From: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/2] makedevs: resync device creation with upstream busybox
Date: Sat, 5 Nov 2016 14:38:11 +0100 [thread overview]
Message-ID: <20161105133812.18485-1-arnout@mind.be> (raw)
In upstream busbyox, the code to create devices has been simplified:
the code for a single and for multiple devices is no longer duplicated.
Since we are going to change the device creation code next, it's
convenient to have only one copy to modify.
There are two behavioural changes with this, but they were introduced
silently together with other commits in upstream busybox.
- When mknod() fails, the chmod was still done. This is pointless so it
is no longer done now.
- There was a check for mode != -1; however, a mode of -1 would not
have worked anyway because all bits would be set for mknod(), which
would fail. So this check is redundant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
package/makedevs/makedevs.c | 47 +++++++++++++++------------------------------
1 file changed, 15 insertions(+), 32 deletions(-)
diff --git a/package/makedevs/makedevs.c b/package/makedevs/makedevs.c
index cacb144..7092b14 100644
--- a/package/makedevs/makedevs.c
+++ b/package/makedevs/makedevs.c
@@ -599,6 +599,8 @@ int main(int argc, char **argv)
} else
{
dev_t rdev;
+ unsigned i;
+ char *full_name_inc;
if (type == 'p') {
mode |= S_IFIFO;
@@ -614,43 +616,24 @@ int main(int argc, char **argv)
goto loop;
}
- if (count > 0) {
- int i;
- char *full_name_inc;
-
- full_name_inc = xmalloc(strlen(full_name) + 8);
- for (i = 0; i < count; i++) {
- sprintf(full_name_inc, "%s%d", full_name, start + i);
- rdev = makedev(major, minor + i * increment);
- if (mknod(full_name_inc, mode, rdev) == -1) {
- bb_perror_msg("line %d: Couldnt create node %s", linenum, full_name_inc);
- ret = EXIT_FAILURE;
- }
- else if (chown(full_name_inc, uid, gid) == -1) {
- bb_perror_msg("line %d: chown failed for %s", linenum, full_name_inc);
- ret = EXIT_FAILURE;
- }
- if ((mode != -1) && (chmod(full_name_inc, mode) < 0)){
- bb_perror_msg("line %d: chmod failed for %s", linenum, full_name_inc);
- ret = EXIT_FAILURE;
- }
- }
- free(full_name_inc);
- } else {
- rdev = makedev(major, minor);
- if (mknod(full_name, mode, rdev) == -1) {
- bb_perror_msg("line %d: Couldnt create node %s", linenum, full_name);
+ full_name_inc = xmalloc(strlen(full_name) + sizeof(int)*3 + 2);
+ if (count)
+ count--;
+ for (i = start; i <= start + count; i++) {
+ sprintf(full_name_inc, count ? "%s%u" : "%s", full_name, i);
+ rdev = makedev(major, minor + (i - start) * increment);
+ if (mknod(full_name_inc, mode, rdev) < 0) {
+ bb_perror_msg("line %d: can't create node %s", linenum, full_name_inc);
ret = EXIT_FAILURE;
- }
- else if (chown(full_name, uid, gid) == -1) {
- bb_perror_msg("line %d: chown failed for %s", linenum, full_name);
+ } else if (chown(full_name_inc, uid, gid) < 0) {
+ bb_perror_msg("line %d: can't chown %s", linenum, full_name_inc);
ret = EXIT_FAILURE;
- }
- if ((mode != -1) && (chmod(full_name, mode) < 0)){
- bb_perror_msg("line %d: chmod failed for %s", linenum, full_name);
+ } else if (chmod(full_name_inc, mode) < 0) {
+ bb_perror_msg("line %d: can't chmod %s", linenum, full_name_inc);
ret = EXIT_FAILURE;
}
}
+ free(full_name_inc);
}
loop:
free(line);
--
2.9.3
next reply other threads:[~2016-11-05 13:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-05 13:38 Arnout Vandecappelle [this message]
2016-11-05 13:38 ` [Buildroot] [PATCH 2/2] makedevs: make device node creation idempotent Arnout Vandecappelle
2016-11-05 15:04 ` Fabio Estevam
2016-11-05 17:20 ` Yann E. MORIN
2016-11-05 15:03 ` [Buildroot] [PATCH 1/2] makedevs: resync device creation with upstream busybox Fabio Estevam
2016-11-05 17:19 ` Yann E. MORIN
2016-11-05 22:33 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161105133812.18485-1-arnout@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox