* [Buildroot] [git commit] rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
@ 2015-03-04 20:27 Thomas Petazzoni
2015-03-04 21:58 ` Arnout Vandecappelle
0 siblings, 1 reply; 4+ messages in thread
From: Thomas Petazzoni @ 2015-03-04 20:27 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=4e92ffdc47cc4c857c5d635b4583a61bc4b3cb08
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/rpi-firmware/Config.in | 11 -----------
1 files changed, 0 insertions(+), 11 deletions(-)
diff --git a/package/rpi-firmware/Config.in b/package/rpi-firmware/Config.in
index 80ba88a..cd45be4 100644
--- a/package/rpi-firmware/Config.in
+++ b/package/rpi-firmware/Config.in
@@ -45,15 +45,4 @@ config BR2_PACKAGE_RPI_FIRMWARE_BOOT
default "_x" if BR2_PACKAGE_RPI_FIRMWARE_X
default "_cd" if BR2_PACKAGE_RPI_FIRMWARE_CD
-config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
- bool "Install Device Tree Blobs (DTBs)"
- help
- Say 'y' here if you want to boot your kernel that has support
- for the device tree.
-
- Note that the defconfig files in the Raspberry Pi fork of the
- Linux kernel do not enable support for the Device Tree. You'll
- have to provide your own Linux config or defconfig file with
- device tree enabled, to make use of those DTBs.
-
endif # BR2_PACKAGE_RPI_FIRMWARE
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Buildroot] [git commit] rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
2015-03-04 20:27 [Buildroot] [git commit] rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS Thomas Petazzoni
@ 2015-03-04 21:58 ` Arnout Vandecappelle
2015-03-04 22:05 ` Thomas Petazzoni
0 siblings, 1 reply; 4+ messages in thread
From: Arnout Vandecappelle @ 2015-03-04 21:58 UTC (permalink / raw)
To: buildroot
On 04/03/15 21:27, Thomas Petazzoni wrote:
> commit: http://git.buildroot.net/buildroot/commit/?id=4e92ffdc47cc4c857c5d635b4583a61bc4b3cb08
> branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
>
> Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
> package/rpi-firmware/Config.in | 11 -----------
> 1 files changed, 0 insertions(+), 11 deletions(-)
>
> diff --git a/package/rpi-firmware/Config.in b/package/rpi-firmware/Config.in
> index 80ba88a..cd45be4 100644
> --- a/package/rpi-firmware/Config.in
> +++ b/package/rpi-firmware/Config.in
> @@ -45,15 +45,4 @@ config BR2_PACKAGE_RPI_FIRMWARE_BOOT
> default "_x" if BR2_PACKAGE_RPI_FIRMWARE_X
> default "_cd" if BR2_PACKAGE_RPI_FIRMWARE_CD
>
> -config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
Is there no legacy handling needed?
Regards,
Arnout
> - bool "Install Device Tree Blobs (DTBs)"
> - help
> - Say 'y' here if you want to boot your kernel that has support
> - for the device tree.
> -
> - Note that the defconfig files in the Raspberry Pi fork of the
> - Linux kernel do not enable support for the Device Tree. You'll
> - have to provide your own Linux config or defconfig file with
> - device tree enabled, to make use of those DTBs.
> -
> endif # BR2_PACKAGE_RPI_FIRMWARE
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [git commit] rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
2015-03-04 21:58 ` Arnout Vandecappelle
@ 2015-03-04 22:05 ` Thomas Petazzoni
2015-03-05 0:14 ` Arnout Vandecappelle
0 siblings, 1 reply; 4+ messages in thread
From: Thomas Petazzoni @ 2015-03-04 22:05 UTC (permalink / raw)
To: buildroot
Dear Arnout Vandecappelle,
On Wed, 04 Mar 2015 22:58:49 +0100, Arnout Vandecappelle wrote:
> > -config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
>
> Is there no legacy handling needed?
I thought about this, but my reasoning is that since the package now
installs the DTBs unconditionally, the behavior is now the same as
having this option =y, and therefore there is no need for legacy
handling.
Did I miss something?
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [git commit] rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
2015-03-04 22:05 ` Thomas Petazzoni
@ 2015-03-05 0:14 ` Arnout Vandecappelle
0 siblings, 0 replies; 4+ messages in thread
From: Arnout Vandecappelle @ 2015-03-05 0:14 UTC (permalink / raw)
To: buildroot
On 04/03/15 23:05, Thomas Petazzoni wrote:
> Dear Arnout Vandecappelle,
>
> On Wed, 04 Mar 2015 22:58:49 +0100, Arnout Vandecappelle wrote:
>
> >> -config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
> >
> > Is there no legacy handling needed?
>
> I thought about this, but my reasoning is that since the package now
> installs the DTBs unconditionally, the behavior is now the same as
> having this option =y, and therefore there is no need for legacy
> handling.
Yep makes sense.
Regards,
Arnout
>
> Did I miss something?
>
> Thomas
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-03-05 0:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-03-04 20:27 [Buildroot] [git commit] rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS Thomas Petazzoni
2015-03-04 21:58 ` Arnout Vandecappelle
2015-03-04 22:05 ` Thomas Petazzoni
2015-03-05 0:14 ` Arnout Vandecappelle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox