From: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 2/2] makedevs: make device node creation idempotent
Date: Sat, 5 Nov 2016 14:38:12 +0100 [thread overview]
Message-ID: <20161105133812.18485-2-arnout@mind.be> (raw)
In-Reply-To: <20161105133812.18485-1-arnout@mind.be>
We use makedevs to create device nodes in the target rootfs. However,
this can be called several times, e.g. when building several filesystem
images or when rebuilding. When makedevs is called the second time, the
device node already exists so mknod() errors out.
This wasn't noticed before because fakeroot's mknod() wrapper
(incorrectly) does _not_ error out when the file exists already. Now
we switched from fakeroot to pseudo, the problem becomes apparent.
Before creating the device node, check if it already exists and if so,
if it has the correct device type and number. Change of mode and
ownership is still done.
This approach was preferred over removing the target files before
creating them, which would be simpler. However, when e.g. a file exists
as a normal file and makedevs specifies it as a device node, that
really is an error so we should detect it.
The other types don't have to be changed. The 'd' (directory) type is
already OK because it already only creates directories if they don't
exist yet. The 'f' (file mode) and 'r' (recursive) types only operate
on files and directories that exist already.
Patch also sent upstream to busybox.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: Fabio Estevam <festevam@gmail.com>
---
v2: check if pre-existing file is of correct type instead of simply
unlinking (Yann).
---
package/makedevs/makedevs.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/package/makedevs/makedevs.c b/package/makedevs/makedevs.c
index 7092b14..bcf0e0f 100644
--- a/package/makedevs/makedevs.c
+++ b/package/makedevs/makedevs.c
@@ -601,6 +601,7 @@ int main(int argc, char **argv)
dev_t rdev;
unsigned i;
char *full_name_inc;
+ struct stat st;
if (type == 'p') {
mode |= S_IFIFO;
@@ -622,10 +623,23 @@ int main(int argc, char **argv)
for (i = start; i <= start + count; i++) {
sprintf(full_name_inc, count ? "%s%u" : "%s", full_name, i);
rdev = makedev(major, minor + (i - start) * increment);
- if (mknod(full_name_inc, mode, rdev) < 0) {
+ if (stat(full_name_inc, &st) == 0) {
+ if ((mode & S_IFMT) != (st.st_mode & S_IFMT)) {
+ bb_error_msg("line %d: node %s exists but is of wrong file type", linenum, full_name_inc);
+ ret = EXIT_FAILURE;
+ continue;
+ }
+ if (st.st_rdev != rdev) {
+ bb_error_msg("line %d: node %s exists but is wrong device number", linenum, full_name_inc);
+ ret = EXIT_FAILURE;
+ continue;
+ }
+ } else if (mknod(full_name_inc, mode, rdev) < 0) {
bb_perror_msg("line %d: can't create node %s", linenum, full_name_inc);
ret = EXIT_FAILURE;
- } else if (chown(full_name_inc, uid, gid) < 0) {
+ continue;
+ }
+ if (chown(full_name_inc, uid, gid) < 0) {
bb_perror_msg("line %d: can't chown %s", linenum, full_name_inc);
ret = EXIT_FAILURE;
} else if (chmod(full_name_inc, mode) < 0) {
--
2.9.3
next prev parent reply other threads:[~2016-11-05 13:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-05 13:38 [Buildroot] [PATCH 1/2] makedevs: resync device creation with upstream busybox Arnout Vandecappelle
2016-11-05 13:38 ` Arnout Vandecappelle [this message]
2016-11-05 15:04 ` [Buildroot] [PATCH 2/2] makedevs: make device node creation idempotent Fabio Estevam
2016-11-05 17:20 ` Yann E. MORIN
2016-11-05 15:03 ` [Buildroot] [PATCH 1/2] makedevs: resync device creation with upstream busybox Fabio Estevam
2016-11-05 17:19 ` Yann E. MORIN
2016-11-05 22:33 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161105133812.18485-2-arnout@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox