* [Buildroot] [PATCH] libiqrf: Bump to v0.1.2 + update build system. @ 2013-07-03 20:51 Marek Belisko 2013-07-03 21:04 ` Yann E. MORIN 2013-07-28 14:05 ` Thomas Petazzoni 0 siblings, 2 replies; 5+ messages in thread From: Marek Belisko @ 2013-07-03 20:51 UTC (permalink / raw) To: buildroot v0.1.2 update build system from autotools to cmake. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> --- package/libiqrf/libiqrf.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libiqrf/libiqrf.mk b/package/libiqrf/libiqrf.mk index f2d5b4c..df4bb42 100644 --- a/package/libiqrf/libiqrf.mk +++ b/package/libiqrf/libiqrf.mk @@ -4,11 +4,11 @@ # ################################################################################ -LIBIQRF_VERSION = v0.1.0 +LIBIQRF_VERSION = v0.1.2 LIBIQRF_SITE = http://github.com/nandra/libiqrf/tarball/$(LIBIQRF_VERSION) LIBIQRF_INSTALL_STAGING = YES LIBIQRF_DEPENDENCIES = libusb -$(eval $(autotools-package)) +$(eval $(cmake-package)) -- 1.8.1.2 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] libiqrf: Bump to v0.1.2 + update build system. 2013-07-03 20:51 [Buildroot] [PATCH] libiqrf: Bump to v0.1.2 + update build system Marek Belisko @ 2013-07-03 21:04 ` Yann E. MORIN 2013-07-04 4:51 ` Belisko Marek 2013-07-28 14:05 ` Thomas Petazzoni 1 sibling, 1 reply; 5+ messages in thread From: Yann E. MORIN @ 2013-07-03 21:04 UTC (permalink / raw) To: buildroot Marek, All, On 2013-07-03 22:51 +0200, Marek Belisko spake thusly: > v0.1.2 update build system from autotools to cmake. Is it mandatory to switch to cmake when upgrading? If not, then please split this in two: one to upgrade, one to switch. If possible, I'd prefer we stick to using autotools if it is still supported (and maintained) by libiqrf. I'm wary of the fuss around cmake (but agreed, that's a personal taste). Every now and then, I pester at cmake usage, since I don't really want to pay the price for Yet-Another-Build-System, and the very few packages that I need and use cmake, do compile in an aggregated time much smaller than it takes to build cmake itself. So, my personal taste would be to favour autotools against cmake where/if possible, please. ;-) Note: of course, if autotools is no longer supported by libiqrf, then the switch is mandatory, but if so, state it explicitly in the commit message. > Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> > --- > package/libiqrf/libiqrf.mk | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/libiqrf/libiqrf.mk b/package/libiqrf/libiqrf.mk > index f2d5b4c..df4bb42 100644 > --- a/package/libiqrf/libiqrf.mk > +++ b/package/libiqrf/libiqrf.mk > @@ -4,11 +4,11 @@ > # > ################################################################################ > > -LIBIQRF_VERSION = v0.1.0 > +LIBIQRF_VERSION = v0.1.2 > LIBIQRF_SITE = http://github.com/nandra/libiqrf/tarball/$(LIBIQRF_VERSION) > LIBIQRF_INSTALL_STAGING = YES > > LIBIQRF_DEPENDENCIES = libusb > > -$(eval $(autotools-package)) > +$(eval $(cmake-package)) Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' ^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] libiqrf: Bump to v0.1.2 + update build system. 2013-07-03 21:04 ` Yann E. MORIN @ 2013-07-04 4:51 ` Belisko Marek 0 siblings, 0 replies; 5+ messages in thread From: Belisko Marek @ 2013-07-04 4:51 UTC (permalink / raw) To: buildroot Hi Yann, On Wed, Jul 3, 2013 at 11:04 PM, Yann E. MORIN <yann.morin.1998@free.fr> wrote: > Marek, All, > > On 2013-07-03 22:51 +0200, Marek Belisko spake thusly: >> v0.1.2 update build system from autotools to cmake. > > Is it mandatory to switch to cmake when upgrading? > If not, then please split this in two: one to upgrade, one to switch. > > If possible, I'd prefer we stick to using autotools if it is still > supported (and maintained) by libiqrf. I'm wary of the fuss around > cmake (but agreed, that's a personal taste). Every now and then, I > pester at cmake usage, since I don't really want to pay the price for > Yet-Another-Build-System, and the very few packages that I need and > use cmake, do compile in an aggregated time much smaller than it takes > to build cmake itself. > > So, my personal taste would be to favour autotools against cmake > where/if possible, please. ;-) > > Note: of course, if autotools is no longer supported by libiqrf, then > the switch is mandatory, but if so, state it explicitly in the commit > message. Right, autotools was replaced by cmake in version v0.1.2. > >> Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> >> --- >> package/libiqrf/libiqrf.mk | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/package/libiqrf/libiqrf.mk b/package/libiqrf/libiqrf.mk >> index f2d5b4c..df4bb42 100644 >> --- a/package/libiqrf/libiqrf.mk >> +++ b/package/libiqrf/libiqrf.mk >> @@ -4,11 +4,11 @@ >> # >> ################################################################################ >> >> -LIBIQRF_VERSION = v0.1.0 >> +LIBIQRF_VERSION = v0.1.2 >> LIBIQRF_SITE = http://github.com/nandra/libiqrf/tarball/$(LIBIQRF_VERSION) >> LIBIQRF_INSTALL_STAGING = YES >> >> LIBIQRF_DEPENDENCIES = libusb >> >> -$(eval $(autotools-package)) >> +$(eval $(cmake-package)) > > Regards, > Yann E. MORIN. > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' Marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com ^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] libiqrf: Bump to v0.1.2 + update build system. 2013-07-03 20:51 [Buildroot] [PATCH] libiqrf: Bump to v0.1.2 + update build system Marek Belisko 2013-07-03 21:04 ` Yann E. MORIN @ 2013-07-28 14:05 ` Thomas Petazzoni 2013-07-28 19:38 ` Belisko Marek 1 sibling, 1 reply; 5+ messages in thread From: Thomas Petazzoni @ 2013-07-28 14:05 UTC (permalink / raw) To: buildroot Dear Marek Belisko, On Wed, 3 Jul 2013 22:51:20 +0200, Marek Belisko wrote: > v0.1.2 update build system from autotools to cmake. Committed, thanks. I had to add a simple patch to the CMakeLists.txt to avoid CMake needlessly checking for a C++ compiler. It would be good if this patch could be upstreamed. Thanks, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] libiqrf: Bump to v0.1.2 + update build system. 2013-07-28 14:05 ` Thomas Petazzoni @ 2013-07-28 19:38 ` Belisko Marek 0 siblings, 0 replies; 5+ messages in thread From: Belisko Marek @ 2013-07-28 19:38 UTC (permalink / raw) To: buildroot Hi Thomas, On Sun, Jul 28, 2013 at 4:05 PM, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote: > Dear Marek Belisko, > > On Wed, 3 Jul 2013 22:51:20 +0200, Marek Belisko wrote: >> v0.1.2 update build system from autotools to cmake. > > Committed, thanks. I had to add a simple patch to the CMakeLists.txt to > avoid CMake needlessly checking for a C++ compiler. It would be good if > this patch could be upstreamed. Thanks. Sure I'll take your patch and add it upstream. > > Thanks, > > Thomas > -- > Thomas Petazzoni, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-07-28 19:38 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-07-03 20:51 [Buildroot] [PATCH] libiqrf: Bump to v0.1.2 + update build system Marek Belisko 2013-07-03 21:04 ` Yann E. MORIN 2013-07-04 4:51 ` Belisko Marek 2013-07-28 14:05 ` Thomas Petazzoni 2013-07-28 19:38 ` Belisko Marek
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox