* [Buildroot] [PATCH v2 2/4] xdriver_xf86-video-fbturbo: new package
2015-07-28 7:16 [Buildroot] [PATCH v2 1/4] freerdp: Add support for tz package Scott Fan
@ 2015-07-28 7:16 ` Scott Fan
2015-07-28 7:16 ` [Buildroot] [PATCH v2 3/4] cubieboard: update build support for cubieboard 1/2/3 Scott Fan
2015-07-28 7:16 ` [Buildroot] [PATCH v2 4/4] cubieboard: [PATCH] ipconfig: add nameserver IPs to kernel-parameter ip= Scott Fan
2 siblings, 0 replies; 8+ messages in thread
From: Scott Fan @ 2015-07-28 7:16 UTC (permalink / raw)
To: buildroot
Add the fbturbo video driver, which is based on xf86-video-fbdev (with
none of the original features stripped), primarily optimized for the
devices powered by the Allwinner SoC (A10, A13, A20).
https://github.com/ssvb/xf86-video-fbturbo/
Signed-off-by: Scott Fan <fancp2007@gmail.com>
---
package/x11r7/Config.in | 1 +
package/x11r7/xdriver_xf86-video-fbturbo/Config.in | 57 ++++++++++++++++++++++
.../xdriver_xf86-video-fbturbo.mk | 19 ++++++++
3 files changed, 77 insertions(+)
create mode 100644 package/x11r7/xdriver_xf86-video-fbturbo/Config.in
create mode 100644 package/x11r7/xdriver_xf86-video-fbturbo/xdriver_xf86-video-fbturbo.mk
diff --git a/package/x11r7/Config.in b/package/x11r7/Config.in
index 859e895..4e996fc 100644
--- a/package/x11r7/Config.in
+++ b/package/x11r7/Config.in
@@ -162,6 +162,7 @@ if BR2_PACKAGE_XORG7
source package/x11r7/xdriver_xf86-video-cirrus/Config.in
source package/x11r7/xdriver_xf86-video-dummy/Config.in
source package/x11r7/xdriver_xf86-video-fbdev/Config.in
+ source package/x11r7/xdriver_xf86-video-fbturbo/Config.in
source package/x11r7/xdriver_xf86-video-geode/Config.in
source package/x11r7/xdriver_xf86-video-glide/Config.in
source package/x11r7/xdriver_xf86-video-glint/Config.in
diff --git a/package/x11r7/xdriver_xf86-video-fbturbo/Config.in b/package/x11r7/xdriver_xf86-video-fbturbo/Config.in
new file mode 100644
index 0000000..748403f
--- /dev/null
+++ b/package/x11r7/xdriver_xf86-video-fbturbo/Config.in
@@ -0,0 +1,57 @@
+config BR2_PACKAGE_XDRIVER_XF86_VIDEO_FBTURBO
+ bool "xf86-video-fbturbo"
+ select BR2_PACKAGE_LIBDRI2
+ select BR2_PACKAGE_XPROTO_FONTSPROTO
+ select BR2_PACKAGE_XPROTO_RANDRPROTO
+ select BR2_PACKAGE_XPROTO_RENDERPROTO
+ select BR2_PACKAGE_XPROTO_VIDEOPROTO
+ select BR2_PACKAGE_XPROTO_XPROTO
+ select BR2_PACKAGE_XPROTO_XF86DRIPROTO
+ help
+ video driver, primarily optimized for the devices powered
+ by the Allwinner SoC (A10, A13, A20). It can use some of
+ the 2D/3D hardware acceleration features.
+
+ And because this driver is based on xf86-video-fbdev (with none of the
+ original features stripped), it actually supports all the same hardware
+ as xf86-video-fbdev. Essentially, xf86-video-fbturbo can be just used as
+ a drop-in replacement and run on practically any Linux system. There will
+ be no real difference on x86, but any ARM based system should see better
+ performance thanks to some additional optimizations (the elimination of
+ ShadowFB layer, ARM NEON/VFP code for dealing with uncached framebuffer
+ reads, automatic backing store management for faster window moves).
+
+ == 2D graphics acceleration features ==
+
+ Hardware accelerated window moving/scrolling on Allwinner A10/A20 (using the
+ G2D Mixer Processor).
+
+ Hardware accelerated window moving/scrolling on Raspberry Pi (using the BCM2835
+ DMA Controller)
+
+ == 3D graphics acceleration features ==
+
+ First a disclaimer to prevent any possible misunderstanding. The Xorg DDX
+ drivers (neither this one, nor the others) do not do any actual 3D acceleration
+ by themselves. They are nothing else but just a glue between the 3D drivers
+ and the X11 window system. Still a poorly implemented glue can easily become
+ the source of major performance problems. So it's important to do it right.
+
+ This DDX driver provides integration for Mali 400 GPU into Xorg. Any device
+ with Mali 400 should have a properly working OpenGL ES 2.0 acceleration if
+ it has Mali/UMP modules in the Linux kernel and libMali.so proprietary
+ binary blob installed in the system. Additionally, the hardware overlay
+ feature of Allwinner A10/A13/A20 display controller allows to support
+ zero-copy OpenGL ES buffer flipping without tearing. The rest of the
+ devices with Mali 400 hardware (Exynos4, Rockchip, ...) are expected to
+ have roughly the same 3D performance as when using the reference vendor
+ provided Xorg DDX driver xf86-video-mali.
+
+ == Video acceleration features ==
+
+ XV overlay is supported on Allwinner A10/A13/A20.
+
+ == Installation instructions ==
+
+ https://github.com/ssvb/xf86-video-fbturbo/wiki/Installation
+
diff --git a/package/x11r7/xdriver_xf86-video-fbturbo/xdriver_xf86-video-fbturbo.mk b/package/x11r7/xdriver_xf86-video-fbturbo/xdriver_xf86-video-fbturbo.mk
new file mode 100644
index 0000000..95a8e86
--- /dev/null
+++ b/package/x11r7/xdriver_xf86-video-fbturbo/xdriver_xf86-video-fbturbo.mk
@@ -0,0 +1,19 @@
+################################################################################
+#
+# xdriver_xf86-video-fbturbo
+#
+################################################################################
+
+XDRIVER_XF86_VIDEO_FBTURBO_VERSION = 0.4.0
+XDRIVER_XF86_VIDEO_FBTURBO_SITE = $(call github,ssvb,xf86-video-fbturbo,$(XDRIVER_XF86_VIDEO_FBTURBO_VERSION))
+XDRIVER_XF86_VIDEO_FBTURBO_LICENSE = MIT
+XDRIVER_XF86_VIDEO_FBTURBO_LICENSE_FILES = COPYING
+XDRIVER_XF86_VIDEO_FBTURBO_DEPENDENCIES = xserver_xorg-server xproto_fontsproto xproto_randrproto xproto_renderproto xproto_videoproto xproto_xproto xproto_xf86driproto libdri2
+
+define XDRIVER_XF86_VIDEO_FBTURBO_INSTALL_CONF_FILE
+ $(INSTALL) -m 0644 -D $(@D)/xorg.conf $(TARGET_DIR)/etc/X11/xorg.conf
+endef
+
+XDRIVER_XF86_VIDEO_FBTURBO_POST_INSTALL_TARGET_HOOKS += XDRIVER_XF86_VIDEO_FBTURBO_INSTALL_CONF_FILE
+
+$(eval $(autotools-package))
--
2.4.6
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH v2 3/4] cubieboard: update build support for cubieboard 1/2/3.
2015-07-28 7:16 [Buildroot] [PATCH v2 1/4] freerdp: Add support for tz package Scott Fan
2015-07-28 7:16 ` [Buildroot] [PATCH v2 2/4] xdriver_xf86-video-fbturbo: new package Scott Fan
@ 2015-07-28 7:16 ` Scott Fan
2015-07-28 7:50 ` Thomas Petazzoni
2015-09-20 13:58 ` Thomas Petazzoni
2015-07-28 7:16 ` [Buildroot] [PATCH v2 4/4] cubieboard: [PATCH] ipconfig: add nameserver IPs to kernel-parameter ip= Scott Fan
2 siblings, 2 replies; 8+ messages in thread
From: Scott Fan @ 2015-07-28 7:16 UTC (permalink / raw)
To: buildroot
This patch update the cb1/cb2's defconfig to mainline u-boot version,
and bump their linux-sunxi kernel to latest stage/sunxi-3.4 branch.
Additionally, add defconfig for cubieboard3 (a.k.a. cubietruck).
Finally, support set up the SD card only to boot from network.
Signed-off-by: Scott Fan <fancp2007@gmail.com>
---
board/cubietech/cubieboard/boot.cmd | 7 +-
board/cubietech/cubieboard/boot.env | 20 +
.../cubietech/cubieboard/linux-cubieboard2.config | 749 ---------------------
board/cubietech/cubieboard/mkcubiecard.sh | 125 ++--
board/cubietech/cubieboard/post-build.sh | 14 -
board/cubietech/cubieboard/post-image.sh | 26 +
board/cubietech/cubieboard/readme.txt | 31 +-
board/cubietech/cubieboard/sun4i-cubieboard.config | 4 +
.../cubietech/cubieboard/sun7i-cubieboard2.config | 4 +
board/cubietech/cubieboard/sun7i-cubietruck.config | 4 +
configs/cubieboard2_defconfig | 39 +-
configs/cubieboard_defconfig | 38 +-
configs/cubietruck_defconfig | 21 +
13 files changed, 205 insertions(+), 877 deletions(-)
create mode 100644 board/cubietech/cubieboard/boot.env
delete mode 100644 board/cubietech/cubieboard/linux-cubieboard2.config
delete mode 100755 board/cubietech/cubieboard/post-build.sh
create mode 100755 board/cubietech/cubieboard/post-image.sh
create mode 100644 board/cubietech/cubieboard/sun4i-cubieboard.config
create mode 100644 board/cubietech/cubieboard/sun7i-cubieboard2.config
create mode 100644 board/cubietech/cubieboard/sun7i-cubietruck.config
create mode 100644 configs/cubietruck_defconfig
diff --git a/board/cubietech/cubieboard/boot.cmd b/board/cubietech/cubieboard/boot.cmd
index 849ed00..519b0e7 100644
--- a/board/cubietech/cubieboard/boot.cmd
+++ b/board/cubietech/cubieboard/boot.cmd
@@ -1,4 +1,5 @@
+setenv bootm_boot_mode sec
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
-fatload mmc 0 0x43000000 script.bin
-fatload mmc 0 0x48000000 uImage
-bootm 0x48000000
+load mmc 0:1 0x43000000 script.bin || load mmc 0:1 0x43000000 boot/script.bin
+load mmc 0:1 0x42000000 uImage || load mmc 0:1 0x42000000 boot/uImage
+bootm 0x42000000
diff --git a/board/cubietech/cubieboard/boot.env b/board/cubietech/cubieboard/boot.env
new file mode 100644
index 0000000..8d8fbd4
--- /dev/null
+++ b/board/cubietech/cubieboard/boot.env
@@ -0,0 +1,20 @@
+autoload=no
+nfsroot=/tftpboot/rootfs
+
+stderr=serial,vga
+stdin=serial,usbkbd
+stdout=serial,vga
+
+scriptfile=script.bin
+scriptaddr=0x43000000
+
+kernelfile=uImage
+kernel_addr_r=0x42000000
+
+bootm_boot_mode=sec
+console=ttyS0,115200
+
+netargs=setenv bootargs console=${console} root=/dev/nfs nfsroot=${serverip}:${nfsroot} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off:${dnsip} ${extra}
+netboot=if test -s ${ipaddr}; then if test -s ${serverip}; then run netargs; tftp ${scriptaddr} ${serverip}:${scriptfile}; tftp ${kernel_addr_r} ${serverip}:${kernelfile}; bootm ${kernel_addr_r}; else echo WARN: Cannot find the environment variable serverip, please setenv, then saveenv and boot; fi; else run bootcmd; fi;
+
+bootcmd=dhcp; run netboot;
diff --git a/board/cubietech/cubieboard/linux-cubieboard2.config b/board/cubietech/cubieboard/linux-cubieboard2.config
deleted file mode 100644
index 1ae1519..0000000
--- a/board/cubietech/cubieboard/linux-cubieboard2.config
+++ /dev/null
@@ -1,749 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-CONFIG_CGROUP_MEM_RES_CTLR_KMEM=y
-CONFIG_CGROUP_PERF=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PERF_COUNTERS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_SGI_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-CONFIG_ARCH_SUN7I=y
-CONFIG_SUNXI_SCALING_MIN=408
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_NR_CPUS=2
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_COMPACTION=y
-CONFIG_KSM=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mmc0p1 rw init=/init loglevel=8"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_DEFAULT_GOV_FANTASY=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_USR_EVNT_NOTIFY=y
-CONFIG_CPU_FREQ_DVFS=y
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_FIB_TRIE_STATS=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_UDP_DIAG=m
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=y
-CONFIG_TCP_CONG_HTCP=y
-CONFIG_TCP_CONG_HSTCP=y
-CONFIG_TCP_CONG_HYBLA=y
-CONFIG_TCP_CONG_SCALABLE=y
-CONFIG_TCP_CONG_LP=y
-CONFIG_TCP_CONG_VENO=y
-CONFIG_TCP_CONG_YEAH=y
-CONFIG_TCP_CONG_ILLINOIS=y
-CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_SIT_6RD=y
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_IPV6_MROUTE=y
-CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IPV6_PIMSM_V2=y
-# CONFIG_ANDROID_PARANOID_NETWORK is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETWORK_PHY_TIMESTAMPING=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_TIMEOUT=y
-CONFIG_NF_CONNTRACK_TIMESTAMP=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_SNMP=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NF_CT_NETLINK_TIMEOUT=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XT_SET=m
-CONFIG_NETFILTER_XT_TARGET_AUDIT=m
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_LOG=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_IPVS=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_NFACCT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA2=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_SET=m
-CONFIG_IP_SET_BITMAP_IP=m
-CONFIG_IP_SET_BITMAP_IPMAC=m
-CONFIG_IP_SET_BITMAP_PORT=m
-CONFIG_IP_SET_HASH_IP=m
-CONFIG_IP_SET_HASH_IPPORT=m
-CONFIG_IP_SET_HASH_IPPORTIP=m
-CONFIG_IP_SET_HASH_IPPORTNET=m
-CONFIG_IP_SET_HASH_NET=m
-CONFIG_IP_SET_HASH_NETPORT=m
-CONFIG_IP_SET_HASH_NETIFACE=m
-CONFIG_IP_SET_LIST_SET=m
-CONFIG_IP_VS=m
-CONFIG_IP_VS_IPV6=y
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_VS_PE_SIP=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_RPFILTER=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_REJECT_SKERR=y
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RPFILTER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_L2TP=m
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=m
-CONFIG_L2TP_ETH=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_BATMAN_ADV=m
-CONFIG_OPENVSWITCH=m
-CONFIG_NETPRIO_CGROUP=m
-CONFIG_NET_PKTGEN=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRTTY_SIR=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_MCS_FIR=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_BT_ATH3K=m
-CONFIG_AF_RXRPC=m
-CONFIG_RXKAD=m
-CONFIG_CFG80211=y
-CONFIG_CFG80211_DEVELOPER_WARNINGS=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_CFG80211_ALLOW_RECONNECT=y
-CONFIG_MAC80211=m
-CONFIG_MAC80211_MESH=y
-CONFIG_WIMAX=m
-CONFIG_RFKILL=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_SUNXI_DBGREG=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SW_SATA_AHCI_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_SUNXI_EMAC=y
-CONFIG_PHYLIB=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPPOLAC=m
-CONFIG_PPPOPNS=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_USB_IPHETH=m
-CONFIG_ATH_COMMON=m
-CONFIG_ATH9K=m
-CONFIG_RTL8192CU=m
-CONFIG_RTL8192CU_SW=m
-CONFIG_RTL8188EU=m
-CONFIG_RTXX7X_SW=m
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_KEYRESET=y
-CONFIG_KEYBOARD_HV2605_KEYBOARD=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_GT801=m
-CONFIG_TOUCHSCREEN_GT811=m
-CONFIG_TOUCHSCREEN_GT818=m
-CONFIG_TOUCHSCREEN_FT5X_TS=m
-CONFIG_TOUCHSCREEN_ZT8031=m
-CONFIG_GSENSOR=y
-CONFIG_SENSORS_BMA250=m
-CONFIG_MEMSIC_ECOMPASS=m
-CONFIG_SENSORS_MXC622X=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_SUNXI=m
-CONFIG_POWER_SUPPLY=y
-CONFIG_AW_AXP=y
-# CONFIG_HWMON is not set
-CONFIG_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_MEDIA_TUNER_MAX2165 is not set
-# CONFIG_MEDIA_TUNER_TDA18218 is not set
-# CONFIG_MEDIA_TUNER_TDA18212 is not set
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_JL2005BCD=m
-CONFIG_USB_GSPCA_KINECT=m
-CONFIG_USB_GSPCA_KONICA=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_NW80X=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SE401=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SPCA1528=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_SQ930X=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TOPRO=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_VICAM=m
-CONFIG_USB_GSPCA_XIRLINK_CIT=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_ALSA=m
-CONFIG_VIDEO_TM6000=m
-CONFIG_VIDEO_TM6000_ALSA=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_USB_ET61X251=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_PWC=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_IMX074=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T031=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_SOC_CAMERA_OV2640=m
-CONFIG_SOC_CAMERA_OV5642=m
-CONFIG_SOC_CAMERA_OV6650=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_SOC_CAMERA_OV9740=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-# CONFIG_VIDEO_CSI_SUN4I is not set
-CONFIG_RADIO_SI470X=y
-CONFIG_USB_SI470X=m
-CONFIG_I2C_SI470X=m
-CONFIG_USB_MR800=m
-CONFIG_USB_DSBR=m
-CONFIG_RADIO_SI4713=m
-CONFIG_USB_KEENE=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_RADIO_SAA7706H=m
-CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_WL1273=m
-CONFIG_AUDIO_ENGINE=y
-CONFIG_PA_CONTROL=y
-CONFIG_DRM=m
-CONFIG_DRM_MALI=m
-CONFIG_DRM_UDL=m
-CONFIG_MALI=m
-CONFIG_MALI400_DEBUG=y
-CONFIG_MALI400_GPU_UTILIZATION=y
-CONFIG_FB=y
-CONFIG_FB_SUNXI=y
-CONFIG_FB_SUNXI_LCD=y
-CONFIG_FB_SUNXI_HDMI=y
-CONFIG_HDMI_CEC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_ALOOP=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_SOC=y
-CONFIG_SND_SUNXI_SOC_SPDIF=y
-CONFIG_HIDRAW=y
-CONFIG_UHID=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_HID_KYE=y
-CONFIG_HID_LOGITECH_DJ=y
-CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIWHEELS_FF is not set
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_REALTEK=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_ONETOUCH=y
-CONFIG_USB_STORAGE_KARMA=y
-CONFIG_USB_STORAGE_CYPRESS_ATACB=y
-CONFIG_USB_STORAGE_ENE_UB6250=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_FILE_STORAGE_TEST=y
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_USHC=y
-CONFIG_MMC_SUNXI_POWER_CONTROL=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_SUNXI=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SUN4I=y
-CONFIG_STAGING=y
-CONFIG_ANDROID=y
-CONFIG_ANDROID_BINDER_IPC=y
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_RAM_CONSOLE=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_REISERFS_FS=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=y
-CONFIG_FSCACHE=y
-CONFIG_FSCACHE_STATS=y
-CONFIG_CACHEFILES=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_HFS_FS=y
-CONFIG_HFSPLUS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="y"
-CONFIG_ROOT_NFS=y
-CONFIG_NFS_USE_LEGACY_DNS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_FAULT_INJECTION=y
-CONFIG_CIFS=y
-CONFIG_CIFS_DFS_UPCALL=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_SECTION_MISMATCH=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LIST=y
-CONFIG_BOOT_PRINTK_DELAY=y
-CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
-# CONFIG_FTRACE is not set
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_DEBUG_LL=y
-CONFIG_SECURITYFS=y
-# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ZLIB=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=y
diff --git a/board/cubietech/cubieboard/mkcubiecard.sh b/board/cubietech/cubieboard/mkcubiecard.sh
index f1d5a9f..a5bd8ec 100755
--- a/board/cubietech/cubieboard/mkcubiecard.sh
+++ b/board/cubietech/cubieboard/mkcubiecard.sh
@@ -1,4 +1,9 @@
-#! /bin/sh
+#!/bin/sh
+### BEGIN INTRO
+# mkcubiecard.sh v0.2:
+# 2015, Scott Fan <fancp2007@gmail.com>
+# rewrite this script more clear;
+# add the 'netboot' argument, to make a network-bootable card.
# mkCubieCard.sh v0.1:
# 2013, Carlo Caione <carlo.caione@gmail.com>
# heavely based on :
@@ -9,13 +14,21 @@
# (c) Copyright 2009 Graeme Gregory <dp@xora.org.uk>
# Licensed under terms of GPLv2
#
+# Bootable SD card
+# http://linux-sunxi.org/Bootable_SD_card
+#
# Parts of the procudure base on the work of Denys Dmytriyenko
# http://wiki.omap.com/index.php/MMC_Boot_Format
+### END INTRO
IMAGES_DIR=$1
+DRIVE=$2
+NETBOOT=$3
+
SPL_IMG=$IMAGES_DIR/sunxi-spl.bin
SPL_UBOOT=$IMAGES_DIR/u-boot-sunxi-with-spl.bin
UBOOT_IMG=$IMAGES_DIR/u-boot.bin
+UBOOT_ENV=$IMAGES_DIR/u-boot-env.bin
UIMAGE=$IMAGES_DIR/uImage
BIN_BOARD_FILE=$IMAGES_DIR/script.bin
ROOTFS=$IMAGES_DIR/rootfs.tar
@@ -23,8 +36,8 @@ BOOT_CMD_H=$IMAGES_DIR/boot.scr
export LC_ALL=C
-if [ $# -ne 2 ]; then
- echo "Usage: $0 <images_dir> <drive>"
+if [ $# -lt 2 ]; then
+ echo "Usage: $0 <images_dir> <drive> [netboot: yes|no]"
exit 1;
fi
@@ -35,6 +48,7 @@ fi
if [ ! -f $SPL_IMG -a ! -f $SPL_UBOOT ] ||
[ ! -f $UBOOT_IMG ] ||
+ [ ! -f $UBOOT_ENV ] ||
[ ! -f $UIMAGE ] ||
[ ! -f $BIN_BOARD_FILE ] ||
[ ! -f $ROOTFS ] ||
@@ -43,57 +57,81 @@ if [ ! -f $SPL_IMG -a ! -f $SPL_UBOOT ] ||
exit 1
fi
-DRIVE=$2
-P1=`mktemp -d`
-P2=`mktemp -d`
-dd if=/dev/zero of=$DRIVE bs=1M count=3
+####################
+# Preparing
+####################
+echo `fdisk -l $DRIVE | grep Disk | grep bytes`
-SIZE=`fdisk -l $DRIVE | grep Disk | grep bytes | awk '{print $5}'`
+# erase the first part of your card except the partition table
+echo "\n>>>> Erasing the first part of $DRIVE ..."
+dd if=/dev/zero of=$DRIVE bs=1024 count=1023 seek=1
-echo DISK SIZE - $SIZE bytes
+####################
+# Bootloader
+####################
+if [ -e $SPL_UBOOT ]; then
+ echo "\n>>>> Writing $SPL_UBOOT ..."
+ dd if=$SPL_UBOOT of=$DRIVE bs=1024 seek=8
+else
+ # write SPL
+ echo "\n>>>> Writing $SPL_IMG ..."
+ dd if=$SPL_IMG of=$DRIVE bs=1024 seek=8
+ # write u-boot
+ echo "\n>>>> Writing $UBOOT_IMG ..."
+ dd if=$UBOOT_IMG of=$DRIVE bs=1024 seek=32
+fi
+if [ "xyes" = "x$NETBOOT" ]; then
+ # write environment for netboot
+ echo "\n>>>> Writing $UBOOT_ENV ..."
+ dd if=$UBOOT_ENV of=$DRIVE bs=1024 seek=544
+ exit 0
+fi
-# ~2048, 16MB, FAT, bootable
-# ~rest of drive, Ext4
-{
-echo 32,512,0x0C,*
-echo 544,,,-
-} | sfdisk -D $DRIVE
+####################
+# Partitioning
+####################
+# a 16MB boot partition starting at 1MB,
+# and the rest as rootfs partition
+echo "\n>>>> Partitioning ..."
+sfdisk -R $DRIVE
+cat <<EOT | sfdisk --in-order -L -uM $DRIVE
+1,16,c
+,,L
+EOT
sleep 1
-if [ -b ${DRIVE}1 ]; then
- D1=${DRIVE}1
- umount ${DRIVE}1
- mkfs.vfat -n "boot" ${DRIVE}1
+# format the first partition
+[ -b ${DRIVE}1 ] && D1=${DRIVE}1
+[ -b ${DRIVE}p1 ] && D1=${DRIVE}p1
+
+if [ -n $D1 ]; then
+ echo "\n>>>> Formatting boot partition $D1 ..."
+ mkfs.vfat -v -n "BOOT" $D1
else
- if [ -b ${DRIVE}p1 ]; then
- D1=${DRIVE}p1
- umount ${DRIVE}p1
- mkfs.vfat -n "boot" ${DRIVE}p1
- else
- echo "Cant find boot partition in /dev"
- exit 1
- fi
+ echo "Cannot find boot partition in /dev"
+ exit 1
fi
+# format the second partition
+[ -b ${DRIVE}2 ] && D2=${DRIVE}2
+[ -b ${DRIVE}p2 ] && D2=${DRIVE}p2
-if [ -b ${DRIVE}2 ]; then
- D2=${DRIVE}2
- umount ${DRIVE}2
- mkfs.ext4 -L "Cubie" ${DRIVE}2
+if [ -n $D2 ]; then
+ echo "\n>>>> Formatting rootfs partition $D2 ..."
+ mkfs.ext4 -v -L "Cubie" $D2
else
- if [ -b ${DRIVE}p2 ]; then
- D2=${DRIVE}p2
- umount ${DRIVE}p2
- mkfs.ext4 -L "Cubie" ${DRIVE}p2
- else
- echo "Cant find rootfs partition in /dev"
- exit 1
- fi
+ echo "Cannot find rootfs partition in /dev"
+ exit 1
fi
+echo ">>>> Writing boot files and rootfs files ..."
+
+P1=`mktemp -d`
+P2=`mktemp -d`
+
mount $D1 $P1
mount $D2 $P2
@@ -114,11 +152,4 @@ umount $D2
rm -fr $P1
rm -fr $P2
-if [ -e $SPL_UBOOT ]; then
- dd if=$SPL_UBOOT of=$DRIVE bs=1024 seek=8
-else
- # write SPL
- dd if=$SPL_IMG of=$DRIVE bs=1024 seek=8
- # write mele u-boot
- dd if=$UBOOT_IMG of=$DRIVE bs=1024 seek=32
-fi
+echo "All completed."
diff --git a/board/cubietech/cubieboard/post-build.sh b/board/cubietech/cubieboard/post-build.sh
deleted file mode 100755
index 1b0258c..0000000
--- a/board/cubietech/cubieboard/post-build.sh
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/sh
-# post-build.sh for CubieBoard
-# 2013, Carlo Caione <carlo.caione@gmail.com>
-
-BOARD_DIR="$(dirname $0)"
-MKIMAGE=$HOST_DIR/usr/bin/mkimage
-BOOT_CMD=$BOARD_DIR/boot.cmd
-BOOT_CMD_H=$BINARIES_DIR/boot.scr
-
-# U-Boot script
-if [ -e $MKIMAGE -a -e $BOOT_CMD ];
-then
- $MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H
-fi
diff --git a/board/cubietech/cubieboard/post-image.sh b/board/cubietech/cubieboard/post-image.sh
new file mode 100755
index 0000000..4d792a4
--- /dev/null
+++ b/board/cubietech/cubieboard/post-image.sh
@@ -0,0 +1,26 @@
+#!/bin/sh
+# post-image.sh for CubieBoard
+# 2015, Scott Fan <fancp2007@gmail.com>
+# 2013, Carlo Caione <carlo.caione@gmail.com>
+
+BOARD_DIR="$(dirname $0)"
+MKIMAGE=$HOST_DIR/usr/bin/mkimage
+BOOT_CMD=$BOARD_DIR/boot.cmd
+BOOT_CMD_H=$BINARIES_DIR/boot.scr
+
+MKENVIMAGE=$HOST_DIR/usr/bin/mkenvimage
+BOOT_ENV_SIZE=0x20000
+BOOT_ENV_SRC=$BOARD_DIR/boot.env
+BOOT_ENV_BIN=$BINARIES_DIR/u-boot-env.bin
+
+# U-Boot script
+if [ -e $MKIMAGE -a -e $BOOT_CMD ];
+then
+ $MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H
+fi
+
+# U-Boot environment
+if [ -e $MKENVIMAGE -a -e $BOOT_ENV_SRC ];
+then
+ $MKENVIMAGE -s $BOOT_ENV_SIZE -o $BOOT_ENV_BIN $BOOT_ENV_SRC
+fi
diff --git a/board/cubietech/cubieboard/readme.txt b/board/cubietech/cubieboard/readme.txt
index 81cc5e4..af3e997 100644
--- a/board/cubietech/cubieboard/readme.txt
+++ b/board/cubietech/cubieboard/readme.txt
@@ -1,4 +1,4 @@
-cubieboard and cubieboard2
+cubieboard, cubieboard2 and cubietruck
-----
Intro
@@ -13,11 +13,16 @@ For more information, please see http://linux-sunxi.org/FirstSteps
How to build it
---------------
-You need to use the cubieboard_defconfig or cubieboard2_defconfig, to do so:
+You need to use the cubie*_defconfig, to do so:
+cubieboard1 (a.k.a. cubieboard):
* make cubieboard_defconfig
-or
+
+cubieboard2:
* make cubieboard2_defconfig
+cubieboard3 (a.k.a. cubietruck):
+ * make cubietruck_defconfig
+
And to compile:
* make
@@ -31,10 +36,10 @@ After building, you should obtain this tree:
+-- rootfs.tar
+-- boot.scr
+-- script.bin
- +-- sunxi-spl.bin
+-- u-boot.bin
- +-- u-boot-sunxi-with-spl.bin (optional)
- `-- uImage
+ +-- u-boot-env.bin
+ +-- u-boot-sunxi-with-spl.bin
+ +-- uImage
--------------------------
How setting up the SD card
@@ -54,9 +59,21 @@ Use dmesg to find out where the SD card is attached in the /dev tree
where:
- <images_dir> is the directory containing the generated files (usually
output/images)
- - <device> is the device file of the SD card (usually /dev/sdX)
+ - <device> is the device file of the SD card (usually /dev/mmcblk0 or /dev/sdX)
+
+Alternately, you may set up the SD card only to boot from the network:
+
+# sudo ./mkcubiecard.sh <images_dir> <device> [netboot]
+
+where:
+ - <images_dir> and <device> as above
+ - [netboot] specify whether to boot from network (should yes, if you want)
+ATTENTION: This operation will keep the partition table of your SD card, will not
+ write any data to the existing partitions. However, if the first
+ partition ahead of the 1MB offset, it will be damaged.
--
+Scott Fan <fancp2007@gmail.com>
Carlo Caione <carlo.caione@gmail.com>
diff --git a/board/cubietech/cubieboard/sun4i-cubieboard.config b/board/cubietech/cubieboard/sun4i-cubieboard.config
new file mode 100644
index 0000000..43eee73
--- /dev/null
+++ b/board/cubietech/cubieboard/sun4i-cubieboard.config
@@ -0,0 +1,4 @@
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNXI_EMAC=y
diff --git a/board/cubietech/cubieboard/sun7i-cubieboard2.config b/board/cubietech/cubieboard/sun7i-cubieboard2.config
new file mode 100644
index 0000000..43eee73
--- /dev/null
+++ b/board/cubietech/cubieboard/sun7i-cubieboard2.config
@@ -0,0 +1,4 @@
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNXI_EMAC=y
diff --git a/board/cubietech/cubieboard/sun7i-cubietruck.config b/board/cubietech/cubieboard/sun7i-cubietruck.config
new file mode 100644
index 0000000..ff7813f
--- /dev/null
+++ b/board/cubietech/cubieboard/sun7i-cubietruck.config
@@ -0,0 +1,4 @@
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNXI_GMAC=y
diff --git a/configs/cubieboard2_defconfig b/configs/cubieboard2_defconfig
index f85760d..41d5266 100644
--- a/configs/cubieboard2_defconfig
+++ b/configs/cubieboard2_defconfig
@@ -1,40 +1,21 @@
-# Architecture
BR2_arm=y
BR2_cortex_a7=y
-
-# System configuration
+BR2_KERNEL_HEADERS_3_4=y
BR2_TARGET_GENERIC_HOSTNAME="Cubieboard2"
BR2_TARGET_GENERIC_ISSUE="Welcome to use Cubieboard!"
-BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard/post-build.sh"
-
-# Additional tools
-BR2_PACKAGE_HOST_SUNXI_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_SUNXI_TOOLS=y
-BR2_PACKAGE_SUNXI_BOARDS=y
-BR2_PACKAGE_SUNXI_BOARDS_FEX_FILE="a20/cubieboard2.fex"
-
-# Kernel headers
-BR2_KERNEL_HEADERS_3_4=y
-
-# Kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard/post-image.sh"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="5dda5145c877335e17bd9ca48954841acc0f785a"
-BR2_LINUX_KERNEL_VERSION="sunxi-3.4"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/cubietech/cubieboard/linux-cubieboard2.config"
-
-# Bootloaders
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d47d367036be38c5180632ec8a3ad169a4593a88"
+BR2_LINUX_KERNEL_DEFCONFIG="sun7i"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/cubietech/cubieboard/sun7i-cubieboard2.config"
+BR2_PACKAGE_SUNXI_TOOLS=y
+BR2_PACKAGE_SUNXI_BOARDS=y
+BR2_PACKAGE_SUNXI_BOARDS_FEX_FILE="a20/cubieboard2.fex"
BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="cubieboard2"
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_VERSION="sunxi"
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux-sunxi/u-boot-sunxi.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="b4bca5e0651b460a4511582f07a935cb48f74948"
-BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_UBOOT_BOARDNAME="Cubieboard2"
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
diff --git a/configs/cubieboard_defconfig b/configs/cubieboard_defconfig
index 1da019f..85dc794 100644
--- a/configs/cubieboard_defconfig
+++ b/configs/cubieboard_defconfig
@@ -1,39 +1,21 @@
-# Architecture
BR2_arm=y
BR2_cortex_a8=y
-
-# System configuration
+BR2_KERNEL_HEADERS_3_4=y
BR2_TARGET_GENERIC_HOSTNAME="Cubieboard"
BR2_TARGET_GENERIC_ISSUE="Welcome to use Cubieboard!"
-BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard/post-build.sh"
-
-# Additional tools
-BR2_PACKAGE_HOST_SUNXI_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_SUNXI_TOOLS=y
-BR2_PACKAGE_SUNXI_BOARDS=y
-BR2_PACKAGE_SUNXI_BOARDS_FEX_FILE="a10/cubieboard.fex"
-
-# Kernel headers
-BR2_KERNEL_HEADERS_3_4=y
-
-# Kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard/post-image.sh"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="274a66a7bfcbaabb88d63e4eba161965383cc416"
-BR2_LINUX_KERNEL_VERSION="sunxi-3.4"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d47d367036be38c5180632ec8a3ad169a4593a88"
BR2_LINUX_KERNEL_DEFCONFIG="sun4i"
-
-# Bootloaders
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/cubietech/cubieboard/sun4i-cubieboard.config"
+BR2_PACKAGE_SUNXI_TOOLS=y
+BR2_PACKAGE_SUNXI_BOARDS=y
+BR2_PACKAGE_SUNXI_BOARDS_FEX_FILE="a10/cubieboard.fex"
BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="cubieboard"
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_VERSION="sunxi"
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux-sunxi/u-boot-sunxi.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="1a8ac55429f7f8cc9f100c1cf2dc0195cf81e76f"
-BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_UBOOT_BOARDNAME="Cubieboard"
BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
diff --git a/configs/cubietruck_defconfig b/configs/cubietruck_defconfig
new file mode 100644
index 0000000..01a5fc2
--- /dev/null
+++ b/configs/cubietruck_defconfig
@@ -0,0 +1,21 @@
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_KERNEL_HEADERS_3_4=y
+BR2_TARGET_GENERIC_HOSTNAME="Cubietruck"
+BR2_TARGET_GENERIC_ISSUE="Welcome to use Cubieboard!"
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d47d367036be38c5180632ec8a3ad169a4593a88"
+BR2_LINUX_KERNEL_DEFCONFIG="sun7i"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/cubietech/cubieboard/sun7i-cubietruck.config"
+BR2_PACKAGE_SUNXI_TOOLS=y
+BR2_PACKAGE_SUNXI_BOARDS=y
+BR2_PACKAGE_SUNXI_BOARDS_FEX_FILE="a20/cubietruck.fex"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="Cubietruck"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
--
2.4.6
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Buildroot] [PATCH v2 4/4] cubieboard: [PATCH] ipconfig: add nameserver IPs to kernel-parameter ip=
2015-07-28 7:16 [Buildroot] [PATCH v2 1/4] freerdp: Add support for tz package Scott Fan
2015-07-28 7:16 ` [Buildroot] [PATCH v2 2/4] xdriver_xf86-video-fbturbo: new package Scott Fan
2015-07-28 7:16 ` [Buildroot] [PATCH v2 3/4] cubieboard: update build support for cubieboard 1/2/3 Scott Fan
@ 2015-07-28 7:16 ` Scott Fan
2015-08-29 21:29 ` Thomas Petazzoni
2 siblings, 1 reply; 8+ messages in thread
From: Scott Fan @ 2015-07-28 7:16 UTC (permalink / raw)
To: buildroot
Signed-off-by: Scott Fan <fancp2007@gmail.com>
---
.../5e953778a2aab04929a5e7b69f53dc26e39b079e.patch | 133 +++++++++++++++++++++
configs/cubieboard2_defconfig | 1 +
configs/cubieboard_defconfig | 1 +
configs/cubietruck_defconfig | 1 +
4 files changed, 136 insertions(+)
create mode 100644 board/cubietech/cubieboard/5e953778a2aab04929a5e7b69f53dc26e39b079e.patch
diff --git a/board/cubietech/cubieboard/5e953778a2aab04929a5e7b69f53dc26e39b079e.patch b/board/cubietech/cubieboard/5e953778a2aab04929a5e7b69f53dc26e39b079e.patch
new file mode 100644
index 0000000..e473040
--- /dev/null
+++ b/board/cubietech/cubieboard/5e953778a2aab04929a5e7b69f53dc26e39b079e.patch
@@ -0,0 +1,133 @@
+From 5e953778a2aab04929a5e7b69f53dc26e39b079e Mon Sep 17 00:00:00 2001
+From: Christoph Fritz <chf.fritz@googlemail.com>
+Date: Fri, 21 Sep 2012 08:31:19 +0000
+Subject: [PATCH] ipconfig: add nameserver IPs to kernel-parameter ip=
+
+On small systems (e.g. embedded ones) IP addresses are often configured
+by bootloaders and get assigned to kernel via parameter "ip=". If set to
+"ip=dhcp", even nameserver entries from DHCP daemons are handled. These
+entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf.
+
+To configure nameservers for networks without DHCP, this patch adds option
+<dns0-ip> and <dns1-ip> to kernel-parameter 'ip='.
+
+Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
+Tested-by: Jan Weitzel <j.weitzel@phytec.de>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ Documentation/filesystems/nfs/nfsroot.txt | 10 +++++++-
+ net/ipv4/ipconfig.c | 39 ++++++++++++++++++++++++++++---
+ 2 files changed, 45 insertions(+), 4 deletions(-)
+
+diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt
+index ffdd9d8..2d66ed6 100644
+--- a/Documentation/filesystems/nfs/nfsroot.txt
++++ b/Documentation/filesystems/nfs/nfsroot.txt
+@@ -78,7 +78,8 @@ nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
+ flags = hard, nointr, noposix, cto, ac
+
+
+-ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
++ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>:
++ <dns0-ip>:<dns1-ip>
+
+ This parameter tells the kernel how to configure IP addresses of devices
+ and also how to set up the IP routing table. It was originally called
+@@ -158,6 +159,13 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
+
+ Default: any
+
++ <dns0-ip> IP address of first nameserver.
++ Value gets exported by /proc/net/pnp which is often linked
++ on embedded systems by /etc/resolv.conf.
++
++ <dns1-ip> IP address of secound nameserver.
++ Same as above.
++
+
+ nfsrootdebug
+
+diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
+index 67e8a6b..1c0e7e0 100644
+--- a/net/ipv4/ipconfig.c
++++ b/net/ipv4/ipconfig.c
+@@ -743,14 +743,22 @@ static void __init ic_bootp_init_ext(u8 *e)
+
+
+ /*
+- * Initialize the DHCP/BOOTP mechanism.
++ * Predefine Nameservers
+ */
+-static inline void __init ic_bootp_init(void)
++static inline void __init ic_nameservers_predef(void)
+ {
+ int i;
+
+ for (i = 0; i < CONF_NAMESERVERS_MAX; i++)
+ ic_nameservers[i] = NONE;
++}
++
++/*
++ * Initialize the DHCP/BOOTP mechanism.
++ */
++static inline void __init ic_bootp_init(void)
++{
++ ic_nameservers_predef();
+
+ dev_add_pack(&bootp_packet_type);
+ }
+@@ -1379,6 +1387,7 @@ static int __init ip_auto_config(void)
+ int retries = CONF_OPEN_RETRIES;
+ #endif
+ int err;
++ unsigned int i;
+
+ #ifdef CONFIG_PROC_FS
+ proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops);
+@@ -1499,7 +1508,15 @@ static int __init ip_auto_config(void)
+ &ic_servaddr, &root_server_addr, root_server_path);
+ if (ic_dev_mtu)
+ pr_cont(", mtu=%d", ic_dev_mtu);
+- pr_cont("\n");
++ for (i = 0; i < CONF_NAMESERVERS_MAX; i++)
++ if (ic_nameservers[i] != NONE) {
++ pr_info(" nameserver%u=%pI4",
++ i, &ic_nameservers[i]);
++ break;
++ }
++ for (i++; i < CONF_NAMESERVERS_MAX; i++)
++ if (ic_nameservers[i] != NONE)
++ pr_cont(", nameserver%u=%pI4\n", i, &ic_nameservers[i]);
+ #endif /* !SILENT */
+
+ return 0;
+@@ -1570,6 +1587,8 @@ static int __init ip_auto_config_setup(char *addrs)
+ return 1;
+ }
+
++ ic_nameservers_predef();
++
+ /* Parse string for static IP assignment. */
+ ip = addrs;
+ while (ip && *ip) {
+@@ -1613,6 +1632,20 @@ static int __init ip_auto_config_setup(char *addrs)
+ ic_enable = 0;
+ }
+ break;
++ case 7:
++ if (CONF_NAMESERVERS_MAX >= 1) {
++ ic_nameservers[0] = in_aton(ip);
++ if (ic_nameservers[0] == ANY)
++ ic_nameservers[0] = NONE;
++ }
++ break;
++ case 8:
++ if (CONF_NAMESERVERS_MAX >= 2) {
++ ic_nameservers[1] = in_aton(ip);
++ if (ic_nameservers[1] == ANY)
++ ic_nameservers[1] = NONE;
++ }
++ break;
+ }
+ }
+ ip = cp;
diff --git a/configs/cubieboard2_defconfig b/configs/cubieboard2_defconfig
index 41d5266..a2b2aef 100644
--- a/configs/cubieboard2_defconfig
+++ b/configs/cubieboard2_defconfig
@@ -9,6 +9,7 @@ BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d47d367036be38c5180632ec8a3ad169a4593a88"
+BR2_LINUX_KERNEL_PATCH="board/cubietech/cubieboard/5e953778a2aab04929a5e7b69f53dc26e39b079e.patch"
BR2_LINUX_KERNEL_DEFCONFIG="sun7i"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/cubietech/cubieboard/sun7i-cubieboard2.config"
BR2_PACKAGE_SUNXI_TOOLS=y
diff --git a/configs/cubieboard_defconfig b/configs/cubieboard_defconfig
index 85dc794..566f633 100644
--- a/configs/cubieboard_defconfig
+++ b/configs/cubieboard_defconfig
@@ -9,6 +9,7 @@ BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d47d367036be38c5180632ec8a3ad169a4593a88"
+BR2_LINUX_KERNEL_PATCH="board/cubietech/cubieboard/5e953778a2aab04929a5e7b69f53dc26e39b079e.patch"
BR2_LINUX_KERNEL_DEFCONFIG="sun4i"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/cubietech/cubieboard/sun4i-cubieboard.config"
BR2_PACKAGE_SUNXI_TOOLS=y
diff --git a/configs/cubietruck_defconfig b/configs/cubietruck_defconfig
index 01a5fc2..419b64f 100644
--- a/configs/cubietruck_defconfig
+++ b/configs/cubietruck_defconfig
@@ -9,6 +9,7 @@ BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d47d367036be38c5180632ec8a3ad169a4593a88"
+BR2_LINUX_KERNEL_PATCH="board/cubietech/cubieboard/5e953778a2aab04929a5e7b69f53dc26e39b079e.patch"
BR2_LINUX_KERNEL_DEFCONFIG="sun7i"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/cubietech/cubieboard/sun7i-cubietruck.config"
BR2_PACKAGE_SUNXI_TOOLS=y
--
2.4.6
^ permalink raw reply related [flat|nested] 8+ messages in thread