* [Buildroot] [PATCHv2 00/10] musl support, internal and external backends
@ 2014-05-05 21:17 Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 01/10] musl: new package Thomas Petazzoni
` (10 more replies)
0 siblings, 11 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
Hello,
This patch series does two things:
* Adds the musl support in the internal toolchain backend.
* Adds a set of pre-built musl toolchains to the external toolchain
backend.
Compared to v1:
* The issue of the symbolic link for the dynamic linker noticed by
Peter is fixed. In fact, the musl Makefile can create this symbolic
link perfectly fine if we are in the good conditions.
* A patch for musl support in gcc 4.9.0 has been added.
* The patch for musl external toolchains has been added, and after
the suggestion from Arnout, a single Kconfig option is now used
instead of one per architecture.
I've built and boot tested under Qemu ARM/musl/gcc4.8 and
i386/musl/gcc4.9.
Thanks,
Thomas
Thomas Petazzoni (10):
musl: new package
gcc: add musl support patch for gcc 4.7.3
gcc: add musl support patch to gcc 4.8.2
gcc: add musl support patch to gcc 4.9.0
gcc: musl patches only available for gcc 4.7+
package: add support for musl in tuple
busybox: allow build with musl
toolchain-buildroot: add support for building musl toolchains
gcc: disable libsanitizer for musl
toolchain-external: add publicly available musl toolchains
package/Makefile.in | 2 +
package/busybox/busybox.mk | 9 +
package/gcc/4.7.3/900-musl-support.patch | 638 +++++++++++++++++
package/gcc/4.8.2/900-musl-support.patch | 755 +++++++++++++++++++++
package/gcc/4.9.0/900-musl-support.patch | 710 +++++++++++++++++++
package/gcc/Config.in.host | 8 +
package/gcc/gcc.mk | 5 +-
package/musl/musl.mk | 73 ++
toolchain/toolchain-buildroot/Config.in | 10 +
toolchain/toolchain-external/Config.in | 30 +
toolchain/toolchain-external/toolchain-external.mk | 27 +
11 files changed, 2265 insertions(+), 2 deletions(-)
create mode 100644 package/gcc/4.7.3/900-musl-support.patch
create mode 100644 package/gcc/4.8.2/900-musl-support.patch
create mode 100644 package/gcc/4.9.0/900-musl-support.patch
create mode 100644 package/musl/musl.mk
--
1.9.2
^ permalink raw reply [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 01/10] musl: new package
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
@ 2014-05-05 21:17 ` Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 02/10] gcc: add musl support patch for gcc 4.7.3 Thomas Petazzoni
` (9 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/musl/musl.mk | 73 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
create mode 100644 package/musl/musl.mk
diff --git a/package/musl/musl.mk b/package/musl/musl.mk
new file mode 100644
index 0000000..c3e868d
--- /dev/null
+++ b/package/musl/musl.mk
@@ -0,0 +1,73 @@
+################################################################################
+#
+# musl
+#
+################################################################################
+
+MUSL_VERSION = 1.1.0
+MUSL_SITE = http://www.musl-libc.org/releases/
+MUSL_LICENSE = MIT
+MUSL_LICENSE_FILES = COPYRIGHT
+
+# Before musl is configured, we must have the first stage
+# cross-compiler and the kernel headers
+MUSL_DEPENDENCIES = host-gcc-initial linux-headers
+
+# musl is part of the toolchain so disable the toolchain dependency
+MUSL_ADD_TOOLCHAIN_DEPENDENCY = NO
+
+MUSL_INSTALL_STAGING = YES
+
+# We need to run the musl configure script prior to building the
+# gcc-intermediate, so that we can call the install-headers step and
+# get the crt<X>.o built. However, we need to call it again after
+# gcc-intermediate has been built, otherwise the configure script
+# doesn't realize that libgcc has been built, and doesn't link the C
+# library properly with libgcc, which causes build failure down the
+# road. We will have the opportunity to simplify this once we switch
+# to a 2-steps gcc build.
+define MUSL_CONFIGURE_CALL
+ (cd $(@D); \
+ $(TARGET_CONFIGURE_OPTS) \
+ CFLAGS="$(filter-out -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64,$(TARGET_CFLAGS))" \
+ CPPFLAGS="$(filter-out -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64,$(TARGET_CPPFLAGS))" \
+ ./configure \
+ --target=$(GNU_TARGET_NAME) \
+ --host=$(GNU_TARGET_NAME) \
+ --prefix=/usr \
+ --disable-gcc-wrapper)
+endef
+
+define MUSL_CONFIGURE_CMDS
+ $(MUSL_CONFIGURE_CALL)
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
+ DESTDIR=$(STAGING_DIR) install-headers
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
+ crt/crt1.o crt/crti.o crt/crtn.o
+ cp $(@D)/crt/crt*.o $(STAGING_DIR)/usr/lib
+ $(TARGET_CROSS)gcc -nostdlib \
+ -nostartfiles -shared -x c /dev/null -o $(STAGING_DIR)/usr/lib/libc.so
+endef
+
+define MUSL_BUILD_CMDS
+ $(MUSL_CONFIGURE_CALL)
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)
+endef
+
+define MUSL_INSTALL_STAGING_CMDS
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
+ DESTDIR=$(STAGING_DIR) install-libs install-tools
+endef
+
+# prefix is set to an empty value to get the C library installed in
+# /lib and not /usr/lib
+define MUSL_INSTALL_TARGET_CMDS
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
+ DESTDIR=$(TARGET_DIR) prefix= install-libs
+ $(RM) $(addprefix $(TARGET_DIR)/lib/,crt1.o crtn.o crti.o Scrt1.o)
+endef
+
+$(eval $(generic-package))
+
+# Before musl is built, we must have the second stage cross-compiler
+$(MUSL_TARGET_BUILD): | host-gcc-intermediate
--
1.9.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 02/10] gcc: add musl support patch for gcc 4.7.3
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 01/10] musl: new package Thomas Petazzoni
@ 2014-05-05 21:17 ` Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 03/10] gcc: add musl support patch to gcc 4.8.2 Thomas Petazzoni
` (8 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/gcc/4.7.3/900-musl-support.patch | 638 +++++++++++++++++++++++++++++++
1 file changed, 638 insertions(+)
create mode 100644 package/gcc/4.7.3/900-musl-support.patch
diff --git a/package/gcc/4.7.3/900-musl-support.patch b/package/gcc/4.7.3/900-musl-support.patch
new file mode 100644
index 0000000..fffb84a
--- /dev/null
+++ b/package/gcc/4.7.3/900-musl-support.patch
@@ -0,0 +1,638 @@
+Add musl support to gcc
+
+This patch comes from the musl-cross project at
+https://bitbucket.org/GregorR/musl-cross/src. Compared to the upstream version:
+
+ * the config.sub modifications have been removed, because Buildroot
+ already overwrites all config.sub with a more recent config.sub
+ that has musl support.
+
+ * change to ensure that a dummy dynamic linker path
+ MUSL_DYNAMIC_LINKER<foo> is defined for all architectures,
+ otherwise building gcc for architectures not supported by musl was
+ causing build failure. Bug reported upstream at
+ https://bitbucket.org/GregorR/musl-gcc-patches/issue/4/musl-gcc-patches-break-the-build-on.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+
+# HG changeset patch
+# Parent f50bb54f331f73405131a30b4f353cfda1c70304
+Use the generic implementation of libstdc++ primitives when we're on musl, not the glibc one.
+
+Index: b/libstdc++-v3/configure.host
+===================================================================
+--- a/libstdc++-v3/configure.host
++++ b/libstdc++-v3/configure.host
+@@ -243,6 +243,13 @@
+ os_include_dir="os/bsd/freebsd"
+ ;;
+ gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu)
++ # check for musl by target
++ case "${host_os}" in
++ *-musl*)
++ os_include_dir="os/generic"
++ ;;
++ *)
++
+ if [ "$uclibc" = "yes" ]; then
+ os_include_dir="os/uclibc"
+ elif [ "$bionic" = "yes" ]; then
+@@ -251,6 +258,9 @@
+ os_include_dir="os/gnu-linux"
+ fi
+ ;;
++
++ esac
++ ;;
+ hpux*)
+ os_include_dir="os/hpux"
+ ;;
+Index: b/gcc/config.gcc
+===================================================================
+--- a/gcc/config.gcc
++++ b/gcc/config.gcc
+@@ -522,7 +522,7 @@
+ esac
+
+ # Common C libraries.
+-tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
++tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4"
+
+ # Common parts for widely ported systems.
+ case ${target} in
+@@ -625,6 +625,9 @@
+ *-*-*uclibc*)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
+ ;;
++ *-*-*musl*)
++ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL"
++ ;;
+ *)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
+ ;;
+@@ -2092,6 +2095,10 @@
+ powerpc*-*-linux*paired*)
+ tm_file="${tm_file} rs6000/750cl.h" ;;
+ esac
++ case ${target} in
++ *-linux*-musl*)
++ enable_secureplt=yes ;;
++ esac
+ if test x${enable_secureplt} = xyes; then
+ tm_file="rs6000/secureplt.h ${tm_file}"
+ fi
+Index: b/gcc/config/linux.h
+===================================================================
+--- a/gcc/config/linux.h
++++ b/gcc/config/linux.h
+@@ -33,10 +33,12 @@
+ #define OPTION_GLIBC (DEFAULT_LIBC == LIBC_GLIBC)
+ #define OPTION_UCLIBC (DEFAULT_LIBC == LIBC_UCLIBC)
+ #define OPTION_BIONIC (DEFAULT_LIBC == LIBC_BIONIC)
++#define OPTION_MUSL (DEFAULT_LIBC == LIBC_MUSL)
+ #else
+ #define OPTION_GLIBC (linux_libc == LIBC_GLIBC)
+ #define OPTION_UCLIBC (linux_libc == LIBC_UCLIBC)
+ #define OPTION_BIONIC (linux_libc == LIBC_BIONIC)
++#define OPTION_MUSL (linux_libc == LIBC_MUSL)
+ #endif
+
+ #define GNU_USER_TARGET_OS_CPP_BUILTINS() \
+@@ -54,18 +56,21 @@
+ uClibc or Bionic is the default C library and whether
+ -muclibc or -mglibc or -mbionic has been passed to change the default. */
+
+-#define CHOOSE_DYNAMIC_LINKER1(LIBC1, LIBC2, LIBC3, LD1, LD2, LD3) \
+- "%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:" LD1 "}}"
++#define CHOOSE_DYNAMIC_LINKER1(LIBC1, LIBC2, LIBC3, LIBC4, LD1, LD2, LD3, LD4) \
++ "%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:%{" LIBC4 ":" LD4 ";:" LD1 "}}}"
+
+ #if DEFAULT_LIBC == LIBC_GLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
+- CHOOSE_DYNAMIC_LINKER1 ("mglibc", "muclibc", "mbionic", G, U, B)
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("mglibc", "muclibc", "mbionic", "mmusl", G, U, B, M)
+ #elif DEFAULT_LIBC == LIBC_UCLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
+- CHOOSE_DYNAMIC_LINKER1 ("muclibc", "mglibc", "mbionic", U, G, B)
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("muclibc", "mglibc", "mbionic", "mmusl", U, G, B, M)
+ #elif DEFAULT_LIBC == LIBC_BIONIC
+-#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
+- CHOOSE_DYNAMIC_LINKER1 ("mbionic", "mglibc", "muclibc", B, G, U)
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("mbionic", "mglibc", "muclibc", "mmusl", B, G, U, M)
++#elif DEFAULT_LIBC == LIBC_MUSL
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("mmusl", "mglibc", "muclibc", "mbionic", M, G, U, B)
+ #else
+ #error "Unsupported DEFAULT_LIBC"
+ #endif /* DEFAULT_LIBC */
+@@ -83,23 +88,32 @@
+ #define BIONIC_DYNAMIC_LINKER64 "/system/bin/linker64"
+ #define BIONIC_DYNAMIC_LINKERX32 "/system/bin/linkerx32"
+
++/* Musl dynamic linker paths must be defined on a per-architecture
++ basis, for each architecture supported by Musl. However, in order
++ to let other architectures continue to build with other C
++ libraries, we provide a dummy definition of the following defines. */
++#define MUSL_DYNAMIC_LINKER "invalid"
++#define MUSL_DYNAMIC_LINKER32 "invalid"
++#define MUSL_DYNAMIC_LINKER64 "invalid"
++#define MUSL_DYNAMIC_LINKERX32 "invalid"
++
+ #define GNU_USER_DYNAMIC_LINKER \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER, \
+- BIONIC_DYNAMIC_LINKER)
++ BIONIC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER)
+ #define GNU_USER_DYNAMIC_LINKER32 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32, \
+- BIONIC_DYNAMIC_LINKER32)
++ BIONIC_DYNAMIC_LINKER32, MUSL_DYNAMIC_LINKER32)
+ #define GNU_USER_DYNAMIC_LINKER64 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, \
+- BIONIC_DYNAMIC_LINKER64)
++ BIONIC_DYNAMIC_LINKER64, MUSL_DYNAMIC_LINKER64)
+ #define GNU_USER_DYNAMIC_LINKERX32 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERX32, UCLIBC_DYNAMIC_LINKERX32, \
+- BIONIC_DYNAMIC_LINKERX32)
++ BIONIC_DYNAMIC_LINKERX32, MUSL_DYNAMIC_LINKERX32)
+
+ /* Determine whether the entire c99 runtime
+ is present in the runtime library. */
+ #undef TARGET_C99_FUNCTIONS
+-#define TARGET_C99_FUNCTIONS (OPTION_GLIBC)
++#define TARGET_C99_FUNCTIONS (OPTION_GLIBC || OPTION_MUSL)
+
+ /* Whether we have sincos that follows the GNU extension. */
+ #undef TARGET_HAS_SINCOS
+@@ -108,3 +122,74 @@
+ /* Whether we have Bionic libc runtime */
+ #undef TARGET_HAS_BIONIC
+ #define TARGET_HAS_BIONIC (OPTION_BIONIC)
++
++/* musl avoids problematic includes by rearranging the include directories.
++ * Unfortunately, this is mostly duplicated from cppdefault.c */
++#if DEFAULT_LIBC == LIBC_MUSL
++#define INCLUDE_DEFAULTS_MUSL_GPP \
++ { GPLUSPLUS_INCLUDE_DIR, "G++", 1, 1, \
++ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 }, \
++ { GPLUSPLUS_TOOL_INCLUDE_DIR, "G++", 1, 1, \
++ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 1 }, \
++ { GPLUSPLUS_BACKWARD_INCLUDE_DIR, "G++", 1, 1, \
++ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 },
++
++#ifdef LOCAL_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_LOCAL \
++ { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 2 }, \
++ { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 0 },
++#else
++#define INCLUDE_DEFAULTS_MUSL_LOCAL
++#endif
++
++#ifdef PREFIX_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_PREFIX \
++ { PREFIX_INCLUDE_DIR, 0, 0, 1, 0, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_PREFIX
++#endif
++
++#ifdef CROSS_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_CROSS \
++ { CROSS_INCLUDE_DIR, "GCC", 0, 0, 0, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_CROSS
++#endif
++
++#ifdef TOOL_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_TOOL \
++ { TOOL_INCLUDE_DIR, "BINUTILS", 0, 1, 0, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_TOOL
++#endif
++
++#ifdef NATIVE_SYSTEM_HEADER_DIR
++#define INCLUDE_DEFAULTS_MUSL_NATIVE \
++ { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 2 }, \
++ { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 0 },
++#else
++#define INCLUDE_DEFAULTS_MUSL_NATIVE
++#endif
++
++#if defined (CROSS_DIRECTORY_STRUCTURE) && !defined (TARGET_SYSTEM_ROOT)
++# undef INCLUDE_DEFAULTS_MUSL_LOCAL
++# define INCLUDE_DEFAULTS_MUSL_LOCAL
++# undef INCLUDE_DEFAULTS_MUSL_NATIVE
++# define INCLUDE_DEFAULTS_MUSL_NATIVE
++#else
++# undef INCLUDE_DEFAULTS_MUSL_CROSS
++# define INCLUDE_DEFAULTS_MUSL_CROSS
++#endif
++
++#undef INCLUDE_DEFAULTS
++#define INCLUDE_DEFAULTS \
++ { \
++ INCLUDE_DEFAULTS_MUSL_GPP \
++ INCLUDE_DEFAULTS_MUSL_PREFIX \
++ INCLUDE_DEFAULTS_MUSL_CROSS \
++ INCLUDE_DEFAULTS_MUSL_TOOL \
++ INCLUDE_DEFAULTS_MUSL_NATIVE \
++ { GCC_INCLUDE_DIR, "GCC", 0, 1, 0, 0 }, \
++ { 0, 0, 0, 0, 0, 0 } \
++ }
++#endif
+Index: b/gcc/config/linux.opt
+===================================================================
+--- a/gcc/config/linux.opt
++++ b/gcc/config/linux.opt
+@@ -30,3 +30,7 @@
+ muclibc
+ Target Report RejectNegative Var(linux_libc,LIBC_UCLIBC) Negative(mbionic)
+ Use uClibc C library
++
++mmusl
++Target Report RejectNegative Var(linux_libc,LIBC_MUSL) Negative(mglibc)
++Use musl C library
+Index: b/gcc/ginclude/stddef.h
+===================================================================
+--- a/gcc/ginclude/stddef.h
++++ b/gcc/ginclude/stddef.h
+@@ -184,6 +184,7 @@
+ #ifndef _GCC_SIZE_T
+ #ifndef _SIZET_
+ #ifndef __size_t
++#ifndef __DEFINED_size_t /* musl */
+ #define __size_t__ /* BeOS */
+ #define __SIZE_T__ /* Cray Unicos/Mk */
+ #define _SIZE_T
+@@ -200,6 +201,7 @@
+ #define ___int_size_t_h
+ #define _GCC_SIZE_T
+ #define _SIZET_
++#define __DEFINED_size_t /* musl */
+ #if (defined (__FreeBSD__) && (__FreeBSD__ >= 5)) \
+ || defined(__FreeBSD_kernel__)
+ /* __size_t is a typedef on FreeBSD 5, must not trash it. */
+@@ -215,6 +217,7 @@
+ typedef long ssize_t;
+ #endif /* __BEOS__ */
+ #endif /* !(defined (__GNUG__) && defined (size_t)) */
++#endif /* __DEFINED_size_t */
+ #endif /* __size_t */
+ #endif /* _SIZET_ */
+ #endif /* _GCC_SIZE_T */
+Index: b/libgomp/config/posix/time.c
+===================================================================
+--- a/libgomp/config/posix/time.c
++++ b/libgomp/config/posix/time.c
+@@ -28,6 +28,8 @@
+ The following implementation uses the most simple POSIX routines.
+ If present, POSIX 4 clocks should be used instead. */
+
++#define _POSIX_C_SOURCE 199309L /* for clocks */
++
+ #include "libgomp.h"
+ #include <unistd.h>
+ #if TIME_WITH_SYS_TIME
+Index: b/libgcc/unwind-dw2-fde-dip.c
+===================================================================
+--- a/libgcc/unwind-dw2-fde-dip.c
++++ b/libgcc/unwind-dw2-fde-dip.c
+@@ -47,28 +47,13 @@
+ #include "unwind-compat.h"
+ #include "gthr.h"
+
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ > 2) \
+- || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 2 && defined(DT_CONFIG)))
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(__FreeBSD__) && __FreeBSD__ >= 7
+-# define ElfW __ElfN
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(__OpenBSD__)
+-# define ElfW(type) Elf_##type
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(TARGET_DL_ITERATE_PHDR) \
+- && defined(__sun__) && defined(__svr4__)
++#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) && defined(TARGET_DL_ITERATE_PHDR)
+ # define USE_PT_GNU_EH_FRAME
++# ifdef __OpenBSD__
++# define ElfW(type) Elf_##typ
++# elif defined(__FreeBSD__) && __FreeBSD__ >= 7
++# define ElfW __ElfN
++# endif
+ #endif
+
+ #if defined(USE_PT_GNU_EH_FRAME)
+Index: b/gcc/configure
+===================================================================
+--- a/gcc/configure
++++ b/gcc/configure
+@@ -26787,6 +26787,9 @@
+ else
+ gcc_cv_libc_provides_ssp=no
+ case "$target" in
++ *-*-musl*)
++ # All versions of musl provide stack protector
++ gcc_cv_libc_provides_ssp=yes;;
+ *-*-linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
+ # glibc 2.4 and later provides __stack_chk_fail and
+ # either __stack_chk_guard, or TLS access to stack guard canary.
+@@ -26820,6 +26823,7 @@
+ # <http://gcc.gnu.org/ml/gcc/2008-10/msg00130.html>) and for now
+ # simply assert that glibc does provide this, which is true for all
+ # realistically usable GNU/Hurd configurations.
++ # All supported versions of musl provide it as well
+ gcc_cv_libc_provides_ssp=yes;;
+ *-*-darwin* | *-*-freebsd*)
+ ac_fn_c_check_func "$LINENO" "__stack_chk_fail" "ac_cv_func___stack_chk_fail"
+@@ -26902,6 +26906,9 @@
+ gcc_cv_target_dl_iterate_phdr=no
+ fi
+ ;;
++ *-linux-musl*)
++ gcc_cv_target_dl_iterate_phdr=yes
++ ;;
+ esac
+
+ if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
+Index: b/gcc/configure.ac
+===================================================================
+--- a/gcc/configure.ac
++++ b/gcc/configure.ac
+@@ -4664,6 +4664,9 @@
+ gcc_cv_libc_provides_ssp,
+ [gcc_cv_libc_provides_ssp=no
+ case "$target" in
++ *-*-musl*)
++ # All versions of musl provide stack protector
++ gcc_cv_libc_provides_ssp=yes;;
+ *-*-linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
+ [# glibc 2.4 and later provides __stack_chk_fail and
+ # either __stack_chk_guard, or TLS access to stack guard canary.
+@@ -4697,6 +4700,7 @@
+ # <http://gcc.gnu.org/ml/gcc/2008-10/msg00130.html>) and for now
+ # simply assert that glibc does provide this, which is true for all
+ # realistically usable GNU/Hurd configurations.
++ # All supported versions of musl provide it as well
+ gcc_cv_libc_provides_ssp=yes;;
+ *-*-darwin* | *-*-freebsd*)
+ AC_CHECK_FUNC(__stack_chk_fail,[gcc_cv_libc_provides_ssp=yes],
+@@ -4762,6 +4766,9 @@
+ gcc_cv_target_dl_iterate_phdr=no
+ fi
+ ;;
++ *-linux-musl*)
++ gcc_cv_target_dl_iterate_phdr=yes
++ ;;
+ esac
+ GCC_TARGET_TEMPLATE([TARGET_DL_ITERATE_PHDR])
+ if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
+Index: b/fixincludes/mkfixinc.sh
+===================================================================
+--- a/fixincludes/mkfixinc.sh
++++ b/fixincludes/mkfixinc.sh
+@@ -20,7 +20,8 @@
+ powerpc-*-eabi* | \
+ powerpc-*-rtems* | \
+ powerpcle-*-eabisim* | \
+- powerpcle-*-eabi* )
++ powerpcle-*-eabi* | \
++ *-musl* )
+ # IF there is no include fixing,
+ # THEN create a no-op fixer and exit
+ (echo "#! /bin/sh" ; echo "exit 0" ) > ${target}
+Index: b/gcc/config/i386/linux.h
+===================================================================
+--- a/gcc/config/i386/linux.h
++++ b/gcc/config/i386/linux.h
+@@ -22,3 +22,5 @@
+
+ #define GNU_USER_LINK_EMULATION "elf_i386"
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-i386.so.1"
+Index: b/gcc/config/i386/linux64.h
+===================================================================
+--- a/gcc/config/i386/linux64.h
++++ b/gcc/config/i386/linux64.h
+@@ -31,3 +31,10 @@
+ #define GLIBC_DYNAMIC_LINKER32 "/lib/ld-linux.so.2"
+ #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
+ #define GLIBC_DYNAMIC_LINKERX32 "/libx32/ld-linux-x32.so.2"
++
++#undef MUSL_DYNAMIC_LINKER32
++#undef MUSL_DYNAMIC_LINKER64
++#undef MUSL_DYNAMIC_LINKERX32
++#define MUSL_DYNAMIC_LINKER32 "/lib/ld-musl-i386.so.1"
++#define MUSL_DYNAMIC_LINKER64 "/lib/ld-musl-x86_64.so.1"
++#define MUSL_DYNAMIC_LINKERX32 "/lib/ld-musl-x32.so.1"
+Index: b/libitm/config/linux/x86/tls.h
+===================================================================
+--- a/libitm/config/linux/x86/tls.h
++++ b/libitm/config/linux/x86/tls.h
+@@ -25,16 +25,19 @@
+ #ifndef LIBITM_X86_TLS_H
+ #define LIBITM_X86_TLS_H 1
+
+-#if defined(__GLIBC_PREREQ) && __GLIBC_PREREQ(2, 10)
++#if defined(__GLIBC_PREREQ)
++#if __GLIBC_PREREQ(2, 10)
+ /* Use slots in the TCB head rather than __thread lookups.
+ GLIBC has reserved words 10 through 13 for TM. */
+ #define HAVE_ARCH_GTM_THREAD 1
+ #define HAVE_ARCH_GTM_THREAD_DISP 1
+ #endif
++#endif
+
+ #include "config/generic/tls.h"
+
+-#if defined(__GLIBC_PREREQ) && __GLIBC_PREREQ(2, 10)
++#if defined(__GLIBC_PREREQ)
++#if __GLIBC_PREREQ(2, 10)
+ namespace GTM HIDDEN {
+
+ #ifdef __x86_64__
+@@ -101,5 +104,6 @@
+
+ } // namespace GTM
+ #endif /* >= GLIBC 2.10 */
++#endif
+
+ #endif // LIBITM_X86_TLS_H
+Index: b/gcc/config/arm/linux-eabi.h
+===================================================================
+--- a/gcc/config/arm/linux-eabi.h
++++ b/gcc/config/arm/linux-eabi.h
+@@ -64,6 +64,23 @@
+ #undef GLIBC_DYNAMIC_LINKER
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.3"
+
++/* For ARM musl currently supports four dynamic linkers:
++ - ld-musl-arm.so.1 - for the EABI-derived soft-float ABI
++ - ld-musl-armhf.so.1 - for the EABI-derived hard-float ABI
++ - ld-musl-armeb.so.1 - for the EABI-derived soft-float ABI, EB
++ - ld-musl-armebhf.so.1 - for the EABI-derived hard-float ABI, EB
++ musl does not support the legacy OABI mode.
++ All the dynamic linkers live in /lib.
++ We default to soft-float, EL. */
++#undef MUSL_DYNAMIC_LINKER
++#if TARGET_BIG_ENDIAN_DEFAULT
++#define MUSL_DYNAMIC_LINKER_E "%{mlittle-endian:;:eb}"
++#else
++#define MUSL_DYNAMIC_LINKER_E "%{mbig-endian:eb}"
++#endif
++#define MUSL_DYNAMIC_LINKER \
++ "/lib/ld-musl-arm" MUSL_DYNAMIC_LINKER_E "%{mfloat-abi=hard:hf}.so.1"
++
+ /* At this point, bpabi.h will have clobbered LINK_SPEC. We want to
+ use the GNU/Linux version, not the generic BPABI version. */
+ #undef LINK_SPEC
+Index: b/libitm/config/arm/hwcap.cc
+===================================================================
+--- a/libitm/config/arm/hwcap.cc
++++ b/libitm/config/arm/hwcap.cc
+@@ -40,7 +40,11 @@
+
+ #ifdef __linux__
+ #include <unistd.h>
++#ifdef __GLIBC__
+ #include <sys/fcntl.h>
++#else
++#include <fcntl.h>
++#endif
+ #include <elf.h>
+
+ static void __attribute__((constructor))
+Index: b/gcc/config/mips/linux.h
+===================================================================
+--- a/gcc/config/mips/linux.h
++++ b/gcc/config/mips/linux.h
+@@ -19,3 +19,11 @@
+ <http://www.gnu.org/licenses/>. */
+
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
++
++#if TARGET_ENDIAN_DEFAULT == 0 /* LE */
++#define MUSL_DYNAMIC_LINKER_E "%{EB:;:el}"
++#else
++#define MUSL_DYNAMIC_LINKER_E "%{EL:el}"
++#endif
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-mips" MUSL_DYNAMIC_LINKER_E ".so.1"
+Index: b/gcc/config/rs6000/linux64.h
+===================================================================
+--- a/gcc/config/rs6000/linux64.h
++++ b/gcc/config/rs6000/linux64.h
+@@ -362,17 +362,23 @@
+ #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld64.so.1"
+ #define UCLIBC_DYNAMIC_LINKER32 "/lib/ld-uClibc.so.0"
+ #define UCLIBC_DYNAMIC_LINKER64 "/lib/ld64-uClibc.so.0"
++#undef MUSL_DYNAMIC_LINKER32
++#undef MUSL_DYNAMIC_LINKER64
++#define MUSL_DYNAMIC_LINKER32 "/lib/ld-musl-powerpc.so.1"
++#define MUSL_DYNAMIC_LINKER64 "/lib/ld-musl-powerpc64.so.1"
+ #if DEFAULT_LIBC == LIBC_UCLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{mmusl:" M ";:" U "}}"
+ #elif DEFAULT_LIBC == LIBC_GLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:" U ";:" G "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{muclibc:" U ";:%{mmusl:" M ";:" G "}}"
++#elif DEFAULT_LIBC == LIBC_MUSL
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{muclibc:" U ";:" M "}}"
+ #else
+ #error "Unsupported DEFAULT_LIBC"
+ #endif
+ #define GNU_USER_DYNAMIC_LINKER32 \
+- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32)
++ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32, MUSL_DYNAMIC_LINKER32)
+ #define GNU_USER_DYNAMIC_LINKER64 \
+- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64)
++ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, MUSL_DYNAMIC_LINKER64)
+
+
+ #define LINK_OS_LINUX_SPEC32 "-m elf32ppclinux %{!shared: %{!static: \
+Index: b/gcc/config/rs6000/secureplt.h
+===================================================================
+--- a/gcc/config/rs6000/secureplt.h
++++ b/gcc/config/rs6000/secureplt.h
+@@ -18,3 +18,4 @@
+ <http://www.gnu.org/licenses/>. */
+
+ #define CC1_SECURE_PLT_DEFAULT_SPEC "-msecure-plt"
++#define LINK_SECURE_PLT_DEFAULT_SPEC "--secure-plt"
+Index: b/gcc/config/rs6000/sysv4.h
+===================================================================
+--- a/gcc/config/rs6000/sysv4.h
++++ b/gcc/config/rs6000/sysv4.h
+@@ -566,6 +566,9 @@
+ #ifndef CC1_SECURE_PLT_DEFAULT_SPEC
+ #define CC1_SECURE_PLT_DEFAULT_SPEC ""
+ #endif
++#ifndef LINK_SECURE_PLT_DEFAULT_SPEC
++#define LINK_SECURE_PLT_DEFAULT_SPEC ""
++#endif
+
+ /* Pass -G xxx to the compiler and set correct endian mode. */
+ #define CC1_SPEC "%{G*} %(cc1_cpu) \
+@@ -626,7 +629,8 @@
+ %{mlittle: --oformat elf32-powerpcle } %{mlittle-endian: --oformat elf32-powerpcle } \
+ %{!mlittle: %{!mlittle-endian: %{!mbig: %{!mbig-endian: \
+ %{mcall-i960-old: --oformat elf32-powerpcle} \
+- }}}}"
++ }}}} \
++%{!mbss-plt: %{!msecure-plt: %(link_secure_plt_default)}}"
+
+ /* Any specific OS flags. */
+ #define LINK_OS_SPEC "\
+@@ -804,15 +808,19 @@
+
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
+ #define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-powerpc.so.1"
+ #if DEFAULT_LIBC == LIBC_UCLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{mmusl:" M ";:" U "}}"
++#elif DEFAULT_LIBC == LIBC_MUSL
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{muclibc:" U ";:" M "}}"
+ #elif !defined (DEFAULT_LIBC) || DEFAULT_LIBC == LIBC_GLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:" U ";:" G "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{muclibc:" U ";:%{mmusl:" M ";:" G "}}"
+ #else
+ #error "Unsupported DEFAULT_LIBC"
+ #endif
+ #define GNU_USER_DYNAMIC_LINKER \
+- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
++ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER)
+
+ #define LINK_OS_LINUX_SPEC "-m elf32ppclinux %{!shared: %{!static: \
+ %{rdynamic:-export-dynamic} \
+@@ -938,6 +946,7 @@
+ { "cc1_endian_little", CC1_ENDIAN_LITTLE_SPEC }, \
+ { "cc1_endian_default", CC1_ENDIAN_DEFAULT_SPEC }, \
+ { "cc1_secure_plt_default", CC1_SECURE_PLT_DEFAULT_SPEC }, \
++ { "link_secure_plt_default", LINK_SECURE_PLT_DEFAULT_SPEC }, \
+ { "cpp_os_ads", CPP_OS_ADS_SPEC }, \
+ { "cpp_os_yellowknife", CPP_OS_YELLOWKNIFE_SPEC }, \
+ { "cpp_os_mvme", CPP_OS_MVME_SPEC }, \
+Index: b/gcc/config/mips/linux64.h
+===================================================================
+--- a/gcc/config/mips/linux64.h
++++ b/gcc/config/mips/linux64.h
+@@ -30,4 +30,4 @@
+ #define BIONIC_DYNAMIC_LINKERN32 "/system/bin/linker32"
+ #define GNU_USER_DYNAMIC_LINKERN32 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERN32, UCLIBC_DYNAMIC_LINKERN32, \
+- BIONIC_DYNAMIC_LINKERN32)
++ BIONIC_DYNAMIC_LINKERN32, MUSL_DYNAMIC_LINKER)
--
1.9.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 03/10] gcc: add musl support patch to gcc 4.8.2
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 01/10] musl: new package Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 02/10] gcc: add musl support patch for gcc 4.7.3 Thomas Petazzoni
@ 2014-05-05 21:17 ` Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 04/10] gcc: add musl support patch to gcc 4.9.0 Thomas Petazzoni
` (7 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/gcc/4.8.2/900-musl-support.patch | 755 +++++++++++++++++++++++++++++++
1 file changed, 755 insertions(+)
create mode 100644 package/gcc/4.8.2/900-musl-support.patch
diff --git a/package/gcc/4.8.2/900-musl-support.patch b/package/gcc/4.8.2/900-musl-support.patch
new file mode 100644
index 0000000..ec60c6e
--- /dev/null
+++ b/package/gcc/4.8.2/900-musl-support.patch
@@ -0,0 +1,755 @@
+Add musl support to gcc
+
+This patch comes from the musl-cross project at
+https://bitbucket.org/GregorR/musl-cross/src. Compared to the upstream version:
+
+ * the config.sub modifications have been removed, because Buildroot
+ already overwrites all config.sub with a more recent config.sub
+ that has musl support.
+
+ * change to ensure that a dummy dynamic linker path
+ MUSL_DYNAMIC_LINKER<foo> is defined for all architectures,
+ otherwise building gcc for architectures not supported by musl was
+ causing build failure. Bug reported upstream at
+ https://bitbucket.org/GregorR/musl-gcc-patches/issue/4/musl-gcc-patches-break-the-build-on.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+
+Index: b/fixincludes/mkfixinc.sh
+===================================================================
+--- a/fixincludes/mkfixinc.sh
++++ b/fixincludes/mkfixinc.sh
+@@ -19,7 +19,8 @@
+ powerpc-*-eabi* | \
+ powerpc-*-rtems* | \
+ powerpcle-*-eabisim* | \
+- powerpcle-*-eabi* )
++ powerpcle-*-eabi* | \
++ *-musl* )
+ # IF there is no include fixing,
+ # THEN create a no-op fixer and exit
+ (echo "#! /bin/sh" ; echo "exit 0" ) > ${target}
+Index: b/gcc/config.gcc
+===================================================================
+--- a/gcc/config.gcc
++++ b/gcc/config.gcc
+@@ -550,7 +550,7 @@
+ esac
+
+ # Common C libraries.
+-tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
++tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4"
+
+ # Common parts for widely ported systems.
+ case ${target} in
+@@ -653,6 +653,9 @@
+ *-*-*uclibc*)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
+ ;;
++ *-*-*musl*)
++ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL"
++ ;;
+ *)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
+ ;;
+@@ -2114,6 +2117,10 @@
+ powerpc*-*-linux*paired*)
+ tm_file="${tm_file} rs6000/750cl.h" ;;
+ esac
++ case ${target} in
++ *-linux*-musl*)
++ enable_secureplt=yes ;;
++ esac
+ if test x${enable_secureplt} = xyes; then
+ tm_file="rs6000/secureplt.h ${tm_file}"
+ fi
+Index: b/gcc/config/aarch64/aarch64-linux.h
+===================================================================
+--- a/gcc/config/aarch64/aarch64-linux.h
++++ b/gcc/config/aarch64/aarch64-linux.h
+@@ -21,7 +21,12 @@
+ #ifndef GCC_AARCH64_LINUX_H
+ #define GCC_AARCH64_LINUX_H
+
++/* The AArch64 port currently supports two dynamic linkers:
++ - ld-linux-aarch64.so.1 - GLIBC dynamic linker
++ - ld-musl-aarch64.so.1 - musl libc dynamic linker */
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux-aarch64.so.1"
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-aarch64.so.1"
+
+ #define CPP_SPEC "%{pthread:-D_REENTRANT}"
+
+Index: b/gcc/config/arm/linux-eabi.h
+===================================================================
+--- a/gcc/config/arm/linux-eabi.h
++++ b/gcc/config/arm/linux-eabi.h
+@@ -77,6 +77,23 @@
+ %{mfloat-abi=soft*:" GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "} \
+ %{!mfloat-abi=*:" GLIBC_DYNAMIC_LINKER_DEFAULT "}"
+
++/* For ARM musl currently supports four dynamic linkers:
++ - ld-musl-arm.so.1 - for the EABI-derived soft-float ABI
++ - ld-musl-armhf.so.1 - for the EABI-derived hard-float ABI
++ - ld-musl-armeb.so.1 - for the EABI-derived soft-float ABI, EB
++ - ld-musl-armebhf.so.1 - for the EABI-derived hard-float ABI, EB
++ musl does not support the legacy OABI mode.
++ All the dynamic linkers live in /lib.
++ We default to soft-float, EL. */
++#undef MUSL_DYNAMIC_LINKER
++#if TARGET_BIG_ENDIAN_DEFAULT
++#define MUSL_DYNAMIC_LINKER_E "%{mlittle-endian:;:eb}"
++#else
++#define MUSL_DYNAMIC_LINKER_E "%{mbig-endian:eb}"
++#endif
++#define MUSL_DYNAMIC_LINKER \
++ "/lib/ld-musl-arm" MUSL_DYNAMIC_LINKER_E "%{mfloat-abi=hard:hf}.so.1"
++
+ /* At this point, bpabi.h will have clobbered LINK_SPEC. We want to
+ use the GNU/Linux version, not the generic BPABI version. */
+ #undef LINK_SPEC
+Index: b/gcc/config/i386/linux.h
+===================================================================
+--- a/gcc/config/i386/linux.h
++++ b/gcc/config/i386/linux.h
+@@ -21,3 +21,5 @@
+
+ #define GNU_USER_LINK_EMULATION "elf_i386"
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-i386.so.1"
+Index: b/gcc/config/i386/linux64.h
+===================================================================
+--- a/gcc/config/i386/linux64.h
++++ b/gcc/config/i386/linux64.h
+@@ -30,3 +30,10 @@
+ #define GLIBC_DYNAMIC_LINKER32 "/lib/ld-linux.so.2"
+ #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
+ #define GLIBC_DYNAMIC_LINKERX32 "/libx32/ld-linux-x32.so.2"
++
++#undef MUSL_DYNAMIC_LINKER32
++#define MUSL_DYNAMIC_LINKER32 "/lib/ld-musl-i386.so.1"
++#undef MUSL_DYNAMIC_LINKER64
++#define MUSL_DYNAMIC_LINKER64 "/lib/ld-musl-x86_64.so.1"
++#undef MUSL_DYNAMIC_LINKERX32
++#define MUSL_DYNAMIC_LINKERX32 "/lib/ld-musl-x32.so.1"
+Index: b/gcc/config/linux.h
+===================================================================
+--- a/gcc/config/linux.h
++++ b/gcc/config/linux.h
+@@ -32,10 +32,12 @@
+ #define OPTION_GLIBC (DEFAULT_LIBC == LIBC_GLIBC)
+ #define OPTION_UCLIBC (DEFAULT_LIBC == LIBC_UCLIBC)
+ #define OPTION_BIONIC (DEFAULT_LIBC == LIBC_BIONIC)
++#define OPTION_MUSL (DEFAULT_LIBC == LIBC_MUSL)
+ #else
+ #define OPTION_GLIBC (linux_libc == LIBC_GLIBC)
+ #define OPTION_UCLIBC (linux_libc == LIBC_UCLIBC)
+ #define OPTION_BIONIC (linux_libc == LIBC_BIONIC)
++#define OPTION_MUSL (linux_libc == LIBC_MUSL)
+ #endif
+
+ #define GNU_USER_TARGET_OS_CPP_BUILTINS() \
+@@ -53,18 +55,21 @@
+ uClibc or Bionic is the default C library and whether
+ -muclibc or -mglibc or -mbionic has been passed to change the default. */
+
+-#define CHOOSE_DYNAMIC_LINKER1(LIBC1, LIBC2, LIBC3, LD1, LD2, LD3) \
+- "%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:" LD1 "}}"
++#define CHOOSE_DYNAMIC_LINKER1(LIBC1, LIBC2, LIBC3, LIBC4, LD1, LD2, LD3, LD4) \
++ "%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:%{" LIBC4 ":" LD4 ";:" LD1 "}}}"
+
+ #if DEFAULT_LIBC == LIBC_GLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
+- CHOOSE_DYNAMIC_LINKER1 ("mglibc", "muclibc", "mbionic", G, U, B)
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("mglibc", "muclibc", "mbionic", "mmusl", G, U, B, M)
+ #elif DEFAULT_LIBC == LIBC_UCLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
+- CHOOSE_DYNAMIC_LINKER1 ("muclibc", "mglibc", "mbionic", U, G, B)
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("muclibc", "mglibc", "mbionic", "mmusl", U, G, B, M)
+ #elif DEFAULT_LIBC == LIBC_BIONIC
+-#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
+- CHOOSE_DYNAMIC_LINKER1 ("mbionic", "mglibc", "muclibc", B, G, U)
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("mbionic", "mglibc", "muclibc", "mmusl", B, G, U, M)
++#elif DEFAULT_LIBC == LIBC_MUSL
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("mmusl", "mglibc", "muclibc", "mbionic", M, G, U, B)
+ #else
+ #error "Unsupported DEFAULT_LIBC"
+ #endif /* DEFAULT_LIBC */
+@@ -82,23 +87,32 @@
+ #define BIONIC_DYNAMIC_LINKER64 "/system/bin/linker64"
+ #define BIONIC_DYNAMIC_LINKERX32 "/system/bin/linkerx32"
+
++/* Musl dynamic linker paths must be defined on a per-architecture
++ basis, for each architecture supported by Musl. However, in order
++ to let other architectures continue to build with other C
++ libraries, we provide a dummy definition of the following defines. */
++#define MUSL_DYNAMIC_LINKER "invalid"
++#define MUSL_DYNAMIC_LINKER32 "invalid"
++#define MUSL_DYNAMIC_LINKER64 "invalid"
++#define MUSL_DYNAMIC_LINKERX32 "invalid"
++
+ #define GNU_USER_DYNAMIC_LINKER \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER, \
+- BIONIC_DYNAMIC_LINKER)
++ BIONIC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER)
+ #define GNU_USER_DYNAMIC_LINKER32 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32, \
+- BIONIC_DYNAMIC_LINKER32)
++ BIONIC_DYNAMIC_LINKER32, MUSL_DYNAMIC_LINKER32)
+ #define GNU_USER_DYNAMIC_LINKER64 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, \
+- BIONIC_DYNAMIC_LINKER64)
++ BIONIC_DYNAMIC_LINKER64, MUSL_DYNAMIC_LINKER64)
+ #define GNU_USER_DYNAMIC_LINKERX32 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERX32, UCLIBC_DYNAMIC_LINKERX32, \
+- BIONIC_DYNAMIC_LINKERX32)
++ BIONIC_DYNAMIC_LINKERX32, MUSL_DYNAMIC_LINKERX32)
+
+ /* Determine whether the entire c99 runtime
+ is present in the runtime library. */
+ #undef TARGET_C99_FUNCTIONS
+-#define TARGET_C99_FUNCTIONS (OPTION_GLIBC)
++#define TARGET_C99_FUNCTIONS (OPTION_GLIBC || OPTION_MUSL)
+
+ /* Whether we have sincos that follows the GNU extension. */
+ #undef TARGET_HAS_SINCOS
+@@ -107,3 +121,74 @@
+ /* Whether we have Bionic libc runtime */
+ #undef TARGET_HAS_BIONIC
+ #define TARGET_HAS_BIONIC (OPTION_BIONIC)
++
++/* musl avoids problematic includes by rearranging the include directories.
++ * Unfortunately, this is mostly duplicated from cppdefault.c */
++#if DEFAULT_LIBC == LIBC_MUSL
++#define INCLUDE_DEFAULTS_MUSL_GPP \
++ { GPLUSPLUS_INCLUDE_DIR, "G++", 1, 1, \
++ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 }, \
++ { GPLUSPLUS_TOOL_INCLUDE_DIR, "G++", 1, 1, \
++ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 1 }, \
++ { GPLUSPLUS_BACKWARD_INCLUDE_DIR, "G++", 1, 1, \
++ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 },
++
++#ifdef LOCAL_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_LOCAL \
++ { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 2 }, \
++ { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 0 },
++#else
++#define INCLUDE_DEFAULTS_MUSL_LOCAL
++#endif
++
++#ifdef PREFIX_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_PREFIX \
++ { PREFIX_INCLUDE_DIR, 0, 0, 1, 0, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_PREFIX
++#endif
++
++#ifdef CROSS_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_CROSS \
++ { CROSS_INCLUDE_DIR, "GCC", 0, 0, 0, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_CROSS
++#endif
++
++#ifdef TOOL_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_TOOL \
++ { TOOL_INCLUDE_DIR, "BINUTILS", 0, 1, 0, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_TOOL
++#endif
++
++#ifdef NATIVE_SYSTEM_HEADER_DIR
++#define INCLUDE_DEFAULTS_MUSL_NATIVE \
++ { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 2 }, \
++ { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 0 },
++#else
++#define INCLUDE_DEFAULTS_MUSL_NATIVE
++#endif
++
++#if defined (CROSS_DIRECTORY_STRUCTURE) && !defined (TARGET_SYSTEM_ROOT)
++# undef INCLUDE_DEFAULTS_MUSL_LOCAL
++# define INCLUDE_DEFAULTS_MUSL_LOCAL
++# undef INCLUDE_DEFAULTS_MUSL_NATIVE
++# define INCLUDE_DEFAULTS_MUSL_NATIVE
++#else
++# undef INCLUDE_DEFAULTS_MUSL_CROSS
++# define INCLUDE_DEFAULTS_MUSL_CROSS
++#endif
++
++#undef INCLUDE_DEFAULTS
++#define INCLUDE_DEFAULTS \
++ { \
++ INCLUDE_DEFAULTS_MUSL_GPP \
++ INCLUDE_DEFAULTS_MUSL_PREFIX \
++ INCLUDE_DEFAULTS_MUSL_CROSS \
++ INCLUDE_DEFAULTS_MUSL_TOOL \
++ INCLUDE_DEFAULTS_MUSL_NATIVE \
++ { GCC_INCLUDE_DIR, "GCC", 0, 1, 0, 0 }, \
++ { 0, 0, 0, 0, 0, 0 } \
++ }
++#endif
+Index: b/gcc/config/linux.opt
+===================================================================
+--- a/gcc/config/linux.opt
++++ b/gcc/config/linux.opt
+@@ -30,3 +30,7 @@
+ muclibc
+ Target Report RejectNegative Var(linux_libc,LIBC_UCLIBC) Negative(mbionic)
+ Use uClibc C library
++
++mmusl
++Target Report RejectNegative Var(linux_libc,LIBC_MUSL) Negative(mglibc)
++Use musl C library
+Index: b/gcc/config/microblaze/linux.h
+===================================================================
+--- a/gcc/config/microblaze/linux.h
++++ b/gcc/config/microblaze/linux.h
+@@ -25,7 +25,23 @@
+ #undef TLS_NEEDS_GOT
+ #define TLS_NEEDS_GOT 1
+
+-#define DYNAMIC_LINKER "/lib/ld.so.1"
++#if TARGET_BIG_ENDIAN_DEFAULT == 0 /* LE */
++#define MUSL_DYNAMIC_LINKER_E "%{EB:;:el}"
++#else
++#define MUSL_DYNAMIC_LINKER_E "%{EL:el}"
++#endif
++
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-microblaze" MUSL_DYNAMIC_LINKER_E ".so.1"
++#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
++
++#if DEFAULT_LIBC == LIBC_MUSL
++#define DYNAMIC_LINKER MUSL_DYNAMIC_LINKER
++#else
++#define DYNAMIC_LINKER GLIBC_DYNAMIC_LINKER
++#endif
++
++
+ #undef SUBTARGET_EXTRA_SPECS
+ #define SUBTARGET_EXTRA_SPECS \
+ { "dynamic_linker", DYNAMIC_LINKER }
+Index: b/gcc/config/microblaze/microblaze.h
+===================================================================
+--- a/gcc/config/microblaze/microblaze.h
++++ b/gcc/config/microblaze/microblaze.h
+@@ -213,6 +213,12 @@
+ #define STRICT_ALIGNMENT 1
+ #define PCC_BITFIELD_TYPE_MATTERS 1
+
++#undef SIZE_TYPE
++#define SIZE_TYPE "unsigned int"
++
++#undef PTRDIFF_TYPE
++#define PTRDIFF_TYPE "int"
++
+ #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
+ ((TREE_CODE (EXP) == STRING_CST || TREE_CODE (EXP) == CONSTRUCTOR) \
+ && (ALIGN) < BITS_PER_WORD \
+Index: b/gcc/config/mips/linux.h
+===================================================================
+--- a/gcc/config/mips/linux.h
++++ b/gcc/config/mips/linux.h
+@@ -18,3 +18,11 @@
+ <http://www.gnu.org/licenses/>. */
+
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
++
++#if TARGET_ENDIAN_DEFAULT == 0 /* LE */
++#define MUSL_DYNAMIC_LINKER_E "%{EB:;:el}"
++#else
++#define MUSL_DYNAMIC_LINKER_E "%{EL:el}"
++#endif
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-mips" MUSL_DYNAMIC_LINKER_E ".so.1"
+Index: b/gcc/config/rs6000/linux64.h
+===================================================================
+--- a/gcc/config/rs6000/linux64.h
++++ b/gcc/config/rs6000/linux64.h
+@@ -354,17 +354,23 @@
+ #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld64.so.1"
+ #define UCLIBC_DYNAMIC_LINKER32 "/lib/ld-uClibc.so.0"
+ #define UCLIBC_DYNAMIC_LINKER64 "/lib/ld64-uClibc.so.0"
++#undef MUSL_DYNAMIC_LINKER32
++#define MUSL_DYNAMIC_LINKER32 "/lib/ld-musl-powerpc.so.1"
++#undef MUSL_DYNAMIC_LINKER64
++#define MUSL_DYNAMIC_LINKER64 "/lib/ld-musl-powerpc64.so.1"
+ #if DEFAULT_LIBC == LIBC_UCLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{mmusl:" M ";:" U "}}"
+ #elif DEFAULT_LIBC == LIBC_GLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:" U ";:" G "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{muclibc:" U ";:%{mmusl:" M ";:" G "}}"
++#elif DEFAULT_LIBC == LIBC_MUSL
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{muclibc:" U ";:" M "}}"
+ #else
+ #error "Unsupported DEFAULT_LIBC"
+ #endif
+ #define GNU_USER_DYNAMIC_LINKER32 \
+- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32)
++ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32, MUSL_DYNAMIC_LINKER32)
+ #define GNU_USER_DYNAMIC_LINKER64 \
+- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64)
++ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, MUSL_DYNAMIC_LINKER64)
+
+ #undef DEFAULT_ASM_ENDIAN
+ #if (TARGET_DEFAULT & MASK_LITTLE_ENDIAN)
+Index: b/gcc/config/rs6000/secureplt.h
+===================================================================
+--- a/gcc/config/rs6000/secureplt.h
++++ b/gcc/config/rs6000/secureplt.h
+@@ -18,3 +18,4 @@
+ <http://www.gnu.org/licenses/>. */
+
+ #define CC1_SECURE_PLT_DEFAULT_SPEC "-msecure-plt"
++#define LINK_SECURE_PLT_DEFAULT_SPEC "--secure-plt"
+Index: b/gcc/config/rs6000/sysv4.h
+===================================================================
+--- a/gcc/config/rs6000/sysv4.h
++++ b/gcc/config/rs6000/sysv4.h
+@@ -550,6 +550,9 @@
+ #ifndef CC1_SECURE_PLT_DEFAULT_SPEC
+ #define CC1_SECURE_PLT_DEFAULT_SPEC ""
+ #endif
++#ifndef LINK_SECURE_PLT_DEFAULT_SPEC
++#define LINK_SECURE_PLT_DEFAULT_SPEC ""
++#endif
+
+ /* Pass -G xxx to the compiler and set correct endian mode. */
+ #define CC1_SPEC "%{G*} %(cc1_cpu)" \
+@@ -600,7 +603,8 @@
+
+ /* Override the default target of the linker. */
+ #define LINK_TARGET_SPEC \
+- ENDIAN_SELECT("", " --oformat elf32-powerpcle", "")
++ ENDIAN_SELECT("", " --oformat elf32-powerpcle", "") \
++ "%{!mbss-plt: %{!msecure-plt: %(link_secure_plt_default)}}"
+
+ /* Any specific OS flags. */
+ #define LINK_OS_SPEC "\
+@@ -778,15 +782,18 @@
+
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
+ #define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-powerpc.so.1"
+ #if DEFAULT_LIBC == LIBC_UCLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{mmusl:" M ";:" U "}}"
++#elif DEFAULT_LIBC == LIBC_MUSL
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{muclibc:" U ";:" M "}}"
+ #elif !defined (DEFAULT_LIBC) || DEFAULT_LIBC == LIBC_GLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:" U ";:" G "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{muclibc:" U ";:%{mmusl:" M ";:" G "}}"
+ #else
+ #error "Unsupported DEFAULT_LIBC"
+ #endif
+ #define GNU_USER_DYNAMIC_LINKER \
+- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
++ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER)
+
+ #define LINK_OS_LINUX_SPEC "-m elf32ppclinux %{!shared: %{!static: \
+ %{rdynamic:-export-dynamic} \
+@@ -912,6 +919,7 @@
+ { "cc1_endian_little", CC1_ENDIAN_LITTLE_SPEC }, \
+ { "cc1_endian_default", CC1_ENDIAN_DEFAULT_SPEC }, \
+ { "cc1_secure_plt_default", CC1_SECURE_PLT_DEFAULT_SPEC }, \
++ { "link_secure_plt_default", LINK_SECURE_PLT_DEFAULT_SPEC }, \
+ { "cpp_os_ads", CPP_OS_ADS_SPEC }, \
+ { "cpp_os_yellowknife", CPP_OS_YELLOWKNIFE_SPEC }, \
+ { "cpp_os_mvme", CPP_OS_MVME_SPEC }, \
+Index: b/gcc/config/sh/linux.h
+===================================================================
+--- a/gcc/config/sh/linux.h
++++ b/gcc/config/sh/linux.h
+@@ -43,7 +43,15 @@
+
+ #define TARGET_ASM_FILE_END file_end_indicate_exec_stack
+
++#if TARGET_BIG_ENDIAN_DEFAULT /* BE */
++#define MUSL_DYNAMIC_LINKER_E "eb"
++#else
++#define MUSL_DYNAMIC_LINKER_E
++#endif
++
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-sh" MUSL_DYNAMIC_LINKER_E ".so.1"
+
+ #undef SUBTARGET_LINK_EMUL_SUFFIX
+ #define SUBTARGET_LINK_EMUL_SUFFIX "_linux"
+Index: b/gcc/config/sh/sh.c
+===================================================================
+--- a/gcc/config/sh/sh.c
++++ b/gcc/config/sh/sh.c
+@@ -22,8 +22,17 @@
+ /* FIXME: This is a temporary hack, so that we can include <algorithm>
+ below. <algorithm> will try to include <cstdlib> which will reference
+ malloc & co, which are poisoned by "system.h". The proper solution is
+- to include <cstdlib> in "system.h" instead of <stdlib.h>. */
++ to include <cstdlib> in "system.h" instead of <stdlib.h>.
++ It's also a temporary hack as the inclusion of sstream will cause inclusion
++ of libc's pthread.h (istream->ios->ios_base->atomicity->gth->gthr-default)
++ which in turn includes sched.h, which defines the CPU_ALLOC, which uses
++ the poisoned calloc. the proper fix would be to shield the poison pragmas
++ with some define that is only set when gcc developers do testing.
++*/
+ #include <cstdlib>
++#include <sstream>
++#include <vector>
++#include <algorithm>
+
+ #include "config.h"
+ #include "system.h"
+@@ -60,10 +69,6 @@
+ #include "tm-constrs.h"
+ #include "opts.h"
+
+-#include <sstream>
+-#include <vector>
+-#include <algorithm>
+-
+ int code_for_indirect_jump_scratch = CODE_FOR_indirect_jump_scratch;
+
+ #define MSW (TARGET_LITTLE_ENDIAN ? 1 : 0)
+Index: b/gcc/configure
+===================================================================
+--- a/gcc/configure
++++ b/gcc/configure
+@@ -26739,6 +26739,9 @@
+ else
+ gcc_cv_libc_provides_ssp=no
+ case "$target" in
++ *-*-musl*)
++ # All versions of musl provide stack protector
++ gcc_cv_libc_provides_ssp=yes;;
+ *-*-linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
+ # glibc 2.4 and later provides __stack_chk_fail and
+ # either __stack_chk_guard, or TLS access to stack guard canary.
+@@ -26772,6 +26775,7 @@
+ # <http://gcc.gnu.org/ml/gcc/2008-10/msg00130.html>) and for now
+ # simply assert that glibc does provide this, which is true for all
+ # realistically usable GNU/Hurd configurations.
++ # All supported versions of musl provide it as well
+ gcc_cv_libc_provides_ssp=yes;;
+ *-*-darwin* | *-*-freebsd*)
+ ac_fn_c_check_func "$LINENO" "__stack_chk_fail" "ac_cv_func___stack_chk_fail"
+@@ -26854,6 +26858,9 @@
+ gcc_cv_target_dl_iterate_phdr=no
+ fi
+ ;;
++ *-linux-musl*)
++ gcc_cv_target_dl_iterate_phdr=yes
++ ;;
+ esac
+
+ if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
+Index: b/gcc/configure.ac
+===================================================================
+--- a/gcc/configure.ac
++++ b/gcc/configure.ac
+@@ -4722,6 +4722,9 @@
+ gcc_cv_libc_provides_ssp,
+ [gcc_cv_libc_provides_ssp=no
+ case "$target" in
++ *-*-musl*)
++ # All versions of musl provide stack protector
++ gcc_cv_libc_provides_ssp=yes;;
+ *-*-linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
+ [# glibc 2.4 and later provides __stack_chk_fail and
+ # either __stack_chk_guard, or TLS access to stack guard canary.
+@@ -4755,6 +4758,7 @@
+ # <http://gcc.gnu.org/ml/gcc/2008-10/msg00130.html>) and for now
+ # simply assert that glibc does provide this, which is true for all
+ # realistically usable GNU/Hurd configurations.
++ # All supported versions of musl provide it as well
+ gcc_cv_libc_provides_ssp=yes;;
+ *-*-darwin* | *-*-freebsd*)
+ AC_CHECK_FUNC(__stack_chk_fail,[gcc_cv_libc_provides_ssp=yes],
+@@ -4820,6 +4824,9 @@
+ gcc_cv_target_dl_iterate_phdr=no
+ fi
+ ;;
++ *-linux-musl*)
++ gcc_cv_target_dl_iterate_phdr=yes
++ ;;
+ esac
+ GCC_TARGET_TEMPLATE([TARGET_DL_ITERATE_PHDR])
+ if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
+Index: b/gcc/ginclude/stddef.h
+===================================================================
+--- a/gcc/ginclude/stddef.h
++++ b/gcc/ginclude/stddef.h
+@@ -181,6 +181,7 @@
+ #ifndef _GCC_SIZE_T
+ #ifndef _SIZET_
+ #ifndef __size_t
++#ifndef __DEFINED_size_t /* musl */
+ #define __size_t__ /* BeOS */
+ #define __SIZE_T__ /* Cray Unicos/Mk */
+ #define _SIZE_T
+@@ -197,6 +198,7 @@
+ #define ___int_size_t_h
+ #define _GCC_SIZE_T
+ #define _SIZET_
++#define __DEFINED_size_t /* musl */
+ #if (defined (__FreeBSD__) && (__FreeBSD__ >= 5)) \
+ || defined(__FreeBSD_kernel__)
+ /* __size_t is a typedef on FreeBSD 5, must not trash it. */
+@@ -214,6 +216,7 @@
+ typedef long ssize_t;
+ #endif /* __BEOS__ */
+ #endif /* !(defined (__GNUG__) && defined (size_t)) */
++#endif /* __DEFINED_size_t */
+ #endif /* __size_t */
+ #endif /* _SIZET_ */
+ #endif /* _GCC_SIZE_T */
+Index: b/libgcc/unwind-dw2-fde-dip.c
+===================================================================
+--- a/libgcc/unwind-dw2-fde-dip.c
++++ b/libgcc/unwind-dw2-fde-dip.c
+@@ -46,33 +46,13 @@
+ #include "unwind-compat.h"
+ #include "gthr.h"
+
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ > 2) \
+- || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 2 && defined(DT_CONFIG)))
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(__BIONIC__)
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(__FreeBSD__) && __FreeBSD__ >= 7
+-# define ElfW __ElfN
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(__OpenBSD__)
+-# define ElfW(type) Elf_##type
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(TARGET_DL_ITERATE_PHDR) \
+- && defined(__sun__) && defined(__svr4__)
++#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) && defined(TARGET_DL_ITERATE_PHDR)
+ # define USE_PT_GNU_EH_FRAME
++# ifdef __OpenBSD__
++# define ElfW(type) Elf_##type
++# elif defined(__FreeBSD__) && __FreeBSD__ >= 7
++# define ElfW __ElfN
++# endif
+ #endif
+
+ #if defined(USE_PT_GNU_EH_FRAME)
+Index: b/libgomp/config/posix/time.c
+===================================================================
+--- a/libgomp/config/posix/time.c
++++ b/libgomp/config/posix/time.c
+@@ -28,6 +28,8 @@
+ The following implementation uses the most simple POSIX routines.
+ If present, POSIX 4 clocks should be used instead. */
+
++#define _POSIX_C_SOURCE 199309L /* for clocks */
++
+ #include "libgomp.h"
+ #include <unistd.h>
+ #if TIME_WITH_SYS_TIME
+Index: b/libitm/config/arm/hwcap.cc
+===================================================================
+--- a/libitm/config/arm/hwcap.cc
++++ b/libitm/config/arm/hwcap.cc
+@@ -40,7 +40,11 @@
+
+ #ifdef __linux__
+ #include <unistd.h>
++#ifdef __GLIBC__
+ #include <sys/fcntl.h>
++#else
++#include <fcntl.h>
++#endif
+ #include <elf.h>
+
+ static void __attribute__((constructor))
+Index: b/libitm/config/linux/x86/tls.h
+===================================================================
+--- a/libitm/config/linux/x86/tls.h
++++ b/libitm/config/linux/x86/tls.h
+@@ -25,16 +25,19 @@
+ #ifndef LIBITM_X86_TLS_H
+ #define LIBITM_X86_TLS_H 1
+
+-#if defined(__GLIBC_PREREQ) && __GLIBC_PREREQ(2, 10)
++#if defined(__GLIBC_PREREQ)
++#if __GLIBC_PREREQ(2, 10)
+ /* Use slots in the TCB head rather than __thread lookups.
+ GLIBC has reserved words 10 through 13 for TM. */
+ #define HAVE_ARCH_GTM_THREAD 1
+ #define HAVE_ARCH_GTM_THREAD_DISP 1
+ #endif
++#endif
+
+ #include "config/generic/tls.h"
+
+-#if defined(__GLIBC_PREREQ) && __GLIBC_PREREQ(2, 10)
++#if defined(__GLIBC_PREREQ)
++#if __GLIBC_PREREQ(2, 10)
+ namespace GTM HIDDEN {
+
+ #ifdef __x86_64__
+@@ -101,5 +104,6 @@
+
+ } // namespace GTM
+ #endif /* >= GLIBC 2.10 */
++#endif
+
+ #endif // LIBITM_X86_TLS_H
+Index: b/libstdc++-v3/configure.host
+===================================================================
+--- a/libstdc++-v3/configure.host
++++ b/libstdc++-v3/configure.host
+@@ -264,6 +264,13 @@
+ os_include_dir="os/bsd/freebsd"
+ ;;
+ gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu)
++ # check for musl by target
++ case "${host_os}" in
++ *-musl*)
++ os_include_dir="os/generic"
++ ;;
++ *)
++
+ if [ "$uclibc" = "yes" ]; then
+ os_include_dir="os/uclibc"
+ elif [ "$bionic" = "yes" ]; then
+@@ -272,6 +279,9 @@
+ os_include_dir="os/gnu-linux"
+ fi
+ ;;
++
++ esac
++ ;;
+ hpux*)
+ os_include_dir="os/hpux"
+ ;;
+Index: b/gcc/config/mips/linux64.h
+===================================================================
+--- a/gcc/config/mips/linux64.h
++++ b/gcc/config/mips/linux64.h
+@@ -29,4 +29,4 @@
+ #define BIONIC_DYNAMIC_LINKERN32 "/system/bin/linker32"
+ #define GNU_USER_DYNAMIC_LINKERN32 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERN32, UCLIBC_DYNAMIC_LINKERN32, \
+- BIONIC_DYNAMIC_LINKERN32)
++ BIONIC_DYNAMIC_LINKERN32, MUSL_DYNAMIC_LINKER)
--
1.9.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 04/10] gcc: add musl support patch to gcc 4.9.0
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
` (2 preceding siblings ...)
2014-05-05 21:17 ` [Buildroot] [PATCHv2 03/10] gcc: add musl support patch to gcc 4.8.2 Thomas Petazzoni
@ 2014-05-05 21:17 ` Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 05/10] gcc: musl patches only available for gcc 4.7+ Thomas Petazzoni
` (6 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/gcc/4.9.0/900-musl-support.patch | 710 +++++++++++++++++++++++++++++++
1 file changed, 710 insertions(+)
create mode 100644 package/gcc/4.9.0/900-musl-support.patch
diff --git a/package/gcc/4.9.0/900-musl-support.patch b/package/gcc/4.9.0/900-musl-support.patch
new file mode 100644
index 0000000..958940e
--- /dev/null
+++ b/package/gcc/4.9.0/900-musl-support.patch
@@ -0,0 +1,710 @@
+Add musl support to gcc
+
+This patch comes from the musl-cross project at
+https://bitbucket.org/GregorR/musl-cross/src. Compared to the upstream version:
+
+ * the config.sub modifications have been removed, because Buildroot
+ already overwrites all config.sub with a more recent config.sub
+ that has musl support.
+
+ * change to ensure that a dummy dynamic linker path
+ MUSL_DYNAMIC_LINKER<foo> is defined for all architectures,
+ otherwise building gcc for architectures not supported by musl was
+ causing build failure. Bug reported upstream at
+ https://bitbucket.org/GregorR/musl-gcc-patches/issue/4/musl-gcc-patches-break-the-build-on.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+
+Index: b/fixincludes/mkfixinc.sh
+===================================================================
+--- a/fixincludes/mkfixinc.sh
++++ b/fixincludes/mkfixinc.sh
+@@ -19,7 +19,8 @@
+ powerpc-*-eabi* | \
+ powerpc-*-rtems* | \
+ powerpcle-*-eabisim* | \
+- powerpcle-*-eabi* )
++ powerpcle-*-eabi* | \
++ *-musl* )
+ # IF there is no include fixing,
+ # THEN create a no-op fixer and exit
+ (echo "#! /bin/sh" ; echo "exit 0" ) > ${target}
+Index: b/gcc/config.gcc
+===================================================================
+--- a/gcc/config.gcc
++++ b/gcc/config.gcc
+@@ -594,7 +594,7 @@
+ esac
+
+ # Common C libraries.
+-tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
++tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4"
+
+ # 32-bit x86 processors supported by --with-arch=. Each processor
+ # MUST be separated by exactly one space.
+@@ -719,6 +719,9 @@
+ *-*-*uclibc*)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
+ ;;
++ *-*-*musl*)
++ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL"
++ ;;
+ *)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
+ ;;
+@@ -2323,6 +2326,10 @@
+ powerpc*-*-linux*paired*)
+ tm_file="${tm_file} rs6000/750cl.h" ;;
+ esac
++ case ${target} in
++ *-linux*-musl*)
++ enable_secureplt=yes ;;
++ esac
+ if test x${enable_secureplt} = xyes; then
+ tm_file="rs6000/secureplt.h ${tm_file}"
+ fi
+Index: b/gcc/config/aarch64/aarch64-linux.h
+===================================================================
+--- a/gcc/config/aarch64/aarch64-linux.h
++++ b/gcc/config/aarch64/aarch64-linux.h
+@@ -22,6 +22,8 @@
+ #define GCC_AARCH64_LINUX_H
+
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux-aarch64%{mbig-endian:_be}.so.1"
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-aarch64.so.1"
+
+ #define CPP_SPEC "%{pthread:-D_REENTRANT}"
+
+Index: b/gcc/config/arm/linux-eabi.h
+===================================================================
+--- a/gcc/config/arm/linux-eabi.h
++++ b/gcc/config/arm/linux-eabi.h
+@@ -77,6 +77,23 @@
+ %{mfloat-abi=soft*:" GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "} \
+ %{!mfloat-abi=*:" GLIBC_DYNAMIC_LINKER_DEFAULT "}"
+
++/* For ARM musl currently supports four dynamic linkers:
++ - ld-musl-arm.so.1 - for the EABI-derived soft-float ABI
++ - ld-musl-armhf.so.1 - for the EABI-derived hard-float ABI
++ - ld-musl-armeb.so.1 - for the EABI-derived soft-float ABI, EB
++ - ld-musl-armebhf.so.1 - for the EABI-derived hard-float ABI, EB
++ musl does not support the legacy OABI mode.
++ All the dynamic linkers live in /lib.
++ We default to soft-float, EL. */
++#undef MUSL_DYNAMIC_LINKER
++#if TARGET_BIG_ENDIAN_DEFAULT
++#define MUSL_DYNAMIC_LINKER_E "%{mlittle-endian:;:eb}"
++#else
++#define MUSL_DYNAMIC_LINKER_E "%{mbig-endian:eb}"
++#endif
++#define MUSL_DYNAMIC_LINKER \
++ "/lib/ld-musl-arm" MUSL_DYNAMIC_LINKER_E "%{mfloat-abi=hard:hf}.so.1"
++
+ /* At this point, bpabi.h will have clobbered LINK_SPEC. We want to
+ use the GNU/Linux version, not the generic BPABI version. */
+ #undef LINK_SPEC
+Index: b/gcc/config/i386/linux.h
+===================================================================
+--- a/gcc/config/i386/linux.h
++++ b/gcc/config/i386/linux.h
+@@ -21,3 +21,5 @@
+
+ #define GNU_USER_LINK_EMULATION "elf_i386"
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-i386.so.1"
+Index: b/gcc/config/i386/linux64.h
+===================================================================
+--- a/gcc/config/i386/linux64.h
++++ b/gcc/config/i386/linux64.h
+@@ -30,3 +30,10 @@
+ #define GLIBC_DYNAMIC_LINKER32 "/lib/ld-linux.so.2"
+ #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
+ #define GLIBC_DYNAMIC_LINKERX32 "/libx32/ld-linux-x32.so.2"
++
++#undef MUSL_DYNAMIC_LINKER32
++#define MUSL_DYNAMIC_LINKER32 "/lib/ld-musl-i386.so.1"
++#undef MUSL_DYNAMIC_LINKER64
++#define MUSL_DYNAMIC_LINKER64 "/lib/ld-musl-x86_64.so.1"
++#undef MUSL_DYNAMIC_LINKERX32
++#define MUSL_DYNAMIC_LINKERX32 "/lib/ld-musl-x32.so.1"
+Index: b/gcc/config/linux.h
+===================================================================
+--- a/gcc/config/linux.h
++++ b/gcc/config/linux.h
+@@ -32,10 +32,12 @@
+ #define OPTION_GLIBC (DEFAULT_LIBC == LIBC_GLIBC)
+ #define OPTION_UCLIBC (DEFAULT_LIBC == LIBC_UCLIBC)
+ #define OPTION_BIONIC (DEFAULT_LIBC == LIBC_BIONIC)
++#define OPTION_MUSL (DEFAULT_LIBC == LIBC_MUSL)
+ #else
+ #define OPTION_GLIBC (linux_libc == LIBC_GLIBC)
+ #define OPTION_UCLIBC (linux_libc == LIBC_UCLIBC)
+ #define OPTION_BIONIC (linux_libc == LIBC_BIONIC)
++#define OPTION_MUSL (linux_libc == LIBC_MUSL)
+ #endif
+
+ #define GNU_USER_TARGET_OS_CPP_BUILTINS() \
+@@ -53,18 +55,21 @@
+ uClibc or Bionic is the default C library and whether
+ -muclibc or -mglibc or -mbionic has been passed to change the default. */
+
+-#define CHOOSE_DYNAMIC_LINKER1(LIBC1, LIBC2, LIBC3, LD1, LD2, LD3) \
+- "%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:" LD1 "}}"
++#define CHOOSE_DYNAMIC_LINKER1(LIBC1, LIBC2, LIBC3, LIBC4, LD1, LD2, LD3, LD4) \
++ "%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:%{" LIBC4 ":" LD4 ";:" LD1 "}}}"
+
+ #if DEFAULT_LIBC == LIBC_GLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
+- CHOOSE_DYNAMIC_LINKER1 ("mglibc", "muclibc", "mbionic", G, U, B)
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("mglibc", "muclibc", "mbionic", "mmusl", G, U, B, M)
+ #elif DEFAULT_LIBC == LIBC_UCLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
+- CHOOSE_DYNAMIC_LINKER1 ("muclibc", "mglibc", "mbionic", U, G, B)
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("muclibc", "mglibc", "mbionic", "mmusl", U, G, B, M)
+ #elif DEFAULT_LIBC == LIBC_BIONIC
+-#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
+- CHOOSE_DYNAMIC_LINKER1 ("mbionic", "mglibc", "muclibc", B, G, U)
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("mbionic", "mglibc", "muclibc", "mmusl", B, G, U, M)
++#elif DEFAULT_LIBC == LIBC_MUSL
++#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
++ CHOOSE_DYNAMIC_LINKER1 ("mmusl", "mglibc", "muclibc", "mbionic", M, G, U, B)
+ #else
+ #error "Unsupported DEFAULT_LIBC"
+ #endif /* DEFAULT_LIBC */
+@@ -82,23 +87,103 @@
+ #define BIONIC_DYNAMIC_LINKER64 "/system/bin/linker64"
+ #define BIONIC_DYNAMIC_LINKERX32 "/system/bin/linkerx32"
+
++/* Musl dynamic linker paths must be defined on a per-architecture
++ basis, for each architecture supported by Musl. However, in order
++ to let other architectures continue to build with other C
++ libraries, we provide a dummy definition of the following defines. */
++#define MUSL_DYNAMIC_LINKER "invalid"
++#define MUSL_DYNAMIC_LINKER32 "invalid"
++#define MUSL_DYNAMIC_LINKER64 "invalid"
++#define MUSL_DYNAMIC_LINKERX32 "invalid"
++
+ #define GNU_USER_DYNAMIC_LINKER \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER, \
+- BIONIC_DYNAMIC_LINKER)
++ BIONIC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER)
+ #define GNU_USER_DYNAMIC_LINKER32 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32, \
+- BIONIC_DYNAMIC_LINKER32)
++ BIONIC_DYNAMIC_LINKER32, MUSL_DYNAMIC_LINKER32)
+ #define GNU_USER_DYNAMIC_LINKER64 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, \
+- BIONIC_DYNAMIC_LINKER64)
++ BIONIC_DYNAMIC_LINKER64, MUSL_DYNAMIC_LINKER64)
+ #define GNU_USER_DYNAMIC_LINKERX32 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERX32, UCLIBC_DYNAMIC_LINKERX32, \
+- BIONIC_DYNAMIC_LINKERX32)
++ BIONIC_DYNAMIC_LINKERX32, MUSL_DYNAMIC_LINKER32)
+
+ /* Whether we have Bionic libc runtime */
+ #undef TARGET_HAS_BIONIC
+ #define TARGET_HAS_BIONIC (OPTION_BIONIC)
+
++/* musl avoids problematic includes by rearranging the include directories.
++ * Unfortunately, this is mostly duplicated from cppdefault.c */
++#if DEFAULT_LIBC == LIBC_MUSL
++#define INCLUDE_DEFAULTS_MUSL_GPP \
++ { GPLUSPLUS_INCLUDE_DIR, "G++", 1, 1, \
++ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 }, \
++ { GPLUSPLUS_TOOL_INCLUDE_DIR, "G++", 1, 1, \
++ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 1 }, \
++ { GPLUSPLUS_BACKWARD_INCLUDE_DIR, "G++", 1, 1, \
++ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 },
++
++#ifdef LOCAL_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_LOCAL \
++ { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 2 }, \
++ { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 0 },
++#else
++#define INCLUDE_DEFAULTS_MUSL_LOCAL
++#endif
++
++#ifdef PREFIX_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_PREFIX \
++ { PREFIX_INCLUDE_DIR, 0, 0, 1, 0, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_PREFIX
++#endif
++
++#ifdef CROSS_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_CROSS \
++ { CROSS_INCLUDE_DIR, "GCC", 0, 0, 0, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_CROSS
++#endif
++
++#ifdef TOOL_INCLUDE_DIR
++#define INCLUDE_DEFAULTS_MUSL_TOOL \
++ { TOOL_INCLUDE_DIR, "BINUTILS", 0, 1, 0, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_TOOL
++#endif
++
++#ifdef NATIVE_SYSTEM_HEADER_DIR
++#define INCLUDE_DEFAULTS_MUSL_NATIVE \
++ { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 2 }, \
++ { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 0 },
++#else
++#define INCLUDE_DEFAULTS_MUSL_NATIVE
++#endif
++
++#if defined (CROSS_DIRECTORY_STRUCTURE) && !defined (TARGET_SYSTEM_ROOT)
++# undef INCLUDE_DEFAULTS_MUSL_LOCAL
++# define INCLUDE_DEFAULTS_MUSL_LOCAL
++# undef INCLUDE_DEFAULTS_MUSL_NATIVE
++# define INCLUDE_DEFAULTS_MUSL_NATIVE
++#else
++# undef INCLUDE_DEFAULTS_MUSL_CROSS
++# define INCLUDE_DEFAULTS_MUSL_CROSS
++#endif
++
++#undef INCLUDE_DEFAULTS
++#define INCLUDE_DEFAULTS \
++ { \
++ INCLUDE_DEFAULTS_MUSL_GPP \
++ INCLUDE_DEFAULTS_MUSL_PREFIX \
++ INCLUDE_DEFAULTS_MUSL_CROSS \
++ INCLUDE_DEFAULTS_MUSL_TOOL \
++ INCLUDE_DEFAULTS_MUSL_NATIVE \
++ { GCC_INCLUDE_DIR, "GCC", 0, 1, 0, 0 }, \
++ { 0, 0, 0, 0, 0, 0 } \
++ }
++#endif
++
+ #if (DEFAULT_LIBC == LIBC_UCLIBC) && defined (SINGLE_LIBC) /* uClinux */
+ /* This is a *uclinux* target. We don't define below macros to normal linux
+ versions, because doing so would require *uclinux* targets to include
+Index: b/gcc/config/linux.opt
+===================================================================
+--- a/gcc/config/linux.opt
++++ b/gcc/config/linux.opt
+@@ -30,3 +30,7 @@
+ muclibc
+ Target Report RejectNegative Var(linux_libc,LIBC_UCLIBC) Negative(mbionic)
+ Use uClibc C library
++
++mmusl
++Target Report RejectNegative Var(linux_libc,LIBC_MUSL) Negative(mglibc)
++Use musl C library
+Index: b/gcc/config/microblaze/linux.h
+===================================================================
+--- a/gcc/config/microblaze/linux.h
++++ b/gcc/config/microblaze/linux.h
+@@ -25,7 +25,23 @@
+ #undef TLS_NEEDS_GOT
+ #define TLS_NEEDS_GOT 1
+
+-#define DYNAMIC_LINKER "/lib/ld.so.1"
++#if TARGET_BIG_ENDIAN_DEFAULT == 0 /* LE */
++#define MUSL_DYNAMIC_LINKER_E "%{EB:;:el}"
++#else
++#define MUSL_DYNAMIC_LINKER_E "%{EL:el}"
++#endif
++
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-microblaze" MUSL_DYNAMIC_LINKER_E ".so.1"
++#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
++
++#if DEFAULT_LIBC == LIBC_MUSL
++#define DYNAMIC_LINKER MUSL_DYNAMIC_LINKER
++#else
++#define DYNAMIC_LINKER GLIBC_DYNAMIC_LINKER
++#endif
++
++
+ #undef SUBTARGET_EXTRA_SPECS
+ #define SUBTARGET_EXTRA_SPECS \
+ { "dynamic_linker", DYNAMIC_LINKER }
+Index: b/gcc/config/rs6000/linux64.h
+===================================================================
+--- a/gcc/config/rs6000/linux64.h
++++ b/gcc/config/rs6000/linux64.h
+@@ -375,17 +375,23 @@
+ #endif
+ #define UCLIBC_DYNAMIC_LINKER32 "/lib/ld-uClibc.so.0"
+ #define UCLIBC_DYNAMIC_LINKER64 "/lib/ld64-uClibc.so.0"
++#undef MUSL_DYNAMIC_LINKER32
++#define MUSL_DYNAMIC_LINKER32 "/lib/ld-musl-powerpc.so.1"
++#undef MUSL_DYNAMIC_LINKER64
++#define MUSL_DYNAMIC_LINKER64 "/lib/ld-musl-powerpc64.so.1"
+ #if DEFAULT_LIBC == LIBC_UCLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{mmusl:" M ";:" U "}}"
+ #elif DEFAULT_LIBC == LIBC_GLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:" U ";:" G "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{muclibc:" U ";:%{mmusl:" M ";:" G "}}"
++#elif DEFAULT_LIBC == LIBC_MUSL
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{muclibc:" U ";:" M "}}"
+ #else
+ #error "Unsupported DEFAULT_LIBC"
+ #endif
+ #define GNU_USER_DYNAMIC_LINKER32 \
+- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32)
++ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32, MUSL_DYNAMIC_LINKER32)
+ #define GNU_USER_DYNAMIC_LINKER64 \
+- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64)
++ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, MUSL_DYNAMIC_LINKER64)
+
+ #undef DEFAULT_ASM_ENDIAN
+ #if (TARGET_DEFAULT & MASK_LITTLE_ENDIAN)
+Index: b/gcc/config/rs6000/secureplt.h
+===================================================================
+--- a/gcc/config/rs6000/secureplt.h
++++ b/gcc/config/rs6000/secureplt.h
+@@ -18,3 +18,4 @@
+ <http://www.gnu.org/licenses/>. */
+
+ #define CC1_SECURE_PLT_DEFAULT_SPEC "-msecure-plt"
++#define LINK_SECURE_PLT_DEFAULT_SPEC "--secure-plt"
+Index: b/gcc/config/rs6000/sysv4.h
+===================================================================
+--- a/gcc/config/rs6000/sysv4.h
++++ b/gcc/config/rs6000/sysv4.h
+@@ -537,6 +537,9 @@
+ #ifndef CC1_SECURE_PLT_DEFAULT_SPEC
+ #define CC1_SECURE_PLT_DEFAULT_SPEC ""
+ #endif
++#ifndef LINK_SECURE_PLT_DEFAULT_SPEC
++#define LINK_SECURE_PLT_DEFAULT_SPEC ""
++#endif
+
+ /* Pass -G xxx to the compiler. */
+ #define CC1_SPEC "%{G*} %(cc1_cpu)" \
+@@ -585,7 +588,8 @@
+
+ /* Override the default target of the linker. */
+ #define LINK_TARGET_SPEC \
+- ENDIAN_SELECT("", " --oformat elf32-powerpcle", "")
++ ENDIAN_SELECT("", " --oformat elf32-powerpcle", "") \
++ "%{!mbss-plt: %{!msecure-plt: %(link_secure_plt_default)}}"
+
+ /* Any specific OS flags. */
+ #define LINK_OS_SPEC "\
+@@ -763,15 +767,18 @@
+
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
+ #define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-powerpc.so.1"
+ #if DEFAULT_LIBC == LIBC_UCLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{mmusl:" M ";:" U "}}"
++#elif DEFAULT_LIBC == LIBC_MUSL
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{muclibc:" U ";:" M "}}"
+ #elif !defined (DEFAULT_LIBC) || DEFAULT_LIBC == LIBC_GLIBC
+-#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:" U ";:" G "}"
++#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{muclibc:" U ";:%{mmusl:" M ";:" G "}}"
+ #else
+ #error "Unsupported DEFAULT_LIBC"
+ #endif
+ #define GNU_USER_DYNAMIC_LINKER \
+- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
++ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER)
+
+ #define LINK_OS_LINUX_SPEC "-m elf32ppclinux %{!shared: %{!static: \
+ %{rdynamic:-export-dynamic} \
+@@ -894,6 +901,7 @@
+ { "link_os_openbsd", LINK_OS_OPENBSD_SPEC }, \
+ { "link_os_default", LINK_OS_DEFAULT_SPEC }, \
+ { "cc1_secure_plt_default", CC1_SECURE_PLT_DEFAULT_SPEC }, \
++ { "link_secure_plt_default", LINK_SECURE_PLT_DEFAULT_SPEC }, \
+ { "cpp_os_ads", CPP_OS_ADS_SPEC }, \
+ { "cpp_os_yellowknife", CPP_OS_YELLOWKNIFE_SPEC }, \
+ { "cpp_os_mvme", CPP_OS_MVME_SPEC }, \
+Index: b/gcc/config/sh/linux.h
+===================================================================
+--- a/gcc/config/sh/linux.h
++++ b/gcc/config/sh/linux.h
+@@ -43,7 +43,15 @@
+
+ #define TARGET_ASM_FILE_END file_end_indicate_exec_stack
+
++#if TARGET_BIG_ENDIAN_DEFAULT /* BE */
++#define MUSL_DYNAMIC_LINKER_E "eb"
++#else
++#define MUSL_DYNAMIC_LINKER_E
++#endif
++
+ #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-sh" MUSL_DYNAMIC_LINKER_E ".so.1"
+
+ #undef SUBTARGET_LINK_EMUL_SUFFIX
+ #define SUBTARGET_LINK_EMUL_SUFFIX "_linux"
+Index: b/gcc/config/sh/sh.c
+===================================================================
+--- a/gcc/config/sh/sh.c
++++ b/gcc/config/sh/sh.c
+@@ -70,10 +70,6 @@
+ #include "pass_manager.h"
+ #include "context.h"
+
+-#include <sstream>
+-#include <vector>
+-#include <algorithm>
+-
+ int code_for_indirect_jump_scratch = CODE_FOR_indirect_jump_scratch;
+
+ /* These are some macros to abstract register modes. */
+Index: b/gcc/configure
+===================================================================
+--- a/gcc/configure
++++ b/gcc/configure
+@@ -27300,6 +27300,9 @@
+ else
+ gcc_cv_libc_provides_ssp=no
+ case "$target" in
++ *-*-musl*)
++ # All versions of musl provide stack protector
++ gcc_cv_libc_provides_ssp=yes;;
+ *-*-linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
+ # glibc 2.4 and later provides __stack_chk_fail and
+ # either __stack_chk_guard, or TLS access to stack guard canary.
+@@ -27332,6 +27335,7 @@
+ # <http://gcc.gnu.org/ml/gcc/2008-10/msg00130.html>) and for now
+ # simply assert that glibc does provide this, which is true for all
+ # realistically usable GNU/Hurd configurations.
++ # All supported versions of musl provide it as well
+ gcc_cv_libc_provides_ssp=yes;;
+ *-*-darwin* | *-*-freebsd*)
+ ac_fn_c_check_func "$LINENO" "__stack_chk_fail" "ac_cv_func___stack_chk_fail"
+@@ -27421,6 +27425,9 @@
+ gcc_cv_target_dl_iterate_phdr=no
+ fi
+ ;;
++ *-linux-musl*)
++ gcc_cv_target_dl_iterate_phdr=yes
++ ;;
+ esac
+
+ if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
+Index: b/gcc/configure.ac
+===================================================================
+--- a/gcc/configure.ac
++++ b/gcc/configure.ac
+@@ -5001,6 +5001,9 @@
+ gcc_cv_libc_provides_ssp,
+ [gcc_cv_libc_provides_ssp=no
+ case "$target" in
++ *-*-musl*)
++ # All versions of musl provide stack protector
++ gcc_cv_libc_provides_ssp=yes;;
+ *-*-linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
+ # glibc 2.4 and later provides __stack_chk_fail and
+ # either __stack_chk_guard, or TLS access to stack guard canary.
+@@ -5027,6 +5030,7 @@
+ # <http://gcc.gnu.org/ml/gcc/2008-10/msg00130.html>) and for now
+ # simply assert that glibc does provide this, which is true for all
+ # realistically usable GNU/Hurd configurations.
++ # All supported versions of musl provide it as well
+ gcc_cv_libc_provides_ssp=yes;;
+ *-*-darwin* | *-*-freebsd*)
+ AC_CHECK_FUNC(__stack_chk_fail,[gcc_cv_libc_provides_ssp=yes],
+@@ -5093,6 +5097,9 @@
+ gcc_cv_target_dl_iterate_phdr=no
+ fi
+ ;;
++ *-linux-musl*)
++ gcc_cv_target_dl_iterate_phdr=yes
++ ;;
+ esac
+ GCC_TARGET_TEMPLATE([TARGET_DL_ITERATE_PHDR])
+ if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
+Index: b/gcc/ginclude/stddef.h
+===================================================================
+--- a/gcc/ginclude/stddef.h
++++ b/gcc/ginclude/stddef.h
+@@ -181,6 +181,7 @@
+ #ifndef _GCC_SIZE_T
+ #ifndef _SIZET_
+ #ifndef __size_t
++#ifndef __DEFINED_size_t /* musl */
+ #define __size_t__ /* BeOS */
+ #define __SIZE_T__ /* Cray Unicos/Mk */
+ #define _SIZE_T
+@@ -197,6 +198,7 @@
+ #define ___int_size_t_h
+ #define _GCC_SIZE_T
+ #define _SIZET_
++#define __DEFINED_size_t /* musl */
+ #if (defined (__FreeBSD__) && (__FreeBSD__ >= 5)) \
+ || defined(__FreeBSD_kernel__)
+ /* __size_t is a typedef on FreeBSD 5, must not trash it. */
+@@ -214,6 +216,7 @@
+ typedef long ssize_t;
+ #endif /* __BEOS__ */
+ #endif /* !(defined (__GNUG__) && defined (size_t)) */
++#endif /* __DEFINED_size_t */
+ #endif /* __size_t */
+ #endif /* _SIZET_ */
+ #endif /* _GCC_SIZE_T */
+Index: b/libgcc/unwind-dw2-fde-dip.c
+===================================================================
+--- a/libgcc/unwind-dw2-fde-dip.c
++++ b/libgcc/unwind-dw2-fde-dip.c
+@@ -46,33 +46,13 @@
+ #include "unwind-compat.h"
+ #include "gthr.h"
+
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ > 2) \
+- || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 2 && defined(DT_CONFIG)))
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(__BIONIC__)
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(__FreeBSD__) && __FreeBSD__ >= 7
+-# define ElfW __ElfN
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(__OpenBSD__)
+-# define ElfW(type) Elf_##type
+-# define USE_PT_GNU_EH_FRAME
+-#endif
+-
+-#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
+- && defined(TARGET_DL_ITERATE_PHDR) \
+- && defined(__sun__) && defined(__svr4__)
++#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) && defined(TARGET_DL_ITERATE_PHDR)
+ # define USE_PT_GNU_EH_FRAME
++# ifdef __OpenBSD__
++# define ElfW(type) Elf_##type
++# elif defined(__FreeBSD__) && __FreeBSD__ >= 7
++# define ElfW __ElfN
++# endif
+ #endif
+
+ #if defined(USE_PT_GNU_EH_FRAME)
+Index: b/libgomp/config/posix/time.c
+===================================================================
+--- a/libgomp/config/posix/time.c
++++ b/libgomp/config/posix/time.c
+@@ -28,6 +28,8 @@
+ The following implementation uses the most simple POSIX routines.
+ If present, POSIX 4 clocks should be used instead. */
+
++#define _POSIX_C_SOURCE 199309L /* for clocks */
++
+ #include "libgomp.h"
+ #include <unistd.h>
+ #if TIME_WITH_SYS_TIME
+Index: b/libitm/config/arm/hwcap.cc
+===================================================================
+--- a/libitm/config/arm/hwcap.cc
++++ b/libitm/config/arm/hwcap.cc
+@@ -40,7 +40,11 @@
+
+ #ifdef __linux__
+ #include <unistd.h>
++#ifdef __GLIBC__
+ #include <sys/fcntl.h>
++#else
++#include <fcntl.h>
++#endif
+ #include <elf.h>
+
+ static void __attribute__((constructor))
+Index: b/libitm/config/linux/x86/tls.h
+===================================================================
+--- a/libitm/config/linux/x86/tls.h
++++ b/libitm/config/linux/x86/tls.h
+@@ -25,16 +25,19 @@
+ #ifndef LIBITM_X86_TLS_H
+ #define LIBITM_X86_TLS_H 1
+
+-#if defined(__GLIBC_PREREQ) && __GLIBC_PREREQ(2, 10)
++#if defined(__GLIBC_PREREQ)
++#if __GLIBC_PREREQ(2, 10)
+ /* Use slots in the TCB head rather than __thread lookups.
+ GLIBC has reserved words 10 through 13 for TM. */
+ #define HAVE_ARCH_GTM_THREAD 1
+ #define HAVE_ARCH_GTM_THREAD_DISP 1
+ #endif
++#endif
+
+ #include "config/generic/tls.h"
+
+-#if defined(__GLIBC_PREREQ) && __GLIBC_PREREQ(2, 10)
++#if defined(__GLIBC_PREREQ)
++#if __GLIBC_PREREQ(2, 10)
+ namespace GTM HIDDEN {
+
+ #ifdef __x86_64__
+@@ -101,5 +104,6 @@
+
+ } // namespace GTM
+ #endif /* >= GLIBC 2.10 */
++#endif
+
+ #endif // LIBITM_X86_TLS_H
+Index: b/libstdc++-v3/configure.host
+===================================================================
+--- a/libstdc++-v3/configure.host
++++ b/libstdc++-v3/configure.host
+@@ -264,6 +264,13 @@
+ os_include_dir="os/bsd/freebsd"
+ ;;
+ gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu)
++ # check for musl by target
++ case "${host_os}" in
++ *-musl*)
++ os_include_dir="os/generic"
++ ;;
++ *)
++
+ if [ "$uclibc" = "yes" ]; then
+ os_include_dir="os/uclibc"
+ elif [ "$bionic" = "yes" ]; then
+@@ -272,6 +279,9 @@
+ os_include_dir="os/gnu-linux"
+ fi
+ ;;
++
++ esac
++ ;;
+ hpux*)
+ os_include_dir="os/hpux"
+ ;;
+Index: b/gcc/config/mips/linux64.h
+===================================================================
+--- a/gcc/config/mips/linux64.h
++++ b/gcc/config/mips/linux64.h
+@@ -41,4 +41,4 @@
+ #define BIONIC_DYNAMIC_LINKERN32 "/system/bin/linker32"
+ #define GNU_USER_DYNAMIC_LINKERN32 \
+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERN32, UCLIBC_DYNAMIC_LINKERN32, \
+- BIONIC_DYNAMIC_LINKERN32)
++ BIONIC_DYNAMIC_LINKERN32, MUSL_DYNAMIC_LINKER)
+Index: b/gcc/config/mips/linux.h
+===================================================================
+--- a/gcc/config/mips/linux.h
++++ b/gcc/config/mips/linux.h
+@@ -23,3 +23,11 @@
+ #undef UCLIBC_DYNAMIC_LINKER
+ #define UCLIBC_DYNAMIC_LINKER \
+ "%{mnan=2008:/lib/ld-uClibc-mipsn8.so.0;:/lib/ld-uClibc.so.0}"
++
++#if TARGET_ENDIAN_DEFAULT == 0 /* LE */
++#define MUSL_DYNAMIC_LINKER_E "%{EB:;:el}"
++#else
++#define MUSL_DYNAMIC_LINKER_E "%{EL:el}"
++#endif
++#undef MUSL_DYNAMIC_LINKER
++#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-mips" MUSL_DYNAMIC_LINKER_E ".so.1"
--
1.9.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 05/10] gcc: musl patches only available for gcc 4.7+
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
` (3 preceding siblings ...)
2014-05-05 21:17 ` [Buildroot] [PATCHv2 04/10] gcc: add musl support patch to gcc 4.9.0 Thomas Petazzoni
@ 2014-05-05 21:17 ` Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 06/10] package: add support for musl in tuple Thomas Petazzoni
` (5 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
For the moment, the musl support is not in mainline gcc, so it
requires a few patches. We have integrated those patches only for gcc
4.7 and gcc 4.8 at the moment, so only allow those gcc versions when
the musl library is selected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/gcc/Config.in.host | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/package/gcc/Config.in.host b/package/gcc/Config.in.host
index 6a3b75b..99eaa02 100644
--- a/package/gcc/Config.in.host
+++ b/package/gcc/Config.in.host
@@ -31,17 +31,23 @@ choice
depends on !BR2_ARM_EABIHF
# VFPv4 support appeared in gcc 4.5
depends on !BR2_ARM_FPU_VFPV4 && !BR2_ARM_FPU_VFPV4D16
+ # musl patches only for gcc 4.7+
+ depends on !BR2_TOOLCHAIN_BUILDROOT_MUSL
config BR2_GCC_VERSION_4_5_X
depends on !BR2_microblaze && !BR2_aarch64 && !BR2_arc && !BR2_avr32 && !BR2_cortex_a7 && !BR2_cortex_a12 && !BR2_cortex_a15 && !BR2_x86_corei7 && !BR2_x86_jaguar && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_fa526 && !BR2_pj4
select BR2_GCC_NEEDS_MPC
# ARM EABIhf support appeared in gcc 4.6
depends on !BR2_ARM_EABIHF
+ # musl patches only for gcc 4.7+
+ depends on !BR2_TOOLCHAIN_BUILDROOT_MUSL
bool "gcc 4.5.x"
config BR2_GCC_VERSION_4_6_X
depends on !BR2_microblaze && !BR2_aarch64 && !BR2_arc && !BR2_avr32 && !BR2_bfin && !BR2_cortex_a7 && !BR2_cortex_a12 && !BR2_x86_jaguar && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4
select BR2_GCC_NEEDS_MPC
+ # musl patches only for gcc 4.7+
+ depends on !BR2_TOOLCHAIN_BUILDROOT_MUSL
bool "gcc 4.6.x"
config BR2_GCC_VERSION_4_7_X
@@ -67,6 +73,8 @@ choice
config BR2_GCC_VERSION_SNAP
depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8
select BR2_GCC_NEEDS_MPC
+ # musl patches only for gcc 4.7+
+ depends on !BR2_TOOLCHAIN_BUILDROOT_MUSL
bool "gcc snapshot"
endchoice
--
1.9.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 06/10] package: add support for musl in tuple
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
` (4 preceding siblings ...)
2014-05-05 21:17 ` [Buildroot] [PATCHv2 05/10] gcc: musl patches only available for gcc 4.7+ Thomas Petazzoni
@ 2014-05-05 21:17 ` Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 07/10] busybox: allow build with musl Thomas Petazzoni
` (4 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Makefile.in | 2 ++
1 file changed, 2 insertions(+)
diff --git a/package/Makefile.in b/package/Makefile.in
index c34a3bf..2fc3aa7 100644
--- a/package/Makefile.in
+++ b/package/Makefile.in
@@ -47,6 +47,8 @@ endif
ifeq ($(BR2_TOOLCHAIN_USES_UCLIBC),y)
LIBC=uclibc
+else ifeq ($(BR2_TOOLCHAIN_USES_MUSL),y)
+LIBC=musl
else
LIBC=gnu
endif
--
1.9.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 07/10] busybox: allow build with musl
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
` (5 preceding siblings ...)
2014-05-05 21:17 ` [Buildroot] [PATCHv2 06/10] package: add support for musl in tuple Thomas Petazzoni
@ 2014-05-05 21:17 ` Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 08/10] toolchain-buildroot: add support for building musl toolchains Thomas Petazzoni
` (3 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
The musl C library does not yet implemented the getpwent_r() function,
needed by the Busybox password code when CONFIG_USE_BB_PWD_GRP is
disabled. So we enable it when the musl C library is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/busybox/busybox.mk | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/package/busybox/busybox.mk b/package/busybox/busybox.mk
index 793ffb9..150100b 100644
--- a/package/busybox/busybox.mk
+++ b/package/busybox/busybox.mk
@@ -153,6 +153,15 @@ define BUSYBOX_INTERNAL_SHADOW_PASSWORDS
endef
endif
+# We also need to use internal functions when using the musl C
+# library, since some of them are not yet implemented by musl.
+ifeq ($(BR2_TOOLCHAIN_USES_MUSL),y)
+define BUSYBOX_INTERNAL_SHADOW_PASSWORDS
+ $(call KCONFIG_ENABLE_OPT,CONFIG_USE_BB_PWD_GRP,$(BUSYBOX_BUILD_CONFIG))
+ $(call KCONFIG_ENABLE_OPT,CONFIG_USE_BB_SHADOW,$(BUSYBOX_BUILD_CONFIG))
+endef
+endif
+
ifeq ($(BR2_INIT_BUSYBOX),y)
define BUSYBOX_SET_INIT
$(call KCONFIG_ENABLE_OPT,CONFIG_INIT,$(BUSYBOX_BUILD_CONFIG))
--
1.9.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 08/10] toolchain-buildroot: add support for building musl toolchains
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
` (6 preceding siblings ...)
2014-05-05 21:17 ` [Buildroot] [PATCHv2 07/10] busybox: allow build with musl Thomas Petazzoni
@ 2014-05-05 21:17 ` Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 09/10] gcc: disable libsanitizer for musl Thomas Petazzoni
` (2 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
toolchain/toolchain-buildroot/Config.in | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in
index 42166d2..1bd3f92 100644
--- a/toolchain/toolchain-buildroot/Config.in
+++ b/toolchain/toolchain-buildroot/Config.in
@@ -77,6 +77,15 @@ config BR2_TOOLCHAIN_BUILDROOT_GLIBC
comment "(e)glibc only available with shared lib support"
depends on BR2_PREFER_STATIC_LIB
+config BR2_TOOLCHAIN_BUILDROOT_MUSL
+ bool "musl (experimental)"
+ depends on BR2_arm || BR2_armeb || BR2_i386 || BR2_microblaze || \
+ BR2_mips || BR2_mipsel || BR2_powerpc || BR2_x86_64
+ select BR2_TOOLCHAIN_USES_MUSL
+ help
+ This option selects musl as the C library for the
+ cross-compilation toolchain.
+
endchoice
config BR2_TOOLCHAIN_BUILDROOT_LIBC
@@ -86,6 +95,7 @@ config BR2_TOOLCHAIN_BUILDROOT_LIBC
# 'glibc'
default "glibc" if BR2_TOOLCHAIN_BUILDROOT_EGLIBC
default "glibc" if BR2_TOOLCHAIN_BUILDROOT_GLIBC
+ default "musl" if BR2_TOOLCHAIN_BUILDROOT_MUSL
source "package/uclibc/Config.in"
source "package/glibc/Config.in"
--
1.9.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 09/10] gcc: disable libsanitizer for musl
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
` (7 preceding siblings ...)
2014-05-05 21:17 ` [Buildroot] [PATCHv2 08/10] toolchain-buildroot: add support for building musl toolchains Thomas Petazzoni
@ 2014-05-05 21:17 ` Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 10/10] toolchain-external: add publicly available musl toolchains Thomas Petazzoni
2014-05-06 8:18 ` [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Peter Korsgaard
10 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
A build issue affects libsanitizer on musl toolchains, even with
previous versions of gcc such as 4.8.x, so we disable building
libsanitizer when working with musl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/gcc/gcc.mk | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/gcc/gcc.mk b/package/gcc/gcc.mk
index 3274821..741bb84 100644
--- a/package/gcc/gcc.mk
+++ b/package/gcc/gcc.mk
@@ -122,8 +122,9 @@ ifneq ($(BR2_TOOLCHAIN_BUILDROOT_WCHAR),y)
HOST_GCC_COMMON_CONF_OPT += --disable-libquadmath
endif
-# libsanitizer requires wordexp, not in default uClibc config
-ifeq ($(BR2_TOOLCHAIN_BUILDROOT_UCLIBC),y)
+# libsanitizer requires wordexp, not in default uClibc config. Also
+# doesn't build properly with musl.
+ifeq ($(BR2_TOOLCHAIN_BUILDROOT_UCLIBC)$(BR2_TOOLCHAIN_BUILDROOT_MUSL),y)
HOST_GCC_COMMON_CONF_OPT += --disable-libsanitizer
endif
--
1.9.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 10/10] toolchain-external: add publicly available musl toolchains
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
` (8 preceding siblings ...)
2014-05-05 21:17 ` [Buildroot] [PATCHv2 09/10] gcc: disable libsanitizer for musl Thomas Petazzoni
@ 2014-05-05 21:17 ` Thomas Petazzoni
2014-05-06 8:18 ` Peter Korsgaard
2014-05-06 8:18 ` [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Peter Korsgaard
10 siblings, 1 reply; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-05 21:17 UTC (permalink / raw)
To: buildroot
This commit adds ten toolchains based on the musl C library that are
publicly available from the musl-cross project.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
toolchain/toolchain-external/Config.in | 30 ++++++++++++++++++++++
toolchain/toolchain-external/toolchain-external.mk | 27 +++++++++++++++++++
2 files changed, 57 insertions(+)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 0d8d9b9..0f78937 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -867,6 +867,26 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12
Toolchain for the AArch64 architecture, from
http://www.linaro.org/engineering/armv8/
+config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
+ bool "Musl toolchain"
+ depends on (BR2_arm && BR2_ARM_EABI) || (BR2_armeb && BR2_ARM_EABI) || \
+ (BR2_i386 && !BR2_x86_i386) || BR2_microblaze || BR2_mips || \
+ BR2_mipsel || BR2_powerpc || BR2_x86_64
+ depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
+ select BR2_TOOLCHAIN_EXTERNAL_MUSL
+ select BR2_INSTALL_LIBSTDCPP
+ select BR2_HOSTARCH_NEEDS_IA32_LIBS
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2
+ help
+ Toolchain based on the Musl C library, provided by the
+ musl-cross project. It uses gcc 4.8.2, binutils 2.24 and
+ musl 1.0.0. It does not have a cross debugger included.
+
+ The ARM toolchain is built for ARMv4t, soft-float.
+ The x86 toolchain is built for i486.
+
+ http://musl.codu.org/
+
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM
bool "Custom toolchain"
help
@@ -953,6 +973,16 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FDPIC
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FLAT
default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FDPIC
+ default "arm-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm
+ default "armeb-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_armeb
+ default "i486-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_i386
+ default "microblaze-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_microblaze
+ default "mips-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mips && !BR2_SOFT_FLOAT)
+ default "mips-sf-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mips && BR2_SOFT_FLOAT)
+ default "mipsel-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mipsel && !BR2_SOFT_FLOAT)
+ default "mipsel-sf-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mipsel && BR2_SOFT_FLOAT)
+ default "powerpc-linux-musl-gcc" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_powerpc
+ default "x86_64-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_x86_64
default BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX \
if BR2_TOOLCHAIN_EXTERNAL_CUSTOM
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 05d8867..3f88188 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -369,6 +369,33 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02),y)
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.02_linux.tar.xz
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
+TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/
+ifeq ($(BR2_arm),y)
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-1.0.0.tar.xz
+else ifeq ($(BR2_armeb),y)
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-1.0.0.tar.xz
+else ifeq ($(BR2_i386),y)
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-1.0.0.tar.xz
+else ifeq ($(BR2_microblaze),y)
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-1.0.0.tar.xz
+else ifeq ($(BR2_mips),y)
+ifeq ($(BR2_SOFT_FLOAT),y)
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-1.0.0.tar.xz
+else
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-1.0.0.tar.xz
+endif # BR2_SOFT_FLOAT
+else ifeq ($(BR2_mipsel),y)
+ifeq ($(BR2_SOFT_FLOAT),y)
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-1.0.0.tar.xz
+else
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-1.0.0.tar.xz
+endif # BR2_SOFT_FLOAT
+else ifeq ($(BR2_powerpc),y)
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-1.0.0.tar.xz
+else ifeq ($(BR2_x86_64),y)
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-1.0.0.tar.xz
+endif
else
# Custom toolchain
TOOLCHAIN_EXTERNAL_SITE = $(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))
--
1.9.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 10/10] toolchain-external: add publicly available musl toolchains
2014-05-05 21:17 ` [Buildroot] [PATCHv2 10/10] toolchain-external: add publicly available musl toolchains Thomas Petazzoni
@ 2014-05-06 8:18 ` Peter Korsgaard
2014-05-06 9:12 ` Thomas Petazzoni
0 siblings, 1 reply; 15+ messages in thread
From: Peter Korsgaard @ 2014-05-06 8:18 UTC (permalink / raw)
To: buildroot
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
> This commit adds ten toolchains based on the musl C library that are
> publicly available from the musl-cross project.
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
> toolchain/toolchain-external/Config.in | 30 ++++++++++++++++++++++
> toolchain/toolchain-external/toolchain-external.mk | 27 +++++++++++++++++++
> 2 files changed, 57 insertions(+)
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index 0d8d9b9..0f78937 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -867,6 +867,26 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12
> Toolchain for the AArch64 architecture, from
> http://www.linaro.org/engineering/armv8/
> +config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
> + bool "Musl toolchain"
> + depends on (BR2_arm && BR2_ARM_EABI) || (BR2_armeb && BR2_ARM_EABI) || \
> + (BR2_i386 && !BR2_x86_i386) || BR2_microblaze || BR2_mips || \
> + BR2_mipsel || BR2_powerpc || BR2_x86_64
The powerpc variant uses the classic ABI, so this should be
(BR2_powerpc && BR2_powerpc_CLASSIC)
> + depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> + select BR2_TOOLCHAIN_EXTERNAL_MUSL
> + select BR2_INSTALL_LIBSTDCPP
> + select BR2_HOSTARCH_NEEDS_IA32_LIBS
> + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2
> + help
> + Toolchain based on the Musl C library, provided by the
> + musl-cross project. It uses gcc 4.8.2, binutils 2.24 and
> + musl 1.0.0. It does not have a cross debugger included.
> +
> + The ARM toolchain is built for ARMv4t, soft-float.
> + The x86 toolchain is built for i486.
> +
> + http://musl.codu.org/
> +
> config BR2_TOOLCHAIN_EXTERNAL_CUSTOM
> bool "Custom toolchain"
> help
> @@ -953,6 +973,16 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
> default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FDPIC
> default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FLAT
> default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FDPIC
> + default "arm-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm
> + default "armeb-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_armeb
> + default "i486-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_i386
> + default "microblaze-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_microblaze
> + default "mips-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mips && !BR2_SOFT_FLOAT)
> + default "mips-sf-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mips && BR2_SOFT_FLOAT)
> + default "mipsel-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mipsel && !BR2_SOFT_FLOAT)
> + default "mipsel-sf-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mipsel && BR2_SOFT_FLOAT)
> + default "powerpc-linux-musl-gcc" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_powerpc
The '-gcc' part shouldn't be there.
Committed with that fixed, thanks.
Tested with arm-versatile / ppc-g3beige / mipsel-malta / x86 qemu
defconfigs.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 00/10] musl support, internal and external backends
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
` (9 preceding siblings ...)
2014-05-05 21:17 ` [Buildroot] [PATCHv2 10/10] toolchain-external: add publicly available musl toolchains Thomas Petazzoni
@ 2014-05-06 8:18 ` Peter Korsgaard
2014-05-06 9:13 ` Thomas Petazzoni
10 siblings, 1 reply; 15+ messages in thread
From: Peter Korsgaard @ 2014-05-06 8:18 UTC (permalink / raw)
To: buildroot
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
> Hello,
> This patch series does two things:
> * Adds the musl support in the internal toolchain backend.
> * Adds a set of pre-built musl toolchains to the external toolchain
> backend.
> Compared to v1:
> * The issue of the symbolic link for the dynamic linker noticed by
> Peter is fixed. In fact, the musl Makefile can create this symbolic
> link perfectly fine if we are in the good conditions.
> * A patch for musl support in gcc 4.9.0 has been added.
> * The patch for musl external toolchains has been added, and after
> the suggestion from Arnout, a single Kconfig option is now used
> instead of one per architecture.
> I've built and boot tested under Qemu ARM/musl/gcc4.8 and
> i386/musl/gcc4.9.
Committed series, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 10/10] toolchain-external: add publicly available musl toolchains
2014-05-06 8:18 ` Peter Korsgaard
@ 2014-05-06 9:12 ` Thomas Petazzoni
0 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-06 9:12 UTC (permalink / raw)
To: buildroot
Dear Peter Korsgaard,
On Tue, 06 May 2014 10:18:07 +0200, Peter Korsgaard wrote:
> > + default "powerpc-linux-musl-gcc" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_powerpc
>
> The '-gcc' part shouldn't be there.
Dammit, of course. There were so many variants that I couldn't test
them all.
> Committed with that fixed, thanks.
>
> Tested with arm-versatile / ppc-g3beige / mipsel-malta / x86 qemu
> defconfigs.
Great, thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* [Buildroot] [PATCHv2 00/10] musl support, internal and external backends
2014-05-06 8:18 ` [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Peter Korsgaard
@ 2014-05-06 9:13 ` Thomas Petazzoni
0 siblings, 0 replies; 15+ messages in thread
From: Thomas Petazzoni @ 2014-05-06 9:13 UTC (permalink / raw)
To: buildroot
Dear Peter Korsgaard,
On Tue, 06 May 2014 10:18:41 +0200, Peter Korsgaard wrote:
> > Compared to v1:
>
> > * The issue of the symbolic link for the dynamic linker noticed by
> > Peter is fixed. In fact, the musl Makefile can create this symbolic
> > link perfectly fine if we are in the good conditions.
>
> > * A patch for musl support in gcc 4.9.0 has been added.
>
> > * The patch for musl external toolchains has been added, and after
> > the suggestion from Arnout, a single Kconfig option is now used
> > instead of one per architecture.
>
> > I've built and boot tested under Qemu ARM/musl/gcc4.8 and
> > i386/musl/gcc4.9.
>
> Committed series, thanks.
Great, thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2014-05-06 9:13 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-05 21:17 [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 01/10] musl: new package Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 02/10] gcc: add musl support patch for gcc 4.7.3 Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 03/10] gcc: add musl support patch to gcc 4.8.2 Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 04/10] gcc: add musl support patch to gcc 4.9.0 Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 05/10] gcc: musl patches only available for gcc 4.7+ Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 06/10] package: add support for musl in tuple Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 07/10] busybox: allow build with musl Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 08/10] toolchain-buildroot: add support for building musl toolchains Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 09/10] gcc: disable libsanitizer for musl Thomas Petazzoni
2014-05-05 21:17 ` [Buildroot] [PATCHv2 10/10] toolchain-external: add publicly available musl toolchains Thomas Petazzoni
2014-05-06 8:18 ` Peter Korsgaard
2014-05-06 9:12 ` Thomas Petazzoni
2014-05-06 8:18 ` [Buildroot] [PATCHv2 00/10] musl support, internal and external backends Peter Korsgaard
2014-05-06 9:13 ` Thomas Petazzoni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox