* [Buildroot] [PATCH 2/4] barebox: fix coding style
2014-03-07 9:31 [Buildroot] [PATCH 0/4] Misc patches Fabio Porcedda
2014-03-07 9:31 ` [Buildroot] [PATCH 1/4] barebox: bump to version 2014.03.0 Fabio Porcedda
@ 2014-03-07 9:31 ` Fabio Porcedda
2014-03-27 22:31 ` Peter Korsgaard
2014-03-07 9:31 ` [Buildroot] [PATCH 3/4] Remove "dirs" dependencies Fabio Porcedda
2014-03-07 9:31 ` [Buildroot] [PATCH 4/4] Makefile: fix coding style Fabio Porcedda
3 siblings, 1 reply; 8+ messages in thread
From: Fabio Porcedda @ 2014-03-07 9:31 UTC (permalink / raw)
To: buildroot
As stated in the buildroot user manual add just a single space before
and after a '=' sign.
Break long lines.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
---
boot/barebox/barebox.mk | 32 +++++++++++++++++++-------------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/boot/barebox/barebox.mk b/boot/barebox/barebox.mk
index 9324c25..f57d297 100644
--- a/boot/barebox/barebox.mk
+++ b/boot/barebox/barebox.mk
@@ -4,15 +4,15 @@
#
################################################################################
-BAREBOX_VERSION = $(call qstrip,$(BR2_TARGET_BAREBOX_VERSION))
+BAREBOX_VERSION = $(call qstrip,$(BR2_TARGET_BAREBOX_VERSION))
ifeq ($(BAREBOX_VERSION),custom)
# Handle custom Barebox tarballs as specified by the configuration
BAREBOX_TARBALL = $(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_TARBALL_LOCATION))
-BAREBOX_SITE = $(patsubst %/,%,$(dir $(BAREBOX_TARBALL)))
-BAREBOX_SOURCE = $(notdir $(BAREBOX_TARBALL))
+BAREBOX_SITE = $(patsubst %/,%,$(dir $(BAREBOX_TARBALL)))
+BAREBOX_SOURCE = $(notdir $(BAREBOX_TARBALL))
else ifeq ($(BR2_TARGET_BAREBOX_CUSTOM_GIT),y)
-BAREBOX_SITE = $(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_GIT_REPO_URL))
+BAREBOX_SITE = $(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_GIT_REPO_URL))
BAREBOX_SITE_METHOD = git
else
# Handle stable official Barebox versions
@@ -26,7 +26,8 @@ BAREBOX_LICENSE_FILES = COPYING
ifneq ($(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR)),)
define BAREBOX_APPLY_CUSTOM_PATCHES
- support/scripts/apply-patches.sh $(@D) $(BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR) \
+ support/scripts/apply-patches.sh $(@D) \
+ $(BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR) \
barebox-$(BAREBOX_VERSION)-\*.patch
endef
@@ -39,25 +40,29 @@ BAREBOX_INSTALL_TARGET = NO
endif
ifeq ($(KERNEL_ARCH),i386)
-BAREBOX_ARCH=x86
+BAREBOX_ARCH = x86
else ifeq ($(KERNEL_ARCH),powerpc)
-BAREBOX_ARCH=ppc
+BAREBOX_ARCH = ppc
else
-BAREBOX_ARCH=$(KERNEL_ARCH)
+BAREBOX_ARCH = $(KERNEL_ARCH)
endif
-BAREBOX_MAKE_FLAGS = ARCH=$(BAREBOX_ARCH) CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)"
+BAREBOX_MAKE_FLAGS = ARCH=$(BAREBOX_ARCH) CROSS_COMPILE="$(CCACHE) \
+ $(TARGET_CROSS)"
ifeq ($(BR2_TARGET_BAREBOX_USE_DEFCONFIG),y)
-BAREBOX_SOURCE_CONFIG = $(@D)/arch/$(BAREBOX_ARCH)/configs/$(call qstrip,$(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))_defconfig
+BAREBOX_SOURCE_CONFIG = $(@D)/arch/$(BAREBOX_ARCH)/configs/$(call qstrip,\
+ $(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))_defconfig
else ifeq ($(BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG),y)
BAREBOX_SOURCE_CONFIG = $(BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE)
endif
define BAREBOX_CONFIGURE_CMDS
- cp $(BAREBOX_SOURCE_CONFIG) $(@D)/arch/$(BAREBOX_ARCH)/configs/buildroot_defconfig
- $(TARGET_MAKE_ENV) $(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D) buildroot_defconfig
+ cp $(BAREBOX_SOURCE_CONFIG) \
+ $(@D)/arch/$(BAREBOX_ARCH)/configs/buildroot_defconfig
+ $(TARGET_MAKE_ENV) $(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D) \
+ buildroot_defconfig
endef
ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
@@ -68,7 +73,8 @@ endef
endif
ifeq ($(BR2_TARGET_BAREBOX_CUSTOM_ENV),y)
-BAREBOX_ENV_NAME = $(notdir $(call qstrip, $(BR2_TARGET_BAREBOX_CUSTOM_ENV_PATH)))
+BAREBOX_ENV_NAME = $(notdir $(call qstrip,\
+ $(BR2_TARGET_BAREBOX_CUSTOM_ENV_PATH)))
define BAREBOX_BUILD_CUSTOM_ENV
$(@D)/scripts/bareboxenv -s \
$(call qstrip, $(BR2_TARGET_BAREBOX_CUSTOM_ENV_PATH)) \
--
1.8.3.2
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 4/4] Makefile: fix coding style
2014-03-07 9:31 [Buildroot] [PATCH 0/4] Misc patches Fabio Porcedda
` (2 preceding siblings ...)
2014-03-07 9:31 ` [Buildroot] [PATCH 3/4] Remove "dirs" dependencies Fabio Porcedda
@ 2014-03-07 9:31 ` Fabio Porcedda
3 siblings, 0 replies; 8+ messages in thread
From: Fabio Porcedda @ 2014-03-07 9:31 UTC (permalink / raw)
To: buildroot
As stated in the buildroot user manual add just a single space before
and after a '=' sign.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
---
Makefile | 188 +++++++++++++++++++++++++++++++--------------------------------
1 file changed, 94 insertions(+), 94 deletions(-)
diff --git a/Makefile b/Makefile
index 0e7035b..b865d9e 100644
--- a/Makefile
+++ b/Makefile
@@ -25,10 +25,10 @@
#--------------------------------------------------------------
# Set and export the version string
-export BR2_VERSION:=2014.05-git
+export BR2_VERSION := 2014.05-git
# Check for minimal make version (note: this check will break at make 10.x)
-MIN_MAKE_VERSION=3.81
+MIN_MAKE_VERSION = 3.81
ifneq ($(firstword $(sort $(MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
$(error You have make '$(MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
endif
@@ -60,33 +60,33 @@ export HOSTARCH := $(shell uname -m | \
.NOTPARALLEL:
# absolute path
-TOPDIR:=$(shell pwd)
-CONFIG_CONFIG_IN=Config.in
-CONFIG=support/kconfig
-DATE:=$(shell date +%Y%m%d)
+TOPDIR := $(shell pwd)
+CONFIG_CONFIG_IN = Config.in
+CONFIG = support/kconfig
+DATE := $(shell date +%Y%m%d)
# Compute the full local version string so packages can use it as-is
# Need to export it, so it can be got from environment in children (eg. mconf)
-export BR2_VERSION_FULL:=$(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
+export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
-noconfig_targets:=menuconfig nconfig gconfig xconfig config oldconfig randconfig \
+noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
defconfig %_defconfig allyesconfig allnoconfig silentoldconfig release \
randpackageconfig allyespackageconfig allnopackageconfig \
source-check print-version olddefconfig
# Strip quotes and then whitespaces
-qstrip=$(strip $(subst ",,$(1)))
+qstrip = $(strip $(subst ",,$(1)))
#"))
# Variables for use in Make constructs
-comma:=,
-empty:=
-space:=$(empty) $(empty)
+comma := ,
+empty :=
+space := $(empty) $(empty)
ifneq ("$(origin O)", "command line")
-O:=output
-CONFIG_DIR:=$(TOPDIR)
-NEED_WRAPPER=
+O := output
+CONFIG_DIR := $(TOPDIR)
+NEED_WRAPPER =
else
# other packages might also support Linux-style out of tree builds
# with the O=<dir> syntax (E.G. Busybox does). As make automatically
@@ -98,18 +98,18 @@ MAKEOVERRIDES =
# of the origin function (command line -> environment).
# Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
# To really make O go away, we have to override it.
-override O:=$(O)
-CONFIG_DIR:=$(O)
+override O := $(O)
+CONFIG_DIR := $(O)
# we need to pass O= everywhere we call back into the toplevel makefile
EXTRAMAKEARGS = O=$(O)
-NEED_WRAPPER=y
+NEED_WRAPPER = y
endif
# bash prints the name of the directory on 'cd <dir>' if CDPATH is
# set, so unset it here to not cause problems. Notice that the export
# line doesn't affect the environment of $(shell ..) calls, so
# explictly throw away any output from 'cd' here.
-export CDPATH:=
+export CDPATH :=
BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
$(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
@@ -151,27 +151,27 @@ endif
# Avoids doing the $(or...) everytime
_BR2_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
-BUILD_DIR:=$(BASE_DIR)/build
-STAMP_DIR:=$(BASE_DIR)/stamps
-BINARIES_DIR:=$(BASE_DIR)/images
-TARGET_DIR:=$(BASE_DIR)/target
+BUILD_DIR := $(BASE_DIR)/build
+STAMP_DIR := $(BASE_DIR)/stamps
+BINARIES_DIR := $(BASE_DIR)/images
+TARGET_DIR := $(BASE_DIR)/target
# initial definition so that 'make clean' works for most users, even without
# .config. HOST_DIR will be overwritten later when .config is included.
-HOST_DIR:=$(BASE_DIR)/host
-
-LEGAL_INFO_DIR=$(BASE_DIR)/legal-info
-REDIST_SOURCES_DIR_TARGET=$(LEGAL_INFO_DIR)/sources
-REDIST_SOURCES_DIR_HOST=$(LEGAL_INFO_DIR)/host-sources
-LICENSE_FILES_DIR_TARGET=$(LEGAL_INFO_DIR)/licenses
-LICENSE_FILES_DIR_HOST=$(LEGAL_INFO_DIR)/host-licenses
-LEGAL_MANIFEST_CSV_TARGET=$(LEGAL_INFO_DIR)/manifest.csv
-LEGAL_MANIFEST_CSV_HOST=$(LEGAL_INFO_DIR)/host-manifest.csv
-LEGAL_LICENSES_TXT_TARGET=$(LEGAL_INFO_DIR)/licenses.txt
-LEGAL_LICENSES_TXT_HOST=$(LEGAL_INFO_DIR)/host-licenses.txt
-LEGAL_WARNINGS=$(LEGAL_INFO_DIR)/.warnings
-LEGAL_REPORT=$(LEGAL_INFO_DIR)/README
-
-BR2_CONFIG=$(CONFIG_DIR)/.config
+HOST_DIR := $(BASE_DIR)/host
+
+LEGAL_INFO_DIR = $(BASE_DIR)/legal-info
+REDIST_SOURCES_DIR_TARGET = $(LEGAL_INFO_DIR)/sources
+REDIST_SOURCES_DIR_HOST = $(LEGAL_INFO_DIR)/host-sources
+LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
+LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
+LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
+LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
+LEGAL_LICENSES_TXT_TARGET = $(LEGAL_INFO_DIR)/licenses.txt
+LEGAL_LICENSES_TXT_HOST = $(LEGAL_INFO_DIR)/host-licenses.txt
+LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
+LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
+
+BR2_CONFIG = $(CONFIG_DIR)/.config
# Pull in the user's configuration file
ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
@@ -182,22 +182,22 @@ endif
# Use 'make V=1' to see the full commands
ifdef V
ifeq ("$(origin V)", "command line")
- KBUILD_VERBOSE=$(V)
+ KBUILD_VERBOSE = $(V)
endif
endif
ifndef KBUILD_VERBOSE
- KBUILD_VERBOSE=0
+ KBUILD_VERBOSE = 0
endif
ifeq ($(KBUILD_VERBOSE),1)
- quiet=
- Q=
+ quiet =
+ Q =
ifndef VERBOSE
- VERBOSE=1
+ VERBOSE = 1
endif
else
- quiet=quiet_
- Q=@
+ quiet = quiet_
+ Q = @
endif
# we want bash as shell
@@ -206,56 +206,56 @@ SHELL:=$(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else echo sh; fi; fi)
# kconfig uses CONFIG_SHELL
-CONFIG_SHELL:=$(SHELL)
+CONFIG_SHELL := $(SHELL)
export SHELL CONFIG_SHELL quiet Q KBUILD_VERBOSE VERBOSE
ifndef HOSTAR
-HOSTAR:=ar
+HOSTAR := ar
endif
ifndef HOSTAS
HOSTAS:=as
endif
ifndef HOSTCC
-HOSTCC:=gcc
-HOSTCC:=$(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
+HOSTCC := gcc
+HOSTCC := $(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
endif
HOSTCC_NOCCACHE:=$(HOSTCC)
ifndef HOSTCXX
-HOSTCXX:=g++
-HOSTCXX:=$(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
+HOSTCXX := g++
+HOSTCXX := $(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
endif
-HOSTCXX_NOCCACHE:=$(HOSTCXX)
+HOSTCXX_NOCCACHE := $(HOSTCXX)
ifndef HOSTFC
-HOSTFC:=gfortran
+HOSTFC := gfortran
endif
ifndef HOSTCPP
HOSTCPP:=cpp
endif
ifndef HOSTLD
-HOSTLD:=ld
+HOSTLD := ld
endif
ifndef HOSTLN
-HOSTLN:=ln
+HOSTLN := ln
endif
ifndef HOSTNM
-HOSTNM:=nm
+HOSTNM := nm
endif
ifndef HOSTOBJCOPY
-HOSTOBJCOPY:=objcopy
+HOSTOBJCOPY := objcopy
endif
ifndef HOSTRANLIB
-HOSTRANLIB:=ranlib
-endif
-HOSTAR:=$(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
-HOSTAS:=$(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
-HOSTFC:=$(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
-HOSTCPP:=$(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
-HOSTLD:=$(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
-HOSTLN:=$(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
-HOSTNM:=$(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
-HOSTOBJCOPY:=$(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
-HOSTRANLIB:=$(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
+HOSTRANLIB := ranlib
+endif
+HOSTAR := $(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
+HOSTAS := $(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
+HOSTFC := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
+HOSTCPP := $(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
+HOSTLD := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
+HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
+HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
+HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
+HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTFC HOSTLD
export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
@@ -292,7 +292,7 @@ unexport CONFIG_SITE
unexport QMAKESPEC
unexport TERMINFO
-GNU_HOST_NAME:=$(shell support/gnuconfig/config.guess)
+GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
################################################################################
#
@@ -301,15 +301,15 @@ GNU_HOST_NAME:=$(shell support/gnuconfig/config.guess)
#
################################################################################
-TARGETS:= toolchain
+TARGETS := toolchain
# silent mode requested?
-QUIET:=$(if $(findstring s,$(MAKEFLAGS)),-q)
+QUIET := $(if $(findstring s,$(MAKEFLAGS)),-q)
# Strip off the annoying quoting
-ARCH:=$(call qstrip,$(BR2_ARCH))
+ARCH := $(call qstrip,$(BR2_ARCH))
-KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
+KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
-e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arcle/arc/ \
-e s/arceb/arc/ \
@@ -321,28 +321,28 @@ KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-e s/sh.*/sh/)
-ZCAT:=$(call qstrip,$(BR2_ZCAT))
-BZCAT:=$(call qstrip,$(BR2_BZCAT))
-XZCAT:=$(call qstrip,$(BR2_XZCAT))
-TAR_OPTIONS=$(call qstrip,$(BR2_TAR_OPTIONS)) -xf
+ZCAT := $(call qstrip,$(BR2_ZCAT))
+BZCAT := $(call qstrip,$(BR2_BZCAT))
+XZCAT := $(call qstrip,$(BR2_XZCAT))
+TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
# packages compiled for the host go here
-HOST_DIR:=$(call qstrip,$(BR2_HOST_DIR))
+HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
# locales to generate
-GENERATE_LOCALE=$(call qstrip,$(BR2_GENERATE_LOCALE))
+GENERATE_LOCALE = $(call qstrip,$(BR2_GENERATE_LOCALE))
-TARGET_SKELETON=$(TOPDIR)/system/skeleton
+TARGET_SKELETON = $(TOPDIR)/system/skeleton
# Location of a file giving a big fat warning that output/target
# should not be used as the root filesystem.
-TARGET_DIR_WARNING_FILE=$(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
+TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
ifeq ($(BR2_CCACHE),y)
-CCACHE:=$(HOST_DIR)/usr/bin/ccache
+CCACHE := $(HOST_DIR)/usr/bin/ccache
BR_CACHE_DIR = $(call qstrip,$(BR2_CCACHE_DIR))
export BR_CACHE_DIR
-HOSTCC := $(CCACHE) $(HOSTCC)
+HOSTCC := $(CCACHE) $(HOSTCC)
HOSTCXX := $(CCACHE) $(HOSTCXX)
endif
@@ -395,23 +395,23 @@ include system/system.mk
include $(BR2_EXTERNAL)/external.mk
ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
-TARGETS+=target-purgelocales
+TARGETS += target-purgelocales
endif
ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
ifneq ($(GENERATE_LOCALE),)
-TARGETS+=target-generatelocales
+TARGETS += target-generatelocales
endif
endif
ifeq ($(BR2_ECLIPSE_REGISTER),y)
-TARGETS+=toolchain-eclipse-register
+TARGETS += toolchain-eclipse-register
endif
include fs/common.mk
-TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS))
-TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
+TARGETS_SOURCE := $(patsubst %,%-source,$(TARGETS))
+TARGETS_DIRCLEAN := $(patsubst %,%-dirclean,$(TARGETS))
# host-* dependencies have to be handled specially, as those aren't
# visible in Kconfig and hence not added to a variable like TARGETS.
@@ -431,7 +431,7 @@ HOST_DEPS = $(sort $(foreach dep,\
$($(dep))))
HOST_SOURCE += $(addsuffix -source,$(sort $(TARGETS_HOST_DEPS) $(HOST_DEPS)))
-TARGETS_LEGAL_INFO:=$(patsubst %,%-legal-info,\
+TARGETS_LEGAL_INFO := $(patsubst %,%-legal-info,\
$(TARGETS) $(TARGETS_HOST_DEPS) $(HOST_DEPS))))
dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
@@ -484,7 +484,7 @@ $(STAGING_DIR):
@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y)
-TARGET_SKELETON=$(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
+TARGET_SKELETON = $(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
endif
RSYNC_VCS_EXCLUSIONS = \
@@ -578,8 +578,8 @@ endif
$(USER_HOOKS_EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
-LOCALE_WHITELIST=$(BUILD_DIR)/locales.nopurge
-LOCALE_NOPURGE=$(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
+LOCALE_WHITELIST = $(BUILD_DIR)/locales.nopurge
+LOCALE_NOPURGE = $(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
target-purgelocales:
rm -f $(LOCALE_WHITELIST)
@@ -683,7 +683,7 @@ endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
# configuration
# ---------------------------------------------------------------------------
-HOSTCFLAGS=$(CFLAGS_FOR_BUILD)
+HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
export HOSTCFLAGS
$(BUILD_DIR)/buildroot-config/%onf:
@@ -912,7 +912,7 @@ endif
@echo 'See docs/README, or generate the Buildroot manual for further details'
@echo
-release: OUT=buildroot-$(BR2_VERSION)
+release: OUT = buildroot-$(BR2_VERSION)
# Create release tarballs. We need to fiddle a bit to add the generated
# documentation to the git output
--
1.8.3.2
^ permalink raw reply related [flat|nested] 8+ messages in thread