[Buildroot] [PATCH 1/1] configs: update config for Atmel SAMA5D3 Xplained board

[Alexandre Belloni <alexandre.belloni@free-electrons.com>]

On 05/03/2015 at 12:30:54 +0100, Thomas Petazzoni wrote :
> Dear Ryan Barnett,
> 
> On Wed,  4 Mar 2015 21:36:30 -0600, Ryan Barnett wrote:
> > Update configuration to use the 3.18.8 kernel and update U-Boot to
> > 2015.01. With the switch to 2015.01. use the U-Boot SPL image for the
> > first stage bootloader instead of the at91bootstrap. The U-Boot SPL
> > requires that the U-Boot image format be u-boot.img in order to load
> > from the SD card.
> > 
> > Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
> > ---
> >  board/atmel/xplained/readme.txt  |  4 ++--
> >  configs/atmel_xplained_defconfig | 16 +++++++---------
> >  2 files changed, 9 insertions(+), 11 deletions(-)
> 
> I've tested this on HW, and applied, thanks!
> 
> Now that there is a sama5d4 Xplained board, maybe we should rename this

The sama5d4 Xplained real name is actually sama5d4 Xplained Ultra. That
would probably be different enough, unless Linux starts running on the
MCUs.


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com