* [Buildroot] [PATCH] board/atmel/readme.txt: fix typo
@ 2017-02-24 10:47 Luca Ceresoli
2017-02-24 10:59 ` Thomas Petazzoni
0 siblings, 1 reply; 2+ messages in thread
From: Luca Ceresoli @ 2017-02-24 10:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
---
board/atmel/readme.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/atmel/readme.txt b/board/atmel/readme.txt
index 0b6634687e3e..ab7f2ba281e2 100644
--- a/board/atmel/readme.txt
+++ b/board/atmel/readme.txt
@@ -44,7 +44,7 @@ using SAM-BA" section below.
For the Xplained boards, an alternative Buildroot configuration is
provided to boot from an SD card. Those configurations are labeled as
'mmc'. In this case, after building Buildroot, follow the instructions
-in the "Preparting the SD card" sction.
+in the "Preparting the SD card" section.
To configure and build Buildroot, run:
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [Buildroot] [PATCH] board/atmel/readme.txt: fix typo
2017-02-24 10:47 [Buildroot] [PATCH] board/atmel/readme.txt: fix typo Luca Ceresoli
@ 2017-02-24 10:59 ` Thomas Petazzoni
0 siblings, 0 replies; 2+ messages in thread
From: Thomas Petazzoni @ 2017-02-24 10:59 UTC (permalink / raw)
To: buildroot
Hello,
On Fri, 24 Feb 2017 11:47:53 +0100, Luca Ceresoli wrote:
> +in the "Preparting the SD card" section.
Actually, there was another typo in there: Preparting -> Preparing.
I've fixed that as well, and applied to master. Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-02-24 10:59 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-02-24 10:47 [Buildroot] [PATCH] board/atmel/readme.txt: fix typo Luca Ceresoli
2017-02-24 10:59 ` Thomas Petazzoni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox