8674
--- /dev/null
+++ b/package/rpi-fw/rpi-fw.mk
@@ -0,0 +1,22 @@
+#############################################################
+#
+# rpi-fw
+#
+#############################################################
+RPI_FW_VERSION = 76d0ac38f16b6343c6155c80db1e4758b3a5838a
+RPI_FW_SITE = http://github.com/raspberrypi/firmware/tarball/master
+RPI_FW_LICENSE = FOSS
+RPI_FW_LICENSE_FILE = LICENCE.broadcom
+RPI_FW_INSTALL_STAGING = NO
+
+define RPI_FW_INSTALL_TARGET_CMDS
+	$(INSTALL) -D -m 0644 $(@D)/boot/bootcode.bin $(TARGET_DIR)/boot/
+	$(INSTALL) -D -m 0644 $(@D)/boot/start.elf $(TARGET_DIR)/boot/
+	$(INSTALL) -D -m 0644 $(@D)/boot/start_cd.elf $(TARGET_DIR)/boot/
+	$(INSTALL) -D -m 0644 $(@D)/boot/fixup.dat $(TARGET_DIR)/boot/
+	$(INSTALL) -D -m 0644 $(@D)/boot/fixup_cd.dat $(TARGET_DIR)/boot/
+	$(INSTALL) -D -m 0644 package/rpi-fw/cmdline.txt $(TARGET_DIR)/boot/
+	$(INSTALL) -D -m 0644 package/rpi-fw/config.txt $(TARGET_DIR)/boot/
+endef
+
+$(eval $(generic-package))
-- 
1.7.10.4

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Samuel Martin]

Hi Maxime,

2013/1/5 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>:
> Introducing a package to build the userland part of the Raspberry,
> needed by anyone who would want to build a rootfs for a RaspberryPi.
>
> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
> ---
>  package/Config.in                    |    1 +
>  package/rpi-userland/Config.in       |   12 ++++++++++++
>  package/rpi-userland/rpi-userland.mk |   25 +++++++++++++++++++++++++
>  3 files changed, 38 insertions(+)
>  create mode 100644 package/rpi-userland/Config.in
>  create mode 100644 package/rpi-userland/rpi-userland.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index a3530d7..604ed1b 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -579,6 +579,7 @@ source "package/collectd/Config.in"
>  source "package/empty/Config.in"
>  source "package/googlefontdirectory/Config.in"
>  source "package/mobile-broadband-provider-info/Config.in"
> +source "package/rpi-userland/Config.in"
>  source "package/shared-mime-info/Config.in"
>  source "package/snowball-init/Config.in"
>  source "package/sound-theme-borealis/Config.in"
> diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
> new file mode 100644
> index 0000000..3d4585f
> --- /dev/null
> +++ b/package/rpi-userland/Config.in
> @@ -0,0 +1,12 @@
> +config BR2_PACKAGE_RPI_USERLAND
> +       bool "rpi-userland"
> +       select BR2_PACKAGE_LIBCOFI
> +       help
> +         Raspberry Pi Userland contains the necessary library to use the
> +         VideoCore driver.
> +
> +         Includes source for the ARM side code to interface to:
> +         EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
> +
> +         https://github.com/raspberrypi/userland/
> +
> diff --git a/package/rpi-userland/rpi-userland.mk b/package/rpi-userland/rpi-userland.mk
> new file mode 100644
> index 0000000..5bae06d
> --- /dev/null
> +++ b/package/rpi-userland/rpi-userland.mk
> @@ -0,0 +1,25 @@
> +#############################################################
> +#
> +# rpi-userland
> +#
> +#############################################################
> +RPI_USERLAND_VERSION = 9852ce28826889e50c4d6786b942f51bccccac54
> +RPI_USERLAND_SITE = http://github.com/raspberrypi/userland/tarball/master
> +RPI_USERLAND_LICENSE = FOSS
> +RPI_USERLAND_LICENSE_FILE = LICENCE
> +RPI_USERLAND_INSTALL_STAGING = YES
> +
> +define RPI_USERLAND_POST_TARGET_CLEANUP
> +    rm -Rf $(TARGET_DIR)/opt/vc/include
> +    rm -Rf $(TARGET_DIR)/opt/vc/share
> +    rm -Rf $(TARGET_DIR)/opt/vc/src
> +    rm -f  $(TARGET_DIR)/etc/init.d/vcfiled
> +    rm -f  $(TARGET_DIR)/opt/vc/lib/*.a
> +    rmdir -p --ignore-fail-on-non-empty $(TARGET_DIR)/etc/init.d || true
Since you use the --ignore-fail-on-non-empty option, i think "|| true"
is useless.

> +    mv $(TARGET_DIR)/opt/vc/lib/* $(TARGET_DIR)/usr/lib/
> +    rm -Rf $(TARGET_DIR)/opt/vc/
> +endef

Also, since you set RPI_USERLAND_INSTALL_STAGING = YES, don't you need
to do some cleanup/fixup hook for the staging area as well?

> +
> +RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP

BTW, it is possible to avoid this cleanup hook  (or at least reduce it
to the example source) with this patch:
http://code.bulix.org/3fo6ye-82780
and by adding "-DVMCS_INSTALL_PREFIX=/usr" to the
RPI_USERLAND_CONF_OPT variable.

> +
> +$(eval $(cmake-package))
> --
> 1.7.10.4

Regards,

-- 
Samuel

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Yann E. MORIN]

Maxime, All,

On Saturday 05 January 2013 Maxime Hadjinlian wrote:
> Introducing a package to build the userland part of the Raspberry,
> needed by anyone who would want to build a rootfs for a RaspberryPi.
> 
> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[--SNIP--]
> diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
> new file mode 100644
> index 0000000..3d4585f
> --- /dev/null
> +++ b/package/rpi-userland/Config.in
> @@ -0,0 +1,12 @@
> +config BR2_PACKAGE_RPI_USERLAND
> +	bool "rpi-userland"
> +	select BR2_PACKAGE_LIBCOFI

Do not forget to add this dependency in the .mk (see below)

> +	help
> +	  Raspberry Pi Userland contains the necessary library to use the
> +	  VideoCore driver.

Then, what about calling this package something like 'videocore'.
I guess there areaother boards out there that use this GPU.

[--SNIP--]
> diff --git a/package/rpi-userland/rpi-userland.mk b/package/rpi-userland/rpi-userland.mk
> new file mode 100644
> index 0000000..5bae06d
> --- /dev/null
> +++ b/package/rpi-userland/rpi-userland.mk
> @@ -0,0 +1,25 @@
> +#############################################################
> +#
> +# rpi-userland
> +#
> +#############################################################
> +RPI_USERLAND_VERSION = 9852ce28826889e50c4d6786b942f51bccccac54
> +RPI_USERLAND_SITE = http://github.com/raspberrypi/userland/tarball/master
> +RPI_USERLAND_LICENSE = FOSS
> +RPI_USERLAND_LICENSE_FILE = LICENCE
> +RPI_USERLAND_INSTALL_STAGING = YES

RPI_USERLAND_DPENDENCIES = libcofi

Although, is libcofi really required? I just greped for 'cofi', and found
no occurence, so I'd say it is not.

> +define RPI_USERLAND_POST_TARGET_CLEANUP
> +    rm -Rf $(TARGET_DIR)/opt/vc/include
> +    rm -Rf $(TARGET_DIR)/opt/vc/share
> +    rm -Rf $(TARGET_DIR)/opt/vc/src
> +    rm -f  $(TARGET_DIR)/etc/init.d/vcfiled
> +    rm -f  $(TARGET_DIR)/opt/vc/lib/*.a
> +    rmdir -p --ignore-fail-on-non-empty $(TARGET_DIR)/etc/init.d || true
> +    mv $(TARGET_DIR)/opt/vc/lib/* $(TARGET_DIR)/usr/lib/
> +    rm -Rf $(TARGET_DIR)/opt/vc/
> +endef
> +
> +RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP
> +
> +$(eval $(cmake-package))

Untested so far, will do shortly.

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Yann E. MORIN]

Maxime, All,

On Saturday 05 January 2013 Maxime Hadjinlian wrote:
> Introducing a package to install pre-built binaries for the bootloader and the
> GPU firmware for the RaspberryPi board.
> 
> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
> ---
>  package/Config.in          |    1 +
>  package/rpi-fw/Config.in   |    9 +++++++++
>  package/rpi-fw/cmdline.txt |    1 +
>  package/rpi-fw/config.txt  |    7 +++++++
>  package/rpi-fw/rpi-fw.mk   |   22 ++++++++++++++++++++++
>  5 files changed, 40 insertions(+)
>  create mode 100644 package/rpi-fw/Config.in
>  create mode 100644 package/rpi-fw/cmdline.txt
>  create mode 100644 package/rpi-fw/config.txt
>  create mode 100644 package/rpi-fw/rpi-fw.mk
> 
> diff --git a/package/Config.in b/package/Config.in
> index 604ed1b..e21045f 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -253,6 +253,7 @@ source "package/owl-linux/Config.in"
>  source "package/parted/Config.in"
>  source "package/pciutils/Config.in"
>  source "package/picocom/Config.in"
> +source "package/rpi-fw/Config.in"

We now have a menu dedicated to storing firmware-related packages:
    Hardware handling --> Misc firmwares

>  source "package/read-edid/Config.in"
>  source "package/rng-tools/Config.in"
>  source "package/sane-backends/Config.in"
> diff --git a/package/rpi-fw/Config.in b/package/rpi-fw/Config.in
> new file mode 100644
> index 0000000..4b5a1e8
> --- /dev/null
> +++ b/package/rpi-fw/Config.in
> @@ -0,0 +1,9 @@
> +config BR2_PACKAGE_RPI_FW
> +	bool "RaspberryPi Firmware"

Today, this package is only used fior the RPI. But that GPU is not specific
to the RPI, so what about calling that package "VideoCore bootloader" ?

[--SNIP--]
> diff --git a/package/rpi-fw/cmdline.txt b/package/rpi-fw/cmdline.txt
> new file mode 100644
> index 0000000..010ee3f
> --- /dev/null
> +++ b/package/rpi-fw/cmdline.txt
> @@ -0,0 +1 @@
> +dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait

This is typically a reason why I'd like to have a generic way to expressing
the different filesystems tht form a sinlge firmware. Here, my root partition
is *not* mmcblk0p2, it's p3. And the rootfstype is *not* ext4, it's ext2.

But, I guess we'll have to live with that commandline for now... :-/

Maybe you could just omit the root settings (or replace them with place-
holders: root=/dev/XXXX rootfstype=XXXX). Of course, that will depend on
the maintainer's opinion. ;-)

> diff --git a/package/rpi-fw/config.txt b/package/rpi-fw/config.txt
> new file mode 100644
> index 0000000..ab9f7ff
> --- /dev/null
> +++ b/package/rpi-fw/config.txt
> @@ -0,0 +1,7 @@
> +arm_freq=700
> +core_freq=250
> +disable_overscan=1
> +gpu_mem_256=100
> +gpu_mem_512=100
> +sdram_freq=400
> +over_voltage=0
> diff --git a/package/rpi-fw/rpi-fw.mk b/package/rpi-fw/rpi-fw.mk
> new file mode 100644
> index 0000000..e7b8674
> --- /dev/null
> +++ b/package/rpi-fw/rpi-fw.mk
> @@ -0,0 +1,22 @@
> +#############################################################
> +#
> +# rpi-fw
> +#
> +#############################################################
> +RPI_FW_VERSION = 76d0ac38f16b6343c6155c80db1e4758b3a5838a
> +RPI_FW_SITE = http://github.com/raspberrypi/firmware/tarball/master
> +RPI_FW_LICENSE = FOSS

It's a BSD-3c.

> +RPI_FW_LICENSE_FILE = LICENCE.broadcom

It's in boot/LICENCE.broadcom

> +RPI_FW_INSTALL_STAGING = NO

Not needed, that's the default.

> +define RPI_FW_INSTALL_TARGET_CMDS
> +	$(INSTALL) -D -m 0644 $(@D)/boot/bootcode.bin $(TARGET_DIR)/boot/
> +	$(INSTALL) -D -m 0644 $(@D)/boot/start.elf $(TARGET_DIR)/boot/
> +	$(INSTALL) -D -m 0644 $(@D)/boot/start_cd.elf $(TARGET_DIR)/boot/

Is it necessary to have both the normal (start.elf) and the cut-down
(start_cd.elf) versions at the same time? I can't find a reason to have
both.

> +	$(INSTALL) -D -m 0644 $(@D)/boot/fixup.dat $(TARGET_DIR)/boot/
> +	$(INSTALL) -D -m 0644 $(@D)/boot/fixup_cd.dat $(TARGET_DIR)/boot/
> +	$(INSTALL) -D -m 0644 package/rpi-fw/cmdline.txt $(TARGET_DIR)/boot/
> +	$(INSTALL) -D -m 0644 package/rpi-fw/config.txt $(TARGET_DIR)/boot/
> +endef
> +
> +$(eval $(generic-package))

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Alex Bradbury]

On 5 January 2013 14:10, Maxime Hadjinlian <maxime.hadjinlian@gmail.com> wrote:
> Introducing a package to build the userland part of the Raspberry,
> needed by anyone who would want to build a rootfs for a RaspberryPi.
>
> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
> ---
>  package/Config.in                    |    1 +
>  package/rpi-userland/Config.in       |   12 ++++++++++++
>  package/rpi-userland/rpi-userland.mk |   25 +++++++++++++++++++++++++
>  3 files changed, 38 insertions(+)
>  create mode 100644 package/rpi-userland/Config.in
>  create mode 100644 package/rpi-userland/rpi-userland.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index a3530d7..604ed1b 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -579,6 +579,7 @@ source "package/collectd/Config.in"
>  source "package/empty/Config.in"
>  source "package/googlefontdirectory/Config.in"
>  source "package/mobile-broadband-provider-info/Config.in"
> +source "package/rpi-userland/Config.in"
>  source "package/shared-mime-info/Config.in"
>  source "package/snowball-init/Config.in"
>  source "package/sound-theme-borealis/Config.in"
> diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
> new file mode 100644
> index 0000000..3d4585f
> --- /dev/null
> +++ b/package/rpi-userland/Config.in
> @@ -0,0 +1,12 @@
> +config BR2_PACKAGE_RPI_USERLAND
> +       bool "rpi-userland"
> +       select BR2_PACKAGE_LIBCOFI

Libcofi is not required, and honestly using it via LD_PRELOAD is too
ugly to pull in to buildroot I would think. It would be better
integrated as a glibc patch, which is how it should eventually be
included in Raspbian.

> +#
> +#############################################################
> +RPI_USERLAND_VERSION = 9852ce28826889e50c4d6786b942f51bccccac54
> +RPI_USERLAND_SITE = http://github.com/raspberrypi/userland/tarball/master
> +RPI_USERLAND_LICENSE = FOSS
> +RPI_USERLAND_LICENSE_FILE = LICENCE

The license is standard 3-clause BSD.

Alex

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Alex Bradbury]

On 5 January 2013 14:10, Maxime Hadjinlian <maxime.hadjinlian@gmail.com> wrote:
> diff --git a/package/rpi-fw/config.txt b/package/rpi-fw/config.txt
> new file mode 100644
> index 0000000..ab9f7ff
> --- /dev/null
> +++ b/package/rpi-fw/config.txt
> @@ -0,0 +1,7 @@
> +arm_freq=700
> +core_freq=250
> +disable_overscan=1
> +gpu_mem_256=100
> +gpu_mem_512=100
> +sdram_freq=400
> +over_voltage=0

It's not clear to me that you want a config.txt at all, but if you are
going to add one I'm not sure it's appropriate to overclock the sdram
by default.

> +#############################################################
> +RPI_FW_VERSION = 76d0ac38f16b6343c6155c80db1e4758b3a5838a
> +RPI_FW_SITE = http://github.com/raspberrypi/firmware/tarball/master
> +RPI_FW_LICENSE = FOSS
> +RPI_FW_LICENSE_FILE = LICENCE.broadcom

The license is straight-forward and allows redistribution with no
strings attached, but is not a FOSS license.

Regards,

Alex

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Maxime Hadjinlian]

On Sat, Jan 5, 2013 at 4:52 PM, Alex Bradbury <asb@asbradbury.org> wrote:
> On 5 January 2013 14:10, Maxime Hadjinlian <maxime.hadjinlian@gmail.com> wrote:
>> diff --git a/package/rpi-fw/config.txt b/package/rpi-fw/config.txt
>> new file mode 100644
>> index 0000000..ab9f7ff
>> --- /dev/null
>> +++ b/package/rpi-fw/config.txt
>> @@ -0,0 +1,7 @@
>> +arm_freq=700
>> +core_freq=250
>> +disable_overscan=1
>> +gpu_mem_256=100
>> +gpu_mem_512=100
>> +sdram_freq=400
>> +over_voltage=0
>
> It's not clear to me that you want a config.txt at all, but if you are
> going to add one I'm not sure it's appropriate to overclock the sdram
> by default.
The sdram is not over clocked, according to this page :
http://elinux.org/RPiconfig
The default is 400Mhz.
>
>> +#############################################################
>> +RPI_FW_VERSION = 76d0ac38f16b6343c6155c80db1e4758b3a5838a
>> +RPI_FW_SITE = http://github.com/raspberrypi/firmware/tarball/master
>> +RPI_FW_LICENSE = FOSS
>> +RPI_FW_LICENSE_FILE = LICENCE.broadcom
>
> The license is straight-forward and allows redistribution with no
> strings attached, but is not a FOSS license.
>
I'll change the license, I was unable to find information that seemed valid.
> Regards,
>
> Alex

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Maxime Hadjinlian]

On Sat, Jan 5, 2013 at 4:36 PM, Yann E. MORIN <yann.morin.1998@free.fr> wrote:
> Maxime, All,
>
> On Saturday 05 January 2013 Maxime Hadjinlian wrote:
>> Introducing a package to install pre-built binaries for the bootloader and the
>> GPU firmware for the RaspberryPi board.
>>
>> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
>> ---
>>  package/Config.in          |    1 +
>>  package/rpi-fw/Config.in   |    9 +++++++++
>>  package/rpi-fw/cmdline.txt |    1 +
>>  package/rpi-fw/config.txt  |    7 +++++++
>>  package/rpi-fw/rpi-fw.mk   |   22 ++++++++++++++++++++++
>>  5 files changed, 40 insertions(+)
>>  create mode 100644 package/rpi-fw/Config.in
>>  create mode 100644 package/rpi-fw/cmdline.txt
>>  create mode 100644 package/rpi-fw/config.txt
>>  create mode 100644 package/rpi-fw/rpi-fw.mk
>>
>> diff --git a/package/Config.in b/package/Config.in
>> index 604ed1b..e21045f 100644
>> --- a/package/Config.in
>> +++ b/package/Config.in
>> @@ -253,6 +253,7 @@ source "package/owl-linux/Config.in"
>>  source "package/parted/Config.in"
>>  source "package/pciutils/Config.in"
>>  source "package/picocom/Config.in"
>> +source "package/rpi-fw/Config.in"
>
> We now have a menu dedicated to storing firmware-related packages:
>     Hardware handling --> Misc firmwares
I'll move it to that section.
>
>>  source "package/read-edid/Config.in"
>>  source "package/rng-tools/Config.in"
>>  source "package/sane-backends/Config.in"
>> diff --git a/package/rpi-fw/Config.in b/package/rpi-fw/Config.in
>> new file mode 100644
>> index 0000000..4b5a1e8
>> --- /dev/null
>> +++ b/package/rpi-fw/Config.in
>> @@ -0,0 +1,9 @@
>> +config BR2_PACKAGE_RPI_FW
>> +     bool "RaspberryPi Firmware"
>
> Today, this package is only used fior the RPI. But that GPU is not specific
> to the RPI, so what about calling that package "VideoCore bootloader" ?
As this package is pre compiled binary, I prefer to have the
specificity, nothing say that this would work on another board.
>
> [--SNIP--]
>> diff --git a/package/rpi-fw/cmdline.txt b/package/rpi-fw/cmdline.txt
>> new file mode 100644
>> index 0000000..010ee3f
>> --- /dev/null
>> +++ b/package/rpi-fw/cmdline.txt
>> @@ -0,0 +1 @@
>> +dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
>
> This is typically a reason why I'd like to have a generic way to expressing
> the different filesystems tht form a sinlge firmware. Here, my root partition
> is *not* mmcblk0p2, it's p3. And the rootfstype is *not* ext4, it's ext2.
>
> But, I guess we'll have to live with that commandline for now... :-/
>
> Maybe you could just omit the root settings (or replace them with place-
> holders: root=/dev/XXXX rootfstype=XXXX). Of course, that will depend on
> the maintainer's opinion. ;-)
I agree that it's really not a perfect solution. I'm not sure about
place-holders as it would require the user to fix the cmdline to have
a working rootfs but we already know that a user will have to since
there is a "mandatory" multiple partition.
>
>> diff --git a/package/rpi-fw/config.txt b/package/rpi-fw/config.txt
>> new file mode 100644
>> index 0000000..ab9f7ff
>> --- /dev/null
>> +++ b/package/rpi-fw/config.txt
>> @@ -0,0 +1,7 @@
>> +arm_freq=700
>> +core_freq=250
>> +disable_overscan=1
>> +gpu_mem_256=100
>> +gpu_mem_512=100
>> +sdram_freq=400
>> +over_voltage=0
>> diff --git a/package/rpi-fw/rpi-fw.mk b/package/rpi-fw/rpi-fw.mk
>> new file mode 100644
>> index 0000000..e7b8674
>> --- /dev/null
>> +++ b/package/rpi-fw/rpi-fw.mk
>> @@ -0,0 +1,22 @@
>> +#############################################################
>> +#
>> +# rpi-fw
>> +#
>> +#############################################################
>> +RPI_FW_VERSION = 76d0ac38f16b6343c6155c80db1e4758b3a5838a
>> +RPI_FW_SITE = http://github.com/raspberrypi/firmware/tarball/master
>> +RPI_FW_LICENSE = FOSS
>
> It's a BSD-3c.
>
>> +RPI_FW_LICENSE_FILE = LICENCE.broadcom
>
> It's in boot/LICENCE.broadcom
>
>> +RPI_FW_INSTALL_STAGING = NO
>
> Not needed, that's the default.
>
>> +define RPI_FW_INSTALL_TARGET_CMDS
>> +     $(INSTALL) -D -m 0644 $(@D)/boot/bootcode.bin $(TARGET_DIR)/boot/
>> +     $(INSTALL) -D -m 0644 $(@D)/boot/start.elf $(TARGET_DIR)/boot/
>> +     $(INSTALL) -D -m 0644 $(@D)/boot/start_cd.elf $(TARGET_DIR)/boot/
>
> Is it necessary to have both the normal (start.elf) and the cut-down
> (start_cd.elf) versions at the same time? I can't find a reason to have
> both.
>
>> +     $(INSTALL) -D -m 0644 $(@D)/boot/fixup.dat $(TARGET_DIR)/boot/
>> +     $(INSTALL) -D -m 0644 $(@D)/boot/fixup_cd.dat $(TARGET_DIR)/boot/
>> +     $(INSTALL) -D -m 0644 package/rpi-fw/cmdline.txt $(TARGET_DIR)/boot/
>> +     $(INSTALL) -D -m 0644 package/rpi-fw/config.txt $(TARGET_DIR)/boot/
>> +endef
>> +
>> +$(eval $(generic-package))
>
> Regards,
> Yann E. MORIN.
>
> --
> .-----------------.--------------------.------------------.--------------------.
> |  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
> | +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
> '------------------------------^-------^------------------^--------------------'
>

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Maxime Hadjinlian]

On Sat, Jan 5, 2013 at 4:18 PM, Samuel Martin <s.martin49@gmail.com> wrote:
> Hi Maxime,
Hi Samuel,
>
> 2013/1/5 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>:
>> Introducing a package to build the userland part of the Raspberry,
>> needed by anyone who would want to build a rootfs for a RaspberryPi.
>>
>> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
>> ---
>>  package/Config.in                    |    1 +
>>  package/rpi-userland/Config.in       |   12 ++++++++++++
>>  package/rpi-userland/rpi-userland.mk |   25 +++++++++++++++++++++++++
>>  3 files changed, 38 insertions(+)
>>  create mode 100644 package/rpi-userland/Config.in
>>  create mode 100644 package/rpi-userland/rpi-userland.mk
>>
>> diff --git a/package/Config.in b/package/Config.in
>> index a3530d7..604ed1b 100644
>> --- a/package/Config.in
>> +++ b/package/Config.in
>> @@ -579,6 +579,7 @@ source "package/collectd/Config.in"
>>  source "package/empty/Config.in"
>>  source "package/googlefontdirectory/Config.in"
>>  source "package/mobile-broadband-provider-info/Config.in"
>> +source "package/rpi-userland/Config.in"
>>  source "package/shared-mime-info/Config.in"
>>  source "package/snowball-init/Config.in"
>>  source "package/sound-theme-borealis/Config.in"
>> diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
>> new file mode 100644
>> index 0000000..3d4585f
>> --- /dev/null
>> +++ b/package/rpi-userland/Config.in
>> @@ -0,0 +1,12 @@
>> +config BR2_PACKAGE_RPI_USERLAND
>> +       bool "rpi-userland"
>> +       select BR2_PACKAGE_LIBCOFI
>> +       help
>> +         Raspberry Pi Userland contains the necessary library to use the
>> +         VideoCore driver.
>> +
>> +         Includes source for the ARM side code to interface to:
>> +         EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
>> +
>> +         https://github.com/raspberrypi/userland/
>> +
>> diff --git a/package/rpi-userland/rpi-userland.mk b/package/rpi-userland/rpi-userland.mk
>> new file mode 100644
>> index 0000000..5bae06d
>> --- /dev/null
>> +++ b/package/rpi-userland/rpi-userland.mk
>> @@ -0,0 +1,25 @@
>> +#############################################################
>> +#
>> +# rpi-userland
>> +#
>> +#############################################################
>> +RPI_USERLAND_VERSION = 9852ce28826889e50c4d6786b942f51bccccac54
>> +RPI_USERLAND_SITE = http://github.com/raspberrypi/userland/tarball/master
>> +RPI_USERLAND_LICENSE = FOSS
>> +RPI_USERLAND_LICENSE_FILE = LICENCE
>> +RPI_USERLAND_INSTALL_STAGING = YES
>> +
>> +define RPI_USERLAND_POST_TARGET_CLEANUP
>> +    rm -Rf $(TARGET_DIR)/opt/vc/include
>> +    rm -Rf $(TARGET_DIR)/opt/vc/share
>> +    rm -Rf $(TARGET_DIR)/opt/vc/src
>> +    rm -f  $(TARGET_DIR)/etc/init.d/vcfiled
>> +    rm -f  $(TARGET_DIR)/opt/vc/lib/*.a
>> +    rmdir -p --ignore-fail-on-non-empty $(TARGET_DIR)/etc/init.d || true
> Since you use the --ignore-fail-on-non-empty option, i think "|| true"
> is useless.
You're totally right.
>
>> +    mv $(TARGET_DIR)/opt/vc/lib/* $(TARGET_DIR)/usr/lib/
>> +    rm -Rf $(TARGET_DIR)/opt/vc/
>> +endef
>
> Also, since you set RPI_USERLAND_INSTALL_STAGING = YES, don't you need
> to do some cleanup/fixup hook for the staging area as well?
Is it really useful to cleanup the staging area ?
>
>> +
>> +RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP
>
> BTW, it is possible to avoid this cleanup hook  (or at least reduce it
> to the example source) with this patch:
> http://code.bulix.org/3fo6ye-82780
> and by adding "-DVMCS_INSTALL_PREFIX=/usr" to the
> RPI_USERLAND_CONF_OPT variable.
I think part of the cleanup is useful so we don't create a rootfs that
comes with example sources code and useless files for runtime.
In the other part, it's perfectly possible to add this option so it
would install itself in the right place.
>
>> +
>> +$(eval $(cmake-package))
>> --
>> 1.7.10.4
>
> Regards,
>
> --
> Samuel

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Maxime Hadjinlian]

On Sat, Jan 5, 2013 at 4:41 PM, Alex Bradbury <asb@asbradbury.org> wrote:
> On 5 January 2013 14:10, Maxime Hadjinlian <maxime.hadjinlian@gmail.com> wrote:
>> Introducing a package to build the userland part of the Raspberry,
>> needed by anyone who would want to build a rootfs for a RaspberryPi.
>>
>> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
>> ---
>>  package/Config.in                    |    1 +
>>  package/rpi-userland/Config.in       |   12 ++++++++++++
>>  package/rpi-userland/rpi-userland.mk |   25 +++++++++++++++++++++++++
>>  3 files changed, 38 insertions(+)
>>  create mode 100644 package/rpi-userland/Config.in
>>  create mode 100644 package/rpi-userland/rpi-userland.mk
>>
>> diff --git a/package/Config.in b/package/Config.in
>> index a3530d7..604ed1b 100644
>> --- a/package/Config.in
>> +++ b/package/Config.in
>> @@ -579,6 +579,7 @@ source "package/collectd/Config.in"
>>  source "package/empty/Config.in"
>>  source "package/googlefontdirectory/Config.in"
>>  source "package/mobile-broadband-provider-info/Config.in"
>> +source "package/rpi-userland/Config.in"
>>  source "package/shared-mime-info/Config.in"
>>  source "package/snowball-init/Config.in"
>>  source "package/sound-theme-borealis/Config.in"
>> diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
>> new file mode 100644
>> index 0000000..3d4585f
>> --- /dev/null
>> +++ b/package/rpi-userland/Config.in
>> @@ -0,0 +1,12 @@
>> +config BR2_PACKAGE_RPI_USERLAND
>> +       bool "rpi-userland"
>> +       select BR2_PACKAGE_LIBCOFI
>
> Libcofi is not required, and honestly using it via LD_PRELOAD is too
> ugly to pull in to buildroot I would think. It would be better
> integrated as a glibc patch, which is how it should eventually be
> included in Raspbian.
It's true that libcofi is not required, but I didn't want to add it an
independent package, although maybe that would be the best solution.
Also, as you said, it's really ugly but as far as I can tell, really
useful for a RaspberryPi.
>
>> +#
>> +#############################################################
>> +RPI_USERLAND_VERSION = 9852ce28826889e50c4d6786b942f51bccccac54
>> +RPI_USERLAND_SITE = http://github.com/raspberrypi/userland/tarball/master
>> +RPI_USERLAND_LICENSE = FOSS
>> +RPI_USERLAND_LICENSE_FILE = LICENCE
>
> The license is standard 3-clause BSD.
Thanks, I'll fix it
>
> Alex

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Alex Bradbury]

On 5 January 2013 16:09, Maxime Hadjinlian <maxime.hadjinlian@gmail.com> wrote:
> On Sat, Jan 5, 2013 at 4:52 PM, Alex Bradbury <asb@asbradbury.org> wrote:
>> It's not clear to me that you want a config.txt at all, but if you are
>> going to add one I'm not sure it's appropriate to overclock the sdram
>> by default.
> The sdram is not over clocked, according to this page :
> http://elinux.org/RPiconfig
> The default is 400Mhz.

You are of course correct, my bad.

Alex

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Samuel Martin]

Hi Maxime,

2013/1/5 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>:
> On Sat, Jan 5, 2013 at 4:18 PM, Samuel Martin <s.martin49@gmail.com> wrote:
>> Hi Maxime,
> Hi Samuel,
>>
>> 2013/1/5 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>:
[snip]
>>> +
>>> +define RPI_USERLAND_POST_TARGET_CLEANUP
>>> +    rm -Rf $(TARGET_DIR)/opt/vc/include
>>> +    rm -Rf $(TARGET_DIR)/opt/vc/share
>>> +    rm -Rf $(TARGET_DIR)/opt/vc/src
>>> +    rm -f  $(TARGET_DIR)/etc/init.d/vcfiled
>>> +    rm -f  $(TARGET_DIR)/opt/vc/lib/*.a
>>> +    rmdir -p --ignore-fail-on-non-empty $(TARGET_DIR)/etc/init.d || true
>> Since you use the --ignore-fail-on-non-empty option, i think "|| true"
>> is useless.
> You're totally right.
>>
>>> +    mv $(TARGET_DIR)/opt/vc/lib/* $(TARGET_DIR)/usr/lib/
>>> +    rm -Rf $(TARGET_DIR)/opt/vc/
>>> +endef
>>
>> Also, since you set RPI_USERLAND_INSTALL_STAGING = YES, don't you need
>> to do some cleanup/fixup hook for the staging area as well?
> Is it really useful to cleanup the staging area ?
Cleanup, not necessary...
But at least, fix the headers, libraries (static an dynamic) and
perhaps the data install locations if you keep /opt/vc as install
prefix, otherwise you will/may have some trouble to link against it...

>>
>>> +
>>> +RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP
>>
>> BTW, it is possible to avoid this cleanup hook  (or at least reduce it
>> to the example source) with this patch:
>> http://code.bulix.org/3fo6ye-82780
>> and by adding "-DVMCS_INSTALL_PREFIX=/usr" to the
>> RPI_USERLAND_CONF_OPT variable.
> I think part of the cleanup is useful so we don't create a rootfs that
> comes with example sources code and useless files for runtime.
> In the other part, it's perfectly possible to add this option so it
> would install itself in the right place.
I agree.


Regards,

-- 
Samuel

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Thomas Petazzoni]

Dear Samuel Martin,

On Sat, 5 Jan 2013 16:18:34 +0100, Samuel Martin wrote:
> > +RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP
> 
> BTW, it is possible to avoid this cleanup hook  (or at least reduce it
> to the example source) with this patch:
> http://code.bulix.org/3fo6ye-82780
> and by adding "-DVMCS_INSTALL_PREFIX=/usr" to the
> RPI_USERLAND_CONF_OPT variable.

This looks good. I would really prefer to see those libs and headers
installed in /usr, like all other libs and headers.

Maxime, can you integrate Samuel's patch?

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Thomas Petazzoni]

Dear Yann E. MORIN,

On Sat, 5 Jan 2013 16:36:51 +0100, Yann E. MORIN wrote:

> > +++ b/package/rpi-fw/Config.in
> > @@ -0,0 +1,9 @@
> > +config BR2_PACKAGE_RPI_FW
> > +	bool "RaspberryPi Firmware"
> 
> Today, this package is only used fior the RPI. But that GPU is not specific
> to the RPI, so what about calling that package "VideoCore bootloader" ?

I am quite sure the start.elf code is Rasberry Pi specific, so I don't
think this package is just a "VideoCore bootloader".

> > +++ b/package/rpi-fw/cmdline.txt
> > @@ -0,0 +1 @@
> > +dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
> 
> This is typically a reason why I'd like to have a generic way to expressing
> the different filesystems tht form a sinlge firmware. Here, my root partition
> is *not* mmcblk0p2, it's p3. And the rootfstype is *not* ext4, it's ext2.
> 
> But, I guess we'll have to live with that commandline for now... :-/
> 
> Maybe you could just omit the root settings (or replace them with place-
> holders: root=/dev/XXXX rootfstype=XXXX). Of course, that will depend on
> the maintainer's opinion. ;-)

I would like to see a comment added in this file, which mentions this
is only a sample command line, and we recommend to override it on a
per-project basis using a post-build script.

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Yann E. MORIN]

Maxime, Thomas, All,

On Saturday 05 January 2013 Thomas Petazzoni wrote:
> Dear Yann E. MORIN,
> 
> On Sat, 5 Jan 2013 16:36:51 +0100, Yann E. MORIN wrote:
> 
> > > +++ b/package/rpi-fw/Config.in
> > > @@ -0,0 +1,9 @@
> > > +config BR2_PACKAGE_RPI_FW
> > > +	bool "RaspberryPi Firmware"
> > 
> > Today, this package is only used fior the RPI. But that GPU is not specific
> > to the RPI, so what about calling that package "VideoCore bootloader" ?
> 
> I am quite sure the start.elf code is Rasberry Pi specific, so I don't
> think this package is just a "VideoCore bootloader".

Right.

> > > +++ b/package/rpi-fw/cmdline.txt
> > > @@ -0,0 +1 @@
> > > +dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
> > 
> > This is typically a reason why I'd like to have a generic way to expressing
> > the different filesystems tht form a sinlge firmware. Here, my root partition
> > is *not* mmcblk0p2, it's p3. And the rootfstype is *not* ext4, it's ext2.
> > 
> > But, I guess we'll have to live with that commandline for now... :-/
> > 
> > Maybe you could just omit the root settings (or replace them with place-
> > holders: root=/dev/XXXX rootfstype=XXXX). Of course, that will depend on
> > the maintainer's opinion. ;-)
> 
> I would like to see a comment added in this file, which mentions this
> is only a sample command line, and we recommend to override it on a
> per-project basis using a post-build script.

I am not sure the bootloader knows how to parse comments in this file.
Instead of installing it as 'cmdline.txt', what about installing it as
'cmdline-sample.txt' with the comment?

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Maxime Hadjinlian]

On Sat, Jan 5, 2013 at 9:00 PM, Yann E. MORIN <yann.morin.1998@free.fr> wrote:
> Maxime, Thomas, All,
>
> On Saturday 05 January 2013 Thomas Petazzoni wrote:
>> Dear Yann E. MORIN,
>>
>> On Sat, 5 Jan 2013 16:36:51 +0100, Yann E. MORIN wrote:
>>
>> > > +++ b/package/rpi-fw/Config.in
>> > > @@ -0,0 +1,9 @@
>> > > +config BR2_PACKAGE_RPI_FW
>> > > + bool "RaspberryPi Firmware"
>> >
>> > Today, this package is only used fior the RPI. But that GPU is not specific
>> > to the RPI, so what about calling that package "VideoCore bootloader" ?
>>
>> I am quite sure the start.elf code is Rasberry Pi specific, so I don't
>> think this package is just a "VideoCore bootloader".
>
> Right.
>
>> > > +++ b/package/rpi-fw/cmdline.txt
>> > > @@ -0,0 +1 @@
>> > > +dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
>> >
>> > This is typically a reason why I'd like to have a generic way to expressing
>> > the different filesystems tht form a sinlge firmware. Here, my root partition
>> > is *not* mmcblk0p2, it's p3. And the rootfstype is *not* ext4, it's ext2.
>> >
>> > But, I guess we'll have to live with that commandline for now... :-/
>> >
>> > Maybe you could just omit the root settings (or replace them with place-
>> > holders: root=/dev/XXXX rootfstype=XXXX). Of course, that will depend on
>> > the maintainer's opinion. ;-)
>>
>> I would like to see a comment added in this file, which mentions this
>> is only a sample command line, and we recommend to override it on a
>> per-project basis using a post-build script.
>
> I am not sure the bootloader knows how to parse comments in this file.
> Instead of installing it as 'cmdline.txt', what about installing it as
> 'cmdline-sample.txt' with the comment?
It should be possible to put the whole cmdline as an "option" in
config.txt and thus we could put comments in there. I'll look into it.
>
> Regards,
> Yann E. MORIN.
>
> --
> .-----------------.--------------------.------------------.--------------------.
> |  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
> | +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
> '------------------------------^-------^------------------^--------------------'
>

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Maxime Hadjinlian]

On Sat, Jan 5, 2013 at 6:39 PM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
> Dear Samuel Martin,
>
> On Sat, 5 Jan 2013 16:18:34 +0100, Samuel Martin wrote:
>> > +RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP
>>
>> BTW, it is possible to avoid this cleanup hook  (or at least reduce it
>> to the example source) with this patch:
>> http://code.bulix.org/3fo6ye-82780
>> and by adding "-DVMCS_INSTALL_PREFIX=/usr" to the
>> RPI_USERLAND_CONF_OPT variable.
>
> This looks good. I would really prefer to see those libs and headers
> installed in /usr, like all other libs and headers.
>
> Maxime, can you integrate Samuel's patch?
Yep, I haven't had time to test it but I will do and send my v2 when it's done.
>
> Thomas
> --
> Thomas Petazzoni, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Samuel Martin]

Maxime,

2013/1/5 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>:
> On Sat, Jan 5, 2013 at 6:39 PM, Thomas Petazzoni
> <thomas.petazzoni@free-electrons.com> wrote:
>> Dear Samuel Martin,
>>
>> On Sat, 5 Jan 2013 16:18:34 +0100, Samuel Martin wrote:
>>> > +RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP
>>>
>>> BTW, it is possible to avoid this cleanup hook  (or at least reduce it
>>> to the example source) with this patch:
>>> http://code.bulix.org/3fo6ye-82780
>>> and by adding "-DVMCS_INSTALL_PREFIX=/usr" to the
>>> RPI_USERLAND_CONF_OPT variable.
>>
>> This looks good. I would really prefer to see those libs and headers
>> installed in /usr, like all other libs and headers.
>>
>> Maxime, can you integrate Samuel's patch?
> Yep, I haven't had time to test it but I will do and send my v2 when it's done.

BTW, you can also try to just remove the "FORCE" in the relevant
"set(VMCS_INSTALL_PREFIX ...)" line; it should have the same effect.


Regards,

-- 
Samuel

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Maxime Hadjinlian]

Introducing a package to build the userland part of the Raspberry,
needed by anyone who would want to build a rootfs for a RaspberryPi.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
---
 package/Config.in                                  |    1 +
 package/rpi-userland/Config.in                     |   11 +++++++++
 ...make-vmcs.cmake-allow-to-override-VMCS_IN.patch |   26 ++++++++++++++++++++
 package/rpi-userland/rpi-userland.mk               |   19 ++++++++++++++
 4 files changed, 57 insertions(+)
 create mode 100644 package/rpi-userland/Config.in
 create mode 100644 package/rpi-userland/rpi-userland-makefiles-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
 create mode 100644 package/rpi-userland/rpi-userland.mk

diff --git a/package/Config.in b/package/Config.in
index 9b50f4b..17205fe 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -580,6 +580,7 @@ source "package/collectd/Config.in"
 source "package/empty/Config.in"
 source "package/googlefontdirectory/Config.in"
 source "package/mobile-broadband-provider-info/Config.in"
+source "package/rpi-userland/Config.in"
 source "package/shared-mime-info/Config.in"
 source "package/snowball-init/Config.in"
 source "package/sound-theme-borealis/Config.in"
diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
new file mode 100644
index 0000000..b596a36
--- /dev/null
+++ b/package/rpi-userland/Config.in
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_RPI_USERLAND
+	bool "rpi-userland"
+	help
+	  Raspberry Pi Userland contains the necessary library to use the
+	  VideoCore driver.
+
+	  Includes source for the ARM side code to interface to: 
+	  EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
+
+	  https://github.com/raspberrypi/userland/
+
diff --git a/package/rpi-userland/rpi-userland-makefiles-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch b/package/rpi-userland/rpi-userland-makefiles-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
new file mode 100644
index 0000000..e54d29e
--- /dev/null
+++ b/package/rpi-userland/rpi-userland-makefiles-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
@@ -0,0 +1,26 @@
+From fec2560cfcb8d3398e4f1ccc3de7923365873676 Mon Sep 17 00:00:00 2001
+From: Samuel Martin <s.martin49@gmail.com>
+Date: Sat, 5 Jan 2013 16:04:55 +0100
+Subject: [PATCH] makefiles/cmake/vmcs.cmake: allow to override
+ VMCS_INSTALL_PREFIX
+
+Signed-off-by: Samuel Martin <s.martin49@gmail.com>
+---
+ makefiles/cmake/vmcs.cmake | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/makefiles/cmake/vmcs.cmake b/makefiles/cmake/vmcs.cmake
+index 0f8641b..cc70cca 100644
+--- a/makefiles/cmake/vmcs.cmake
++++ b/makefiles/cmake/vmcs.cmake
+@@ -9,7 +9,7 @@ INCLUDE(CPack)
+ # Where shall we install?
+ if (ANDROID)
+   SET(VMCS_INSTALL_PREFIX "/vendor/brcm/islands" CACHE PATH "Prefix prepended to install directories" FORCE)
+-else()
++elseif(NOT DEFINED VMCS_INSTALL_PREFIX)
+   SET(VMCS_INSTALL_PREFIX "/opt/vc" CACHE PATH "Prefix prepended to install directories" FORCE)
+ endif()
+ 
+-- 
+1.8.1
diff --git a/package/rpi-userland/rpi-userland.mk b/package/rpi-userland/rpi-userland.mk
new file mode 100644
index 0000000..2b919ea
--- /dev/null
+++ b/package/rpi-userland/rpi-userland.mk
@@ -0,0 +1,19 @@
+#############################################################
+#
+# rpi-userland
+#
+#############################################################
+RPI_USERLAND_VERSION = 9852ce28826889e50c4d6786b942f51bccccac54
+RPI_USERLAND_SITE = http://github.com/raspberrypi/userland/tarball/master
+RPI_USERLAND_LICENSE = BSD-3c
+RPI_USERLAND_LICENSE_FILE = LICENCE
+RPI_USERLAND_INSTALL_STAGING = YES
+RPI_USERLAND_CONF_OPT = -DVMCS_INSTALL_PREFIX=/usr
+
+define RPI_USERLAND_POST_TARGET_CLEANUP
+    rm -Rf $(TARGET_DIR)/usr/src
+endef
+
+RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP
+
+$(eval $(cmake-package))
-- 
1.7.10.4

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Floris Bos]

On 01/05/2013 03:10 PM, Maxime Hadjinlian wrote:
> Introducing a package to build the userland part of the Raspberry,
> needed by anyone who would want to build a rootfs for a RaspberryPi.

rpi-userland does not build with the default buildroot uClibc toolchain.

==
[ 25%] 
/hdd/max/dev/tmp/buildroot/output/build/rpi-userland-9852ce28826889e50c4d6786b942f51bccccac54/interface/vcos/glibc/vcos_backtrace.c:30:22: 
fatal error: execinfo.h: No such file or directory
==

Ran into the same issue a while back.
You can borrow my patch: 
https://github.com/maxnet/userland/commit/93ae1bcd8005216baf7361ba860b53a2cf2e0401



Yours sincerely,

Floris Bos

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Floris Bos]

On 01/05/2013 03:10 PM, Maxime Hadjinlian wrote:
> Introducing a package to install pre-built binaries for the bootloader and the
> GPU firmware for the RaspberryPi board.

Fails to install.
You need to create the target/boot directory first.

==

/usr/bin/install -D -m 0644 
/hdd/max/dev/tmp/buildroot/output/build/rpi-fw-76d0ac38f16b6343c6155c80db1e4758b3a5838a/boot/bootcode.bin 
/hdd/max/dev/tmp/buildroot/output/target/boot/
/usr/bin/install: target 
`/hdd/max/dev/tmp/buildroot/output/target/boot/' is not a directory: No 
such file or directory
make: *** 
[/hdd/max/dev/tmp/buildroot/output/build/rpi-fw-76d0ac38f16b6343c6155c80db1e4758b3a5838a/.stamp_target_installed] 
Error 1
==


But another question would be if bootloader files really should be 
installed under target.
Keep in mind that the Raspberry Pi boot files are normally kept on a FAT 
partition seperate from the root file system.


Yours sincerely,

Floris Bos

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Maxime Hadjinlian]

On Sun, Jan 6, 2013 at 3:26 AM, Floris Bos <bos@je-eigen-domein.nl> wrote:
> On 01/05/2013 03:10 PM, Maxime Hadjinlian wrote:
>>
>> Introducing a package to build the userland part of the Raspberry,
>> needed by anyone who would want to build a rootfs for a RaspberryPi.
>
>
> rpi-userland does not build with the default buildroot uClibc toolchain.
>
> ==
> [ 25%]
> /hdd/max/dev/tmp/buildroot/output/build/rpi-userland-9852ce28826889e50c4d6786b942f51bccccac54/interface/vcos/glibc/vcos_backtrace.c:30:22:
> fatal error: execinfo.h: No such file or directory
> ==
>
> Ran into the same issue a while back.
> You can borrow my patch:
> https://github.com/maxnet/userland/commit/93ae1bcd8005216baf7361ba860b53a2cf2e0401
>
Thanks, I builded using eglibc at the moment.
Could you push your patch upstream so we won't need to have it ?
>
>
> Yours sincerely,
>
> Floris Bos
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Maxime Hadjinlian]

On Sun, Jan 6, 2013 at 3:40 AM, Floris Bos <bos@je-eigen-domein.nl> wrote:
> On 01/05/2013 03:10 PM, Maxime Hadjinlian wrote:
>>
>> Introducing a package to install pre-built binaries for the bootloader and
>> the
>> GPU firmware for the RaspberryPi board.
>
>
> Fails to install.
> You need to create the target/boot directory first.
>
Thanks, I was using a custom skeleton, forgot to get rid of it to try out.
> ==
>
> /usr/bin/install -D -m 0644
> /hdd/max/dev/tmp/buildroot/output/build/rpi-fw-76d0ac38f16b6343c6155c80db1e4758b3a5838a/boot/bootcode.bin
> /hdd/max/dev/tmp/buildroot/output/target/boot/
> /usr/bin/install: target `/hdd/max/dev/tmp/buildroot/output/target/boot/' is
> not a directory: No such file or directory
> make: ***
> [/hdd/max/dev/tmp/buildroot/output/build/rpi-fw-76d0ac38f16b6343c6155c80db1e4758b3a5838a/.stamp_target_installed]
> Error 1
> ==
>
>
> But another question would be if bootloader files really should be installed
> under target.
> Keep in mind that the Raspberry Pi boot files are normally kept on a FAT
> partition seperate from the root file system.
This question can't be solved right now but it's in the pipe, see a
mail by Yann E. Morin in the mailing list a few weeks ago.
>
>
> Yours sincerely,
>
> Floris Bos
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Floris Bos]

On 01/06/2013 11:28 AM, Maxime Hadjinlian wrote:
> >rpi-userland does not build with the default buildroot uClibc toolchain.
> Thanks, I builded using eglibc at the moment.
> Could you push your patch upstream so we won't need to have it ?

Send a pull request to upstream a month ago, but did not receive any 
response.

https://github.com/raspberrypi/userland/pull/7


Yours sincerely,

Floris Bos

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Peter Korsgaard]

>>>>> "Floris" == Floris Bos <bos@je-eigen-domein.nl> writes:

Hi,

 Floris> Fails to install.
 Floris> You need to create the target/boot directory first.

 Floris> ==

 Floris> /usr/bin/install -D -m 0644
 Floris> /hdd/max/dev/tmp/buildroot/output/build/rpi-fw-76d0ac38f16b6343c6155c80db1e4758b3a5838a/boot/bootcode.bin
 Floris> /hdd/max/dev/tmp/buildroot/output/target/boot/
 Floris> /usr/bin/install: target
 Floris> /hdd/max/dev/tmp/buildroot/output/target/boot/' is not a directory: No
 Floris> such file or directory
 Floris> make: ***
 Floris> [/hdd/max/dev/tmp/buildroot/output/build/rpi-fw-76d0ac38f16b6343c6155c80db1e4758b3a5838a/.stamp_target_installed]
 Floris> Error 1
 Floris> ==

That's the point of using install -D (create dest dirs as needed), but
you need to provide it with the destination file name as well - E.G
$(TARGET_DIR)/boot/bootcode.bin

 Floris> But another question would be if bootloader files really should be
 Floris> installed under target.
 Floris> Keep in mind that the Raspberry Pi boot files are normally kept on a
 Floris> FAT partition seperate from the root file system.

Indeed, it probably makes more sense to just put it in IMAGES_DIR
instead.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Maxime Hadjinlian]

On Sun, Jan 6, 2013 at 3:26 PM, Peter Korsgaard <jacmet@uclibc.org> wrote:
>>>>>> "Floris" == Floris Bos <bos@je-eigen-domein.nl> writes:
>
> Hi,
>
>  Floris> Fails to install.
>  Floris> You need to create the target/boot directory first.
>
>  Floris> ==
>
>  Floris> /usr/bin/install -D -m 0644
>  Floris> /hdd/max/dev/tmp/buildroot/output/build/rpi-fw-76d0ac38f16b6343c6155c80db1e4758b3a5838a/boot/bootcode.bin
>  Floris> /hdd/max/dev/tmp/buildroot/output/target/boot/
>  Floris> /usr/bin/install: target
>  Floris> /hdd/max/dev/tmp/buildroot/output/target/boot/' is not a directory: No
>  Floris> such file or directory
>  Floris> make: ***
>  Floris> [/hdd/max/dev/tmp/buildroot/output/build/rpi-fw-76d0ac38f16b6343c6155c80db1e4758b3a5838a/.stamp_target_installed]
>  Floris> Error 1
>  Floris> ==
>
> That's the point of using install -D (create dest dirs as needed), but
> you need to provide it with the destination file name as well - E.G
> $(TARGET_DIR)/boot/bootcode.bin
>
>  Floris> But another question would be if bootloader files really should be
>  Floris> installed under target.
>  Floris> Keep in mind that the Raspberry Pi boot files are normally kept on a
>  Floris> FAT partition seperate from the root file system.
>
> Indeed, it probably makes more sense to just put it in IMAGES_DIR
> instead.
How about putting them all in a rpi-firmware folder inside IMAGES_DIR
? I don't want to just throw them in this folder, it would be a pain
afterwards since they all go in the same place.
>
> --
> Bye, Peter Korsgaard
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Maxime Hadjinlian]

Introducing a package to build the userland part of the Raspberry,
needed by anyone who would want to build a rootfs for a RaspberryPi.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
---
 package/Config.in                                  |    1 +
 package/rpi-userland/Config.in                     |   18 +++++
 ...0002-Test-for-the-existence-of-execinfo-h.patch |   69 ++++++++++++++++++++
 ...make-vmcs.cmake-allow-to-override-VMCS_IN.patch |   26 ++++++++
 package/rpi-userland/rpi-userland.mk               |   20 ++++++
 5 files changed, 134 insertions(+)
 create mode 100644 package/rpi-userland/Config.in
 create mode 100644 package/rpi-userland/rpi-userland-0002-Test-for-the-existence-of-execinfo-h.patch
 create mode 100644 package/rpi-userland/rpi-userland-makefiles-0001-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
 create mode 100644 package/rpi-userland/rpi-userland.mk

diff --git a/package/Config.in b/package/Config.in
index 9b50f4b..17205fe 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -580,6 +580,7 @@ source "package/collectd/Config.in"
 source "package/empty/Config.in"
 source "package/googlefontdirectory/Config.in"
 source "package/mobile-broadband-provider-info/Config.in"
+source "package/rpi-userland/Config.in"
 source "package/shared-mime-info/Config.in"
 source "package/snowball-init/Config.in"
 source "package/sound-theme-borealis/Config.in"
diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
new file mode 100644
index 0000000..646d74e
--- /dev/null
+++ b/package/rpi-userland/Config.in
@@ -0,0 +1,18 @@
+config BR2_PACKAGE_RPI_USERLAND
+	bool "RaspberryPi userland"
+	depends on BR2_INSTALL_LIBSTDCPP
+	depends on BR2_LARGEFILE
+	help
+	  Raspberry Pi Userland contains the necessary library to use the
+	  VideoCore driver.
+
+	  Includes source for the ARM side code to interface to: 
+	  EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
+
+	  https://github.com/raspberrypi/userland/
+
+comment "RaspberryPi userland requires a toolchain with C++ support enabled"
+	depends on !BR2_INSTALL_LIBSTDCPP
+
+comment "RaspberryPi userland requires a toolchain with LARGEFILE support"
+	depends on !BR2_LARGEFILE
diff --git a/package/rpi-userland/rpi-userland-0002-Test-for-the-existence-of-execinfo-h.patch b/package/rpi-userland/rpi-userland-0002-Test-for-the-existence-of-execinfo-h.patch
new file mode 100644
index 0000000..ccc67d9
--- /dev/null
+++ b/package/rpi-userland/rpi-userland-0002-Test-for-the-existence-of-execinfo-h.patch
@@ -0,0 +1,69 @@
+From 93ae1bcd8005216baf7361ba860b53a2cf2e0401 Mon Sep 17 00:00:00 2001
+From: Floris Bos <bos@je-eigen-domein.nl>
+Date: Sun, 25 Nov 2012 19:05:07 +0100
+Subject: [PATCH] Test for the existence of execinfo.h
+
+Previous code assumed that on Linux the execinfo.h functions are always available, which is a glibc extension.
+This change fixes building the library under buildroot, which uses uClibc by default
+---
+ interface/vcos/glibc/vcos_backtrace.c |    7 +++++--
+ makefiles/cmake/arm-linux.cmake       |    4 ++++
+ makefiles/cmake/cmake_config.h.in     |    3 +++
+ 3 files changed, 12 insertions(+), 2 deletions(-)
+
+diff --git a/interface/vcos/glibc/vcos_backtrace.c b/interface/vcos/glibc/vcos_backtrace.c
+index 474a328..3bb8aa3 100644
+--- a/interface/vcos/glibc/vcos_backtrace.c
++++ b/interface/vcos/glibc/vcos_backtrace.c
+@@ -26,7 +26,10 @@
+ */
+ 
+ #include <interface/vcos/vcos.h>
+-#ifdef __linux__
++#ifdef HAVE_CMAKE_CONFIG
++#include "cmake_config.h"
++#endif
++#ifdef HAVE_EXECINFO_H
+ #include <execinfo.h>
+ #endif
+ #include <stdio.h>
+@@ -35,7 +38,7 @@
+ 
+ void vcos_backtrace_self(void)
+ {
+-#ifdef __linux__
++#ifdef HAVE_EXECINFO_H
+    void *stack[64];
+    int depth = backtrace(stack, sizeof(stack)/sizeof(stack[0]));
+    char **names = backtrace_symbols(stack, depth);
+diff --git a/makefiles/cmake/arm-linux.cmake b/makefiles/cmake/arm-linux.cmake
+index 89d8bbf..6f2114f 100644
+--- a/makefiles/cmake/arm-linux.cmake
++++ b/makefiles/cmake/arm-linux.cmake
+@@ -115,6 +115,10 @@ try_compile(HAVE_MTRACE
+             ${CMAKE_SOURCE_DIR}/makefiles/cmake/srcs/test-mtrace.c
+             OUTPUT_VARIABLE foo)
+ 
++# test for existence of execinfo.h header
++include(CheckIncludeFile)
++check_include_file(execinfo.h HAVE_EXECINFO_H)
++
+ add_definitions(-DHAVE_CMAKE_CONFIG)
+ configure_file (
+     "makefiles/cmake/cmake_config.h.in"
+diff --git a/makefiles/cmake/cmake_config.h.in b/makefiles/cmake/cmake_config.h.in
+index 5f08ad5..080b8e8 100644
+--- a/makefiles/cmake/cmake_config.h.in
++++ b/makefiles/cmake/cmake_config.h.in
+@@ -8,5 +8,8 @@
+ /** Do we have support for GLIBC mtrace() ? */
+ #cmakedefine                    HAVE_MTRACE
+ 
++/** Do we have the execinfo.h include file ? */
++#cmakedefine                    HAVE_EXECINFO_H
++
+ #endif
+ 
+-- 
+1.7.10
+
diff --git a/package/rpi-userland/rpi-userland-makefiles-0001-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch b/package/rpi-userland/rpi-userland-makefiles-0001-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
new file mode 100644
index 0000000..e54d29e
--- /dev/null
+++ b/package/rpi-userland/rpi-userland-makefiles-0001-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
@@ -0,0 +1,26 @@
+From fec2560cfcb8d3398e4f1ccc3de7923365873676 Mon Sep 17 00:00:00 2001
+From: Samuel Martin <s.martin49@gmail.com>
+Date: Sat, 5 Jan 2013 16:04:55 +0100
+Subject: [PATCH] makefiles/cmake/vmcs.cmake: allow to override
+ VMCS_INSTALL_PREFIX
+
+Signed-off-by: Samuel Martin <s.martin49@gmail.com>
+---
+ makefiles/cmake/vmcs.cmake | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/makefiles/cmake/vmcs.cmake b/makefiles/cmake/vmcs.cmake
+index 0f8641b..cc70cca 100644
+--- a/makefiles/cmake/vmcs.cmake
++++ b/makefiles/cmake/vmcs.cmake
+@@ -9,7 +9,7 @@ INCLUDE(CPack)
+ # Where shall we install?
+ if (ANDROID)
+   SET(VMCS_INSTALL_PREFIX "/vendor/brcm/islands" CACHE PATH "Prefix prepended to install directories" FORCE)
+-else()
++elseif(NOT DEFINED VMCS_INSTALL_PREFIX)
+   SET(VMCS_INSTALL_PREFIX "/opt/vc" CACHE PATH "Prefix prepended to install directories" FORCE)
+ endif()
+ 
+-- 
+1.8.1
diff --git a/package/rpi-userland/rpi-userland.mk b/package/rpi-userland/rpi-userland.mk
new file mode 100644
index 0000000..ece37d4
--- /dev/null
+++ b/package/rpi-userland/rpi-userland.mk
@@ -0,0 +1,20 @@
+#############################################################
+#
+# rpi-userland
+#
+#############################################################
+
+RPI_USERLAND_VERSION = 9852ce28826889e50c4d6786b942f51bccccac54
+RPI_USERLAND_SITE = http://github.com/raspberrypi/userland/tarball/master
+RPI_USERLAND_LICENSE = BSD-3c
+RPI_USERLAND_LICENSE_FILE = LICENCE
+RPI_USERLAND_INSTALL_STAGING = YES
+RPI_USERLAND_CONF_OPT = -DVMCS_INSTALL_PREFIX=/usr
+
+define RPI_USERLAND_POST_TARGET_CLEANUP
+    rm -Rf $(TARGET_DIR)/usr/src
+endef
+
+RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP
+
+$(eval $(cmake-package))
-- 
1.7.10.4

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Peter Korsgaard]

>>>>> "Maxime" == Maxime Hadjinlian <maxime.hadjinlian@gmail.com> writes:

 Maxime> Introducing a package to build the userland part of the Raspberry,
 Maxime> needed by anyone who would want to build a rootfs for a RaspberryPi.

Presumably it isn't REALLY needed, right? Only if you want to use the
GPU?

 Maxime> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
 Maxime> ---
 Maxime>  package/Config.in                                  |    1 +
 Maxime>  package/rpi-userland/Config.in                     |   18 +++++
 Maxime>  ...0002-Test-for-the-existence-of-execinfo-h.patch |   69 ++++++++++++++++++++
 Maxime>  ...make-vmcs.cmake-allow-to-override-VMCS_IN.patch |   26 ++++++++
 Maxime>  package/rpi-userland/rpi-userland.mk               |   20 ++++++
 Maxime>  5 files changed, 134 insertions(+)
 Maxime>  create mode 100644 package/rpi-userland/Config.in
 Maxime>  create mode 100644 package/rpi-userland/rpi-userland-0002-Test-for-the-existence-of-execinfo-h.patch
 Maxime>  create mode 100644 package/rpi-userland/rpi-userland-makefiles-0001-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
 Maxime>  create mode 100644 package/rpi-userland/rpi-userland.mk

 Maxime> diff --git a/package/Config.in b/package/Config.in
 Maxime> index 9b50f4b..17205fe 100644
 Maxime> --- a/package/Config.in
 Maxime> +++ b/package/Config.in
 Maxime> @@ -580,6 +580,7 @@ source "package/collectd/Config.in"
 Maxime>  source "package/empty/Config.in"
 Maxime>  source "package/googlefontdirectory/Config.in"
 Maxime>  source "package/mobile-broadband-provider-info/Config.in"
 Maxime> +source "package/rpi-userland/Config.in"

I think 'hardware handling' makes more sense, so I've moved it there
instead.

 Maxime>  source "package/shared-mime-info/Config.in"
 Maxime>  source "package/snowball-init/Config.in"
 Maxime>  source "package/sound-theme-borealis/Config.in"
 Maxime> diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
 Maxime> new file mode 100644
 Maxime> index 0000000..646d74e
 Maxime> --- /dev/null
 Maxime> +++ b/package/rpi-userland/Config.in
 Maxime> @@ -0,0 +1,18 @@
 Maxime> +config BR2_PACKAGE_RPI_USERLAND
 Maxime> +	bool "RaspberryPi userland"

We normally keep the name short and lower case, so I've renamed to
'rpi-userland'.

 Maxime> +	depends on BR2_INSTALL_LIBSTDCPP
 Maxime> +	depends on BR2_LARGEFILE
 Maxime> +	help
 Maxime> +	  Raspberry Pi Userland contains the necessary library to use the
 Maxime> +	  VideoCore driver.
 Maxime> +
 Maxime> +	  Includes source for the ARM side code to interface to: 

Trailing spaces.

 Maxime> +	  EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
 Maxime> +
 Maxime> +	  https://github.com/raspberrypi/userland/
 Maxime> +
 Maxime> +comment "RaspberryPi userland requires a toolchain with C++ support enabled"
 Maxime> +	depends on !BR2_INSTALL_LIBSTDCPP
 Maxime> +
 Maxime> +comment "RaspberryPi userland requires a toolchain with LARGEFILE support"
 Maxime> +	depends on !BR2_LARGEFILE

I've merged these two comments.

Committed with those changes, thanks.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Peter Korsgaard]

>>>>> "Maxime" == Maxime Hadjinlian <maxime.hadjinlian@gmail.com> writes:

 Maxime> +++ b/package/rpi-userland/Config.in
 Maxime> @@ -0,0 +1,18 @@
 Maxime> +config BR2_PACKAGE_RPI_USERLAND
 Maxime> +	bool "RaspberryPi userland"
 Maxime> +	depends on BR2_INSTALL_LIBSTDCPP
 Maxime> +	depends on BR2_LARGEFILE

Ohh, and you forgot the 'depends on BR2_arm' - I've added it.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Maxime Hadjinlian]

On Sun, Jan 6, 2013 at 11:09 PM, Peter Korsgaard <jacmet@uclibc.org> wrote:
>>>>>> "Maxime" == Maxime Hadjinlian <maxime.hadjinlian@gmail.com> writes:
>
>  Maxime> Introducing a package to build the userland part of the Raspberry,
>  Maxime> needed by anyone who would want to build a rootfs for a RaspberryPi.
>
> Presumably it isn't REALLY needed, right? Only if you want to use the
> GPU?
I actually don't know if you could do without it since the rpi only
video output is the HDMI.
I'll have to check about that.
>
>  Maxime> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
>  Maxime> ---
>  Maxime>  package/Config.in                                  |    1 +
>  Maxime>  package/rpi-userland/Config.in                     |   18 +++++
>  Maxime>  ...0002-Test-for-the-existence-of-execinfo-h.patch |   69 ++++++++++++++++++++
>  Maxime>  ...make-vmcs.cmake-allow-to-override-VMCS_IN.patch |   26 ++++++++
>  Maxime>  package/rpi-userland/rpi-userland.mk               |   20 ++++++
>  Maxime>  5 files changed, 134 insertions(+)
>  Maxime>  create mode 100644 package/rpi-userland/Config.in
>  Maxime>  create mode 100644 package/rpi-userland/rpi-userland-0002-Test-for-the-existence-of-execinfo-h.patch
>  Maxime>  create mode 100644 package/rpi-userland/rpi-userland-makefiles-0001-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
>  Maxime>  create mode 100644 package/rpi-userland/rpi-userland.mk
>
>  Maxime> diff --git a/package/Config.in b/package/Config.in
>  Maxime> index 9b50f4b..17205fe 100644
>  Maxime> --- a/package/Config.in
>  Maxime> +++ b/package/Config.in
>  Maxime> @@ -580,6 +580,7 @@ source "package/collectd/Config.in"
>  Maxime>  source "package/empty/Config.in"
>  Maxime>  source "package/googlefontdirectory/Config.in"
>  Maxime>  source "package/mobile-broadband-provider-info/Config.in"
>  Maxime> +source "package/rpi-userland/Config.in"
>
> I think 'hardware handling' makes more sense, so I've moved it there
> instead.
>
>  Maxime>  source "package/shared-mime-info/Config.in"
>  Maxime>  source "package/snowball-init/Config.in"
>  Maxime>  source "package/sound-theme-borealis/Config.in"
>  Maxime> diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
>  Maxime> new file mode 100644
>  Maxime> index 0000000..646d74e
>  Maxime> --- /dev/null
>  Maxime> +++ b/package/rpi-userland/Config.in
>  Maxime> @@ -0,0 +1,18 @@
>  Maxime> +config BR2_PACKAGE_RPI_USERLAND
>  Maxime> +      bool "RaspberryPi userland"
>
> We normally keep the name short and lower case, so I've renamed to
> 'rpi-userland'.
>
>  Maxime> +      depends on BR2_INSTALL_LIBSTDCPP
>  Maxime> +      depends on BR2_LARGEFILE
>  Maxime> +      help
>  Maxime> +        Raspberry Pi Userland contains the necessary library to use the
>  Maxime> +        VideoCore driver.
>  Maxime> +
>  Maxime> +        Includes source for the ARM side code to interface to:
>
> Trailing spaces.
>
>  Maxime> +        EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
>  Maxime> +
>  Maxime> +        https://github.com/raspberrypi/userland/
>  Maxime> +
>  Maxime> +comment "RaspberryPi userland requires a toolchain with C++ support enabled"
>  Maxime> +      depends on !BR2_INSTALL_LIBSTDCPP
>  Maxime> +
>  Maxime> +comment "RaspberryPi userland requires a toolchain with LARGEFILE support"
>  Maxime> +      depends on !BR2_LARGEFILE
>
> I've merged these two comments.
>
> Committed with those changes, thanks.
>
> --
> Bye, Peter Korsgaard

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Maxime Hadjinlian]

2013/1/6 Peter Korsgaard <jacmet@uclibc.org>:
>>>>>> "Maxime" == Maxime Hadjinlian <maxime.hadjinlian@gmail.com> writes:
>
>  Maxime> +++ b/package/rpi-userland/Config.in
>  Maxime> @@ -0,0 +1,18 @@
>  Maxime> +config BR2_PACKAGE_RPI_USERLAND
>  Maxime> +      bool "RaspberryPi userland"
>  Maxime> +      depends on BR2_INSTALL_LIBSTDCPP
>  Maxime> +      depends on BR2_LARGEFILE
>
> Ohh, and you forgot the 'depends on BR2_arm' - I've added it.
Argh.
Thanks for all your fixes
>
> --
> Bye, Peter Korsgaard

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Yann E. MORIN]

Maxime, All,

On Sunday 06 January 2013 Maxime Hadjinlian wrote:
> On Sun, Jan 6, 2013 at 11:09 PM, Peter Korsgaard <jacmet@uclibc.org> wrote:
> >>>>>> "Maxime" == Maxime Hadjinlian <maxime.hadjinlian@gmail.com> writes:
> >
> >  Maxime> Introducing a package to build the userland part of the Raspberry,
> >  Maxime> needed by anyone who would want to build a rootfs for a RaspberryPi.
> >
> > Presumably it isn't REALLY needed, right? Only if you want to use the
> > GPU?
> I actually don't know if you could do without it since the rpi only
> video output is the HDMI.
> I'll have to check about that.

I am running one rpi headless, so I don't need the GPU-related userland
on this rpi.

It is needed only if you plan on doing graphics, so it is not strictly
/required/ per-se.

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Maxime Hadjinlian]

On Sun, Jan 6, 2013 at 11:17 PM, Yann E. MORIN <yann.morin.1998@free.fr> wrote:
> Maxime, All,
>
> On Sunday 06 January 2013 Maxime Hadjinlian wrote:
>> On Sun, Jan 6, 2013 at 11:09 PM, Peter Korsgaard <jacmet@uclibc.org> wrote:
>> >>>>>> "Maxime" == Maxime Hadjinlian <maxime.hadjinlian@gmail.com> writes:
>> >
>> >  Maxime> Introducing a package to build the userland part of the Raspberry,
>> >  Maxime> needed by anyone who would want to build a rootfs for a RaspberryPi.
>> >
>> > Presumably it isn't REALLY needed, right? Only if you want to use the
>> > GPU?
>> I actually don't know if you could do without it since the rpi only
>> video output is the HDMI.
>> I'll have to check about that.
>
> I am running one rpi headless, so I don't need the GPU-related userland
> on this rpi.
>
> It is needed only if you plan on doing graphics, so it is not strictly
> /required/ per-se.
You're totally right.
>
> Regards,
> Yann E. MORIN.
>
> --
> .-----------------.--------------------.------------------.--------------------.
> |  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
> | +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
> '------------------------------^-------^------------------^--------------------'
>

[Buildroot] [PATCH 2/3] rpi-userland: new package

[Floris Bos]

On 01/06/2013 11:13 PM, Maxime Hadjinlian wrote:
>   Maxime> Introducing a package to build the userland part of the Raspberry,
>   Maxime> needed by anyone who would want to build a rootfs for a RaspberryPi.
>
> Presumably it isn't REALLY needed, right? Only if you want to use the
> GPU?
> I actually don't know if you could do without it since the rpi only
> video output is the HDMI.
> I'll have to check about that.

You can do fine without.
Normal unaccelerated framebuffer output does not require those userland 
libraries at all.

Only needed for applications that require GPU accelerated OpenGL ES, 
OpenMAX, OpenVG libraries, or if you want to play with HDMI CEC (using a 
normal TV remote as input device).


Yours sincerely,

Floris Bos

[Buildroot] [PATCH 3/3] rpi-fw: New package

[Arnout Vandecappelle]

On 06/01/13 15:47, Maxime Hadjinlian wrote:
>> >    Floris>  But another question would be if bootloader files really should be
>> >    Floris>  installed under target.
>> >    Floris>  Keep in mind that the Raspberry Pi boot files are normally kept on a
>> >    Floris>  FAT partition seperate from the root file system.
>> >
>> >  Indeed, it probably makes more sense to just put it in IMAGES_DIR
>> >  instead.
> How about putting them all in a rpi-firmware folder inside IMAGES_DIR
> ? I don't want to just throw them in this folder, it would be a pain
> afterwards since they all go in the same place.

  I think typically everything in the images directory goes into the boot 
partition, except the rootfs.* (exception to the exception: rootfs.cpio*, 
unless it's an initramfs)

  I have thought about creating a boot/ subdirectory in the images 
directory that collects everything that is supposed to go to the boot 
partition. But I'm afraid that there is no generic way to decide what has 
to go to the boot partition. For instance, if you generate a U-Boot for 
Flash but boot from SD card, you would have only kernel and device tree 
in the boot partition. In addition, you often want to add some additional 
things to the boot partition.

  Therefore I think that what we have now is quite OK. You can easily 
wrap the build in a script that copies things to the right place.

  Regards,
  Arnout


-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F