* [Buildroot] [autobuild.buildroot.net] Build results for 2014-04-18
@ 2014-04-19 6:30 Thomas Petazzoni
2014-04-19 7:08 ` [Buildroot] Analysis of build " Thomas Petazzoni
0 siblings, 1 reply; 11+ messages in thread
From: Thomas Petazzoni @ 2014-04-19 6:30 UTC (permalink / raw)
To: buildroot
Build statistics for 2014-04-18
===============================
success : 60
failures : 22
timeouts : 2
TOTAL : 84
Classification of failures by reason
====================================
host-nodejs-0.10.12 | 5
mesa3d-10.0.4 | 2
lttng-tools-2.4.0 | 2
python-2.7.6 | 2
nmap-6.40 | 2
samba4-4.1.6 | 1
jack2-37976441044d69b91d61d... | 1
util-linux-2.24.1 | 1
libpfm4-4.3.0 | 1
minidlna-1.1.2 | 1
compiling old_th | 1
gst1-plugins-bad-1.2.3 | 1
lttng-libust-2.4.0 | 1
squashfs-4.2 | 1
gst-ffmpeg-0.10.13 | 1
if /home/test/test/2/output... | 1
Detail of failures
===================
i686 | compiling old_th | TIM | http://autobuild.buildroot.net/results/41a94e8fae8667d19842338bb8f909cae70642ab/
x86_64 | gst-ffmpeg-0.10.13 | NOK | http://autobuild.buildroot.net/results/9d252b26819e57f7c90a1b65c93da9fbf0afb9d5/
arm | gst1-plugins-bad-1.2.3 | NOK | http://autobuild.buildroot.net/results/d650fd7afe3e433bdccf7f5020dff22b23115e18/
i686 | host-nodejs-0.10.12 | NOK | http://autobuild.buildroot.net/results/e513f44e2e673d6a87cdadaba1f85c6181c269f2/
arm | host-nodejs-0.10.12 | NOK | http://autobuild.buildroot.net/results/a219031dcf19b9eedc05938f827f26f2f476b74d/
arm | host-nodejs-0.10.12 | NOK | http://autobuild.buildroot.net/results/bdc34ef8a3e4bb749fe9b77dad1c513c29dde2d8/
arm | host-nodejs-0.10.12 | NOK | http://autobuild.buildroot.net/results/0dbb093c89b3bdc778d4a909db851647d61e6b5b/
arm | host-nodejs-0.10.12 | NOK | http://autobuild.buildroot.net/results/bc8adbd69369c6cccdc0de918a79eed0f7a381c8/
microblazeel | if /home/test/test/2/output... | TIM | http://autobuild.buildroot.net/results/30df2bdfc563c3c4c7207f35da0f107b529f671d/
arm | jack2-37976441044d69b91d61d... | NOK | http://autobuild.buildroot.net/results/bfb7595f9468ebc6820acc13f9e99619185fa400/
arc | libpfm4-4.3.0 | NOK | http://autobuild.buildroot.net/results/56630d23dc508131883491119cc2adce2e221324/
arm | lttng-libust-2.4.0 | NOK | http://autobuild.buildroot.net/results/a6f5550cc63260126cb66a954af60f1633b97faf/
arm | lttng-tools-2.4.0 | NOK | http://autobuild.buildroot.net/results/64069f179545ec48e649ca2aae58941798070520/
arm | lttng-tools-2.4.0 | NOK | http://autobuild.buildroot.net/results/4a200729f490a38d1170d5b9f5b125500638cba7/
xtensa | mesa3d-10.0.4 | NOK | http://autobuild.buildroot.net/results/66a9d2c664e0a9b2b0c51b998c72c2ceda90ff9b/
i686 | mesa3d-10.0.4 | NOK | http://autobuild.buildroot.net/results/61c1c566dc0e829cb663ca30b1fd6cf9cc6cd931/
nios2 | minidlna-1.1.2 | NOK | http://autobuild.buildroot.net/results/1948b8998a8795436990178b6691a690327c67aa/
sh4 | nmap-6.40 | NOK | http://autobuild.buildroot.net/results/34d3e029f8cdefb0d1200fd45149fba256eea907/
arm | nmap-6.40 | NOK | http://autobuild.buildroot.net/results/50f9580b6aa5bbf7dea9c8a597b12cdf67cf897d/
arm | python-2.7.6 | NOK | http://autobuild.buildroot.net/results/81096c8736da5e0417f96a384a4967a1375f688a/
avr32 | python-2.7.6 | NOK | http://autobuild.buildroot.net/results/e307f53b1ca8b385701e745138bad728e62d1017/
x86_64 | samba4-4.1.6 | NOK | http://autobuild.buildroot.net/results/a268755b6e5b1c7cdb40c6b96a561347125f7ff8/
bfin | squashfs-4.2 | NOK | http://autobuild.buildroot.net/results/2738934fc23219a33fe1e07b3213b4e10266fc79/
avr32 | util-linux-2.24.1 | NOK | http://autobuild.buildroot.net/results/debb2a80fe82376d3de059c487d45adc26d41d1e/
--
http://autobuild.buildroot.net
^ permalink raw reply [flat|nested] 11+ messages in thread* [Buildroot] Analysis of build results for 2014-04-18 2014-04-19 6:30 [Buildroot] [autobuild.buildroot.net] Build results for 2014-04-18 Thomas Petazzoni @ 2014-04-19 7:08 ` Thomas Petazzoni 2014-04-19 8:43 ` Romain Naour ` (2 more replies) 0 siblings, 3 replies; 11+ messages in thread From: Thomas Petazzoni @ 2014-04-19 7:08 UTC (permalink / raw) To: buildroot Hello, On Sat, 19 Apr 2014 08:30:09 +0200 (CEST), Thomas Petazzoni wrote: > success : 60 > failures : 22 Much better than yesterday. Analysis below. > i686 | compiling old_th | TIM | http://autobuild.buildroot.net/results/41a94e8fae8667d19842338bb8f909cae70642ab/ We're getting more and more of these. We need to analyze the build time graph, and see if those 4+ hours long build times are expected or not. If they are, I will have to increase the timeout on the server. > x86_64 | gst-ffmpeg-0.10.13 | NOK | http://autobuild.buildroot.net/results/9d252b26819e57f7c90a1b65c93da9fbf0afb9d5/ -fPIC problem /home/test/test/1/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-unknown-linux-uclibc/4.6.3/../../../../x86_64-unknown-linux-uclibc/bin/ld: ../../gst-libs/ext/libav/libavcodec/libavcodec.a(lpc_mmx.o): relocation R_X86_64_PC32 against symbol `ff_pd_1' can not be used when making a shared object; recompile with -fPIC > arm | gst1-plugins-bad-1.2.3 | NOK | http://autobuild.buildroot.net/results/d650fd7afe3e433bdccf7f5020dff22b23115e18/ OpenCV problem. Samuel, can you have a look? It appears almost every day. CXX libgstopencv_la-motioncells_wrapper.lo gstdisparity.cpp:124:39: fatal error: opencv2/contrib/contrib.hpp: No such file or directory compilation terminated. make[4]: *** [libgstopencv_la-gstdisparity.lo] Error 1 > i686 | host-nodejs-0.10.12 | NOK | http://autobuild.buildroot.net/results/e513f44e2e673d6a87cdadaba1f85c6181c269f2/ > arm | host-nodejs-0.10.12 | NOK | http://autobuild.buildroot.net/results/a219031dcf19b9eedc05938f827f26f2f476b74d/ > arm | host-nodejs-0.10.12 | NOK | http://autobuild.buildroot.net/results/bdc34ef8a3e4bb749fe9b77dad1c513c29dde2d8/ > arm | host-nodejs-0.10.12 | NOK | http://autobuild.buildroot.net/results/0dbb093c89b3bdc778d4a909db851647d61e6b5b/ > arm | host-nodejs-0.10.12 | NOK | http://autobuild.buildroot.net/results/bc8adbd69369c6cccdc0de918a79eed0f7a381c8/ Some more host-nodejs build problem, but Samuel was not able to reproduce them. I guess I need to run a build on the autobuilder server to investigate more what's going on. > microblazeel | if /home/test/test/2/output... | TIM | http://autobuild.buildroot.net/results/30df2bdfc563c3c4c7207f35da0f107b529f671d/ Timeout to be investigated. Someone willing to look at the build time data? > arm | jack2-37976441044d69b91d61d... | NOK | http://autobuild.buildroot.net/results/bfb7595f9468ebc6820acc13f9e99619185fa400/ Python syntax issue? > arc | libpfm4-4.3.0 | NOK | http://autobuild.buildroot.net/results/56630d23dc508131883491119cc2adce2e221324/ -Werror is probably not a good idea. task.c: In function 'read_groups': task.c:110:5: error: format '%zd' expects argument of type 'signed size_t', but argument 4 has type 'ssize_t' [-Werror=format=] evt, new_sz, ret); ^ cc1: all warnings being treated as errors > arm | lttng-libust-2.4.0 | NOK | http://autobuild.buildroot.net/results/a6f5550cc63260126cb66a954af60f1633b97faf/ checking host system alignment requirements... checking for a Python interpreter with version >= 2.7... none configure: error: no suitable Python interpreter found make: *** [/home/test/test/1/output/build/lttng-libust-2.4.0/.stamp_configured] Error 1 I think Romain Naour said the new version of lttng-libust was fixing this. Romain, could you send a patch to bump lttng-libust? > arm | lttng-tools-2.4.0 | NOK | http://autobuild.buildroot.net/results/64069f179545ec48e649ca2aae58941798070520/ > arm | lttng-tools-2.4.0 | NOK | http://autobuild.buildroot.net/results/4a200729f490a38d1170d5b9f5b125500638cba7/ Gaah, some custom external toolchain affected by the gcc bug... how to handle this? Add an exclusion to the autobuilder scripts? > xtensa | mesa3d-10.0.4 | NOK | http://autobuild.buildroot.net/results/66a9d2c664e0a9b2b0c51b998c72c2ceda90ff9b/ We need to add a NPTL dependency to mesa3d. In file included from pipebuffer/pb_buffer_fenced.c:47:0: ./os/os_thread.h: In function 'pipe_barrier_init': ./os/os_thread.h:325:4: error: implicit declaration of function 'pthread_barrier_init' [-Werror=implicit-function-declaration] ./os/os_thread.h: In function 'pipe_barrier_destroy': ./os/os_thread.h:330:4: error: implicit declaration of function 'pthread_barrier_destroy' [-Werror=implicit-function-declaration] ./os/os_thread.h: In function 'pipe_barrier_wait': ./os/os_thread.h:335:4: error: implicit declaration of function 'pthread_barrier_wait' [-Werror=implicit-function-declaration] > i686 | mesa3d-10.0.4 | NOK | http://autobuild.buildroot.net/results/61c1c566dc0e829cb663ca30b1fd6cf9cc6cd931/ checking for PTHREAD_PRIO_INHERIT... no configure: error: Building OpenGL ES1 without OpenGL is not supported make: *** [/home/test/test/1/output/build/mesa3d-10.0.4/.stamp_configured] Error 1 This is something for Yann to look at. > nios2 | minidlna-1.1.2 | NOK | http://autobuild.buildroot.net/results/1948b8998a8795436990178b6691a690327c67aa/ Not sure who can take care of this. checking for avformat_open_input in -lavformat... no configure: error: Could not find libavformat - part of ffmpeg make: *** [/home/test/test/3/output/build/minidlna-1.1.2/.stamp_configured] Error 1 > sh4 | nmap-6.40 | NOK | http://autobuild.buildroot.net/results/34d3e029f8cdefb0d1200fd45149fba256eea907/ > arm | nmap-6.40 | NOK | http://autobuild.buildroot.net/results/50f9580b6aa5bbf7dea9c8a597b12cdf67cf897d/ Fixed by http://git.buildroot.net/buildroot/commit/package/nmap?id=126d5b5bb847c4c303267e128c80c30ce679498a > arm | python-2.7.6 | NOK | http://autobuild.buildroot.net/results/81096c8736da5e0417f96a384a4967a1375f688a/ Another uClibc static linking problem, with symbols defined in both libc.a and libpthread.a. > avr32 | python-2.7.6 | NOK | http://autobuild.buildroot.net/results/e307f53b1ca8b385701e745138bad728e62d1017/ I have a patch to fix this, needs a final test and then I can submit it. > x86_64 | samba4-4.1.6 | NOK | http://autobuild.buildroot.net/results/a268755b6e5b1c7cdb40c6b96a561347125f7ff8/ default/source4/heimdal/lib/krb5/krb5_err.c:279:23: error: 'link' redeclared as different kind of symbol /home/test/test/3/output/host/usr/x86_64-buildroot-linux-uclibc/sysroot/usr/include/unistd.h:770:12: note: previous declaration of 'link' was here [ 906/3777] Compiling default/source4/heimdal/lib/krb5/heim_err.c default/source4/heimdal/lib/krb5/heim_err.c:168:23: error: 'link' redeclared as different kind of symbol /home/test/test/3/output/host/usr/x86_64-buildroot-linux-uclibc/sysroot/usr/include/unistd.h:770:12: note: previous declaration of 'link' was here Waf: Leaving directory `/home/test/test/3/output/build/samba4-4.1.6/bin' Samba 4 is Gustavo's stuff :-) > bfin | squashfs-4.2 | NOK | http://autobuild.buildroot.net/results/2738934fc23219a33fe1e07b3213b4e10266fc79/ Fixed by http://git.buildroot.net/buildroot/commit/package/squashfs?id=40988f824269fd181d933e2241c604b6b57af9e1 > avr32 | util-linux-2.24.1 | NOK | http://autobuild.buildroot.net/results/debb2a80fe82376d3de059c487d45adc26d41d1e/ Seems like the old uClibc version used on avr32 does not have qsort_r()... sun.c:(.text+0x1816): undefined reference to `qsort_r' Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] Analysis of build results for 2014-04-18 2014-04-19 7:08 ` [Buildroot] Analysis of build " Thomas Petazzoni @ 2014-04-19 8:43 ` Romain Naour 2014-04-19 10:32 ` Thomas Petazzoni 2014-04-20 3:51 ` Baruch Siach 2014-04-26 19:29 ` Bernd Kuhls 2 siblings, 1 reply; 11+ messages in thread From: Romain Naour @ 2014-04-19 8:43 UTC (permalink / raw) To: buildroot Hi Thomas, > >> arm | lttng-libust-2.4.0 | NOK | http://autobuild.buildroot.net/results/a6f5550cc63260126cb66a954af60f1633b97faf/ > > checking host system alignment requirements... checking for a Python interpreter with version >= 2.7... none > configure: error: no suitable Python interpreter found > make: *** [/home/test/test/1/output/build/lttng-libust-2.4.0/.stamp_configured] Error 1 > > I think Romain Naour said the new version of lttng-libust was fixing > this. Romain, could you send a patch to bump lttng-libust? Yes, but I think it would be better to keep all lttng tools in sync. lttng-tools 2.4.1 lttng-modules 2.4.1 lttng-ust 2.4.1 and bump liburcu to 0.8.4 while we are at it. Best regards, Romain ^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] Analysis of build results for 2014-04-18 2014-04-19 8:43 ` Romain Naour @ 2014-04-19 10:32 ` Thomas Petazzoni 2014-04-19 10:45 ` Romain Naour 0 siblings, 1 reply; 11+ messages in thread From: Thomas Petazzoni @ 2014-04-19 10:32 UTC (permalink / raw) To: buildroot Dear Romain Naour, On Sat, 19 Apr 2014 10:43:36 +0200, Romain Naour wrote: > > checking host system alignment requirements... checking for a Python interpreter with version >= 2.7... none > > configure: error: no suitable Python interpreter found > > make: *** [/home/test/test/1/output/build/lttng-libust-2.4.0/.stamp_configured] Error 1 > > > > I think Romain Naour said the new version of lttng-libust was fixing > > this. Romain, could you send a patch to bump lttng-libust? > > Yes, but I think it would be better to keep all lttng tools in sync. > lttng-tools 2.4.1 > lttng-modules 2.4.1 > lttng-ust 2.4.1 > and bump liburcu to 0.8.4 while we are at it. Sure. I'm waiting for your patches :-) Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] Analysis of build results for 2014-04-18 2014-04-19 10:32 ` Thomas Petazzoni @ 2014-04-19 10:45 ` Romain Naour 0 siblings, 0 replies; 11+ messages in thread From: Romain Naour @ 2014-04-19 10:45 UTC (permalink / raw) To: buildroot Hi Thomas, Le 19/04/2014 12:32, Thomas Petazzoni a ?crit : > Dear Romain Naour, > > On Sat, 19 Apr 2014 10:43:36 +0200, Romain Naour wrote: > >>> checking host system alignment requirements... checking for a Python interpreter with version >= 2.7... none >>> configure: error: no suitable Python interpreter found >>> make: *** [/home/test/test/1/output/build/lttng-libust-2.4.0/.stamp_configured] Error 1 >>> >>> I think Romain Naour said the new version of lttng-libust was fixing >>> this. Romain, could you send a patch to bump lttng-libust? >> >> Yes, but I think it would be better to keep all lttng tools in sync. >> lttng-tools 2.4.1 >> lttng-modules 2.4.1 >> lttng-ust 2.4.1 >> and bump liburcu to 0.8.4 while we are at it. > > Sure. I'm waiting for your patches :-) > > Thomas > They are already in the patchwork :) http://patchwork.ozlabs.org/patch/340473/ http://patchwork.ozlabs.org/patch/340477/ http://patchwork.ozlabs.org/patch/340474/ http://patchwork.ozlabs.org/patch/340475/ http://patchwork.ozlabs.org/patch/340476/ Romain ^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] Analysis of build results for 2014-04-18 2014-04-19 7:08 ` [Buildroot] Analysis of build " Thomas Petazzoni 2014-04-19 8:43 ` Romain Naour @ 2014-04-20 3:51 ` Baruch Siach 2014-04-20 5:23 ` Baruch Siach 2014-04-26 19:29 ` Bernd Kuhls 2 siblings, 1 reply; 11+ messages in thread From: Baruch Siach @ 2014-04-20 3:51 UTC (permalink / raw) To: buildroot Hi Thomas, On Sat, Apr 19, 2014 at 09:08:50AM +0200, Thomas Petazzoni wrote: > On Sat, 19 Apr 2014 08:30:09 +0200 (CEST), Thomas Petazzoni wrote: > > > success : 60 > > failures : 22 > > Much better than yesterday. Analysis below. [...] > > xtensa | mesa3d-10.0.4 | NOK | http://autobuild.buildroot.net/results/66a9d2c664e0a9b2b0c51b998c72c2ceda90ff9b/ > > We need to add a NPTL dependency to mesa3d. > > In file included from pipebuffer/pb_buffer_fenced.c:47:0: > ./os/os_thread.h: In function 'pipe_barrier_init': > ./os/os_thread.h:325:4: error: implicit declaration of function 'pthread_barrier_init' [-Werror=implicit-function-declaration] > ./os/os_thread.h: In function 'pipe_barrier_destroy': > ./os/os_thread.h:330:4: error: implicit declaration of function 'pthread_barrier_destroy' [-Werror=implicit-function-declaration] > ./os/os_thread.h: In function 'pipe_barrier_wait': > ./os/os_thread.h:335:4: error: implicit declaration of function 'pthread_barrier_wait' [-Werror=implicit-function-declaration] pthread_barrier_* are also available on LT and LT.old. It seems mesa3d just needs threads support. I'll try to work on this today. baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - ^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] Analysis of build results for 2014-04-18 2014-04-20 3:51 ` Baruch Siach @ 2014-04-20 5:23 ` Baruch Siach 2014-04-20 8:15 ` Thomas Petazzoni 0 siblings, 1 reply; 11+ messages in thread From: Baruch Siach @ 2014-04-20 5:23 UTC (permalink / raw) To: buildroot Hi Thomas, On Sun, Apr 20, 2014 at 06:51:25AM +0300, Baruch Siach wrote: > On Sat, Apr 19, 2014 at 09:08:50AM +0200, Thomas Petazzoni wrote: > > On Sat, 19 Apr 2014 08:30:09 +0200 (CEST), Thomas Petazzoni wrote: > > > > > success : 60 > > > failures : 22 > > > > Much better than yesterday. Analysis below. > > [...] > > > > xtensa | mesa3d-10.0.4 | NOK | http://autobuild.buildroot.net/results/66a9d2c664e0a9b2b0c51b998c72c2ceda90ff9b/ > > > > We need to add a NPTL dependency to mesa3d. > > > > In file included from pipebuffer/pb_buffer_fenced.c:47:0: > > ./os/os_thread.h: In function 'pipe_barrier_init': > > ./os/os_thread.h:325:4: error: implicit declaration of function 'pthread_barrier_init' [-Werror=implicit-function-declaration] > > ./os/os_thread.h: In function 'pipe_barrier_destroy': > > ./os/os_thread.h:330:4: error: implicit declaration of function 'pthread_barrier_destroy' [-Werror=implicit-function-declaration] > > ./os/os_thread.h: In function 'pipe_barrier_wait': > > ./os/os_thread.h:335:4: error: implicit declaration of function 'pthread_barrier_wait' [-Werror=implicit-function-declaration] > > pthread_barrier_* are also available on LT and LT.old. This is wrong. These declarations are under '#if 0' in LT.old, but implemented in LT. > It seems mesa3d just needs threads support. I'll try to work on this today. I guess that making mesa3d depend on NPTL should be enough, though. baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - ^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] Analysis of build results for 2014-04-18 2014-04-20 5:23 ` Baruch Siach @ 2014-04-20 8:15 ` Thomas Petazzoni 0 siblings, 0 replies; 11+ messages in thread From: Thomas Petazzoni @ 2014-04-20 8:15 UTC (permalink / raw) To: buildroot Dear Baruch Siach, On Sun, 20 Apr 2014 08:23:48 +0300, Baruch Siach wrote: > > pthread_barrier_* are also available on LT and LT.old. > > This is wrong. These declarations are under '#if 0' in LT.old, but implemented > in LT. Correct. But since we use LT.old by default, and it's pretty much the recommended solution when NPTL is not available, there's not much in adding some additional Config.in options just for this. So we can mark mesa3d as depending on NPTL. Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] Analysis of build results for 2014-04-18 2014-04-19 7:08 ` [Buildroot] Analysis of build " Thomas Petazzoni 2014-04-19 8:43 ` Romain Naour 2014-04-20 3:51 ` Baruch Siach @ 2014-04-26 19:29 ` Bernd Kuhls 2014-04-26 19:52 ` Bernd Kuhls 2 siblings, 1 reply; 11+ messages in thread From: Bernd Kuhls @ 2014-04-26 19:29 UTC (permalink / raw) To: buildroot Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote in news:20140419090850.339ca98f at skate: >> nios2 | minidlna-1.1.2 | NOK | >> http://autobuild.buildroot.net/results/1948b8998a8795436990178b6691 >> a690327c67aa/ > > Not sure who can take care of this. > > checking for avformat_open_input in -lavformat... no > configure: error: Could not find libavformat - part of ffmpeg > make: *** > [/home/test/test/3/output/build/minidlna-1.1.2/.stamp_configured] Error > 1 Hi, although I do not have any experience with nios2 I will try to take care of this build error. Regards, Bernd ^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] Analysis of build results for 2014-04-18 2014-04-26 19:29 ` Bernd Kuhls @ 2014-04-26 19:52 ` Bernd Kuhls 2014-04-26 20:27 ` Frank Bergmann 0 siblings, 1 reply; 11+ messages in thread From: Bernd Kuhls @ 2014-04-26 19:52 UTC (permalink / raw) To: buildroot Bernd Kuhls <berndkuhls@hotmail.com> wrote in news:22et2bxh5o.ln2 at ID-313208.user.individual.net: > Thomas Petazzoni > <thomas.petazzoni@free-electrons.com> > wrote in news:20140419090850.339ca98f at skate: > >>> nios2 | minidlna-1.1.2 | NOK | >>> http://autobuild.buildroot.net/results/1948b8998a8795436990178b669 >>> 1 a690327c67aa/ >> >> Not sure who can take care of this. >> >> checking for avformat_open_input in -lavformat... no >> configure: error: Could not find libavformat - part of ffmpeg >> make: *** >> [/home/test/test/3/output/build/minidlna-1.1.2/.stamp_configured] Error >> 1 > > Hi, > > although I do not have any experience with nios2 I will try to take care > of this build error. > > Regards, Bernd > Hi, it seems we hit the _gp linker bug again which Peter planned to investigate: http://patchwork.ozlabs.org/patch/312275/ Here is the minidlna/config.log snippet regarding the current autobuild error. Sorry, no solution from me this time. configure:9318: checking for avformat_open_input in -lavformat configure:9343: /home/buildroot/output/host/usr/bin/nios2-linux-gnu-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS= 64 conftest.c -lavformat >&5 /home/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/nios2-linux- gnu/4.7.3/../../../../nios2-linux-gnu/bin/ld: /home/buildroot/out put/host/usr/nios2-buildroot-linux-gnu/sysroot/usr/lib/crt1.o: undefined reference to symbol '_gp' /home/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/nios2-linux- gnu/4.7.3/../../../../nios2-linux-gnu/bin/ld: note: '_gp' is defined in DSO /home/buildroot/output/host/usr/nios2-buildroot-linux- gnu/sysroot/usr/lib/libvorbisenc.so.2 so try adding it to the linker command line /home/buildroot/output/host/usr/nios2-buildroot-linux- gnu/sysroot/usr/lib/libvorbisenc.so.2: could not read symbols: Invalid operation Regards, Bernd ^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] Analysis of build results for 2014-04-18 2014-04-26 19:52 ` Bernd Kuhls @ 2014-04-26 20:27 ` Frank Bergmann 0 siblings, 0 replies; 11+ messages in thread From: Frank Bergmann @ 2014-04-26 20:27 UTC (permalink / raw) To: buildroot On 26.04.2014 21:52, Bernd Kuhls wrote: > Bernd Kuhls <berndkuhls@hotmail.com> wrote in > news:22et2bxh5o.ln2 at ID-313208.user.individual.net: > >> Thomas Petazzoni >> <thomas.petazzoni@free-electrons.com> >> wrote in news:20140419090850.339ca98f at skate: >> >>>> nios2 | minidlna-1.1.2 | NOK | >>>> http://autobuild.buildroot.net/results/1948b8998a8795436990178b669 >>>> 1 a690327c67aa/ >>> >>> Not sure who can take care of this. >>> >>> checking for avformat_open_input in -lavformat... no >>> configure: error: Could not find libavformat - part of ffmpeg >>> make: *** >>> [/home/test/test/3/output/build/minidlna-1.1.2/.stamp_configured] Error >>> 1 >> >> Hi, >> >> although I do not have any experience with nios2 I will try to take care >> of this build error. >> >> Regards, Bernd >> > > Hi, > > it seems we hit the _gp linker bug again which Peter planned to > investigate: http://patchwork.ozlabs.org/patch/312275/ > > Here is the minidlna/config.log snippet regarding the current autobuild > error. Sorry, no solution from me this time. Hello, there are some packages that are affected by this bug. Shall all these packages be deactivated for nios2 ? binutils, gcc and gdb seems to have support for nios2 now but glibc lacks of it. And it seems that will not change in the near future. So an own buildroot toolchain can't be set up right now. Regards, Frank Bergmann. ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2014-04-26 20:27 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-04-19 6:30 [Buildroot] [autobuild.buildroot.net] Build results for 2014-04-18 Thomas Petazzoni 2014-04-19 7:08 ` [Buildroot] Analysis of build " Thomas Petazzoni 2014-04-19 8:43 ` Romain Naour 2014-04-19 10:32 ` Thomas Petazzoni 2014-04-19 10:45 ` Romain Naour 2014-04-20 3:51 ` Baruch Siach 2014-04-20 5:23 ` Baruch Siach 2014-04-20 8:15 ` Thomas Petazzoni 2014-04-26 19:29 ` Bernd Kuhls 2014-04-26 19:52 ` Bernd Kuhls 2014-04-26 20:27 ` Frank Bergmann
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox