* [Buildroot] [autobuild.buildroot.net] Build results for 2017-03-05
@ 2017-03-06 7:28 Thomas Petazzoni
2017-03-06 21:00 ` Yann E. MORIN
0 siblings, 1 reply; 5+ messages in thread
From: Thomas Petazzoni @ 2017-03-06 7:28 UTC (permalink / raw)
To: buildroot
Hello,
Build statistics for 2017-03-05
================================
successes : 173
failures : 13
timeouts : 0
TOTAL : 186
Classification of failures by reason
====================================
libepoxy-1.4.1 | 3
putty-0.68 | 2
polarssl-1.2.19 | 1
qemu-2.8.0 | 1
qt5base-5.8.0 | 1
rabbitmq-c-v0.8.0 | 1
samba4-4.5.5 | 1
slang-2.3.0 | 1
vpnc-b1243d29e0c00312ead038... | 1
xserver_xorg-server-1.19.2 | 1
Detail of failures
===================
arm | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/48c35bac7cf674e2bc55f9bd53b905ad5e212258
i686 | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/e29a22a2d9c81c87d271c2a6e7d041d36c370adc
sh4a | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/6cc1212728248d5443fe9a367b4aeb3807ce623e
powerpc | polarssl-1.2.19 | NOK | http://autobuild.buildroot.net/results/ab3565f6585e47573bcb62ef5e7250986c90d8e3
arm | putty-0.68 | NOK | http://autobuild.buildroot.net/results/3ade64119e327cc810282c1bcd89a8e7d229a73f
arm | putty-0.68 | NOK | http://autobuild.buildroot.net/results/3c26267f46f0653f2d40e03e5e4212e58e7ce177
i686 | qemu-2.8.0 | NOK | http://autobuild.buildroot.net/results/5a685a307678bbcfd87c6f1bd44b5648b4d397f9
arm | qt5base-5.8.0 | NOK | http://autobuild.buildroot.net/results/29aa34c4e3b10739a13db6d86b3f0691668480e9
powerpc | rabbitmq-c-v0.8.0 | NOK | http://autobuild.buildroot.net/results/8ac322af1293eb195f2eab80bdfe1b87931948b6
arc | samba4-4.5.5 | NOK | http://autobuild.buildroot.net/results/2e214d6b2de1008858f4129e8000dd1202302117
arm | slang-2.3.0 | NOK | http://autobuild.buildroot.net/results/256ffb34fa890bae23ff39783006e0741e2abc49
arm | vpnc-b1243d29e0c00312ead038... | NOK | http://autobuild.buildroot.net/results/16a7c30f0627c51b171ec71b2e7f24444e38526d
arm | xserver_xorg-server-1.19.2 | NOK | http://autobuild.buildroot.net/results/4c24477f96c9eab8cfd8cce38eea630d738e29a5
--
http://autobuild.buildroot.net
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [autobuild.buildroot.net] Build results for 2017-03-05
2017-03-06 7:28 [Buildroot] [autobuild.buildroot.net] Build results for 2017-03-05 Thomas Petazzoni
@ 2017-03-06 21:00 ` Yann E. MORIN
2017-03-06 23:01 ` Thomas Petazzoni
2017-03-07 19:18 ` Peter Seiderer
0 siblings, 2 replies; 5+ messages in thread
From: Yann E. MORIN @ 2017-03-06 21:00 UTC (permalink / raw)
To: buildroot
All,
On 2017-03-06 08:28 +0100, Thomas Petazzoni spake thusly:
> Detail of failures
> ===================
>
> arm | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/48c35bac7cf674e2bc55f9bd53b905ad5e212258
This is again caused by a mismatch between types defined by Khronos and
those in odroid-mali.
> i686 | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/e29a22a2d9c81c87d271c2a6e7d041d36c370adc
> sh4a | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/6cc1212728248d5443fe9a367b4aeb3807ce623e
EGL not found...
> powerpc | polarssl-1.2.19 | NOK | http://autobuild.buildroot.net/results/ab3565f6585e47573bcb62ef5e7250986c90d8e3
Static linking issue: polarssl build a 'benchmark' utility that links
with -lcrypto, which uses symbols fron libz, but libz is not pulled in
in a static build.
> arm | putty-0.68 | NOK | http://autobuild.buildroot.net/results/3ade64119e327cc810282c1bcd89a8e7d229a73f
> arm | putty-0.68 | NOK | http://autobuild.buildroot.net/results/3c26267f46f0653f2d40e03e5e4212e58e7ce177
Should be fixed by:
https://git.buildroot.org/buildroot/commit/?id=18275a0420fd39817ea01e30f5d815c78dc72cc0
> i686 | qemu-2.8.0 | NOK | http://autobuild.buildroot.net/results/5a685a307678bbcfd87c6f1bd44b5648b4d397f9
error: 'struct timex' has no member named 'tai'
uClibc toolchain: fields missing? Not available in uClibc?
> arm | qt5base-5.8.0 | NOK | http://autobuild.buildroot.net/results/29aa34c4e3b10739a13db6d86b3f0691668480e9
error: failure memory model cannot be stronger than success memory model
for '__atomic_compare_exchange'
return __atomic_compare_exchange_n(&_M_i, &__i1, __i2, 0, __m1, __m2);
Some atomic issue?
> powerpc | rabbitmq-c-v0.8.0 | NOK | http://autobuild.buildroot.net/results/8ac322af1293eb195f2eab80bdfe1b87931948b6
Static linking issue, again missing -lz.
> arc | samba4-4.5.5 | NOK | http://autobuild.buildroot.net/results/2e214d6b2de1008858f4129e8000dd1202302117
This is caused by the ARC Synopsys toolchain which has a uClibc without
support for quota.
> arm | slang-2.3.0 | NOK | http://autobuild.buildroot.net/results/256ffb34fa890bae23ff39783006e0741e2abc49
undefined reference to `tputs'
Static linking issue, needs to link against ncurses.
> arm | vpnc-b1243d29e0c00312ead038... | NOK | http://autobuild.buildroot.net/results/16a7c30f0627c51b171ec71b2e7f24444e38526d
undefined reference to `libintl_bindtextdomain'
Static linking issue, needs -lintl.
> arm | xserver_xorg-server-1.19.2 | NOK | http://autobuild.buildroot.net/results/4c24477f96c9eab8cfd8cce38eea630d738e29a5
Download issue due to certificate error. Ignore.
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [autobuild.buildroot.net] Build results for 2017-03-05
2017-03-06 21:00 ` Yann E. MORIN
@ 2017-03-06 23:01 ` Thomas Petazzoni
2017-03-07 13:51 ` Gustavo Zacarias
2017-03-07 19:18 ` Peter Seiderer
1 sibling, 1 reply; 5+ messages in thread
From: Thomas Petazzoni @ 2017-03-06 23:01 UTC (permalink / raw)
To: buildroot
Hello,
Thanks for the analysis of those build failures! Some comments below.
On Mon, 6 Mar 2017 22:00:32 +0100, Yann E. MORIN wrote:
> > arm | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/48c35bac7cf674e2bc55f9bd53b905ad5e212258
>
> This is again caused by a mismatch between types defined by Khronos and
> those in odroid-mali.
These are gone, odroid-mali is marked as broken.
> > i686 | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/e29a22a2d9c81c87d271c2a6e7d041d36c370adc
> > sh4a | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/6cc1212728248d5443fe9a367b4aeb3807ce623e
>
> EGL not found...
Gustavo, could you have a look?
>
> > powerpc | polarssl-1.2.19 | NOK | http://autobuild.buildroot.net/results/ab3565f6585e47573bcb62ef5e7250986c90d8e3
>
> Static linking issue: polarssl build a 'benchmark' utility that links
> with -lcrypto, which uses symbols fron libz, but libz is not pulled in
> in a static build.
polarssl should use pkg-config to discover OpenSSL.
> > arm | putty-0.68 | NOK | http://autobuild.buildroot.net/results/3ade64119e327cc810282c1bcd89a8e7d229a73f
> > arm | putty-0.68 | NOK | http://autobuild.buildroot.net/results/3c26267f46f0653f2d40e03e5e4212e58e7ce177
>
> Should be fixed by:
> https://git.buildroot.org/buildroot/commit/?id=18275a0420fd39817ea01e30f5d815c78dc72cc0
Correct.
> > i686 | qemu-2.8.0 | NOK | http://autobuild.buildroot.net/results/5a685a307678bbcfd87c6f1bd44b5648b4d397f9
>
> error: 'struct timex' has no member named 'tai'
>
> uClibc toolchain: fields missing? Not available in uClibc?
This is fixed by 2ae688f0f0f79f54d1ca18824251cdc683e1a07f, but I
haven't rebuilt all the uClibc toolchains yet, I'll try to do so
tomorrow.
> > powerpc | rabbitmq-c-v0.8.0 | NOK | http://autobuild.buildroot.net/results/8ac322af1293eb195f2eab80bdfe1b87931948b6
>
> Static linking issue, again missing -lz.
Not only, there's also some missing -lintl.
The missing -lz can be fixed by using pkg-config to discover OpenSSL
(can be done by a person knowledgeable in CMake).
The missing -lintl is more annoying, because it's never encoded in .pc
files anyway.
> > arc | samba4-4.5.5 | NOK | http://autobuild.buildroot.net/results/2e214d6b2de1008858f4129e8000dd1202302117
>
> This is caused by the ARC Synopsys toolchain which has a uClibc without
> support for quota.
We should add an exception then.
> > arm | slang-2.3.0 | NOK | http://autobuild.buildroot.net/results/256ffb34fa890bae23ff39783006e0741e2abc49
>
> undefined reference to `tputs'
>
> Static linking issue, needs to link against ncurses.
Does libreadline provide a pkg-config file?
> > arm | vpnc-b1243d29e0c00312ead038... | NOK | http://autobuild.buildroot.net/results/16a7c30f0627c51b171ec71b2e7f24444e38526d
>
> undefined reference to `libintl_bindtextdomain'
>
> Static linking issue, needs -lintl.
Yeah, this -lintl thing is really a pain. I'll try to work on a
proposal to get rid of it.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [autobuild.buildroot.net] Build results for 2017-03-05
2017-03-06 23:01 ` Thomas Petazzoni
@ 2017-03-07 13:51 ` Gustavo Zacarias
0 siblings, 0 replies; 5+ messages in thread
From: Gustavo Zacarias @ 2017-03-07 13:51 UTC (permalink / raw)
To: buildroot
On 2017-03-06 20:01, Thomas Petazzoni wrote:
>> > i686 | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/e29a22a2d9c81c87d271c2a6e7d041d36c370adc
>> > sh4a | libepoxy-1.4.1 | NOK | http://autobuild.buildroot.net/results/6cc1212728248d5443fe9a367b4aeb3807ce623e
>>
>> EGL not found...
>
> Gustavo, could you have a look?
Hi.
It seems newer libepoxy requires egl even if you've got libgl.
I'll check with upstream if that's really the case and adjust the
package or patch libepoxy (again) otherwise.
>> > powerpc | polarssl-1.2.19 | NOK | http://autobuild.buildroot.net/results/ab3565f6585e47573bcb62ef5e7250986c90d8e3
>>
>> Static linking issue: polarssl build a 'benchmark' utility that links
>> with -lcrypto, which uses symbols fron libz, but libz is not pulled in
>> in a static build.
>
> polarssl should use pkg-config to discover OpenSSL.
polarssl should go down the drain, i'll refresh the patch to do so.
Regards.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [autobuild.buildroot.net] Build results for 2017-03-05
2017-03-06 21:00 ` Yann E. MORIN
2017-03-06 23:01 ` Thomas Petazzoni
@ 2017-03-07 19:18 ` Peter Seiderer
1 sibling, 0 replies; 5+ messages in thread
From: Peter Seiderer @ 2017-03-07 19:18 UTC (permalink / raw)
To: buildroot
On Mon, 6 Mar 2017 22:00:32 +0100, "Yann E. MORIN" <yann.morin.1998@free.fr> wrote:
>
> > arm | qt5base-5.8.0 | NOK | http://autobuild.buildroot.net/results/29aa34c4e3b10739a13db6d86b3f0691668480e9
>
> error: failure memory model cannot be stronger than success memory model
> for '__atomic_compare_exchange'
> return __atomic_compare_exchange_n(&_M_i, &__i1, __i2, 0, __m1, __m2);
>
> Some atomic issue?
>
See [1]...
Regards,
Peter
[1] http://lists.busybox.net/pipermail/buildroot/2017-March/186151.html
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-03-07 19:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-03-06 7:28 [Buildroot] [autobuild.buildroot.net] Build results for 2017-03-05 Thomas Petazzoni
2017-03-06 21:00 ` Yann E. MORIN
2017-03-06 23:01 ` Thomas Petazzoni
2017-03-07 13:51 ` Gustavo Zacarias
2017-03-07 19:18 ` Peter Seiderer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox