[Buildroot] [PATCH v2] configs/acmesystems_aria_g25: new configs

* [Buildroot] [PATCH v2] configs/acmesystems_aria_g25: new configs
@ 2015-06-29 21:38 Gustavo Zacarias
  2015-06-30  3:23 ` Baruch Siach
  2015-06-30 10:21 ` Angelo Compagnucci
  0 siblings, 2 replies; 7+ messages in thread
From: Gustavo Zacarias @ 2015-06-29 21:38 UTC (permalink / raw)
  To: buildroot

Add new basic configurations for ACME Systems ARIA G25 SOM.
There are two different variants, a 128MB and a 256MB RAM model.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
---
 .../aria-g25/at91bootstrap_aria_g25_128mb.config   |  9 ++++
 .../aria-g25/at91bootstrap_aria_g25_256mb.config   |  9 ++++
 board/acmesystems/aria-g25/readme.txt              | 48 ++++++++++++++++++++++
 configs/acmesystems_aria_g25_128mb_defconfig       | 24 +++++++++++
 configs/acmesystems_aria_g25_256mb_defconfig       | 24 +++++++++++
 5 files changed, 114 insertions(+)
 create mode 100644 board/acmesystems/aria-g25/at91bootstrap_aria_g25_128mb.config
 create mode 100644 board/acmesystems/aria-g25/at91bootstrap_aria_g25_256mb.config
 create mode 100644 board/acmesystems/aria-g25/readme.txt
 create mode 100644 configs/acmesystems_aria_g25_128mb_defconfig
 create mode 100644 configs/acmesystems_aria_g25_256mb_defconfig

diff --git a/board/acmesystems/aria-g25/at91bootstrap_aria_g25_128mb.config b/board/acmesystems/aria-g25/at91bootstrap_aria_g25_128mb.config
new file mode 100644
index 0000000..9be0545
--- /dev/null
+++ b/board/acmesystems/aria-g25/at91bootstrap_aria_g25_128mb.config
@@ -0,0 +1,9 @@
+CONFIG_AT91SAM9X5_ARIA=y
+CONFIG_BUS_SPEED_100MHZ=y
+CONFIG_RAM_128MB=y
+CONFIG_SDCARD=y
+CONFIG_LOAD_LINUX=y
+CONFIG_LINUX_ZIMAGE=y
+CONFIG_LINUX_KERNEL_ARG_STRING="mem=128M console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
+CONFIG_DEBUG=y
+CONFIG_THUMB=y
diff --git a/board/acmesystems/aria-g25/at91bootstrap_aria_g25_256mb.config b/board/acmesystems/aria-g25/at91bootstrap_aria_g25_256mb.config
new file mode 100644
index 0000000..546c62c
--- /dev/null
+++ b/board/acmesystems/aria-g25/at91bootstrap_aria_g25_256mb.config
@@ -0,0 +1,9 @@
+CONFIG_AT91SAM9X5_ARIA=y
+CONFIG_BUS_SPEED_100MHZ=y
+CONFIG_RAM_256MB=y
+CONFIG_SDCARD=y
+CONFIG_LOAD_LINUX=y
+CONFIG_LINUX_ZIMAGE=y
+CONFIG_LINUX_KERNEL_ARG_STRING="mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
+CONFIG_DEBUG=y
+CONFIG_THUMB=y
diff --git a/board/acmesystems/aria-g25/readme.txt b/board/acmesystems/aria-g25/readme.txt
new file mode 100644
index 0000000..374cf1c
--- /dev/null
+++ b/board/acmesystems/aria-g25/readme.txt
@@ -0,0 +1,48 @@
+Build instructions
+==================
+
+As a regular user configure and then build:
+
+$ make acmesystems_aria_g25_defconfig
+$ make
+
+Writing to the MicroSD card
+===========================
+
+Assuming your Aria G25 baseboard has a MicroSD socket, for example with
+the Terra baseboard, you'll need a blank MicroSD (obviously) initialized
+in a particular way to be able to boot from it.
+
+Assuming the card is seen as /dev/sdb in your PC/laptop/other device
+you'll need to run the following commands as root or via sudo.
+
+Make sure all of the card partitions are unmounted before starting.
+
+First we'll need to create two partitions:
+
+# sfdisk -uM /dev/sdb <<EOF
+,32,6
+;
+EOF
+
+Then we'll need to create the empty filesystems:
+
+# mkdosfs -n SD_BOOT /dev/sdb1
+# mkfs.ext4 -L SD_ROOT /dev/sdb2
+
+We'll populate the first partition (boot) with the relevant files:
+
+# mount /dev/sdb1 /mnt
+# cp output/images/at91bootstrap.bin /mnt/BOOT.BIN
+# cp output/images/zImage /mnt
+# cp output/images/at91-ariag25.dtb /mnt
+# umount /mnt
+
+And the root filesystem afterwards:
+
+# mount /dev/sdb2 /mnt
+# tar -C /mnt output/images/rootfs.tar
+# umount /mnt
+
+You're done, insert the MicroSD card in the slot and enjoy.
+
diff --git a/configs/acmesystems_aria_g25_128mb_defconfig b/configs/acmesystems_aria_g25_128mb_defconfig
new file mode 100644
index 0000000..76ccbe1
--- /dev/null
+++ b/configs/acmesystems_aria_g25_128mb_defconfig
@@ -0,0 +1,24 @@
+# Architecture
+BR2_arm=y
+
+# Toolchain
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="4.1"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1"
+BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
+
+# Bootloader
+BR2_TARGET_AT91BOOTSTRAP3=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="3f957cec253abc80fd10c733e5e596f46e1aef56"
+BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE="board/acmesystems/aria-g25/at91bootstrap_aria_g25_128mb.config"
diff --git a/configs/acmesystems_aria_g25_256mb_defconfig b/configs/acmesystems_aria_g25_256mb_defconfig
new file mode 100644
index 0000000..320abc3
--- /dev/null
+++ b/configs/acmesystems_aria_g25_256mb_defconfig
@@ -0,0 +1,24 @@
+# Architecture
+BR2_arm=y
+
+# Toolchain
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="4.1"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1"
+BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
+
+# Bootloader
+BR2_TARGET_AT91BOOTSTRAP3=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="3f957cec253abc80fd10c733e5e596f46e1aef56"
+BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE="board/acmesystems/aria-g25/at91bootstrap_aria_g25_256mb.config"
-- 
2.3.6

^ permalink raw reply related	[flat|nested] 7+ messages in thread