[Buildroot] [PATCH] qemu-ppc: fixup wrong startup example, use either -hda or -drive

[Buildroot] [PATCH] qemu-ppc: fixup wrong startup example, use either -hda or -drive

[Waldemar Brodkorb]

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
---
 While playing with musl+ppc I recognized this.
 Musl-PPC with gcc 5.x is broken, as the gcc patches are incomplete.
 gcc 6.x works with the qemu samples, so maybe disable gcc 5.x for
 musl ppc?
---
 board/qemu/ppc-g3beige/readme.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/qemu/ppc-g3beige/readme.txt b/board/qemu/ppc-g3beige/readme.txt
index 070fcbb..3bd88a6 100644
--- a/board/qemu/ppc-g3beige/readme.txt
+++ b/board/qemu/ppc-g3beige/readme.txt
@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda -drive file=output/images/rootfs.ext2,format=raw -append "console=ttyS0 root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user
+  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "console=ttyS0 root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
-- 
2.1.4

[Buildroot] [PATCH] qemu-ppc: fixup wrong startup example, use either -hda or -drive

[Thomas Petazzoni]

Hello,

On Sat, 26 Nov 2016 09:42:58 +0100, Waldemar Brodkorb wrote:
> Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>

Applied to master, thanks!

>  While playing with musl+ppc I recognized this.
>  Musl-PPC with gcc 5.x is broken, as the gcc patches are incomplete.
>  gcc 6.x works with the qemu samples, so maybe disable gcc 5.x for
>  musl ppc?

Or better: add the appropriate patches to make musl/gcc5/ppc work
properly.

Thanks!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com