* [Buildroot] Buildroot autobuilders - Cleanup faulty tarballs
@ 2014-12-15 23:03 Yann E. MORIN
2014-12-16 7:02 ` Thomas Petazzoni
0 siblings, 1 reply; 4+ messages in thread
From: Yann E. MORIN @ 2014-12-15 23:03 UTC (permalink / raw)
To: buildroot
Hello gyus!
You all have one or more autobuilders submitting results. Thank you for
the efforts of running them! :-)
Recently, SourceForge has started to act strangely, and can serve faulty
tarballs. Those break the build, especially since a lot of packages do
not yet have a .hash file.
I am in the process of adding hashes for all SourceForget hosted
packages, but in the meantime, the build failures continue to pile up.
Could you please remove the tarballs from SF-hosted packages on each
autobuilder instance you are running, please? You'll find that list
below.
Thank you!
Regards,
Yann E. MORIN.
Package Tarball
-----------------------------------------------------------
acpid acpid-2.0.22.tar.xz
aespipe aespipe-v2.4c.tar.bz2
armadillo armadillo-4.000.4.tar.gz
beecrypt beecrypt-4.2.1.tar.gz
bellagio libomxil-bellagio-0.9.3.tar.gz
blackbox blackbox-0.70.1.tar.bz2
boost boost_1_56_0.tar.bz2
bootutils bootutils-1.0.0.tar.gz
ccrypt ccrypt-1.10.tar.gz
cegui06 CEGUI-0.6.2b.tar.gz
cppcms cppcms-1.0.4.tar.bz2
cramfs cramfs-1.1.tar.gz
curlftpfs curlftpfs-0.9.2.tar.gz
dbus-cpp libdbus-c++-0.9.0.tar.gz
dtach dtach-0.8.tar.gz
duma duma_2_5_15.tar.gz
dvbsnoop dvbsnoop-1.4.50.tar.gz
empty empty-0.6.19b.tgz
espeak espeak-1.48.04-source.zip
expat expat-2.1.0.tar.gz
expect expect5.45.tar.gz
ezxml ezxml-0.8.6.tar.gz
fdk-aac fdk-aac-0.1.3.tar.gz
fetchmail fetchmail-6.3.26.tar.xz
flex flex-2.5.37.tar.gz
fluxbox fluxbox-1.3.5.tar.bz2
fxload fxload-2008_10_13.tar.gz
genext2fs genext2fs-1.4.1.tar.gz
genromfs genromfs-0.5.2.tar.gz
gnu-efi gnu-efi_3.0u.orig.tar.gz
gptfdisk gptfdisk-0.8.6.tar.gz
gqview gqview-2.1.5.tar.gz
gtkperf gtkperf_0.40.tar.gz
gutenprint gutenprint-5.2.9.tar.bz2
haserl haserl-0.9.33.tar.gz
hplip hplip-3.13.10.tar.gz
igmpproxy igmpproxy-0.1.tar.gz
imlib2 imlib2-1.4.5.tar.bz2
iperf iperf-2.0.5.tar.gz
ipmitool ipmitool-1.8.14.tar.bz2
iprutils iprutils-2.4.5-src.tgz
irda-utils irda-utils-0.9.18.tar.gz
jamvm jamvm-2.0.0.tar.gz
joe joe-3.7.tar.gz
jpeg-turbo libjpeg-turbo-1.3.1.tar.gz
lame lame-3.99.5.tar.gz
lbreakout2 lbreakout2-2.6.4.tar.gz
lcdproc lcdproc-0.5.7.tar.gz
lcms2 lcms2-2.5.tar.gz
lesstif lesstif-0.95.2.tar.bz2
libargtable2 argtable2-13.tar.gz
libcdaudio libcdaudio-0.99.12p2.tar.gz
libcgi libcgi-1.0.tar.gz
libcgroup libcgroup-0.41.tar.bz2
libcue libcue-1.4.0.tar.bz2
libdmtx libdmtx-0.7.4.tar.gz
libdnet libdnet-1.11.tar.gz
libexif libexif-0.6.21.tar.bz2
libfuse fuse-2.9.3.tar.gz
libglew glew-1.10.0.tgz
libical libical-0.48.tar.gz
libid3tag libid3tag-0.15.1b.tar.gz
libjson libjson_7.6.1.zip
libmad libmad-0.15.1b.tar.gz
libmcrypt libmcrypt-2.5.8.tar.gz
libmhash mhash-0.9.9.9.tar.bz2
libmms libmms-0.6.2.tar.gz
libmodplug libmodplug-0.8.8.5.tar.gz
libmpeg2 libmpeg2-0.5.1.tar.gz
liboauth liboauth-1.0.3.tar.gz
libpfm4 libpfm-4.3.0.tar.gz
librsync librsync-0.9.7.tar.gz
libseccomp libseccomp-2.1.1.tar.gz
libserial libserial-0.6.0rc1.tar.gz
libsysfs sysfsutils-2.1.0.tar.gz
libungif libungif-4.1.4.tar.bz2
libupnp libupnp-1.6.19.tar.bz2
libusb-compat libusb-compat-0.1.5.tar.bz2
libusb libusb-1.0.19.tar.bz2
libvncserver LibVNCServer-0.9.9.tar.gz
libxmlrpc xmlrpc-c-1.25.26.tgz
linknx linknx-0.0.1.32.tar.gz
lmbench lmbench-3.0-a9.tgz
log4cplus log4cplus-1.1.2.tar.xz
logsurfer logsurfer-1.8.tar.gz
ltp-testsuite ltp-full-20140115.tar.xz
ltris ltris-1.0.19.tar.gz
madplay madplay-0.15.2b.tar.gz
mcrypt mcrypt-2.6.8.tar.gz
minidlna minidlna-1.1.4.tar.gz
modplugtools modplugtools-0.5.3.tar.gz
msgpack msgpack-0.5.4.tar.gz
msmtp msmtp-1.4.32.tar.bz2
mutt mutt-1.5.23.tar.gz
nanocom nanocom.tar.gz
nbd nbd-3.8.tar.xz
netcat netcat-0.7.1.tar.gz
nfs-utils nfs-utils-1.2.6.tar.bz2
ngrep ngrep-1.45.tar.bz2
ocf-linux ocf-linux-20120127.tar.gz
odhcploc odhcploc-20111021.tar.gz
opencore-amr opencore-amr-0.1.3.tar.gz
openocd openocd-0.5.0.tar.bz2
oprofile oprofile-0.9.9.tar.gz
p910nd p910nd-0.97.tar.bz2
pcmanfm pcmanfm-0.3.5.9.tar.gz
poco poco-1.4.6p1-all.tar.gz
prboom prboom-2.5.0.tar.gz
proxychains-ng proxychains-4.6.tar.bz2
psmisc psmisc-22.21.tar.gz
ptpd2 ptpd-2.3.0.tar.gz
ptpd ptpd-1.1.0.tar.gz
python-dialog python2-pythondialog-3.0.1.tar.bz2
python-id3 id3-py_1.2.tar.gz
python-numpy numpy-1.8.0.tar.gz
python-pyparsing pyparsing-2.0.2.tar.gz
qwt qwt-6.1.0.tar.bz2
rpcbind rpcbind-0.2.1.tar.bz2
scons scons-2.3.0.tar.gz
ser2net ser2net-2.10.0.tar.gz
sispmctl sispmctl-3.1.tar.gz
smartmontools smartmontools-6.3.tar.gz
sox sox-14.4.1.tar.gz
squashfs squashfs4.3.tar.gz
sshfs sshfs-fuse-2.5.tar.gz
sshpass sshpass-1.05.tar.gz
strace strace-4.9.tar.xz
swig swig-2.0.12.tar.gz
synergy synergy-1.3.1.tar.gz
tclap tclap-1.2.1.tar.gz
tcllib tcllib-1.13.tar.bz2
tinyhttpd tinyhttpd-0.1.0.tar.gz
tmux tmux-1.9a.tar.gz
tn5250 tn5250-0.17.4.tar.gz
twolame twolame-0.3.13.tar.gz
upx upx-3.91-src.tar.bz2
vde2 vde2-2.3.2.tar.bz2
vo-aacenc vo-aacenc-0.1.3.tar.gz
vtun vtun-3.0.3.tar.gz
wipe wipe-2.3.1.tar.bz2
x11vnc x11vnc-0.9.13.tar.gz
xmlstarlet xmlstarlet-1.5.0.tar.gz
zd1211-firmware zd1211-firmware-1.4.tar.bz2
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 4+ messages in thread* [Buildroot] Buildroot autobuilders - Cleanup faulty tarballs
2014-12-15 23:03 [Buildroot] Buildroot autobuilders - Cleanup faulty tarballs Yann E. MORIN
@ 2014-12-16 7:02 ` Thomas Petazzoni
2014-12-16 17:31 ` Yann E. MORIN
0 siblings, 1 reply; 4+ messages in thread
From: Thomas Petazzoni @ 2014-12-16 7:02 UTC (permalink / raw)
To: buildroot
Dear Yann E. MORIN,
On Tue, 16 Dec 2014 00:03:40 +0100, Yann E. MORIN wrote:
> Could you please remove the tarballs from SF-hosted packages on each
> autobuilder instance you are running, please? You'll find that list
> below.
Done. Note that I did not simply remove the Sourceforge tarballs, but
simply completely removed the download directories of each autobuild
instance I was managing. This has two consequences:
* A few invalid failures being reported, such as
http://autobuild.buildroot.org/results/8da/8daafed00348b4498c7dfe2b34e060338b2f10eb/build-end.log.
There should be no more than the number of instances I was taking of
(4 on the Free Electrons build server, 4 on the gcc75 machine).
* Probably a higher number of reports about failed downloads, since
wiping out the download directory means that the next builds will
re-download everything they need, which gives a higher probability
of downloading tarballs that have disappeared, or trying to reach
hosts that are down, etc.
Thanks,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] Buildroot autobuilders - Cleanup faulty tarballs
2014-12-16 7:02 ` Thomas Petazzoni
@ 2014-12-16 17:31 ` Yann E. MORIN
2014-12-16 20:02 ` Thomas Petazzoni
0 siblings, 1 reply; 4+ messages in thread
From: Yann E. MORIN @ 2014-12-16 17:31 UTC (permalink / raw)
To: buildroot
Thomas, All,
On 2014-12-16 08:02 +0100, Thomas Petazzoni spake thusly:
> On Tue, 16 Dec 2014 00:03:40 +0100, Yann E. MORIN wrote:
>
> > Could you please remove the tarballs from SF-hosted packages on each
> > autobuilder instance you are running, please? You'll find that list
> > below.
>
> Done.
OK, thank you! :-)
[--SNIP--]
> * Probably a higher number of reports about failed downloads, since
> wiping out the download directory means that the next builds will
> re-download everything they need, which gives a higher probability
> of downloading tarballs that have disappeared, or trying to reach
> hosts that are down, etc.
Are you running your instances without a backup mirror configured? I
believe this is a good thing, because it will help find the missing
upstreams.
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] Buildroot autobuilders - Cleanup faulty tarballs
2014-12-16 17:31 ` Yann E. MORIN
@ 2014-12-16 20:02 ` Thomas Petazzoni
0 siblings, 0 replies; 4+ messages in thread
From: Thomas Petazzoni @ 2014-12-16 20:02 UTC (permalink / raw)
To: buildroot
Dear Yann E. MORIN,
On Tue, 16 Dec 2014 18:31:49 +0100, Yann E. MORIN wrote:
> > * Probably a higher number of reports about failed downloads, since
> > wiping out the download directory means that the next builds will
> > re-download everything they need, which gives a higher probability
> > of downloading tarballs that have disappeared, or trying to reach
> > hosts that are down, etc.
>
> Are you running your instances without a backup mirror configured? I
> believe this is a good thing, because it will help find the missing
> upstreams.
Nope, I'm using the regular Buildroot configuration, so it does use
sources.buildroot.net.
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-12-16 20:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-15 23:03 [Buildroot] Buildroot autobuilders - Cleanup faulty tarballs Yann E. MORIN
2014-12-16 7:02 ` Thomas Petazzoni
2014-12-16 17:31 ` Yann E. MORIN
2014-12-16 20:02 ` Thomas Petazzoni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox