* [Buildroot] [PATCH 1/2] package/dovecot: New package
@ 2014-09-28 17:25 Bernd Kuhls
2014-09-28 17:25 ` [Buildroot] [PATCH 2/2] package/dovecot-pigeonhole: " Bernd Kuhls
2014-09-29 17:13 ` [Buildroot] [PATCH 1/2] package/dovecot: " Thomas Petazzoni
0 siblings, 2 replies; 8+ messages in thread
From: Bernd Kuhls @ 2014-09-28 17:25 UTC (permalink / raw)
To: buildroot
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
---
package/Config.in | 1 +
package/dovecot/Config.in | 17 +++++++++++
package/dovecot/dovecot.mk | 72 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 90 insertions(+)
create mode 100644 package/dovecot/Config.in
create mode 100644 package/dovecot/dovecot.mk
diff --git a/package/Config.in b/package/Config.in
index 26dc69c..39084cc 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -930,6 +930,7 @@ menu "Miscellaneous"
endmenu
menu "Mail"
+ source "package/dovecot/Config.in"
source "package/exim/Config.in"
source "package/fetchmail/Config.in"
source "package/heirloom-mailx/Config.in"
diff --git a/package/dovecot/Config.in b/package/dovecot/Config.in
new file mode 100644
index 0000000..a529a54
--- /dev/null
+++ b/package/dovecot/Config.in
@@ -0,0 +1,17 @@
+config BR2_PACKAGE_DOVECOT
+ select BR2_PACKAGE_OPENSSL
+ depends on BR2_INET_IPV6
+ depends on BR2_USE_MMU # fork()
+ bool "dovecot"
+ help
+ Dovecot is an open source IMAP and POP3 email server for Linux/UNIX-
+ like systems, written with security primarily in mind. Dovecot is an
+ excellent choice for both small and large installations. It's fast,
+ simple to set up, requires no special administration and it uses very
+ little memory.
+
+ http://www.dovecot.org
+
+comment "dovecot needs a toolchain w/ ipv6"
+ depends on BR2_USE_MMU
+ depends on !BR2_INET_IPV6
diff --git a/package/dovecot/dovecot.mk b/package/dovecot/dovecot.mk
new file mode 100644
index 0000000..91805a7
--- /dev/null
+++ b/package/dovecot/dovecot.mk
@@ -0,0 +1,72 @@
+################################################################################
+#
+# dovecot
+#
+################################################################################
+
+DOVECOT_VERSION_MAJOR = 2.2
+DOVECOT_VERSION = $(DOVECOT_VERSION_MAJOR).13
+DOVECOT_SITE = http://www.dovecot.org/releases/$(DOVECOT_VERSION_MAJOR)
+DOVECOT_INSTALL_STAGING = YES
+DOVECOT_LICENSE = LGPLv2.1; some exceptions are mentioned in COPYING
+DOVECOT_LICENSE_FILES = COPYING COPYING.LGPL COPYING.MIT
+DOVECOT_DEPENDENCIES = host-pkgconf openssl zlib $(if $(BR2_PACKAGE_LIBICONV),libiconv)
+
+DOVECOT_CONF_ENV= \
+ RPCGEN=__disable_RPCGEN_rquota \
+ i_cv_epoll_works=yes \
+ i_cv_inotify_works=yes \
+ i_cv_posix_fallocate_works=no \
+ i_cv_signed_size_t=no \
+ i_cv_gmtime_max_time_t=32 \
+ i_cv_signed_time_t=yes \
+ i_cv_mmap_plays_with_write=yes \
+ i_cv_fd_passing=yes \
+ i_cv_c99_vsnprintf=yes \
+ lib_cv_va_copy=yes \
+ lib_cv___va_copy=yes \
+ lib_cv_va_val_copy=yes
+
+DOVECOT_CONF_OPT = \
+ --with-dovecot=/usr/lib \
+ --without-dovecot-install-dirs \
+ --libexecdir=/usr/bin/dovecot \
+ --with-moduledir=/usr/lib \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --without-sql \
+ --with-zlib \
+ --with-ssl=openssl \
+ --without-docs
+
+ifeq ($(BR2_PACKAGE_BZIP2),y)
+DOVECOT_CONF_OPT += --with-bzlib
+DOVECOT_DEPENDENCIES += bzip2
+else
+DOVECOT_CONF_OPT += --without-bzlib
+endif
+
+ifeq ($(BR2_PACKAGE_LIBCAP),y)
+DOVECOT_CONF_OPT += --with-libcap
+DOVECOT_DEPENDENCIES += libcap
+else
+DOVECOT_CONF_OPT += --without-libcap
+endif
+
+define DOVECOT_POST_CONFIGURE
+ for i in $$(find $(@D) -name "Makefile"); do \
+ $(SED) 's%^pkglibdir =.*%pkglibdir = \$$(libdir)%' $$i; \
+ $(SED) 's%^pkglibexecdir =.*%pkglibexecdir = \$$(libexecdir)%' $$i; \
+ done
+endef
+
+DOVECOT_POST_CONFIGURE_HOOKS += DOVECOT_POST_CONFIGURE
+
+define DOVECOT_FIX_STAGING_DOVECOT_CONFIG
+ $(SED) 's,^LIBDOVECOT_INCLUDE=.*$$,LIBDOVECOT_INCLUDE=\"-I$(STAGING_DIR)/usr/include/dovecot\",' $(STAGING_DIR)/usr/lib/dovecot-config
+ $(SED) 's,^dovecot_pkglibexecdir=.*$$,dovecot_pkglibexecdir=/usr/bin,' $(STAGING_DIR)/usr/lib/dovecot-config
+endef
+
+DOVECOT_POST_INSTALL_STAGING_HOOKS += DOVECOT_FIX_STAGING_DOVECOT_CONFIG
+
+$(eval $(autotools-package))
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 2/2] package/dovecot-pigeonhole: New package
2014-09-28 17:25 [Buildroot] [PATCH 1/2] package/dovecot: New package Bernd Kuhls
@ 2014-09-28 17:25 ` Bernd Kuhls
2014-09-29 17:14 ` Thomas Petazzoni
2014-09-29 17:13 ` [Buildroot] [PATCH 1/2] package/dovecot: " Thomas Petazzoni
1 sibling, 1 reply; 8+ messages in thread
From: Bernd Kuhls @ 2014-09-28 17:25 UTC (permalink / raw)
To: buildroot
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
---
package/Config.in | 1 +
package/dovecot-pigeonhole/Config.in | 9 +++++++
package/dovecot-pigeonhole/dovecot-pigeonhole.mk | 31 ++++++++++++++++++++++
3 files changed, 41 insertions(+)
create mode 100644 package/dovecot-pigeonhole/Config.in
create mode 100644 package/dovecot-pigeonhole/dovecot-pigeonhole.mk
diff --git a/package/Config.in b/package/Config.in
index 39084cc..8eeead6 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -931,6 +931,7 @@ endmenu
menu "Mail"
source "package/dovecot/Config.in"
+ source "package/dovecot-pigeonhole/Config.in"
source "package/exim/Config.in"
source "package/fetchmail/Config.in"
source "package/heirloom-mailx/Config.in"
diff --git a/package/dovecot-pigeonhole/Config.in b/package/dovecot-pigeonhole/Config.in
new file mode 100644
index 0000000..44320dd
--- /dev/null
+++ b/package/dovecot-pigeonhole/Config.in
@@ -0,0 +1,9 @@
+config BR2_PACKAGE_DOVECOT_PIGEONHOLE
+ bool "dovecot-pigeonhole"
+ depends on BR2_PACKAGE_DOVECOT
+ help
+ Pigeonhole is the name of the project that adds support for the Sieve
+ language (RFC 5228) and the ManageSieve protocol (RFC 5804) to the
+ Dovecot Secure IMAP Server.
+
+ http://pigeonhole.dovecot.org
diff --git a/package/dovecot-pigeonhole/dovecot-pigeonhole.mk b/package/dovecot-pigeonhole/dovecot-pigeonhole.mk
new file mode 100644
index 0000000..a55d2ec
--- /dev/null
+++ b/package/dovecot-pigeonhole/dovecot-pigeonhole.mk
@@ -0,0 +1,31 @@
+################################################################################
+#
+# dovecot-pigeonhole
+#
+################################################################################
+
+DOVECOT_PIGEONHOLE_VERSION = 0.4.3
+DOVECOT_PIGEONHOLE_SOURCE = dovecot-2.2-pigeonhole-$(DOVECOT_PIGEONHOLE_VERSION).tar.gz
+DOVECOT_PIGEONHOLE_SITE = http://pigeonhole.dovecot.org/releases/2.2
+DOVECOT_PIGEONHOLE_LICENSE = LGPLv2.1
+DOVECOT_PIGEONHOLE_LICENSE_FILES = COPYING
+DOVECOT_PIGEONHOLE_DEPENDENCIES = dovecot
+
+DOVECOT_PIGEONHOLE_CONF_OPT = \
+ --with-dovecot=$(STAGING_DIR)/usr/lib \
+ --with-moduledir=/usr/lib \
+ --libexecdir=/usr/bin/dovecot \
+ --sysconfdir=/etc \
+ --localstatedir=/var
+
+define DOVECOT_PIGEONHOLE_POST_CONFIGURE
+ for i in $$(find $(@D) -name "Makefile"); do \
+ $(SED) 's%^pkglibdir =.*%pkglibdir = \$$(libdir)%' $$i; \
+ $(SED) 's%^pkglibexecdir =.*%pkglibexecdir = \$$(libexecdir)%' $$i; \
+ $(SED) 's%^sieve_plugindir =.*%sieve_plugindir = \$$(moduledir)%' $$i; \
+ done
+endef
+
+DOVECOT_PIGEONHOLE_POST_CONFIGURE_HOOKS += DOVECOT_PIGEONHOLE_POST_CONFIGURE
+
+$(eval $(autotools-package))
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 2/2] package/dovecot-pigeonhole: New package
2014-09-28 17:25 ` [Buildroot] [PATCH 2/2] package/dovecot-pigeonhole: " Bernd Kuhls
@ 2014-09-29 17:14 ` Thomas Petazzoni
0 siblings, 0 replies; 8+ messages in thread
From: Thomas Petazzoni @ 2014-09-29 17:14 UTC (permalink / raw)
To: buildroot
Dear Bernd Kuhls,
On Sun, 28 Sep 2014 19:25:37 +0200, Bernd Kuhls wrote:
> diff --git a/package/dovecot-pigeonhole/dovecot-pigeonhole.mk b/package/dovecot-pigeonhole/dovecot-pigeonhole.mk
> new file mode 100644
> index 0000000..a55d2ec
> --- /dev/null
> +++ b/package/dovecot-pigeonhole/dovecot-pigeonhole.mk
> @@ -0,0 +1,31 @@
> +################################################################################
> +#
> +# dovecot-pigeonhole
> +#
> +################################################################################
> +
> +DOVECOT_PIGEONHOLE_VERSION = 0.4.3
> +DOVECOT_PIGEONHOLE_SOURCE = dovecot-2.2-pigeonhole-$(DOVECOT_PIGEONHOLE_VERSION).tar.gz
> +DOVECOT_PIGEONHOLE_SITE = http://pigeonhole.dovecot.org/releases/2.2
> +DOVECOT_PIGEONHOLE_LICENSE = LGPLv2.1
LGPLv2.1 or LGPLv2.1+ ?
> +DOVECOT_PIGEONHOLE_LICENSE_FILES = COPYING
> +DOVECOT_PIGEONHOLE_DEPENDENCIES = dovecot
> +
> +DOVECOT_PIGEONHOLE_CONF_OPT = \
> + --with-dovecot=$(STAGING_DIR)/usr/lib \
> + --with-moduledir=/usr/lib \
> + --libexecdir=/usr/bin/dovecot \
Same question as dovecot: really /usr/bin/dovecot ?
> + --sysconfdir=/etc \
> + --localstatedir=/var
> +
> +define DOVECOT_PIGEONHOLE_POST_CONFIGURE
> + for i in $$(find $(@D) -name "Makefile"); do \
> + $(SED) 's%^pkglibdir =.*%pkglibdir = \$$(libdir)%' $$i; \
> + $(SED) 's%^pkglibexecdir =.*%pkglibexecdir = \$$(libexecdir)%' $$i; \
> + $(SED) 's%^sieve_plugindir =.*%sieve_plugindir = \$$(moduledir)%' $$i; \
> + done
> +endef
> +
> +DOVECOT_PIGEONHOLE_POST_CONFIGURE_HOOKS += DOVECOT_PIGEONHOLE_POST_CONFIGURE
Like for dovecot.mk, it might be good to have a short comment above
explaining what's going on here.
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 1/2] package/dovecot: New package
2014-09-28 17:25 [Buildroot] [PATCH 1/2] package/dovecot: New package Bernd Kuhls
2014-09-28 17:25 ` [Buildroot] [PATCH 2/2] package/dovecot-pigeonhole: " Bernd Kuhls
@ 2014-09-29 17:13 ` Thomas Petazzoni
2014-10-03 9:33 ` Bernd Kuhls
2014-10-03 14:12 ` Bernd Kuhls
1 sibling, 2 replies; 8+ messages in thread
From: Thomas Petazzoni @ 2014-09-29 17:13 UTC (permalink / raw)
To: buildroot
Dear Bernd Kuhls,
On Sun, 28 Sep 2014 19:25:36 +0200, Bernd Kuhls wrote:
> +DOVECOT_VERSION_MAJOR = 2.2
> +DOVECOT_VERSION = $(DOVECOT_VERSION_MAJOR).13
> +DOVECOT_SITE = http://www.dovecot.org/releases/$(DOVECOT_VERSION_MAJOR)
> +DOVECOT_INSTALL_STAGING = YES
> +DOVECOT_LICENSE = LGPLv2.1; some exceptions are mentioned in COPYING
I think we generally say only "<foo> with exceptions".
Did you check that it's LGPLv2.1 vs. LGPLv2.1+ ?
> +DOVECOT_LICENSE_FILES = COPYING COPYING.LGPL COPYING.MIT
> +DOVECOT_DEPENDENCIES = host-pkgconf openssl zlib $(if $(BR2_PACKAGE_LIBICONV),libiconv)
If you do this with libiconv, then don't you need:
select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
libiconv is a replacement for the missing iconv stuff in libc when
locale support is not enabled.
If zlib is really a mandatory dependency, then it should be selected
from the Config.in file.
> +DOVECOT_CONF_OPT = \
> + --with-dovecot=/usr/lib \
> + --without-dovecot-install-dirs \
> + --libexecdir=/usr/bin/dovecot \
This looks weird. You really want /usr/bin/dovecot as a lib directory?
Shouldn't this be /usr/lib/dovecot instead?
> + --with-moduledir=/usr/lib \
> + --sysconfdir=/etc \
> + --localstatedir=/var \
> + --without-sql \
> + --with-zlib \
Optional dependency?
> + --with-ssl=openssl \
Ditto?
> + --without-docs
> +
> +ifeq ($(BR2_PACKAGE_BZIP2),y)
> +DOVECOT_CONF_OPT += --with-bzlib
> +DOVECOT_DEPENDENCIES += bzip2
> +else
> +DOVECOT_CONF_OPT += --without-bzlib
> +endif
> +
> +ifeq ($(BR2_PACKAGE_LIBCAP),y)
> +DOVECOT_CONF_OPT += --with-libcap
> +DOVECOT_DEPENDENCIES += libcap
> +else
> +DOVECOT_CONF_OPT += --without-libcap
> +endif
> +
> +define DOVECOT_POST_CONFIGURE
> + for i in $$(find $(@D) -name "Makefile"); do \
> + $(SED) 's%^pkglibdir =.*%pkglibdir = \$$(libdir)%' $$i; \
> + $(SED) 's%^pkglibexecdir =.*%pkglibexecdir = \$$(libexecdir)%' $$i; \
> + done
> +endef
> +
> +DOVECOT_POST_CONFIGURE_HOOKS += DOVECOT_POST_CONFIGURE
> +
> +define DOVECOT_FIX_STAGING_DOVECOT_CONFIG
> + $(SED) 's,^LIBDOVECOT_INCLUDE=.*$$,LIBDOVECOT_INCLUDE=\"-I$(STAGING_DIR)/usr/include/dovecot\",' $(STAGING_DIR)/usr/lib/dovecot-config
> + $(SED) 's,^dovecot_pkglibexecdir=.*$$,dovecot_pkglibexecdir=/usr/bin,' $(STAGING_DIR)/usr/lib/dovecot-config
> +endef
dovecot-config is in $(STAGING_DIR)/usr/lib ? This looks weird.
> +
> +DOVECOT_POST_INSTALL_STAGING_HOOKS += DOVECOT_FIX_STAGING_DOVECOT_CONFIG
> +
> +$(eval $(autotools-package))
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 1/2] package/dovecot: New package
2014-09-29 17:13 ` [Buildroot] [PATCH 1/2] package/dovecot: " Thomas Petazzoni
@ 2014-10-03 9:33 ` Bernd Kuhls
2014-10-03 11:40 ` Thomas Petazzoni
2014-10-03 14:12 ` Bernd Kuhls
1 sibling, 1 reply; 8+ messages in thread
From: Bernd Kuhls @ 2014-10-03 9:33 UTC (permalink / raw)
To: buildroot
Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
@public.gmane.org> wrote in news:20140929191314.36b87a70 at free-electrons.com:
> Did you check that it's LGPLv2.1 vs. LGPLv2.1+ ?
Hi,
how to do that?
Are the websites where I can upload license files for checking?
I compared http://www.gnu.org/licenses/lgpl-2.1.txt and
http://www.dovecot.org/doc/COPYING.LGPL, they are 100% identical.
http://www.dovecot.org/doc/COPYING says:
"Everything else is LGPLv2.1 (see COPYING.LGPL) unless otherwise mentioned
at the beginning of the file."
Regards, Bernd
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 1/2] package/dovecot: New package
2014-10-03 9:33 ` Bernd Kuhls
@ 2014-10-03 11:40 ` Thomas Petazzoni
2014-10-03 12:32 ` Bernd Kuhls
0 siblings, 1 reply; 8+ messages in thread
From: Thomas Petazzoni @ 2014-10-03 11:40 UTC (permalink / raw)
To: buildroot
Dear Bernd Kuhls,
On Fri, 03 Oct 2014 11:33:15 +0200, Bernd Kuhls wrote:
> how to do that?
> Are the websites where I can upload license files for checking?
>
> I compared http://www.gnu.org/licenses/lgpl-2.1.txt and
> http://www.dovecot.org/doc/COPYING.LGPL, they are 100% identical.
>
> http://www.dovecot.org/doc/COPYING says:
> "Everything else is LGPLv2.1 (see COPYING.LGPL) unless otherwise mentioned
> at the beginning of the file."
Regarding LGPLv2.1 vs. LGPLv2.1+ it's not written in the license text
(the license text is just one particular version), but in the header of
each source file, where you have a "(or later)" specification if it's
with "+", or no such specification when it's just one particular
version that applies.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 1/2] package/dovecot: New package
2014-09-29 17:13 ` [Buildroot] [PATCH 1/2] package/dovecot: " Thomas Petazzoni
2014-10-03 9:33 ` Bernd Kuhls
@ 2014-10-03 14:12 ` Bernd Kuhls
1 sibling, 0 replies; 8+ messages in thread
From: Bernd Kuhls @ 2014-10-03 14:12 UTC (permalink / raw)
To: buildroot
Hi,
Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
@public.gmane.org> wrote in news:20140929191314.36b87a70 at free-
electrons.com:
>> +DOVECOT_CONF_OPT = \
>> + --with-dovecot=/usr/lib \
>> + --without-dovecot-install-dirs \
>> + --libexecdir=/usr/bin/dovecot \
>
> This looks weird. You really want /usr/bin/dovecot as a lib directory?
> Shouldn't this be /usr/lib/dovecot instead?
$libexecdir contains binary files, not libs
$ ls -la usr/libexec/
insgesamt 5384
drwxrwxr-x 2 fli4l fli4l 4096 Okt 3 15:07 .
drwxrwxr-x 8 fli4l fli4l 4096 Okt 3 15:07 ..
-rwxr-xr-x 1 fli4l fli4l 45472 Okt 3 15:07 aggregator
-rwxr-xr-x 1 fli4l fli4l 46046 Okt 3 15:07 anvil
-rwxr-xr-x 1 fli4l fli4l 1073617 Okt 3 15:07 auth
-rwxr-xr-x 1 fli4l fli4l 13026 Okt 3 15:07 checkpassword-reply
-rwxr-xr-x 1 fli4l fli4l 216800 Okt 3 15:07 config
-rwxr-xr-x 1 fli4l fli4l 2839 Okt 3 15:07 decode2text.sh
lrwxrwxrwx 1 fli4l fli4l 11 Okt 3 15:07 deliver -> dovecot-lda
-rwxr-xr-x 1 fli4l fli4l 167149 Okt 3 15:07 dict
-rwxr-xr-x 1 fli4l fli4l 213021 Okt 3 15:07 director
-rwxr-xr-x 1 fli4l fli4l 20330 Okt 3 15:07 dns-client
-rwxr-xr-x 1 fli4l fli4l 1016161 Okt 3 15:07 doveadm-server
-rwxr-xr-x 1 fli4l fli4l 71817 Okt 3 15:07 dovecot-lda
-rwxr-xr-x 1 fli4l fli4l 11762 Okt 3 15:07 gdbhelper
-rwxr-xr-x 1 fli4l fli4l 931236 Okt 3 15:07 imap
-rwxr-xr-x 1 fli4l fli4l 73946 Okt 3 15:07 imap-login
-rwxr-xr-x 1 fli4l fli4l 46435 Okt 3 15:07 imap-urlauth
-rwxr-xr-x 1 fli4l fli4l 26963 Okt 3 15:07 imap-urlauth-login
-rwxr-xr-x 1 fli4l fli4l 129652 Okt 3 15:07 imap-urlauth-worker
-rwxr-xr-x 1 fli4l fli4l 65959 Okt 3 15:07 indexer
-rwxr-xr-x 1 fli4l fli4l 69629 Okt 3 15:07 indexer-worker
-rwxr-xr-x 1 fli4l fli4l 46971 Okt 3 15:07 ipc
-rwxr-xr-x 1 fli4l fli4l 158678 Okt 3 15:07 lmtp
-rwxr-xr-x 1 fli4l fli4l 47096 Okt 3 15:07 log
-rwxr-xr-x 1 fli4l fli4l 16133 Okt 3 15:07 maildirlock
-rwxr-xr-x 1 fli4l fli4l 122073 Okt 3 15:07 pop3
-rwxr-xr-x 1 fli4l fli4l 56652 Okt 3 15:07 pop3-login
-rwxr-xr-x 1 fli4l fli4l 384370 Okt 3 15:07 quota-status
-rwxr-xr-x 1 fli4l fli4l 28107 Okt 3 15:07 rawlog
-rwxr-xr-x 1 fli4l fli4l 94576 Okt 3 15:07 replicator
-rwxr-xr-x 1 fli4l fli4l 22063 Okt 3 15:07 script
-rwxr-xr-x 1 fli4l fli4l 22352 Okt 3 15:07 script-login
-rwxr-xr-x 1 fli4l fli4l 43799 Okt 3 15:07 ssl-params
-rwxr-xr-x 1 fli4l fli4l 130070 Okt 3 15:07 stats
-rwxr-xr-x 1 fli4l fli4l 27626 Okt 3 15:07 xml2text
Nonetheless I removed that and similar options from the package so it
installs all files to their default paths. Locally I need other paths,
their options are part of v1 of this patch and will be removed in v2, I
will keep my adjustments in a private patch.
> dovecot-config is in $(STAGING_DIR)/usr/lib ? This looks weird.
Correct, thats the default path for this file.
Regards, Bernd
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-10-03 14:12 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-28 17:25 [Buildroot] [PATCH 1/2] package/dovecot: New package Bernd Kuhls
2014-09-28 17:25 ` [Buildroot] [PATCH 2/2] package/dovecot-pigeonhole: " Bernd Kuhls
2014-09-29 17:14 ` Thomas Petazzoni
2014-09-29 17:13 ` [Buildroot] [PATCH 1/2] package/dovecot: " Thomas Petazzoni
2014-10-03 9:33 ` Bernd Kuhls
2014-10-03 11:40 ` Thomas Petazzoni
2014-10-03 12:32 ` Bernd Kuhls
2014-10-03 14:12 ` Bernd Kuhls
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox