From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [RFC 3/6] system: add mdev-only /dev management (without devtmpfs)
Date: Mon, 14 Sep 2015 21:34:04 +0200 [thread overview]
Message-ID: <20150914213404.4fdd36a5@free-electrons.com> (raw)
In-Reply-To: <55F6F060.2060901@lucaceresoli.net>
Dear Luca Ceresoli,
On Mon, 14 Sep 2015 18:05:52 +0200, Luca Ceresoli wrote:
> But now I removed that patch, and replaced with a different
> implementation based on Arnout's suggestion of using BUSYBOX_DEVICES.
I am not sure using BUSYBOX_DEVICES is fully correct. The reason
why /dev/console is needed is *not* because of Busybox, but because of
the kernel that is opening /dev/console before handing control over
to the init application:
http://lxr.free-electrons.com/source/init/main.c#L1011
If you do BUSYBOX_DEVICES with just /dev/console, then you will also
need a SYSVINIT_DEVICES with just /dev/console.
Though I admit my comment here is mainly nitpicking :)
> > One thing I dislike a bit is that there is quite a bit overlap between
> > S10mdev and activate-mdev. As Arnout suggested, can you just mount a
> > tmpfs in /dev in the inittab in the "mdev without devtmpfs" case, and
> > then keep the normal S10mdev script?
>
> v2 will do things this way.
Great!
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2015-09-14 19:34 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-08 21:28 [Buildroot] [RFC 0/6] mdev-only /dev management (without devtmpfs) Luca Ceresoli
2015-09-08 21:28 ` [Buildroot] [RFC 1/6] Move mounting /sys from fstab to inittab Luca Ceresoli
2015-09-09 9:12 ` Arnout Vandecappelle
2015-09-08 21:28 ` [Buildroot] [RFC 2/6] system: clarify /dev management using devtmpfs + {mdev, eudev} Luca Ceresoli
2015-09-09 9:40 ` Arnout Vandecappelle
2015-09-09 10:53 ` Luca Ceresoli
2015-09-09 10:54 ` Arnout Vandecappelle
2015-09-08 21:28 ` [Buildroot] [RFC 3/6] system: add mdev-only /dev management (without devtmpfs) Luca Ceresoli
2015-09-09 9:21 ` Arnout Vandecappelle
2015-09-09 12:29 ` Luca Ceresoli
2015-09-09 12:32 ` Arnout Vandecappelle
2015-09-09 13:54 ` Thomas Petazzoni
2015-09-14 13:47 ` Luca Ceresoli
2015-09-14 22:23 ` Arnout Vandecappelle
2015-09-15 22:35 ` Luca Ceresoli
2015-09-14 20:53 ` Peter Korsgaard
2015-09-14 21:34 ` Thomas Petazzoni
2015-09-14 21:38 ` Peter Korsgaard
2015-09-15 7:30 ` Thomas Petazzoni
2015-09-15 8:09 ` Peter Korsgaard
2015-09-15 9:41 ` Thomas Petazzoni
2015-09-15 12:01 ` Peter Korsgaard
2015-09-15 12:27 ` Arnout Vandecappelle
2015-09-15 12:32 ` Peter Korsgaard
2015-09-18 16:37 ` Luca Ceresoli
2015-09-15 13:03 ` Thomas Petazzoni
2015-09-15 13:14 ` Peter Korsgaard
2015-09-15 22:34 ` Luca Ceresoli
2015-10-01 9:36 ` Luca Ceresoli
2015-10-01 10:03 ` Peter Korsgaard
2015-09-15 22:31 ` Luca Ceresoli
2015-09-16 7:32 ` Peter Korsgaard
2015-09-18 15:47 ` Luca Ceresoli
2015-09-09 9:34 ` Arnout Vandecappelle
2015-09-09 11:23 ` Thomas Petazzoni
2015-09-09 11:29 ` Thomas Petazzoni
2015-09-09 20:33 ` Arnout Vandecappelle
2015-09-14 16:07 ` Luca Ceresoli
2015-09-14 16:05 ` Luca Ceresoli
2015-09-14 19:34 ` Thomas Petazzoni [this message]
2015-09-14 20:19 ` Arnout Vandecappelle
2015-09-15 22:07 ` Luca Ceresoli
2015-09-08 21:28 ` [Buildroot] [RFC 4/6] system: strip the initial /dev for mdev-only /dev management Luca Ceresoli
2015-09-08 21:28 ` [Buildroot] [RFC 5/6] docs/manual: document "Dynamic using mdev only" " Luca Ceresoli
2015-09-09 10:39 ` Arnout Vandecappelle
2015-09-08 21:28 ` [Buildroot] [RFC 6/6] **** DO NOT COMMIT THIS **** ugly stuff to test mdev-only " Luca Ceresoli
2015-09-09 9:26 ` [Buildroot] [RFC 0/6] mdev-only /dev management (without devtmpfs) Arnout Vandecappelle
2015-09-09 11:30 ` Thomas Petazzoni
2015-09-14 21:03 ` Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150914213404.4fdd36a5@free-electrons.com \
--to=thomas.petazzoni@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox