* [Buildroot] [PATCHv3 1/2] linux: add option to explicitly specify the kernel image name
@ 2014-07-11 12:49 Waldemar Brodkorb
2014-07-15 19:34 ` Yann E. MORIN
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Waldemar Brodkorb @ 2014-07-11 12:49 UTC (permalink / raw)
To: buildroot
For example the upcoming qemu-xtensa patch is using this feature,
where the target is called "zImage", but the resulting kernel name
is "Image.elf".
---
Changes v2 -> v3:
- improve subject (suggested by Thomas P.)
- LINUX_IMAGE_NAME defaults to LINUX_TARGET_NAME (suggested by Yann)
- improve help text (suggested by Yann)
Changes v1 -> v2:
- add comment about default value (suggested by Arnout)
- reorder default value for LINUX_TARGET_NAME (suggested by Arnout)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
---
linux/Config.in | 10 ++++++++++
linux/linux.mk | 10 +++++++---
2 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/linux/Config.in b/linux/Config.in
index 0a13b13..c13b929 100644
--- a/linux/Config.in
+++ b/linux/Config.in
@@ -244,6 +244,16 @@ config BR2_LINUX_KERNEL_IMAGE_TARGET_NAME
Specify the kernel make target to build the kernel that you
need.
+config BR2_LINUX_KERNEL_IMAGE_NAME
+ string "Kernel image name"
+ depends on BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM
+ help
+ The filename of the kernel image, if it is different from the
+ make target (above). Only Xtensa uses a filename different from
+ the make target. Defaults to BR2_LINUX_KERNEL_IMAGE_TARGET_NAME.
+
+ If unsure, leave it empty.
+
config BR2_LINUX_KERNEL_UIMAGE_LOADADDR
string "load address (for 3.7+ multi-platform image)"
depends on BR2_arm || BR2_armeb
diff --git a/linux/linux.mk b/linux/linux.mk
index bd3f2ac..d7e8390 100644
--- a/linux/linux.mk
+++ b/linux/linux.mk
@@ -80,7 +80,8 @@ endif
KERNEL_DTBS = $(addsuffix .dtb,$(KERNEL_DTS_NAME))
ifeq ($(BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM),y)
-LINUX_IMAGE_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
+LINUX_IMAGE_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_NAME))
+LINUX_TARGET_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
else
ifeq ($(BR2_LINUX_KERNEL_UIMAGE),y)
LINUX_IMAGE_NAME = uImage
@@ -106,6 +107,9 @@ else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ),y)
LINUX_IMAGE_NAME = vmlinuz
endif
endif
+ifeq ($(LINUX_IMAGE_NAME),)
+LINUX_IMAGE_NAME = $(LINUX_TARGET_NAME)
+endif
LINUX_KERNEL_UIMAGE_LOADADDR=$(call qstrip,$(BR2_LINUX_KERNEL_UIMAGE_LOADADDR))
ifneq ($(LINUX_KERNEL_UIMAGE_LOADADDR),)
@@ -259,7 +263,7 @@ endif
define LINUX_BUILD_CMDS
$(if $(BR2_LINUX_KERNEL_USE_CUSTOM_DTS),
cp $(BR2_LINUX_KERNEL_CUSTOM_DTS_PATH) $(KERNEL_ARCH_PATH)/boot/dts/)
- $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
+ $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME)
@if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ; \
fi
@@ -332,7 +336,7 @@ endif
$(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LINUX_DIR)/.stamp_images_installed $(BINARIES_DIR)/rootfs.cpio
@$(call MESSAGE,"Rebuilding kernel with initramfs")
# Build the kernel.
- $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
+ $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME)
$(LINUX_APPEND_DTB)
# Copy the kernel image to its final destination
cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [Buildroot] [PATCHv3 1/2] linux: add option to explicitly specify the kernel image name
2014-07-11 12:49 [Buildroot] [PATCHv3 1/2] linux: add option to explicitly specify the kernel image name Waldemar Brodkorb
@ 2014-07-15 19:34 ` Yann E. MORIN
2014-07-15 20:20 ` Thomas Petazzoni
2014-07-16 23:01 ` Sagaert Johan
2 siblings, 0 replies; 6+ messages in thread
From: Yann E. MORIN @ 2014-07-15 19:34 UTC (permalink / raw)
To: buildroot
Waldemar, All,
On 2014-07-11 14:49 +0200, Waldemar Brodkorb spake thusly:
> For example the upcoming qemu-xtensa patch is using this feature,
> where the target is called "zImage", but the resulting kernel name
> is "Image.elf".
>
> ---
> Changes v2 -> v3:
> - improve subject (suggested by Thomas P.)
> - LINUX_IMAGE_NAME defaults to LINUX_TARGET_NAME (suggested by Yann)
> - improve help text (suggested by Yann)
> Changes v1 -> v2:
> - add comment about default value (suggested by Arnout)
> - reorder default value for LINUX_TARGET_NAME (suggested by Arnout)
>
> Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
> ---
> linux/Config.in | 10 ++++++++++
> linux/linux.mk | 10 +++++++---
> 2 files changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/linux/Config.in b/linux/Config.in
> index 0a13b13..c13b929 100644
> --- a/linux/Config.in
> +++ b/linux/Config.in
> @@ -244,6 +244,16 @@ config BR2_LINUX_KERNEL_IMAGE_TARGET_NAME
> Specify the kernel make target to build the kernel that you
> need.
>
> +config BR2_LINUX_KERNEL_IMAGE_NAME
> + string "Kernel image name"
> + depends on BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM
> + help
> + The filename of the kernel image, if it is different from the
> + make target (above). Only Xtensa uses a filename different from
> + the make target. Defaults to BR2_LINUX_KERNEL_IMAGE_TARGET_NAME.
> +
> + If unsure, leave it empty.
> +
> config BR2_LINUX_KERNEL_UIMAGE_LOADADDR
> string "load address (for 3.7+ multi-platform image)"
> depends on BR2_arm || BR2_armeb
> diff --git a/linux/linux.mk b/linux/linux.mk
> index bd3f2ac..d7e8390 100644
> --- a/linux/linux.mk
> +++ b/linux/linux.mk
> @@ -80,7 +80,8 @@ endif
> KERNEL_DTBS = $(addsuffix .dtb,$(KERNEL_DTS_NAME))
>
> ifeq ($(BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM),y)
> -LINUX_IMAGE_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
> +LINUX_IMAGE_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_NAME))
> +LINUX_TARGET_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
> else
> ifeq ($(BR2_LINUX_KERNEL_UIMAGE),y)
> LINUX_IMAGE_NAME = uImage
> @@ -106,6 +107,9 @@ else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ),y)
> LINUX_IMAGE_NAME = vmlinuz
> endif
> endif
> +ifeq ($(LINUX_IMAGE_NAME),)
> +LINUX_IMAGE_NAME = $(LINUX_TARGET_NAME)
> +endif
>
> LINUX_KERNEL_UIMAGE_LOADADDR=$(call qstrip,$(BR2_LINUX_KERNEL_UIMAGE_LOADADDR))
> ifneq ($(LINUX_KERNEL_UIMAGE_LOADADDR),)
> @@ -259,7 +263,7 @@ endif
> define LINUX_BUILD_CMDS
> $(if $(BR2_LINUX_KERNEL_USE_CUSTOM_DTS),
> cp $(BR2_LINUX_KERNEL_CUSTOM_DTS_PATH) $(KERNEL_ARCH_PATH)/boot/dts/)
> - $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
> + $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME)
> @if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \
> $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ; \
> fi
> @@ -332,7 +336,7 @@ endif
> $(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LINUX_DIR)/.stamp_images_installed $(BINARIES_DIR)/rootfs.cpio
> @$(call MESSAGE,"Rebuilding kernel with initramfs")
> # Build the kernel.
> - $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
> + $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME)
> $(LINUX_APPEND_DTB)
> # Copy the kernel image to its final destination
> cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
> --
> 1.7.10.4
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCHv3 1/2] linux: add option to explicitly specify the kernel image name
2014-07-11 12:49 [Buildroot] [PATCHv3 1/2] linux: add option to explicitly specify the kernel image name Waldemar Brodkorb
2014-07-15 19:34 ` Yann E. MORIN
@ 2014-07-15 20:20 ` Thomas Petazzoni
2014-07-16 23:01 ` Sagaert Johan
2 siblings, 0 replies; 6+ messages in thread
From: Thomas Petazzoni @ 2014-07-15 20:20 UTC (permalink / raw)
To: buildroot
Dear Waldemar Brodkorb,
On Fri, 11 Jul 2014 14:49:22 +0200, Waldemar Brodkorb wrote:
> For example the upcoming qemu-xtensa patch is using this feature,
> where the target is called "zImage", but the resulting kernel name
> is "Image.elf".
>
> ---
> Changes v2 -> v3:
> - improve subject (suggested by Thomas P.)
> - LINUX_IMAGE_NAME defaults to LINUX_TARGET_NAME (suggested by Yann)
> - improve help text (suggested by Yann)
> Changes v1 -> v2:
> - add comment about default value (suggested by Arnout)
> - reorder default value for LINUX_TARGET_NAME (suggested by Arnout)
>
> Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
> ---
> linux/Config.in | 10 ++++++++++
> linux/linux.mk | 10 +++++++---
> 2 files changed, 17 insertions(+), 3 deletions(-)
Thanks, I've applied this patch and the one adding the qemu
xtensa defconfig. However, regarding this second one, I'd really like
to see a followup patch adding a way of downloading the toolchain
overlay file, instead of having it inside Buildroot.
Thanks,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCHv3 1/2] linux: add option to explicitly specify the kernel image name
2014-07-11 12:49 [Buildroot] [PATCHv3 1/2] linux: add option to explicitly specify the kernel image name Waldemar Brodkorb
2014-07-15 19:34 ` Yann E. MORIN
2014-07-15 20:20 ` Thomas Petazzoni
@ 2014-07-16 23:01 ` Sagaert Johan
2014-07-17 15:29 ` [Buildroot] [PATCHv3 1/2] linux: add option to explicitlyspecify the kernel image name : breaks kernel build ! Sagaert Johan
2 siblings, 1 reply; 6+ messages in thread
From: Sagaert Johan @ 2014-07-16 23:01 UTC (permalink / raw)
To: buildroot
Hi
I have uImage selected as kernel format,but the actual image build is zImage....
Rsulting in a build failure.
(commit c78d57637cd57a383e44713eb27e654b3071340e )
>>> linux 3.15.5 Installing to target
install -m 0644 -D /home/buildroot12git/output/build/linux-3.15.5/arch/arm/boot/uImage
/home/buildroot12git/output/target/boot/uImage
install: cannot stat `/home/buildroot12git/output/build/linux-3.15.5/arch/arm/boot/uImage': No such file or directory
===============================================================================================
BR2_arm=y
BR2_KERNEL_HEADERS_VERSION=y
BR2_DEFAULT_KERNEL_VERSION="3.15.5"
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_15=y
BR2_UCLIBC_CONFIG="$(TOPDIR)/board/Apex/msi_003/uClibc-0.9.33.config"
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
# BR2_UCLIBC_INSTALL_UTILS is not set
BR2_BINUTILS_VERSION_2_23_2=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_HOST_GDB=y
BR2_ECLIPSE_REGISTER=y
BR2_TARGET_GENERIC_HOSTNAME="sms_003"
BR2_TARGET_GENERIC_ISSUE="Apex TX28 Linux"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_ROOTFS_DEVICE_TABLE="$(TOPDIR)/system/device_table.txt"
BR2_TARGET_GENERIC_ROOT_PASSWD="1234"
BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_ROOTFS_OVERLAY="$(TOPDIR)/board/Apex/msi_003/overlay_SMSTX28"
BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/post.sh"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.15.5"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(TOPDIR)/board/Apex/msi_003/tx28-linux-3.14.x.config"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="$(TOPDIR)/board/Apex/msi_003/imx28-tx28.dts"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_PACKAGE_BUSYBOX_CONFIG="$(TOPDIR)/board/Apex/msi_003/busybox-1.22.x.config"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_DIGITAL_IO=y
BR2_DIGITAL_IO_VERSION_CUSTOM=y
BR2_DIGITAL_IO_VERSION_CUSTOM_NAME="TX28_V102"
BR2_PACKAGE_GZIP=y
BR2_PACKAGE_STRACE=y
BR2_PACKAGE_MTD=y
BR2_PACKAGE_MTD_MKFSUBIFS=y
BR2_PACKAGE_GNUPLOT=y
BR2_PACKAGE_RRDTOOL=y
BR2_PACKAGE_EUDEV_RULES_GEN=y
BR2_PACKAGE_UBOOT_TOOLS=y
BR2_PACKAGE_LIBGCRYPT=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_MYSQL=y
BR2_PACKAGE_JQUERY_MOBILE=y
BR2_PACKAGE_JQUERY_MOBILE_FULL=y
BR2_PACKAGE_JQUERY_MOBILE_DEMOS=y
BR2_PACKAGE_LIBCGI=y
BR2_PACKAGE_LIBSOUP=y
BR2_PACKAGE_LIBUPNP=y
BR2_PACKAGE_LIBWEBSOCKETS=y
BR2_PACKAGE_QDECODER=y
BR2_PACKAGE_LIBESMTP=y
BR2_PACKAGE_DROPBEAR=y
BR2_PACKAGE_EZ_IPUPDATE=y
BR2_PACKAGE_NTP=y
BR2_PACKAGE_NTP_NTPDATE=y
BR2_PACKAGE_RPCBIND=y
BR2_PACKAGE_INOTIFY_TOOLS=y
BR2_PACKAGE_TIME=y
BR2_PACKAGE_KMOD_TOOLS=y
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="tx28-apex"
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.karo-electronics.de/karo-tx-uboot.git"
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="KARO-TX-2014-06-04"
BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="board/karo/tx28/apex-extra-uboot-patches_karo"
BR2_TARGET_UBOOT_FORMAT_SB=y
BR2_PACKAGE_HOST_E2FSPROGS=y
BR2_PACKAGE_HOST_GENEXT2FS=y
Regards Johan
-----Oorspronkelijk bericht-----
Van: buildroot-bounces at busybox.net [mailto:buildroot-bounces at busybox.net] Namens Waldemar Brodkorb
Verzonden: vrijdag 11 juli 2014 14:49
Aan: buildroot at buildroot.org
Onderwerp: [Buildroot] [PATCHv3 1/2] linux: add option to explicitly specify the kernel image name
For example the upcoming qemu-xtensa patch is using this feature, where the target is called "zImage", but the resulting kernel name
is "Image.elf".
---
Changes v2 -> v3:
- improve subject (suggested by Thomas P.)
- LINUX_IMAGE_NAME defaults to LINUX_TARGET_NAME (suggested by Yann)
- improve help text (suggested by Yann) Changes v1 -> v2:
- add comment about default value (suggested by Arnout)
- reorder default value for LINUX_TARGET_NAME (suggested by Arnout)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
---
linux/Config.in | 10 ++++++++++
linux/linux.mk | 10 +++++++---
2 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/linux/Config.in b/linux/Config.in index 0a13b13..c13b929 100644
--- a/linux/Config.in
+++ b/linux/Config.in
@@ -244,6 +244,16 @@ config BR2_LINUX_KERNEL_IMAGE_TARGET_NAME
Specify the kernel make target to build the kernel that you
need.
+config BR2_LINUX_KERNEL_IMAGE_NAME
+ string "Kernel image name"
+ depends on BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM
+ help
+ The filename of the kernel image, if it is different from the
+ make target (above). Only Xtensa uses a filename different from
+ the make target. Defaults to BR2_LINUX_KERNEL_IMAGE_TARGET_NAME.
+
+ If unsure, leave it empty.
+
config BR2_LINUX_KERNEL_UIMAGE_LOADADDR
string "load address (for 3.7+ multi-platform image)"
depends on BR2_arm || BR2_armeb
diff --git a/linux/linux.mk b/linux/linux.mk index bd3f2ac..d7e8390 100644
--- a/linux/linux.mk
+++ b/linux/linux.mk
@@ -80,7 +80,8 @@ endif
KERNEL_DTBS = $(addsuffix .dtb,$(KERNEL_DTS_NAME))
ifeq ($(BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM),y)
-LINUX_IMAGE_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
+LINUX_IMAGE_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_NAME))
+LINUX_TARGET_NAME = $(call
+qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
else
ifeq ($(BR2_LINUX_KERNEL_UIMAGE),y)
LINUX_IMAGE_NAME = uImage
@@ -106,6 +107,9 @@ else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ),y) LINUX_IMAGE_NAME = vmlinuz endif endif
+ifeq ($(LINUX_IMAGE_NAME),)
+LINUX_IMAGE_NAME = $(LINUX_TARGET_NAME) endif
LINUX_KERNEL_UIMAGE_LOADADDR=$(call qstrip,$(BR2_LINUX_KERNEL_UIMAGE_LOADADDR))
ifneq ($(LINUX_KERNEL_UIMAGE_LOADADDR),)
@@ -259,7 +263,7 @@ endif
define LINUX_BUILD_CMDS
$(if $(BR2_LINUX_KERNEL_USE_CUSTOM_DTS),
cp $(BR2_LINUX_KERNEL_CUSTOM_DTS_PATH) $(KERNEL_ARCH_PATH)/boot/dts/)
- $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
+ $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D)
+$(LINUX_TARGET_NAME)
@if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ; \
fi
@@ -332,7 +336,7 @@ endif
$(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LINUX_DIR)/.stamp_images_installed
$(BINARIES_DIR)/rootfs.cpio
@$(call MESSAGE,"Rebuilding kernel with initramfs")
# Build the kernel.
- $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
+ $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D)
+$(LINUX_TARGET_NAME)
$(LINUX_APPEND_DTB)
# Copy the kernel image to its final destination
cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
--
1.7.10.4
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCHv3 1/2] linux: add option to explicitlyspecify the kernel image name : breaks kernel build !
2014-07-16 23:01 ` Sagaert Johan
@ 2014-07-17 15:29 ` Sagaert Johan
2014-07-17 20:58 ` Thomas Petazzoni
0 siblings, 1 reply; 6+ messages in thread
From: Sagaert Johan @ 2014-07-17 15:29 UTC (permalink / raw)
To: buildroot
Hi
If BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set
then LINUX_TARGET_NAME is undefined.
LINUX_TARGET_NAME is used on lines 266 (linux/linux.mk) and 341 to build the kernel.
Regards Johan
-----Oorspronkelijk bericht-----
Van: buildroot-bounces at busybox.net [mailto:buildroot-bounces at busybox.net] Namens Sagaert Johan
Verzonden: donderdag 17 juli 2014 1:02
Aan: 'Waldemar Brodkorb'
CC: buildroot at busybox.net
Onderwerp: Re: [Buildroot] [PATCHv3 1/2] linux: add option to explicitlyspecify the kernel image name
Hi
I have uImage selected as kernel format,but the actual image build is zImage....
Rsulting in a build failure.
(commit c78d57637cd57a383e44713eb27e654b3071340e )
>>> linux 3.15.5 Installing to target
install -m 0644 -D /home/buildroot12git/output/build/linux-3.15.5/arch/arm/boot/uImage
/home/buildroot12git/output/target/boot/uImage
install: cannot stat `/home/buildroot12git/output/build/linux-3.15.5/arch/arm/boot/uImage': No such file or directory
===============================================================================================
BR2_arm=y
BR2_KERNEL_HEADERS_VERSION=y
BR2_DEFAULT_KERNEL_VERSION="3.15.5"
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_15=y
BR2_UCLIBC_CONFIG="$(TOPDIR)/board/Apex/msi_003/uClibc-0.9.33.config"
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
# BR2_UCLIBC_INSTALL_UTILS is not set
BR2_BINUTILS_VERSION_2_23_2=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_HOST_GDB=y
BR2_ECLIPSE_REGISTER=y
BR2_TARGET_GENERIC_HOSTNAME="sms_003"
BR2_TARGET_GENERIC_ISSUE="Apex TX28 Linux"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_ROOTFS_DEVICE_TABLE="$(TOPDIR)/system/device_table.txt"
BR2_TARGET_GENERIC_ROOT_PASSWD="1234"
BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_ROOTFS_OVERLAY="$(TOPDIR)/board/Apex/msi_003/overlay_SMSTX28"
BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/post.sh"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.15.5"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(TOPDIR)/board/Apex/msi_003/tx28-linux-3.14.x.config"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="$(TOPDIR)/board/Apex/msi_003/imx28-tx28.dts"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_PACKAGE_BUSYBOX_CONFIG="$(TOPDIR)/board/Apex/msi_003/busybox-1.22.x.config"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_DIGITAL_IO=y
BR2_DIGITAL_IO_VERSION_CUSTOM=y
BR2_DIGITAL_IO_VERSION_CUSTOM_NAME="TX28_V102"
BR2_PACKAGE_GZIP=y
BR2_PACKAGE_STRACE=y
BR2_PACKAGE_MTD=y
BR2_PACKAGE_MTD_MKFSUBIFS=y
BR2_PACKAGE_GNUPLOT=y
BR2_PACKAGE_RRDTOOL=y
BR2_PACKAGE_EUDEV_RULES_GEN=y
BR2_PACKAGE_UBOOT_TOOLS=y
BR2_PACKAGE_LIBGCRYPT=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_MYSQL=y
BR2_PACKAGE_JQUERY_MOBILE=y
BR2_PACKAGE_JQUERY_MOBILE_FULL=y
BR2_PACKAGE_JQUERY_MOBILE_DEMOS=y
BR2_PACKAGE_LIBCGI=y
BR2_PACKAGE_LIBSOUP=y
BR2_PACKAGE_LIBUPNP=y
BR2_PACKAGE_LIBWEBSOCKETS=y
BR2_PACKAGE_QDECODER=y
BR2_PACKAGE_LIBESMTP=y
BR2_PACKAGE_DROPBEAR=y
BR2_PACKAGE_EZ_IPUPDATE=y
BR2_PACKAGE_NTP=y
BR2_PACKAGE_NTP_NTPDATE=y
BR2_PACKAGE_RPCBIND=y
BR2_PACKAGE_INOTIFY_TOOLS=y
BR2_PACKAGE_TIME=y
BR2_PACKAGE_KMOD_TOOLS=y
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="tx28-apex"
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.karo-electronics.de/karo-tx-uboot.git"
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="KARO-TX-2014-06-04"
BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="board/karo/tx28/apex-extra-uboot-patches_karo"
BR2_TARGET_UBOOT_FORMAT_SB=y
BR2_PACKAGE_HOST_E2FSPROGS=y
BR2_PACKAGE_HOST_GENEXT2FS=y
Regards Johan
-----Oorspronkelijk bericht-----
Van: buildroot-bounces at busybox.net [mailto:buildroot-bounces at busybox.net] Namens Waldemar Brodkorb
Verzonden: vrijdag 11 juli 2014 14:49
Aan: buildroot at buildroot.org
Onderwerp: [Buildroot] [PATCHv3 1/2] linux: add option to explicitly specify the kernel image name
For example the upcoming qemu-xtensa patch is using this feature, where the target is called "zImage", but the resulting kernel name
is "Image.elf".
---
Changes v2 -> v3:
- improve subject (suggested by Thomas P.)
- LINUX_IMAGE_NAME defaults to LINUX_TARGET_NAME (suggested by Yann)
- improve help text (suggested by Yann) Changes v1 -> v2:
- add comment about default value (suggested by Arnout)
- reorder default value for LINUX_TARGET_NAME (suggested by Arnout)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
---
linux/Config.in | 10 ++++++++++
linux/linux.mk | 10 +++++++---
2 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/linux/Config.in b/linux/Config.in index 0a13b13..c13b929 100644
--- a/linux/Config.in
+++ b/linux/Config.in
@@ -244,6 +244,16 @@ config BR2_LINUX_KERNEL_IMAGE_TARGET_NAME
Specify the kernel make target to build the kernel that you
need.
+config BR2_LINUX_KERNEL_IMAGE_NAME
+ string "Kernel image name"
+ depends on BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM
+ help
+ The filename of the kernel image, if it is different from the
+ make target (above). Only Xtensa uses a filename different from
+ the make target. Defaults to BR2_LINUX_KERNEL_IMAGE_TARGET_NAME.
+
+ If unsure, leave it empty.
+
config BR2_LINUX_KERNEL_UIMAGE_LOADADDR
string "load address (for 3.7+ multi-platform image)"
depends on BR2_arm || BR2_armeb
diff --git a/linux/linux.mk b/linux/linux.mk index bd3f2ac..d7e8390 100644
--- a/linux/linux.mk
+++ b/linux/linux.mk
@@ -80,7 +80,8 @@ endif
KERNEL_DTBS = $(addsuffix .dtb,$(KERNEL_DTS_NAME))
ifeq ($(BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM),y)
-LINUX_IMAGE_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
+LINUX_IMAGE_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_NAME))
+LINUX_TARGET_NAME = $(call
+qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
else
ifeq ($(BR2_LINUX_KERNEL_UIMAGE),y)
LINUX_IMAGE_NAME = uImage
@@ -106,6 +107,9 @@ else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ),y) LINUX_IMAGE_NAME = vmlinuz endif endif
+ifeq ($(LINUX_IMAGE_NAME),)
+LINUX_IMAGE_NAME = $(LINUX_TARGET_NAME) endif
LINUX_KERNEL_UIMAGE_LOADADDR=$(call qstrip,$(BR2_LINUX_KERNEL_UIMAGE_LOADADDR))
ifneq ($(LINUX_KERNEL_UIMAGE_LOADADDR),)
@@ -259,7 +263,7 @@ endif
define LINUX_BUILD_CMDS
$(if $(BR2_LINUX_KERNEL_USE_CUSTOM_DTS),
cp $(BR2_LINUX_KERNEL_CUSTOM_DTS_PATH) $(KERNEL_ARCH_PATH)/boot/dts/)
- $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
+ $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D)
+$(LINUX_TARGET_NAME)
@if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ; \
fi
@@ -332,7 +336,7 @@ endif
$(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LINUX_DIR)/.stamp_images_installed
$(BINARIES_DIR)/rootfs.cpio
@$(call MESSAGE,"Rebuilding kernel with initramfs")
# Build the kernel.
- $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
+ $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D)
+$(LINUX_TARGET_NAME)
$(LINUX_APPEND_DTB)
# Copy the kernel image to its final destination
cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
--
1.7.10.4
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-07-17 20:58 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-07-11 12:49 [Buildroot] [PATCHv3 1/2] linux: add option to explicitly specify the kernel image name Waldemar Brodkorb
2014-07-15 19:34 ` Yann E. MORIN
2014-07-15 20:20 ` Thomas Petazzoni
2014-07-16 23:01 ` Sagaert Johan
2014-07-17 15:29 ` [Buildroot] [PATCHv3 1/2] linux: add option to explicitlyspecify the kernel image name : breaks kernel build ! Sagaert Johan
2014-07-17 20:58 ` Thomas Petazzoni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox