[Buildroot] [PATCH v4 1/2] ti-cgt-pru: add package for PRU Host toolchain

[Buildroot] [PATCH v4 1/2] ti-cgt-pru: add package for PRU Host toolchain

[Ash Charles]

TI provides a binary code generation toolchain to develop firmware for
the programmable real-time unit/co-processor found in some SOCs such as
some models in the AM335x line. This toolchain includes C/C++ support
(clpru) rather than just assembler (pasm) supported by the pre-existing
am335x-pru-package [1].  Following the lead of the Yocto meta-ti
layer [2], this package provides a host toolchain suitable for an x86
(or x86_64) Linux targeting an ARM-based PRU core.

[1] http://processors.wiki.ti.com/index.php/PRU_Assembly_Instructions#pasm_vs._clpru
[2] http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/tree/recipes-ti/devtools/ti-cgt-pru_2.1.1.bb

Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
---
Changes v1 --> v2
 * extract source to $(@D) cleanly (suggested by Thomas)
 * be more explicit about licensing (suggested by Arnout)
 * switch to buildroot-suitable name: PRU_CGT --> TI_CGT_PRU_DIR
 * sundry clarifications

Changes v2 --> v3
 * avoid re-use TI_CGT_PRU_DIR --> TI_CGT_PRU_INSTALLDIR
 * don't install to a version-specific path
 * typo fixes
 (all suggested courtesy of Arnout)

Changes v3 --> v4
 * don't put TI_CGT_PRU_INSTALLDIR right under HOST_DIR (Thomas/ Arnout)

Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
---
 package/Config.in.host             |  1 +
 package/ti-cgt-pru/Config.in.host  | 12 ++++++++++++
 package/ti-cgt-pru/ti-cgt-pru.hash |  2 ++
 package/ti-cgt-pru/ti-cgt-pru.mk   | 34 ++++++++++++++++++++++++++++++++++
 4 files changed, 49 insertions(+)
 create mode 100644 package/ti-cgt-pru/Config.in.host
 create mode 100644 package/ti-cgt-pru/ti-cgt-pru.hash
 create mode 100644 package/ti-cgt-pru/ti-cgt-pru.mk

diff --git a/package/Config.in.host b/package/Config.in.host
index 3b115c5..e244694 100644
--- a/package/Config.in.host
+++ b/package/Config.in.host
@@ -39,6 +39,7 @@ menu "Host utilities"
 	source "package/squashfs/Config.in.host"
 	source "package/sunxi-tools/Config.in.host"
 	source "package/tegrarcm/Config.in.host"
+	source "package/ti-cgt-pru/Config.in.host"
 	source "package/uboot-tools/Config.in.host"
 	source "package/util-linux/Config.in.host"
 	source "package/vboot-utils/Config.in.host"
diff --git a/package/ti-cgt-pru/Config.in.host b/package/ti-cgt-pru/Config.in.host
new file mode 100644
index 0000000..3797cda
--- /dev/null
+++ b/package/ti-cgt-pru/Config.in.host
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_HOST_TI_CGT_PRU
+	bool "host ti-cgt-pru"
+	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
+	depends on BR2_arm
+	help
+	  This package provides the Code Generation Tools for the PRU
+	  unit found on some TI processors e.g. AM3358.
+
+	  Note: this is a binary cross toolchain that runs on x86 hosts
+	  targeting PRU cores found alongside some ARM processors.
+
+	  http://processors.wiki.ti.com/index.php/Programmable_Realtime_Unit_Software_Development
diff --git a/package/ti-cgt-pru/ti-cgt-pru.hash b/package/ti-cgt-pru/ti-cgt-pru.hash
new file mode 100644
index 0000000..1c19b33
--- /dev/null
+++ b/package/ti-cgt-pru/ti-cgt-pru.hash
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256	df85cd1ed3aea12d577854ece11bf5f2af6ace8c39959eea4cf2fa5973924e0e	ti_cgt_pru_2.1.3_linux_installer_x86.bin
diff --git a/package/ti-cgt-pru/ti-cgt-pru.mk b/package/ti-cgt-pru/ti-cgt-pru.mk
new file mode 100644
index 0000000..81bde54
--- /dev/null
+++ b/package/ti-cgt-pru/ti-cgt-pru.mk
@@ -0,0 +1,34 @@
+################################################################################
+#
+# ti-cgt-pru
+#
+################################################################################
+
+TI_CGT_PRU_VERSION = 2.1.3
+TI_CGT_PRU_SOURCE = ti_cgt_pru_$(TI_CGT_PRU_VERSION)_linux_installer_x86.bin
+TI_CGT_PRU_SITE = http://software-dl.ti.com/codegen/esd/cgt_public_sw/PRU/$(TI_CGT_PRU_VERSION)
+TI_CGT_PRU_LICENSE = TI Technology and Software Publicly Available License (compiler + PRU library), \
+	Boost Software License 1.0 (compiler), \
+	BSD-2c, BSD-3c, MIT, Academic Free License 3.0, Hewlett-Packard (PRU library)
+TI_CGT_PRU_LICENSE_FILES = PRU_Code_Generation_Tools_2.1.x_manifest.html \
+	PRU_CodeGen_Library_2.1_0222433C-30C1-442d-B5C6-2073BD97F80F.spdx.tag
+
+define HOST_TI_CGT_PRU_EXTRACT_CMDS
+	chmod +x $(DL_DIR)/$(TI_CGT_PRU_SOURCE)
+	$(DL_DIR)/$(TI_CGT_PRU_SOURCE) --prefix $(@D) --mode unattended
+	mv $(@D)/ti-cgt-pru_$(TI_CGT_PRU_VERSION)/* $(@D)
+	rmdir $(@D)/ti-cgt-pru_$(TI_CGT_PRU_VERSION)/
+endef
+
+# Since this is largely prebuilt toolchain and likes to live in its own
+# directory, put is in $(HOST_DIR)/ti-cgt-pru
+# Packages wanting to use this toolchain need to use this path as TI's
+# standard PRU_CGT path e.g. make PRU_CGT=$(TI_CGT_PRU_INSTALLDIR)...
+
+TI_CGT_PRU_INSTALLDIR = $(HOST_DIR)/usr/share/ti-cgt-pru
+define HOST_TI_CGT_PRU_INSTALL_CMDS
+	mkdir -p $(TI_CGT_PRU_INSTALLDIR)
+	cp -dpfr $(@D)/* $(TI_CGT_PRU_INSTALLDIR)
+endef
+
+$(eval $(host-generic-package))
-- 
2.7.4

[Buildroot] [PATCH v4 2/2] pru-software-support: add library for PRU firmware

[Ash Charles]

TI provides a set of headers files and libraries useful in developing
firmware for real-time (PRU) cores embedded in some processors e.g.
AM3358.  This package stages these files for any packages creating
PRU firmware.

Note: As per [1], use commit v4.0.2 to sync with common TI Linux
      versions.

[1] http://e2e.ti.com/support/arm/sitara_arm/f/791/p/552190/2018113#2018113

Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
---
Changes v1 --> v2
 * change from staging to host package (thanks Arnout & Thomas)
 * match upstream name of pru-software-support (thanks Arnout)
 * ensured config dependencies are propagated (thanks Arnout)
 * added a hash file (thanks Arnout)
 * various little clean-ups

Changes v2 --> v3
 * add option to build examples too (suggested by Arnout & Thomas)
 * depend on ti-cgt-pru as we need it to compile

Changes v3 --> v4
 * correct dependency setup (thanks Thomas)
 * wording clarifications (thanks Thomas)

Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
---
 package/Config.in                                  |  1 +
 package/Config.in.host                             |  1 +
 package/pru-software-support/Config.in             |  6 ++++
 package/pru-software-support/Config.in.host        | 10 ++++++
 .../pru-software-support/pru-software-support.hash |  2 ++
 .../pru-software-support/pru-software-support.mk   | 37 ++++++++++++++++++++++
 package/pru-software-support/readme.txt            | 17 ++++++++++
 7 files changed, 74 insertions(+)
 create mode 100644 package/pru-software-support/Config.in
 create mode 100644 package/pru-software-support/Config.in.host
 create mode 100644 package/pru-software-support/pru-software-support.hash
 create mode 100644 package/pru-software-support/pru-software-support.mk
 create mode 100644 package/pru-software-support/readme.txt

diff --git a/package/Config.in b/package/Config.in
index b076dfd..242d1be 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -437,6 +437,7 @@ endmenu
 	source "package/pifmrds/Config.in"
 	source "package/powertop/Config.in"
 	source "package/pps-tools/Config.in"
+	source "package/pru-software-support/Config.in"
 	source "package/pulseview/Config.in"
 	source "package/read-edid/Config.in"
 	source "package/rfkill/Config.in"
diff --git a/package/Config.in.host b/package/Config.in.host
index e244694..840313a 100644
--- a/package/Config.in.host
+++ b/package/Config.in.host
@@ -33,6 +33,7 @@ menu "Host utilities"
 	source "package/openocd/Config.in.host"
 	source "package/parted/Config.in.host"
 	source "package/patchelf/Config.in.host"
+	source "package/pru-software-support/Config.in.host"
 	source "package/pwgen/Config.in.host"
 	source "package/qemu/Config.in.host"
 	source "package/sam-ba/Config.in.host"
diff --git a/package/pru-software-support/Config.in b/package/pru-software-support/Config.in
new file mode 100644
index 0000000..5f0c4af
--- /dev/null
+++ b/package/pru-software-support/Config.in
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_PRU_EXAMPLES
+	bool "pru-software-support"
+	select BR2_PACKAGE_HOST_PRU_SOFTWARE_SUPPORT
+	help
+	  PRU firmware examples extracted from TI's PRU software support
+	  package. See readme.txt for installation details.
diff --git a/package/pru-software-support/Config.in.host b/package/pru-software-support/Config.in.host
new file mode 100644
index 0000000..98216a2
--- /dev/null
+++ b/package/pru-software-support/Config.in.host
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_HOST_PRU_SOFTWARE_SUPPORT
+	bool "host pru-software-support"
+	select BR2_PACKAGE_HOST_TI_CGT_PRU
+	help
+	  This package provides useful headers and libraries for the
+	  PRU unit found on some TI processors e.g. AM3358. Note that
+	  the included labs and examples aren't built, they can be built
+	  using the corresponding target package.
+
+	  https://git.ti.com/pru-software-support-package/pru-software-support-package
diff --git a/package/pru-software-support/pru-software-support.hash b/package/pru-software-support/pru-software-support.hash
new file mode 100644
index 0000000..8f624da
--- /dev/null
+++ b/package/pru-software-support/pru-software-support.hash
@@ -0,0 +1,2 @@
+# Locally-calculated hash
+sha256	b257535ca9b1641d1a238795f3c7004064c573a91cf4a1fa566e3f7c2360c38f	pru-software-support-804b548e69ef9fdf44445f6d0968d81cb8a1e7b4.tar.gz
diff --git a/package/pru-software-support/pru-software-support.mk b/package/pru-software-support/pru-software-support.mk
new file mode 100644
index 0000000..95d1e03
--- /dev/null
+++ b/package/pru-software-support/pru-software-support.mk
@@ -0,0 +1,37 @@
+################################################################################
+#
+# pru-software-support
+#
+################################################################################
+
+PRU_SOFTWARE_SUPPORT_VERSION = 804b548e69ef9fdf44445f6d0968d81cb8a1e7b4
+PRU_SOFTWARE_SUPPORT_SITE = git://git.ti.com/pru-software-support-package/pru-software-support-package.git
+PRU_SOFTWARE_SUPPORT_LICENSE =  BSD-3c
+PRU_SOFTWARE_SUPPORT_LICENSE_FILES = PRU_Package-v5.0-Manifest.html
+PRU_SOFTWARE_SUPPORT_DEPENDENCIES = host-ti-cgt-pru host-pru-software-support
+HOST_PRU_SOFTWARE_SUPPORT_DEPENDENCIES = host-ti-cgt-pru
+
+define HOST_PRU_SOFTWARE_SUPPORT_BUILD_CMDS
+	$(MAKE) PRU_CGT=$(TI_CGT_PRU_INSTALLDIR) -C $(@D)/lib/src
+endef
+
+# install this library support alongside PRU toolchain i.e.
+# everything in TI_CGT_PRU_INSTALLDIR as PRU_CGT
+define HOST_PRU_SOFTWARE_SUPPORT_INSTALL_CMDS
+	mkdir -p $(TI_CGT_PRU_INSTALLDIR)/usr/include
+	cp -dpfr $(@D)/include/* $(TI_CGT_PRU_INSTALLDIR)/usr/include
+	mkdir -p $(TI_CGT_PRU_INSTALLDIR)/usr/lib
+	cp -dpfr $(@D)/lib/src/*/gen/*.lib $(TI_CGT_PRU_INSTALLDIR)/usr/lib/
+endef
+
+define PRU_SOFTWARE_SUPPORT_BUILD_CMDS
+	$(MAKE) PRU_CGT=$(TI_CGT_PRU_INSTALLDIR) -C $(@D)/examples
+endef
+
+define PRU_SOFTWARE_SUPPORT_INSTALL_TARGET_CMDS
+	mkdir -p $(TARGET_DIR)/usr/share/pru-software-support
+	cp -dpfr $(@D)/examples/* $(TARGET_DIR)/usr/share/pru-software-support/
+endef
+
+$(eval $(generic-package))
+$(eval $(host-generic-package))
diff --git a/package/pru-software-support/readme.txt b/package/pru-software-support/readme.txt
new file mode 100644
index 0000000..60175f2
--- /dev/null
+++ b/package/pru-software-support/readme.txt
@@ -0,0 +1,17 @@
+PRU Software Support
+====================
+Two different packages are provided from the TI PRU software support code base.
+1. The include files and rpmsg static library for the PRU are installed
+   alongside the host package for the PRU code generation tools package i.e.
+   $(TI_CGT_PRU_INSTALLDIR).
+2. A target package for all the examples installed to
+   /usr/share/pru-software-support/.  Users wanting to test a specific example
+   should copy or link it to a directory where the kernel looks for firmware
+   e.g. (at the root command prompt on the target)
+
+ # cp /usr/share/pru-software-support/am335x/PRU_gpioToggle/gen/PRU_gpioToggle.out \
+   /lib/firmware/am335x-pru0-fw
+
+To get started with the PRU, have a look at the labs [1].
+
+[1] http://processors.wiki.ti.com/index.php/PRU_Training:_Hands-on_Labs
-- 
2.7.4

[Buildroot] [PATCH v4 1/2] ti-cgt-pru: add package for PRU Host toolchain

[Thomas Petazzoni]

Hello,

On Thu,  1 Dec 2016 23:22:40 -0500, Ash Charles wrote:
> TI provides a binary code generation toolchain to develop firmware for
> the programmable real-time unit/co-processor found in some SOCs such as
> some models in the AM335x line. This toolchain includes C/C++ support
> (clpru) rather than just assembler (pasm) supported by the pre-existing
> am335x-pru-package [1].  Following the lead of the Yocto meta-ti
> layer [2], this package provides a host toolchain suitable for an x86
> (or x86_64) Linux targeting an ARM-based PRU core.
> 
> [1] http://processors.wiki.ti.com/index.php/PRU_Assembly_Instructions#pasm_vs._clpru
> [2] http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/tree/recipes-ti/devtools/ti-cgt-pru_2.1.1.bb
> 
> Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
> ---
> Changes v1 --> v2
>  * extract source to $(@D) cleanly (suggested by Thomas)
>  * be more explicit about licensing (suggested by Arnout)
>  * switch to buildroot-suitable name: PRU_CGT --> TI_CGT_PRU_DIR
>  * sundry clarifications

Applied to master, after doing the following change:

    [Thomas: add BR2_PACKAGE_HOST_TI_CGT_PRU_ARCH_SUPPORTS boolean option,
    so that packages selecting host-ti-cgt-pru can easily inherit its
    architecture dependencies.]

Also, could you send a patch that adds yourself to the DEVELOPERS file
for both the ti-cgt-pru and the pru-software-support packages?

Thanks!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH v4 2/2] pru-software-support: add library for PRU firmware

[Thomas Petazzoni]

Hello,

On Thu,  1 Dec 2016 23:22:41 -0500, Ash Charles wrote:
> TI provides a set of headers files and libraries useful in developing
> firmware for real-time (PRU) cores embedded in some processors e.g.
> AM3358.  This package stages these files for any packages creating
> PRU firmware.
> 
> Note: As per [1], use commit v4.0.2 to sync with common TI Linux
>       versions.
> 
> [1] http://e2e.ti.com/support/arm/sitara_arm/f/791/p/552190/2018113#2018113
> 
> Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
> ---
> Changes v1 --> v2
>  * change from staging to host package (thanks Arnout & Thomas)
>  * match upstream name of pru-software-support (thanks Arnout)
>  * ensured config dependencies are propagated (thanks Arnout)
>  * added a hash file (thanks Arnout)
>  * various little clean-ups

Applied to master, with the following changes:

    [Thomas:
     - rename BR2_PACKAGE_PRU_EXAMPLES to
    BR2_PACKAGE_PRU_SOFTWARE_SUPPORT, since the package directory name
    should match the Config.in option for this package
     - use select for BR2_PACKAGE_HOST_TI_CGT_PRU, and therefore add the
       appropriate "depends on
    BR2_PACKAGE_HOST_TI_CGT_PRU_ARCH_SUPPORTS".]

Thanks!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com