* [Buildroot] [autobuild.buildroot.net] Build results for 2016-11-23
@ 2016-11-24 7:30 Thomas Petazzoni
2016-11-24 8:44 ` [Buildroot] Analysis of build " Thomas Petazzoni
0 siblings, 1 reply; 9+ messages in thread
From: Thomas Petazzoni @ 2016-11-24 7:30 UTC (permalink / raw)
To: buildroot
Hello,
Build statistics for 2016-11-23
================================
successes : 161
failures : 25
timeouts : 1
TOTAL : 187
Classification of failures by reason
====================================
openssh-7.3p1 | 3
qextserialport-ada321a9ee46... | 3
gpsd-3.16 | 2
autossh-1.4e | 1
bind-9.11.0-P1 | 1
cups-2.1.4 | 1
docker-engine-v1.12.2 | 1
gauche-0.9.4 | 1
glmark2-fa71af2dfab711fac87... | 1
host-qemu-2.7.0 | 1
make[1]: *** Waiting for un... | 1
net-tools-3f170bff115303e92... | 1
ola-0.10.2 | 1
oprofile-1.1.0 | 1
perl-5.22.2 | 1
polarssl-1.2.19 | 1
tar-1.29 | 1
tcpreplay-4.1.1 | 1
vpnc-b1243d29e0c00312ead038... | 1
xfsprogs-4.7.0 | 1
xl2tp-v1.3.6 | 1
Detail of failures
===================
powerpc | autossh-1.4e | NOK | http://autobuild.buildroot.net/results/08a458572a2e9c599dd32b837b1e5c02a6721973
powerpc64le | bind-9.11.0-P1 | NOK | http://autobuild.buildroot.net/results/e14320a728975f2411451324739c8f30855d56b5
i586 | cups-2.1.4 | NOK | http://autobuild.buildroot.net/results/57446ad0e01a77710d2f986272b178de4f5dea51
x86_64 | docker-engine-v1.12.2 | NOK | http://autobuild.buildroot.net/results/42037d00edf075117f31d5199c77577eb31bc783
powerpc64le | gauche-0.9.4 | NOK | http://autobuild.buildroot.net/results/ba9a69e70127ae22be02561b1bf600b101fef541
arm | glmark2-fa71af2dfab711fac87... | NOK | http://autobuild.buildroot.net/results/3e0f5d0b5f6241ca2dc0627e2566d9cd7c9f5658
arc | gpsd-3.16 | NOK | http://autobuild.buildroot.net/results/e8593a8ebf2f05cc93235a8129a2ba8b839d6d90
arc | gpsd-3.16 | NOK | http://autobuild.buildroot.net/results/ff766f4f514c9cb4891873167f4e9b7870051883
powerpc64 | host-qemu-2.7.0 | NOK | http://autobuild.buildroot.net/results/f58ec73d906a5da49a88ed78492e3b5bf8cecdd4
arm | make[1]: *** Waiting for un... | TIM | http://autobuild.buildroot.net/results/cfde9ffd87d95e956b3359d1ad7522366c9336de
arm | net-tools-3f170bff115303e92... | NOK | http://autobuild.buildroot.net/results/7f9f1143cbd8700c8d5a3360373bd11fcf3d3821
i686 | ola-0.10.2 | NOK | http://autobuild.buildroot.net/results/750c9bcc753e2c1b7b05d6c43fabf4c405e15f04
i586 | openssh-7.3p1 | NOK | http://autobuild.buildroot.net/results/83f389d6ace773f4d9b1f7db236f6dbeebee911b
i586 | openssh-7.3p1 | NOK | http://autobuild.buildroot.net/results/0a9c3b18d01f5c5cad34b86888557cbcf91672c7
i586 | openssh-7.3p1 | NOK | http://autobuild.buildroot.net/results/c3c96788d37fa14e0ccf034f85771d6ad2692f56
powerpc64 | oprofile-1.1.0 | NOK | http://autobuild.buildroot.net/results/314446eb6824277187ce3e2a7285226d67f731f5
arc | perl-5.22.2 | NOK | http://autobuild.buildroot.net/results/34d8fd6f3e137bdfbe7c4ccc9061059282773df6
x86_64 | polarssl-1.2.19 | NOK | http://autobuild.buildroot.net/results/3aa3edd71c0a0c879939191b750d07bd9e868797
xtensa | qextserialport-ada321a9ee46... | NOK | http://autobuild.buildroot.net/results/818b564a6e23bcecf4afc7e53811227b08e5f4eb
arc | qextserialport-ada321a9ee46... | NOK | http://autobuild.buildroot.net/results/0b6c2d7c63329f5e790f02ccd29f14a317eadc71
mips | qextserialport-ada321a9ee46... | NOK | http://autobuild.buildroot.net/results/ac552b63c6fb099a136066cda421f68e639808fa
arm | tar-1.29 | NOK | http://autobuild.buildroot.net/results/6c06943f6e08ad3d910206abf9b9ec96d67afc3e
x86_64 | tcpreplay-4.1.1 | NOK | http://autobuild.buildroot.net/results/5aa6df0d88b55e44175cb28a96925b7b094284e3
arm | vpnc-b1243d29e0c00312ead038... | NOK | http://autobuild.buildroot.net/results/18ae43d13038f74a39cb1da10a3e54e7e9c204f9
i586 | xfsprogs-4.7.0 | NOK | http://autobuild.buildroot.net/results/372ca24077b17ba1a9829e817dd73e852b12fb05
arm | xl2tp-v1.3.6 | NOK | http://autobuild.buildroot.net/results/baea66ac57aa34c7d7bdc993544c0f010fee4a9b
--
http://autobuild.buildroot.net
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] Analysis of build results for 2016-11-23
2016-11-24 7:30 [Buildroot] [autobuild.buildroot.net] Build results for 2016-11-23 Thomas Petazzoni
@ 2016-11-24 8:44 ` Thomas Petazzoni
2016-11-24 15:26 ` Waldemar Brodkorb
` (5 more replies)
0 siblings, 6 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2016-11-24 8:44 UTC (permalink / raw)
To: buildroot
Hello,
Christian, Waldemar, Sam, Bernd, Alexey, Vlad, Vicente, J?rg, Fran?ois,
please see below, there are some questions for you.
Summary of the build failures:
- musl related: 8
- misc: 7
- static linking: 4
- PowerPC64le libtool: 2
- ARC related: 2
- uClibc-ng related: 1
- unknown: 1
So musl continues to be a pain to support, causing the biggest number
of build failures...
On Thu, 24 Nov 2016 08:30:11 +0100 (CET), Thomas Petazzoni wrote:
> powerpc | autossh-1.4e | NOK | http://autobuild.buildroot.net/results/08a458572a2e9c599dd32b837b1e5c02a6721973
unwind-dw2-fde-dip.c:465: undefined reference to `dl_iterate_phdr'
Waldemar, this is with uClibc-ng, and it seems like a relatively recent
problem. Any idea?
> powerpc64le | bind-9.11.0-P1 | NOK | http://autobuild.buildroot.net/results/e14320a728975f2411451324739c8f30855d56b5
The usual PowerPC64le issue with libtool.
> i586 | cups-2.1.4 | NOK | http://autobuild.buildroot.net/results/57446ad0e01a77710d2f986272b178de4f5dea51
The usual musl/i586/SSP issue.
> x86_64 | docker-engine-v1.12.2 | NOK | http://autobuild.buildroot.net/results/42037d00edf075117f31d5199c77577eb31bc783
I don't see what the error is. Christian, could you try to reproduce
and investigate?
> powerpc64le | gauche-0.9.4 | NOK | http://autobuild.buildroot.net/results/ba9a69e70127ae22be02561b1bf600b101fef541
Sam, is this also the libtool issue, or something else?
> arm | glmark2-fa71af2dfab711fac87... | NOK | http://autobuild.buildroot.net/results/3e0f5d0b5f6241ca2dc0627e2566d9cd7c9f5658
Checking for 'gbm' : not found
The configuration failed
Bernd, could you have a look at this?
> arc | gpsd-3.16 | NOK | http://autobuild.buildroot.net/results/e8593a8ebf2f05cc93235a8129a2ba8b839d6d90
> arc | gpsd-3.16 | NOK | http://autobuild.buildroot.net/results/ff766f4f514c9cb4891873167f4e9b7870051883
error: 'memory_order_seq_cst' was not declared in this scope
Alexey, Vlad, could you have a look?
> powerpc64 | host-qemu-2.7.0 | NOK | http://autobuild.buildroot.net/results/f58ec73d906a5da49a88ed78492e3b5bf8cecdd4
Sam, maybe this indicates I should have applied your qemu patch on
master and not next?
> arm | make[1]: *** Waiting for un... | TIM | http://autobuild.buildroot.net/results/cfde9ffd87d95e956b3359d1ad7522366c9336de
Seems to be a real timeout, so nothing to worry about.
> arm | net-tools-3f170bff115303e92... | NOK | http://autobuild.buildroot.net/results/7f9f1143cbd8700c8d5a3360373bd11fcf3d3821
Usual musl issue. Vicente, you already looked at net-tools recently,
could you look into this?
> i686 | ola-0.10.2 | NOK | http://autobuild.buildroot.net/results/750c9bcc753e2c1b7b05d6c43fabf4c405e15f04
checking for python module: numpy... no
configure: error: failed to find required module numpy
make: *** [/home/peko/autobuild/instance-2/output/build/ola-0.10.2/.stamp_configured] Error 1
J?rg, you have updated the ola package recently, could you have a look?
Also, if you're interested in ola, could you add yourself in the
DEVELOPERS file for it? The original submitter, who is mentioned in the
DEVELOPERS file, doesn't seem to be responsive.
> i586 | openssh-7.3p1 | NOK | http://autobuild.buildroot.net/results/83f389d6ace773f4d9b1f7db236f6dbeebee911b
> i586 | openssh-7.3p1 | NOK | http://autobuild.buildroot.net/results/0a9c3b18d01f5c5cad34b86888557cbcf91672c7
> i586 | openssh-7.3p1 | NOK | http://autobuild.buildroot.net/results/c3c96788d37fa14e0ccf034f85771d6ad2692f56
The musl/i586/musl issue.
> powerpc64 | oprofile-1.1.0 | NOK | http://autobuild.buildroot.net/results/314446eb6824277187ce3e2a7285226d67f731f5
checking for perfmon/pfmlib.h... no
configure: error: pfmlib.h not found; may be provided by libpfm devel or papi devel package
Sam: we currently have:
select BR2_PACKAGE_LIBPFM4 if BR2_powerpc
# libpfm4 is needed on PowerPC, and requires thread support
depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL || !BR2_powerpc
Perhaps we need to also select libpfm4 on powerpc64 (and le) ?
> arc | perl-5.22.2 | NOK | http://autobuild.buildroot.net/results/34d8fd6f3e137bdfbe7c4ccc9061059282773df6
/home/peko/autobuild/instance-2/output/host/usr/arc-buildroot-linux-uclibc/sysroot/usr/lib/libgdbm.a(gdbmerrno.o): In function `gdbm_strerror':
/home/peko/autobuild/instance-2/output/build/gdbm-1.12/src/gdbmerrno.c:71: undefined reference to `libintl_dgettext'
That's a static linking issue. Fran?ois, could you have a look?
> x86_64 | polarssl-1.2.19 | NOK | http://autobuild.buildroot.net/results/3aa3edd71c0a0c879939191b750d07bd9e868797
Static linking issue in polarssl, but Gustavo wants to remove polarssl,
so I guess he won't be very interested in fixing build issues with it.
> xtensa | qextserialport-ada321a9ee46... | NOK | http://autobuild.buildroot.net/results/818b564a6e23bcecf4afc7e53811227b08e5f4eb
> arc | qextserialport-ada321a9ee46... | NOK | http://autobuild.buildroot.net/results/0b6c2d7c63329f5e790f02ccd29f14a317eadc71
> mips | qextserialport-ada321a9ee46... | NOK | http://autobuild.buildroot.net/results/ac552b63c6fb099a136066cda421f68e639808fa
Arnout, those issues are introduced by your recent changes to the
qextserialport package. Could you have a look?
> arm | tar-1.29 | NOK | http://autobuild.buildroot.net/results/6c06943f6e08ad3d910206abf9b9ec96d67afc3e
quotearg.c:(.text+0x12cc): multiple definition of `quote'
/home/peko/autobuild/instance-2/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/libacl.a(quote.o):/home/peko/autobuild/instance-2/output/build/acl-2.2.52/libmisc/quote.c:27: first defined here
collect2: error: ld returned 1 exit status
Requires a symbol renaming.
> x86_64 | tcpreplay-4.1.1 | NOK | http://autobuild.buildroot.net/results/5aa6df0d88b55e44175cb28a96925b7b094284e3
sendpacket.c:152:13: error: conflicting types for 'socklen_t'
typedef int socklen_t;
Usual musl related issue...
> arm | vpnc-b1243d29e0c00312ead038... | NOK | http://autobuild.buildroot.net/results/18ae43d13038f74a39cb1da10a3e54e7e9c204f9
Another static linking issue:
/home/peko/autobuild/instance-0/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libgpg-error.a(libgpg_error_la-init.o): In function `_gpg_err_init':
init.c:(.text+0xc): undefined reference to `libintl_bindtextdomain'
> i586 | xfsprogs-4.7.0 | NOK | http://autobuild.buildroot.net/results/372ca24077b17ba1a9829e817dd73e852b12fb05
Musl issue.
> arm | xl2tp-v1.3.6 | NOK | http://autobuild.buildroot.net/results/baea66ac57aa34c7d7bdc993544c0f010fee4a9b
Musl issue.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] Analysis of build results for 2016-11-23
2016-11-24 8:44 ` [Buildroot] Analysis of build " Thomas Petazzoni
@ 2016-11-24 15:26 ` Waldemar Brodkorb
2016-11-24 19:24 ` Jörg Krause
` (4 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Waldemar Brodkorb @ 2016-11-24 15:26 UTC (permalink / raw)
To: buildroot
Hi Thomas,
Thomas Petazzoni wrote,
> Hello,
>
> Christian, Waldemar, Sam, Bernd, Alexey, Vlad, Vicente, J?rg, Fran?ois,
> please see below, there are some questions for you.
>
> Summary of the build failures:
>
> - musl related: 8
> - misc: 7
> - static linking: 4
> - PowerPC64le libtool: 2
> - ARC related: 2
> - uClibc-ng related: 1
> - unknown: 1
>
> So musl continues to be a pain to support, causing the biggest number
> of build failures...
>
> On Thu, 24 Nov 2016 08:30:11 +0100 (CET), Thomas Petazzoni wrote:
>
> > powerpc | autossh-1.4e | NOK | http://autobuild.buildroot.net/results/08a458572a2e9c599dd32b837b1e5c02a6721973
>
> unwind-dw2-fde-dip.c:465: undefined reference to `dl_iterate_phdr'
>
> Waldemar, this is with uClibc-ng, and it seems like a relatively recent
> problem. Any idea?
>
I thought it is a Xtensa specific issue, as now it happens for
PowerPC I need to dig deeper.
Strange that I couldn't reproduce it with OpenADK with uClibc-ng
1.0.19 and master.
best regards
Waldemar
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] Analysis of build results for 2016-11-23
2016-11-24 8:44 ` [Buildroot] Analysis of build " Thomas Petazzoni
2016-11-24 15:26 ` Waldemar Brodkorb
@ 2016-11-24 19:24 ` Jörg Krause
2016-11-24 19:58 ` Christian Stewart
` (3 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Jörg Krause @ 2016-11-24 19:24 UTC (permalink / raw)
To: buildroot
Hi Thomas,
On Thu, 2016-11-24 at 09:44 +0100, Thomas Petazzoni wrote:
> Hello,
>
> > ????????i686 |?????????????????????ola-0.10.2 | NOK | http://autobu
> > ild.buildroot.net/results/750c9bcc753e2c1b7b05d6c43fabf4c405e15f04
>
> checking for python module: numpy... no
> configure: error: failed to find required module numpy
> make: *** [/home/peko/autobuild/instance-2/output/build/ola-
> 0.10.2/.stamp_configured] Error 1
>
> J?rg, you have updated the ola package recently, could you have a
> look?
Yes, I'll have a look.
> Also, if you're interested in ola, could you add yourself in the
> DEVELOPERS file for it? The original submitter, who is mentioned in
> the DEVELOPERS file, doesn't seem to be responsive.
I was just fixing an issue I already faced with another package. I am
not using ola, so I'd rather be not a maintainer for it. Sorry!
Best regards,
J?rg
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] Analysis of build results for 2016-11-23
2016-11-24 8:44 ` [Buildroot] Analysis of build " Thomas Petazzoni
2016-11-24 15:26 ` Waldemar Brodkorb
2016-11-24 19:24 ` Jörg Krause
@ 2016-11-24 19:58 ` Christian Stewart
2016-11-24 22:12 ` Jörg Krause
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Christian Stewart @ 2016-11-24 19:58 UTC (permalink / raw)
To: buildroot
Hi Thomas,
On Thu, Nov 24, 2016 at 3:44 AM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
>> x86_64 | docker-engine-v1.12.2 | NOK | http://autobuild.buildroot.net/results/42037d00edf075117f31d5199c77577eb31bc783
>
> I don't see what the error is. Christian, could you try to reproduce
> and investigate?
Very strange, I see no specific errors and I can't reproduce it
locally using the same defconfig. Maybe some kind of build flake? I
looked into error 2 from the go compiler but that seems to be a
generic error code. Do you think it might have run out of memory or
something similar?
I run automated builds of Buildroot as well with similar configs on
resource constrained cloud machines and have not yet run into anything
like this.
Best,
Christian Stewart
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] Analysis of build results for 2016-11-23
2016-11-24 8:44 ` [Buildroot] Analysis of build " Thomas Petazzoni
` (2 preceding siblings ...)
2016-11-24 19:58 ` Christian Stewart
@ 2016-11-24 22:12 ` Jörg Krause
2016-11-25 0:22 ` Sam Bobroff
2016-11-25 10:47 ` Alexey Brodkin
5 siblings, 0 replies; 9+ messages in thread
From: Jörg Krause @ 2016-11-24 22:12 UTC (permalink / raw)
To: buildroot
Hello,
On Thu, 2016-11-24 at 09:44 +0100, Thomas Petazzoni wrote:
> Hello,
>
> > ?????????arm |???????????????????xl2tp-v1.3.6 | NOK | http://autobu
> > ild.buildroot.net/results/baea66ac57aa34c7d7bdc993544c0f010fee4a9b
>
> Musl issue.
I had a look at this. xl2tp define a macro USE_KERNEL which adds
support for using the kernel module pppol2tp. Using this macro with
musl fails with the well-known linux header redefinitions.
As the package does not provide a linux dependency I would suggest to
uncomment this macro using sed (sed is already used to remove a CFLAG
option from the Makefile).
What do you think?
Best regards,
J?rg Krause
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] Analysis of build results for 2016-11-23
2016-11-24 8:44 ` [Buildroot] Analysis of build " Thomas Petazzoni
` (3 preceding siblings ...)
2016-11-24 22:12 ` Jörg Krause
@ 2016-11-25 0:22 ` Sam Bobroff
2016-11-25 8:09 ` Thomas Petazzoni
2016-11-25 10:47 ` Alexey Brodkin
5 siblings, 1 reply; 9+ messages in thread
From: Sam Bobroff @ 2016-11-25 0:22 UTC (permalink / raw)
To: buildroot
On Thu, Nov 24, 2016 at 09:44:29AM +0100, Thomas Petazzoni wrote:
> Hello,
>
> Christian, Waldemar, Sam, Bernd, Alexey, Vlad, Vicente, J?rg, Fran?ois,
> please see below, there are some questions for you.
>
> Summary of the build failures:
>
> - musl related: 8
> - misc: 7
> - static linking: 4
> - PowerPC64le libtool: 2
> - ARC related: 2
> - uClibc-ng related: 1
> - unknown: 1
>
> So musl continues to be a pain to support, causing the biggest number
> of build failures...
>
> On Thu, 24 Nov 2016 08:30:11 +0100 (CET), Thomas Petazzoni wrote:
>
> > powerpc | autossh-1.4e | NOK | http://autobuild.buildroot.net/results/08a458572a2e9c599dd32b837b1e5c02a6721973
>
> unwind-dw2-fde-dip.c:465: undefined reference to `dl_iterate_phdr'
>
> Waldemar, this is with uClibc-ng, and it seems like a relatively recent
> problem. Any idea?
>
> > powerpc64le | bind-9.11.0-P1 | NOK | http://autobuild.buildroot.net/results/e14320a728975f2411451324739c8f30855d56b5
>
> The usual PowerPC64le issue with libtool.
Yep.
> > i586 | cups-2.1.4 | NOK | http://autobuild.buildroot.net/results/57446ad0e01a77710d2f986272b178de4f5dea51
>
> The usual musl/i586/SSP issue.
>
> > x86_64 | docker-engine-v1.12.2 | NOK | http://autobuild.buildroot.net/results/42037d00edf075117f31d5199c77577eb31bc783
>
> I don't see what the error is. Christian, could you try to reproduce
> and investigate?
>
> > powerpc64le | gauche-0.9.4 | NOK | http://autobuild.buildroot.net/results/ba9a69e70127ae22be02561b1bf600b101fef541
>
> Sam, is this also the libtool issue, or something else?
I think so. It builds fine for me using the generic fix.
> > arm | glmark2-fa71af2dfab711fac87... | NOK | http://autobuild.buildroot.net/results/3e0f5d0b5f6241ca2dc0627e2566d9cd7c9f5658
>
> Checking for 'gbm' : not found
> The configuration failed
>
> Bernd, could you have a look at this?
>
> > arc | gpsd-3.16 | NOK | http://autobuild.buildroot.net/results/e8593a8ebf2f05cc93235a8129a2ba8b839d6d90
> > arc | gpsd-3.16 | NOK | http://autobuild.buildroot.net/results/ff766f4f514c9cb4891873167f4e9b7870051883
>
> error: 'memory_order_seq_cst' was not declared in this scope
>
> Alexey, Vlad, could you have a look?
>
> > powerpc64 | host-qemu-2.7.0 | NOK | http://autobuild.buildroot.net/results/f58ec73d906a5da49a88ed78492e3b5bf8cecdd4
>
> Sam, maybe this indicates I should have applied your qemu patch on
> master and not next?
Yes, it would fix this failure.
> > arm | make[1]: *** Waiting for un... | TIM | http://autobuild.buildroot.net/results/cfde9ffd87d95e956b3359d1ad7522366c9336de
>
> Seems to be a real timeout, so nothing to worry about.
>
> > arm | net-tools-3f170bff115303e92... | NOK | http://autobuild.buildroot.net/results/7f9f1143cbd8700c8d5a3360373bd11fcf3d3821
>
> Usual musl issue. Vicente, you already looked at net-tools recently,
> could you look into this?
>
> > i686 | ola-0.10.2 | NOK | http://autobuild.buildroot.net/results/750c9bcc753e2c1b7b05d6c43fabf4c405e15f04
>
> checking for python module: numpy... no
> configure: error: failed to find required module numpy
> make: *** [/home/peko/autobuild/instance-2/output/build/ola-0.10.2/.stamp_configured] Error 1
>
> J?rg, you have updated the ola package recently, could you have a look?
> Also, if you're interested in ola, could you add yourself in the
> DEVELOPERS file for it? The original submitter, who is mentioned in the
> DEVELOPERS file, doesn't seem to be responsive.
>
> > i586 | openssh-7.3p1 | NOK | http://autobuild.buildroot.net/results/83f389d6ace773f4d9b1f7db236f6dbeebee911b
> > i586 | openssh-7.3p1 | NOK | http://autobuild.buildroot.net/results/0a9c3b18d01f5c5cad34b86888557cbcf91672c7
> > i586 | openssh-7.3p1 | NOK | http://autobuild.buildroot.net/results/c3c96788d37fa14e0ccf034f85771d6ad2692f56
>
> The musl/i586/musl issue.
>
> > powerpc64 | oprofile-1.1.0 | NOK | http://autobuild.buildroot.net/results/314446eb6824277187ce3e2a7285226d67f731f5
>
> checking for perfmon/pfmlib.h... no
> configure: error: pfmlib.h not found; may be provided by libpfm devel or papi devel package
>
> Sam: we currently have:
>
> select BR2_PACKAGE_LIBPFM4 if BR2_powerpc
> # libpfm4 is needed on PowerPC, and requires thread support
> depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL || !BR2_powerpc
>
> Perhaps we need to also select libpfm4 on powerpc64 (and le) ?
It looks like we do. I tried a build of oprofile on powerpc64le and it fails as above unless pfmlib is present. It will almost certainly be the same on powerpc64. Would you like me to send a patch?
> > arc | perl-5.22.2 | NOK | http://autobuild.buildroot.net/results/34d8fd6f3e137bdfbe7c4ccc9061059282773df6
>
> /home/peko/autobuild/instance-2/output/host/usr/arc-buildroot-linux-uclibc/sysroot/usr/lib/libgdbm.a(gdbmerrno.o): In function `gdbm_strerror':
> /home/peko/autobuild/instance-2/output/build/gdbm-1.12/src/gdbmerrno.c:71: undefined reference to `libintl_dgettext'
>
> That's a static linking issue. Fran?ois, could you have a look?
>
> > x86_64 | polarssl-1.2.19 | NOK | http://autobuild.buildroot.net/results/3aa3edd71c0a0c879939191b750d07bd9e868797
>
> Static linking issue in polarssl, but Gustavo wants to remove polarssl,
> so I guess he won't be very interested in fixing build issues with it.
>
> > xtensa | qextserialport-ada321a9ee46... | NOK | http://autobuild.buildroot.net/results/818b564a6e23bcecf4afc7e53811227b08e5f4eb
> > arc | qextserialport-ada321a9ee46... | NOK | http://autobuild.buildroot.net/results/0b6c2d7c63329f5e790f02ccd29f14a317eadc71
> > mips | qextserialport-ada321a9ee46... | NOK | http://autobuild.buildroot.net/results/ac552b63c6fb099a136066cda421f68e639808fa
>
> Arnout, those issues are introduced by your recent changes to the
> qextserialport package. Could you have a look?
>
> > arm | tar-1.29 | NOK | http://autobuild.buildroot.net/results/6c06943f6e08ad3d910206abf9b9ec96d67afc3e
>
> quotearg.c:(.text+0x12cc): multiple definition of `quote'
> /home/peko/autobuild/instance-2/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/libacl.a(quote.o):/home/peko/autobuild/instance-2/output/build/acl-2.2.52/libmisc/quote.c:27: first defined here
> collect2: error: ld returned 1 exit status
>
> Requires a symbol renaming.
>
> > x86_64 | tcpreplay-4.1.1 | NOK | http://autobuild.buildroot.net/results/5aa6df0d88b55e44175cb28a96925b7b094284e3
>
> sendpacket.c:152:13: error: conflicting types for 'socklen_t'
> typedef int socklen_t;
>
> Usual musl related issue...
>
> > arm | vpnc-b1243d29e0c00312ead038... | NOK | http://autobuild.buildroot.net/results/18ae43d13038f74a39cb1da10a3e54e7e9c204f9
>
> Another static linking issue:
>
> /home/peko/autobuild/instance-0/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libgpg-error.a(libgpg_error_la-init.o): In function `_gpg_err_init':
> init.c:(.text+0xc): undefined reference to `libintl_bindtextdomain'
>
> > i586 | xfsprogs-4.7.0 | NOK | http://autobuild.buildroot.net/results/372ca24077b17ba1a9829e817dd73e852b12fb05
>
> Musl issue.
>
> > arm | xl2tp-v1.3.6 | NOK | http://autobuild.buildroot.net/results/baea66ac57aa34c7d7bdc993544c0f010fee4a9b
>
> Musl issue.
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] Analysis of build results for 2016-11-23
2016-11-25 0:22 ` Sam Bobroff
@ 2016-11-25 8:09 ` Thomas Petazzoni
0 siblings, 0 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2016-11-25 8:09 UTC (permalink / raw)
To: buildroot
Hello,
On Fri, 25 Nov 2016 11:22:48 +1100, Sam Bobroff wrote:
> > > powerpc64 | oprofile-1.1.0 | NOK | http://autobuild.buildroot.net/results/314446eb6824277187ce3e2a7285226d67f731f5
> >
> > checking for perfmon/pfmlib.h... no
> > configure: error: pfmlib.h not found; may be provided by libpfm devel or papi devel package
> >
> > Sam: we currently have:
> >
> > select BR2_PACKAGE_LIBPFM4 if BR2_powerpc
> > # libpfm4 is needed on PowerPC, and requires thread support
> > depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL || !BR2_powerpc
> >
> > Perhaps we need to also select libpfm4 on powerpc64 (and le) ?
>
> It looks like we do. I tried a build of oprofile on powerpc64le and
> it fails as above unless pfmlib is present. It will almost certainly
> be the same on powerpc64. Would you like me to send a patch?
Yes, please. Note that you also need to update the line:
depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL || !BR2_powerpc
Indeed: on PowerPC/PowerPC64 pfmlib is *required* and pfmlib needs NPTL
thread support, so we must have a BR2_TOOLCHAIN_HAS_THREADS_NPTL
dependency on PowerPC/PowerPC64, but not on other architectures. Since
this might be growing a bit long in terms of architectures to list, I
would suggest to introduce a hidden Config.in boolean:
# oprofile requires the libpfm4 dependency on a number of architectures
config BR2_PACKAGE_OPROFILE_NEEDS_LIBPFM4
config
default y if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le
(of course I have no idea if powerpc64le is supported, you would have
to check).
And then, in the BR2_PACKAGE_OPROFILE option, do something like:
select BR2_PACKAGE_LIBPFM4 if BR2_PACKAGE_OPROFILE_NEEDS_LIBPFM4
depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL || !BR2_PACKAGE_OPROFILE_NEEDS_LIBPFM4
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] Analysis of build results for 2016-11-23
2016-11-24 8:44 ` [Buildroot] Analysis of build " Thomas Petazzoni
` (4 preceding siblings ...)
2016-11-25 0:22 ` Sam Bobroff
@ 2016-11-25 10:47 ` Alexey Brodkin
5 siblings, 0 replies; 9+ messages in thread
From: Alexey Brodkin @ 2016-11-25 10:47 UTC (permalink / raw)
To: buildroot
Hi Thomas, all
On Thu, 2016-11-24 at 09:44 +0100, Thomas Petazzoni wrote:
> Hello,
>
> Christian, Waldemar, Sam, Bernd, Alexey, Vlad, Vicente, J?rg, Fran?ois,
> please see below, there are some questions for you.
>
> Summary of the build failures:
>
> ?- musl related: 8
> ?- misc: 7
> ?- static linking: 4
> ?- PowerPC64le libtool: 2
> ?- ARC related: 2
> ?- uClibc-ng related: 1
> ?- unknown: 1
> >
> > ?????????arc |??????????????????????gpsd-3.16 | NOK | http://autobuild.buildroot.net/results/e8593a8ebf2f05cc93235a8
> > 129a2ba8b839d6d90
> > ?????????arc |??????????????????????gpsd-3.16 | NOK | http://autobuild.buildroot.net/results/ff766f4f514c9cb48918731
> > 67f4e9b7870051883
>
> error: 'memory_order_seq_cst' was not declared in this scope
>
> Alexey, Vlad, could you have a look?
This is upstream problem with gcc 6.x being discussed in this thread:
http://lists.nongnu.org/archive/html/gpsd-dev/2016-09/msg00082.html
That said on my Fedora 24 I'm easily seeing the same problem trying to build gpsd.
The only work-around for gcc 6.x now is adding "-std=gnu++98" to both CFLAGS and CXXFLAGS.
I'll try to come up with something for BR in the meantime.
-Alexey
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2016-11-25 10:47 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-24 7:30 [Buildroot] [autobuild.buildroot.net] Build results for 2016-11-23 Thomas Petazzoni
2016-11-24 8:44 ` [Buildroot] Analysis of build " Thomas Petazzoni
2016-11-24 15:26 ` Waldemar Brodkorb
2016-11-24 19:24 ` Jörg Krause
2016-11-24 19:58 ` Christian Stewart
2016-11-24 22:12 ` Jörg Krause
2016-11-25 0:22 ` Sam Bobroff
2016-11-25 8:09 ` Thomas Petazzoni
2016-11-25 10:47 ` Alexey Brodkin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox