* [Buildroot] freescale_p2020ds_defconfig fails to build
@ 2016-11-05 13:36 Thomas Petazzoni
2016-11-07 19:37 ` Gustavo Zacarias
0 siblings, 1 reply; 4+ messages in thread
From: Thomas Petazzoni @ 2016-11-05 13:36 UTC (permalink / raw)
To: buildroot
Hello Gustavo,
You are the one who submitted the freescale_p2020ds_defconfig to
Buildroot. However, this defconfig currently fails to build, because
the kernel is too old to build with gcc 5.x. Could you have a look and
propose a patch to fix this defconfig?
See
http://free-electrons.com/~thomas/pub/buildroot-defconfigs/freescale_p2020ds_defconfig.log.FAIL
for the full build log.
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] freescale_p2020ds_defconfig fails to build
2016-11-05 13:36 [Buildroot] freescale_p2020ds_defconfig fails to build Thomas Petazzoni
@ 2016-11-07 19:37 ` Gustavo Zacarias
2016-11-07 20:48 ` Thomas Petazzoni
0 siblings, 1 reply; 4+ messages in thread
From: Gustavo Zacarias @ 2016-11-07 19:37 UTC (permalink / raw)
To: buildroot
On 2016-11-05 10:36, Thomas Petazzoni wrote:
> Hello Gustavo,
>
> You are the one who submitted the freescale_p2020ds_defconfig to
> Buildroot. However, this defconfig currently fails to build, because
> the kernel is too old to build with gcc 5.x. Could you have a look and
> propose a patch to fix this defconfig?
>
> See
> http://free-electrons.com/~thomas/pub/buildroot-defconfigs/freescale_p2020ds_defconfig.log.FAIL
> for the full build log.
Hi.
Unfortunately i don't have one of these at my reach any more, and it
uses an ex-freescale (now nxp, eventually qualcomm) git kernel to work
around some design flaws, which makes vanilla kernels without patching
unusable last time i tried.
Other than locking gcc down to 4.9 (temporary fix) or dropping it
there's not much i can do.
Regards.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] freescale_p2020ds_defconfig fails to build
2016-11-07 19:37 ` Gustavo Zacarias
@ 2016-11-07 20:48 ` Thomas Petazzoni
2016-11-07 20:49 ` Gustavo Zacarias
0 siblings, 1 reply; 4+ messages in thread
From: Thomas Petazzoni @ 2016-11-07 20:48 UTC (permalink / raw)
To: buildroot
Hello,
On Mon, 07 Nov 2016 16:37:43 -0300, Gustavo Zacarias wrote:
> Unfortunately i don't have one of these at my reach any more, and it
> uses an ex-freescale (now nxp, eventually qualcomm) git kernel to work
> around some design flaws, which makes vanilla kernels without patching
> unusable last time i tried.
> Other than locking gcc down to 4.9 (temporary fix) or dropping it
> there's not much i can do.
OK, so you don't mind if I drop it?
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] freescale_p2020ds_defconfig fails to build
2016-11-07 20:48 ` Thomas Petazzoni
@ 2016-11-07 20:49 ` Gustavo Zacarias
0 siblings, 0 replies; 4+ messages in thread
From: Gustavo Zacarias @ 2016-11-07 20:49 UTC (permalink / raw)
To: buildroot
On 2016-11-07 17:48, Thomas Petazzoni wrote:
> Hello,
>
> On Mon, 07 Nov 2016 16:37:43 -0300, Gustavo Zacarias wrote:
>
>> Unfortunately i don't have one of these at my reach any more, and it
>> uses an ex-freescale (now nxp, eventually qualcomm) git kernel to work
>> around some design flaws, which makes vanilla kernels without patching
>> unusable last time i tried.
>> Other than locking gcc down to 4.9 (temporary fix) or dropping it
>> there's not much i can do.
>
> OK, so you don't mind if I drop it?
>
> Thomas
Hi.
Not one bit since it's untestable unless someone else raises his/her
hand.
Regards.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-11-07 20:49 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-05 13:36 [Buildroot] freescale_p2020ds_defconfig fails to build Thomas Petazzoni
2016-11-07 19:37 ` Gustavo Zacarias
2016-11-07 20:48 ` Thomas Petazzoni
2016-11-07 20:49 ` Gustavo Zacarias
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox